Beruflich Dokumente
Kultur Dokumente
Benefits
Cost effective
CL 0.2 accuracy
EU manufactured
Modbus communications
Fully configurable
Applications
Motor control centres
Energy/building management
systems
Switchgear
Generators sets
3-phase 4-wire unbalanced
Standards
IEC 61326
IEC 61010-1
IEC 62053-21
EN60688
RoHS Compliant
Dimensions
100 x 70 x 118 mm
3.94 x 3.11 x 4.65
Weight 0.42 kg
Single-phase
energy.te.com
TE Connectivity
Input Parameters
Specification
Input
Nominal input voltage
57.7V - 277V AC L-N (100 -480V L-L)
480V MAX
Max. continuous input
120% of nominal
overload voltage
Max. short duration input
2 x nominal voltage
voltage (300 msec)
Nominal input voltage burden
< 0.5VA per phase
Nominal input current
1A AC or 5A AC rms
Max. continuous input
2 x nominal voltage
overload current
Max. short duration input
20 x nominal current
current (300 msec)
Auxiliary
Operating range
80-260V AC/DC (+/- 10%) 45-66Hz, 6VA
or
20-60V AC/DC (+/- 10%) 45-66Hz, 6VA
Supply burden
6 VA
Accuracy
Voltage (V)
< 0.2%
Current (A)
< 0.2%
Neutral current calculated (A) < 1.0%
Frequency (Hz)
< 0.1 Hz
Power factor (PF)
1% of unity
Active power (W)
+/- 0.2% of range
Reactive power (VAr)
+/- 0.2% of range
Apparent power (VA)
+/- 0.2% of range
Active energy (kWh)
Class 0.2 (IEC 62053-21)
Reactive energy (kVArh)
+/- 0.2% of range
Response time
<200 msec
Range
Voltage (V)
5% to 120% for nominal
Current (A)
5% to 120% of nominal
Frequency
45-65 Hz
THD
up to 31st harmonic
Outputs
Analogue output
0... +/- 1mA
0... +/- 5mA
0... +/- 10mA
0... +/- 20mA
4... +/- 20mA
0... +/- 1V
2... +/- 10V
All programmable
Pulse/alarm output relay
User defined solid state relay
Pulse/alarm contact rating
100mA at 250V
Pulse duration
30msec to 1000 msec
Alarm delay
0-120 secs
Alarm hysteresis
1 - 99%
Alarm type
User Defined Solid State Relay
Communication protocol
RS485 Modbus RTU
Type
2-wire half duplex
Baud rate
9600, 19200, 38400
Enclosure
Enclosure style
DIN-rail mounting
Dimensions
100 x 79 x 118mm
Material
Polycarbonate to UL94-V0
Weight
0.42kg
Terminals
Shrouded screw-clamp 0.05-4mm wire
Environment
Operating temperature
-10C to +55C
Storage temperature
-30C to +70C
Relative humidity
0-90% non-condensing
Shock
30g in 3 planes
Vibration
10Hz to 50Hz
Dielectric voltage Withstand test 4kV, 50Hz for 1 minute
between auxiliary/input/output
Product Codes
Product codes
Part number
Paladin Advantage
Options
Auxiliary
80-260V AC/DC (+/- 10%) 45-66Hz, 6VA
20-60V AC/DC (+/- 10%) 45-66Hz, 6VA
Analogue Outputs
Two programmable outputs
Four programmable outputs
254-XZZ
energy.te.com
254-XZZ-M
254-XZZ-L
254-XZZ-*-02
254-XZZ-*-04
Button Id
Description
Voltage VL1
VL2
VL3
2VL12
VL23
VL31
AVG V12
V23 V31
AVG V1N
V2N V3N
DELTA V
DELTA VN
Current IL1
IL2
IL3
IN
AVG I1 I2 I3
DELTA I
I1 MAX
I2 MAX
I3 MAX
I1 AVG
I2 AVG
I3 AVG
Active P
Power P1
P2
P3
PMAX
PAVG
Reactive Q
Power Q1
Q2
Q3
Apparent S
Power S1
S2
S3
Power PF
Factor PF AVG
PF1
PF2
PF3
ANGLE SYS ANGLE
ANGLE L1
ANGLE L2
ANGLE L3
FREQ
THD
THDV1
THDV2
THDV3
THD I1
THD I2
THD I3
COSPHI COSPHI 1
COSPHI 2
COSPHI 3
Volts L1 - N
Volts L2 - N
Volts L3 - N
Volts L1 - L2
Volts L2 - L3
Volts L3 - L1
Average Vvlt
- age (L-L)
Average Vvltage (L-N)
Volts diff L-L
Volts diff L-N
Current L1
CurrentL2
Current L3
Neutral I
Average
Current
Current diff
I1 Max demand
I2 Max demand
I3 Max demand
Average I1
Average I2
Average I3
System power
Power L1
Power L2
Power L3
Max power
Average power
System VAr
Systme VAr L1
System VAr L2
System VAr L3
System VA
System VA L1
System VA L2
System VA L3
Power factor
Average PF
PF L1
PF L2
PF L3
System Angle
Phase Angle L1
Phase Angle L2
Phase Angle L3
Frequency
THD V1
THD V2
THD V3
THD I1
THD I2
THD I3
Displacememnt
P.F
Displacememnt
P.F
Displacememnt
P.F
About TE Connectivity
While TE has made every reasonable effort to ensure the accuracy of the information in this catalogue, TE does not guarantee that it is error-free, nor does TE make any other representation,
warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without
notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a
particular purpose. The dimensions in this catalogue are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult
TE for the latest dimensions and design specifications. TE connectivity (logo), TE (logo) and TE Connectivity are trademarks of the TE Connectivity Ltd. family of companies. Crompton is a
trademark of Crompton Parkinson and is used by TE Connectivity under a licence. Other logos, product and company names mentioned herein may be trademarks of their respective owners.
2014 TE Connectivity family of companies. All Rights Reserved.
TE Energy innovative and economical solutions for the electrical power industry: cable accessories, connectors & fittings,
insulators & insulation, surge arresters, switching equipment, street lighting, power measurement and control.
Tyco Electronics UK Ltd
TE Energy
Freebournes Road
Witham, Essex CM8 3AH
Phone: +44 (0)870 870 7500
Fax: +44 (0)870 240 5287
Email: Crompton.info@te.com
www.crompton-instruments.com
energy.te.com
Registered office:
Faraday Road, Dorcan
Swindon, SN3 5HH
Reg. no. 550 926
CI-EPP-2149-04/14_TRANSD_ADV
TE Connectivity is a global, $14 billion company that designs and manufactures over
500,000 products that connect and protect the flow of power and data inside the
products that touch every aspect of our lives. Our nearly 100,000 employees partner
with customers in virtually every industry from consumer electronics, energy and
healthcare, to automotive, aerospace and communication networks enabling
smarter, faster, better technologies to connect products to possibilities.