Beruflich Dokumente
Kultur Dokumente
Features:
for precision measurement by use of a dial gage.
2. Many types are available for selection to suit various conditions ol measuring places.
3. A tool can be secured to a round steel bar by utilizing the V grooves on the attractive face.
1. This is a holding device designed
Holding power:
1.The holding power will drop on thin oblects.
2.The holding power will drop on materials other than mild steel plates.
3.The holding power will drop on attractive faces that are rough or dirty with dust or painbd.
4.The holding power in the sideways direction is much smaller than that in the perpendicular
attractinq on a vertical surface.
soecial care when attracting
direction. Exercise a special
machinery.
5.The attracted objectrt tends to slip and come off due to vibration of macl
A strong magnetic
lield is produced:
lf
precision equipment such as watches and magnetic cards are brought close the
magnetic base,their functions may be damaged.
x lf the magnetic base is brought close to medical equipment such as pace makers,there is a
hazard ol impeding their operation.
A slrong magnetic torce is produced:
x lf the inagn-etic base is brought close to an iron plate inadvertently,it is affracted by a
strong holding power abruptly,causing injury such as pinching fingers. 0bserve safety
precautions such as wearing gloves.
* Prior to bringing the magnetic base close to kon,make sure it is 0FF.
Priorto putting the magnetic base in practical use,check if it has a sufficient holding power
for the intended application by trying it on an object to attract.
Hold the magnetic itself when turning it 0FF.
inadvertently,the magnetic foree will be lost
abruptly, causing such accidents as falling and overturning. Be sure to hold the body with
both hands to operate the 0N-0FF knob.
OFF
KANE'TEG CO.,LTD.
Manufactured by KANETEC (CHINA)