Beruflich Dokumente
Kultur Dokumente
ST120
Measurement Principle
The ST120 uses an inclinometer to accurately measure the taper. Sensor
output voltage is proportional to the narrow face slope (taper). The gauge
calculates the actual scaled distance that the top of the narrow face is set
back from the bottom narrow face.
The gauge uses an LCD display for viewing taper with easy to
read digits for the operator in English or Metric units. To
access configuration and calibration setups, simply plug in a
standard PC keyboard into the back of the unit. A display
Menu appears on the screen which is used to access the
setup, diagnostics and calibration menus.
The latest design of the ST120 incorporates and a
breakthrough in gauge power and performance. A Lithium Ion
18v battery is used to supply power to the gauge. These Offthe-shelf batteries and chargers can be found at local
hardware stores which eliminate the need for expensive
repairs. The batteries have an auto shut-off feature protecting
them against failure and can be fully charged in 25 minutes.
KEY FEATURES
BENEFITS
www.SequenceTechnologies.com
Email: john@SequenceTechnologies.com