Sie sind auf Seite 1von 4

For Tender

RENOVATION WORKS

Job Name :

Job Description

Client's Name:

Item

Item Description

Quantity

Unit

No.

Rate

Mark

Amount

Up %

Trade :

9 BILL NO.1 - RENOVATION WORKS TO BATHROOM 3

Note:
The Tenderer is required to visit the site to inspect
the construction of the structure, etc to be
demolished, adjacent property, to ascertain from the
Authorities the presence of underground cables,
service pipes, safety precaution and protection
requirement, etc as claims on ground of lack of
knowledge of the above shall not be entertained
Location of demolition works as per drawings no.
NZA/13004 EA/TD/ARCH/B/01-REV00
INTERIOR - GROUND FLOOR
Bathroom 3
Demolition and removing works
1 Demolish existing brick walls (all thickness) and all at
it; making good all works disturbed; making good;
extending finishings disturbed and carting away debris
to contractor's own dump (approximately 15.0 m2)
2 Removing existing floor finished (All type) including
screed; cleaning off for new finishing (approximately
6.0m2)
3 Clean existing wall for new finishing (approximately
5.0m2)
4 Clean existing ceiling for new finishing (approximately
17.0m2)
5 Removing fitting and fixtures prior to demolition;
carting away to contractor's own dump; all fittings and
equipments.
New work below lowest floor finish (WBLFF)

15.00 m2

6 New vibrated reinforced concrete ground beam


including all necessary works such excavation, lean
concrete, concrete, reinforcement, formwork; and all to
Engineer's details (assume size 250mm x 450mm thick)

2.00 m

7 New vibrated reinforced concrete slab including all


necessary works such excavation, hardcore, lean
concrete, concrete, reinforcement, formwork, damp
proof membrane; and all to Engineer's details (assume
150mm thick)
New frame works

2.00 m2

8 New vibrated reinforced concrete column including all


necessary works such concrete, reinforcement,
formwork; and all to Engineer's details (assume size
250mm x 250mm x 2900mm height)

1.00 no

BUILDSOFT EDUCATIONAL
FOR EDUCATIONAL PURPOSES ONLY

6.00 m2

15.00 m2
6.00 m2
Item

Page :

of

Date of Printing: 29/Mar/15

Global Estimating System (32 Bit) - J

For Tender
Job Name :

RENOVATION WORKS

Job Description

Client's Name:

Item

Item Description

Quantity

Unit

No.

Rate

Mark

Amount

Up %

Trade :

(Continued)

9 BILL NO.1 - RENOVATION WORKS TO BATHROOM 3

9 New vibrated reinforced concrete suspended beam


including all necessary works such concrete,
reinforcement, formwork; and all to Engineer's details
(assume size 250mm x 450mm thick)
New brickworks

2.00 m

Common brick in cement mortar (1:3) as described


including one layer of brick reinforcement 'exmet' at
every fourth course and pointing as approved and
including 6mm diameter mild steel bonding ties
450mm long one end hooked and casted into
brickwall or concrete as described :10 110mm thick brickwall

16.00 m2

Damp Proof Course


11 Bituminous felt damp proof course as described laid
horizontally on half brickwall, well lapped at joints and
including 18mm cement and sand (1: 3) as described
coated with hot bitumen (measured net - no allowance
made for laps)
New doors and windows

7.00 m

New vibrated reinforced concrete lintol including all


necessary works such concrete, reinforcement,
formwork; and all to Engineer's details (assume size
125mm wide x 225mm thick)
12 To window type W_1a (1 no)

1.00 m

13 To door type D_5 (2 no)

2.00 m

Supply and fix complete in position the following all


in powder coated aluminium window unit complete
with aluminium frame and sub-frame, transome,
mullion, glazing beads, weather strip and all other
accessories including building in or cutting and
pining lugs, bolting and bedding frames in cement
mortar (All aluminium components shall be the
minimum thickness of 1.20mm thick) all to
manufacturer's specification and Architect's
approval :14 Top hung casement window complete with clear glass
panel (measured separately) overall size 850mm wide x
500mm high (Type W_1a)
Glass Panel

1.00 no

15 6mm Thick tinted glass as described including glazing


beads not exceeding 0.50m2.
Toilet Door

BUILDSOFT EDUCATIONAL
FOR EDUCATIONAL PURPOSES ONLY

1.00 m2

Page :

of

Date of Printing: 29/Mar/15

Global Estimating System (32 Bit) - J

For Tender
Job Name :

RENOVATION WORKS

Job Description

Client's Name:

Item

Item Description

Quantity

Unit

No.

Rate

Mark

Amount

Up %

Trade :

(Continued)

9 BILL NO.1 - RENOVATION WORKS TO BATHROOM 3

16 Supply and fix in position single leaf 13mm thick high


pressure laminate phenolic board with melamine resin
impregnated decorative paper on both sides overall size
850mm wide x 2400mm high complete with aluminium
frames, ironmongeries, painting and accessories all in
accordance with manufacturer's specification and
Architect's approval (Type D_5).
New internal finishes

1.00 no

300mm x 600mm 'Code AT360000G Kimgress Plain


White gloss finish up to 3m high with 2 rows of
100x200mm 'Terracotta 12201 Terracotta Tiles
Centre Sdn. Bhd.' bevelled porcelain tiles bedded,
jointed and pointed in white or coloured cement in
approved pattern including 12mm thick cement and
sand (1:3) screed as described :17 To wall and column

30.00 m2

300mm x 600mm 'Code h704Z Leo Bisque matte


finish' porcelain tiles bedded, jointed and pointed in
white or coloured cement in approved pattern
including 12mm thick cement and sand (1:3) screed
as described :18 To floor

10.00 m2

Asbestos Free Cellulose Fibre Cement Panel Ceiling


19 3.2mm Thick; 610mm x 1220mm 'UCO Superflex'
approved asbestos free cellulose fibre cement ceiling
panel with 3mm butt joint fixed on pressure treated
grade 'B' timber ceiling joint and other accessories not
exceeding 3.50m.
20 Extra Over for forming access panel size 600mm x
600mm including necessary framing.
Prepare and apply approved one coat of alkali
resisting primer and two coats emulsion paint as
described :21 To ceiling panel

10.00 m2

1.00 no

10.00 M2

Supply and fix the following sanitary appliances and


accessories in standard colour or other approved
equivalent and including storing, assembling,
bedding, plugging and screwing with matching
screws, cutting and pinning or building in bracket,
jointing and connecting to services, soil and waste
pipe and making good works disturbed all to S.O's
approval :-

BUILDSOFT EDUCATIONAL
FOR EDUCATIONAL PURPOSES ONLY

Page :

of

Date of Printing: 29/Mar/15

Global Estimating System (32 Bit) - J

For Tender
Job Name :

RENOVATION WORKS

Job Description

Client's Name:

Item

Item Description

Quantity

Unit

No.
Trade :

Rate

Mark

Amount

Up %
(Continued)

9 BILL NO.1 - RENOVATION WORKS TO BATHROOM 3

22 Johnson Suisse Sheffield - Elongated close coupled


washdown pedestal water closet in approved vitreous
china complete with plastic seat and cover with 'S' or 'P'
trap with pan colar and water seal including vitreous
china cistern (6.L) with integral mechanism including
fittings, plugging and screwing cistern support brackets
to tile wall.
23 Johnson Suisse Yale - Overall size 420mm x 555mm;
complete with PVC bottle trap and standard waste
outlet fitting plug and chain and accessories all in
accordance with manufacturer's specification.
24 Rigel - FC104DP - 6 liter concealed water closet flush
valve; push button with 700mm x 300mm 'L' pipe &
inlet spud.
25 Rigel - Kepler SA3000 (Hand Bidet) - Chrome hand
bidet cbrome plated angle valve with lever handle
complete with flange.
26 Rigel BA 102 - Single robe hook with door stoppper

1.00 no

27 Rigel Kepler SH007C - Chrome shower plated arm and


flange complete with all accessories and fittings
28 Johnson Suisse WBBRSP000 - Semi recessed soap
holder; white overall size 165mm x 165mm x 95mm
29 Rigel ST FB 102 - Stainless steel floor trap with cover
overall 150mm x 150mm.
30 Rigel BA 110 - Single towel bar

1.00 no

31 Rigel SA507L - Chrome plated pillar mounted basin tap


with mounted basin tap with lever handle; 1/4 turn c/w
1pcs white washer; 1pcs washer nut.
32 On completion of the sanitary fittings, test all piping
and make good any defects and leave in perfect working
order to the entire satisfaction of the Architect.
BILL NO.1 - RENOVATION WORKS TO BATHROOM 3

1.00 no

BUILDSOFT EDUCATIONAL
FOR EDUCATIONAL PURPOSES ONLY

1.00 no

1.00 no

1.00 no

1.00 no

1.00 no
1.00 no
1.00 no

Item

Total :

Page :

of

Date of Printing: 29/Mar/15

Global Estimating System (32 Bit) - J

Das könnte Ihnen auch gefallen