Beruflich Dokumente
Kultur Dokumente
Personal statement
To seek the challenging position in Automation Software industry that needs
innovation, creativity, dedication and enable me to continue to work in a
challenging and fast paced environment, leveraging my current knowledge and
fostering creativity with many learning opportunities .
Employment History
LabVIEW Developer, Tech Mahindra Ltd. , Pune
(July 2014 April 2015)
Software
Tools
Project
Description
Responsibili
ties
Project II
Software
Tools
Hardware
Project
Description
Responsibili
ties
Project III
Software
Tools
Project
Description
Responsibili
ties
Project IV
Software
Tools
Project
Description
Responsibili
The application select the TDMS files which are the Test Data
and this Data needs to be Automated Analysed for PROX, LASH,
Hot Strain Valve Analysis, Valve Strain Guide Analysis, Valve
Strain Tip Analysis
Developing LabVIEW application to analyze the data by using
the LabVIEW as user interface and DIAdem used to do the
analysis of the data.
Latch Response
NI LabVIEW (Ver:2013)
USB Compact DAQ
The application used to acquire data and analysis the data in
runtime
Developing LabVIEW application to acquire the data and
analyze the data.
Create User Guide for the particular application.
VCBU Flashing Utility CANOpen
NI LabVIEW (Ver:2013)
The Application flashes the binary files to the STM8 board and
calling VB files to flash the binary to ATMEL Board
Developing LabVIEW application to Flash the binary file to
STM8 or ATMEL through CAN protocol.
Create User Guide for the particular application.
WDF File Converter
NI LabVIEW (Ver:2013), NI DIAdem 2012
The application have to convert the WDF files to TDMS files to
be used in Data Analysis Application
Developing the application using LabVIEW .
ties
Project V
Software
Tools
Project
Description
Responsibili
ties
Waterfall Plots
NI LabVIEW (Ver:2013), NI DIAdem 2012
The Application need to be plotted in the waterfall type graph
where we can select the files and displays the entire graph
Developing the application using LabVIEW .
Project I
Tools used
Standard
Project
Description
Developing
a
robust
model-based
engineering
framework for safety critical applications
Matlab/Simulink
(Ver:
8.1.0.604
(R2013a)),
LDRA(Ver:9.2.0),, ReqZ tool (Ver 1.0, In-house tool),
Mutation tool (Ver:1.0, In-house), AbsInt Astree (Ver:
14.04)
RTCA DO-178C, MAAB standards
We are working towards developing a robust model-based
engineering framework for safety critical applications. Proven
system is used as a case-study to develop this framework.
Stall warning/ aircraft interface computer, Cockpit Display and
Pitch Auto Trim (PAT) is used as a case study. The critical
functionality of this application is developed in Simulink
according to MAAB standard and with in-house developed
mutation tool, we generate test cases. The simulink generates
auto code from the model and the code is run in LDRA tool to
generate test cases. The robustness of the framework is
demonstrated by applying it for critical functionalities of safety
critical applications and verifying the auto generated test cases
from requirement stage to validation stage.
Tools used
Standard
Project
Description
Project
Software
Tools
NI LabVIEW (Ver:2011)
Hardware
Responsibili
ties
NI PXI, Pressure Transducers (4-20mA), Flow Meter (420mA), Control Valve (4-20 mA), Pressure Calibrator,
Thermocouple (K-Type).
Developing LabVIEW program for data acquisition of the R&D
experiment conducted.
Responsible for all instrumentation work , calibration of Mass
flow meter(Emerson Process Management), Pressure
transmitter, Thermocouples.
Designing and process controlling of the experiment.
Data acquisition for the R&D experiment characterize spray
droplets
Education
Degree
M.TECH in
VLSI DESIGN &
EMBEDDED SYSTEM
B.TECH in
ELECTRONIC &
INSTRUMENTATION
ENGINEERING
Institute
New Horizon College of Engineering,
Bangalore
Visvesvaraya Technological University,
Karnataka
From Amrita School of Engineering,
Bangalore
Amrita Vishwa Vidayapeetham University,
Coimbatore
Certification
Certified LabVIEW Associate Developer (CLAD)
Serial No : 100-314-1072
Year of
Passing
2013
2009
Paper Publication
A Research paper entitled Development of infotainment for monitoring traffic
rules and driver authentication is presented in National Conference on Recent
Advance in Electronic & Communication held on 24 th May 2013 at New Horizon
College of Engineering, Bangalore.
A Research paper entitled Development of Poly-silicon CVD Reactor is
presented in International Conference on System Dynamics and Control
(ICSDC2010) Conference held during 19-22 nd Aug., at Manipal Institute of
Technology, Manipal, KN.
Software Expertise
Operating
System:
Application
Software:
Programming
Language:
Tool Software:
Personal Details
DOB : 28/08/1986
Marital Status : Unmarried
Fathers Name: Joseph Mathew
Passport No: H8897243
Nationality : Indian
Sex : Male
Hometown :Bangalore
Declaration
I hereby declare that all the information furnished above is true to the best of my
knowledge and belief.
Thank you
Place: Bangalore
Date:
Sibin K Mathew