Sie sind auf Seite 1von 7

International Journal of Application or Innovation in Engineering & Management (IJAIEM)

Web Site: www.ijaiem.org Email: editor@ijaiem.org


Volume 4, Issue 4, April 2015

ISSN 2319 - 4847

Performance Evaluation of WIMAX Network


with High QOS Services Incorporating
Different Physical & Mac Layer Standards
1.

Anita Mishra, NehaMarria2, Harsukhpreet Singh3


1

PIT,PTU,Jalandhar,Punjab,India

College of Engineering & Management, Assistant Professor, PTU, Kapurthala, Punjab,India


3

CTIT, Assistant Professor ,PTUJalandhar,Punjab,India

ABSTRACT
VoIP application of Worldwide Interoperatability microwave access (WiMAX) is a broadly deployed technology and has a great
impact in field of 4th generation networks. Main advantage of this technology is utilization of existing infrastructure in the
form of internet connection. There are several QoS classes for VoIP application in IEEE 802.16 systems, such as unsolicited
poll grant, rtPS, nrtPS, Ertps and BE. The major issue in VoIP is quality of service. In order to send better quality in voice data
s5ome factors like delay, jitter, throughput, packet delivery ratio and mean opinion score (MOS) need to be improved so as to
maintain the performance of this application in WiMAX.The proposed idea required no modification of the framework of IEEE
802.16 system and we have analyzed and discussed the performance of the quality of service classes recommended in the IEEE
802.16 system and compared it with proposed approach.The approach proposed in the thesis considers the parameters of Peak
Sustained Traffic Rate and Orthogonal Frequency Division Multiplexing (OFDM) frame duration to improve the quality of
service for VoIP. The simulation of VoIP has been done with Peak Sustained Traffic Rate OFDM frame duration with these
parameters values the performance metrics delay, network load and jitter have been improved which in turn has enhanced the
performance of existing Extended Real Time Polling Service.

Keywords:-VoIP, MOS, rtPS, nrtPS, Ertps, QoS, OFDM

1.INTRODUCTION
The increasing demand for large capacity and higher transmission speeds to accommodate for data intensive
multimedia in conjunction with real time applications, the wireless network have experienced an explosive growth in
last few years [1-2]. WiMAX stands for Worldwide Inter- Portability for Microwave Access can be a communication
technologyfor easily delivering high speed data rates to large geographical area using orthogonal frequency division
multiplexing(OFDM) from Base Station(BS) to Subscriber Station(SS) which mitigates noise, multipath and
interference effects[3-4]. The WiMAX network is a combination of BS and SS. Here the packets are transferred from
source node to destination node after following various scheduling, modulation technique and routing technique. In
compliance with IEEE 802.16 the maximum range of WiMAX network is 50 km from the BS, where the responsibility
of the base station of providing the air interface to the master stationwith supplementary functions that may be part of
the BS are micro mobility management functions, traffic classification, tunnel establishment, QoS policy enforcement,
key management, DHCP proxy, multicast group management and session management. The receiver and antenna could
be a small box or personnel computer Memory Card International Association (PCMCIA) card or a laptop[5-6].
With the introduction of 4G technology in WiMAXoffering a metropolitan area network services that can use one or
more BS and each BS provide the service to the users up to 50 km radius for spreading broadband wireless data over
spacious geographical area. WiMAX offer high speed, flexible, inexpensive and last mile services with performance
similar to those of wire line infrastructure T1, DSL, cable modem based connections, optical fiber orcopperware with a
number of QoS needs. WiMAX provide wide area coverage and QoS capabilities for applications ranging from real
time delay-sensitive Voice Over Internet Protocol(VoIP) to real time streaming video and non-real time downloads,
ensuring that subscribers obtain the performance they expect for all types of communication with a bandwidth support
of up to 10 MHz[7-8].based on IEEE 802.16 standards, WiMAX provide up to 30 miles broadband access to mobile
users having a telecommunication etiquette offering full access to mobile internet across cities and countries with a
wide range of devices. WiMAX technology is offering very high speed broadband access to mobile internet. Generally
10MHz with the TDD scheme provides 3:1 up and down link ratio. The architecture of WiMAX technology is based on
MAC layer which is a connection oriented layer. Through MAC layer a user can perform a variety of functions such as
various types of applications including multimedia and voice can be used. it also supports best efforts for data traffic as
bit, real time, traffic flaws etc. the aim of design WiMAX technology is to facilitate large number of user with a variety
of connection per terminal[9-10].

Volume 4, Issue 4, April 2015

Page 183

International Journal of Application or Innovation in Engineering & Management (IJAIEM)


Web Site: www.ijaiem.org Email: editor@ijaiem.org
Volume 4, Issue 4, April 2015

ISSN 2319 - 4847

This paper is divided into five sections. Some introductory application and characteristics area of WiMAX technology
are presented in Section 1 followed by Section 2 that presents the QoS needs and IEEE 802.16 QoS scheduling schemes
of WiMAX technology, proposed methods and flow chart present in section 3 and in section 4 simulations results are
shown and finally, the conclusion is reported in Section 5.

2.QOS AND IEEE 802.16 QOS SCHEDULING SCHEME


QoS is a spacious and unbound term that refers to the collective effect of service, as perceived by the user. QoS more
barely refers to meeting certain necessity typically, packet delivery ratio, throughput, network load, packet error rate,
jitter, and delay associated with a given application. WiMAX networks must support a diversity of applications, such as
video, voice, multimedia and data and each of these has different traffic patterns and QoS necessity [20].The QoS is
granted on the basis of type of application and service under consideration. For example, a user sending an email needs
no real-time data stream like another user having a Voice over IP (VoIP) application. To provide the service parameters
respectively, the traffic management is necessary. There are four main service classes named as UGS, rtPS, nrtPS, BE
but there is a fifth type QoS service class which is added in 802.16e standard, named as: extended real-time Polling
Service (ertPS). These services are prioritized in decreasing order. Within all these classes of services resources are
allocated to manage and satisfy the QoS of higher priority services. In general, IEEE 802.16 has five QoS classes [7].
Table 1 broadly classifies various service classes defined in WiMAX and its applications.
Table I.QoS Classes in WiMAX
Service classes

Description

Application
s

Unsolicited Grant
service(UGS)

For constant Bit rate


and delay dependent
applications

VOIP

Real Time Polling


Service (rtPS)

For variable rate and


delay dependent
applications

Streaming
audio , video

Extended Real time


Service (ertPS)

For variable rate and


delay dependent
applications

VOIP and
Silence
Suppression

Variable and non


real time
applications

FTP

Best effort

Email , Web
,Traffic

Non real time


polling service
(nrtPS)
Best Effort (BE)

UGS:Unsolicited Grant Service is design to support real time service flow which generates the fixed size data packet
periodically. In this algorithms BS assign fixed size grant to the subscriber station. The grants assign are basically of
two type i.e. grant size and grant period. When voice session is initialized then these values are conciliated. These
grants are sufficient for sending data packets.
Advantages of UGS: this service minimize the MAC overhead and uplink access delay which are caused when SS
make request to the BS for bandwidth request to send the voice data packets.
Disadvantages of UGS:UGS assign fixed size grant for sending voice data packets but voice user do not always have
voice data packet to send because they have period of silence and it cause a waste of uplink resources.
rtPS: Real time polling service are designed to support real time services which generally generates variable size
data packets periodically. BS assign uplink resources to the SS when voice session is initialized then these values are
conciliated.
Advantages: In this algorithm the SS request the BS for bandwidth of suitable size grant so that the rtPS can transport
data more efficiently as compare to UGS algorithms.
Disadvantages: Because the SS always made a request for Bandwidth to the BS which in turn can cause more MAC
overhead and uplink access delay as compare to UGS algorithms.
ertPS: Extended Real Time Polling Services algorithm is proposed in order to remove the shortcomings of both
UGS and rtPS algorithms. The UGS approach allows BS to assign fixed size grants to voice users which leads to
wastage of uplink resources during the silent period when voice users do not have any datato send. Meanwhile rtPS

Volume 4, Issue 4, April 2015

Page 184

International Journal of Application or Innovation in Engineering & Management (IJAIEM)


Web Site: www.ijaiem.org Email: editor@ijaiem.org
Volume 4, Issue 4, April 2015

ISSN 2319 - 4847

although meant for variable size data packets consumes much of the time in polling process and also account for MAC
overhead.

3.PROPOSED METHODOLOGY

Volume 4, Issue 4, April 2015

Page 185

International Journal of Application or Innovation in Engineering & Management (IJAIEM)


Web Site: www.ijaiem.org Email: editor@ijaiem.org
Volume 4, Issue 4, April 2015

ISSN 2319 - 4847

4.SIMULATION SCENARIO AND RESULTS


Using OPNET 14.5 simulator, we have designed and investigated WiMAX scenario with network size of [20*20 km]
with 45 number of fixed nodes. The work is demonstrated using high network traffic load i.e. with VOIP applications
for simulation interval of 5 minutes.

Fig 1: WiMAX Network Scenario


Table II: SIMULATION PARAMETERS for WiMAX
BS Transmit Power (W)

0.5

Traffic Load

VoIP

No. Of subcarrier stations

45

Base Station MAC

22

Address
SS Station MAC Address

Auto Assigned

WiMAX Efficiency Mode

Physical Layer Enable

BS, SS Antenna Gain

15, 14 dBi

Channel Bandwidth

20MHz

OFDM Sub-carriers

512

Frame Duration

5 ms

3.1 Performance Results


After a number of simulations, the following results were gathered. Based upon these results, a detailed analysis is
presented. QoS on WiMAX network is analyzed through simulation metrics. The metrics which we taken are below: Delay: Delay or latency could be defined as the time taken by the packet to reach from source to the destination. The
results are shown graphically as:

Volume 4, Issue 4, April 2015

Page 186

International Journal of Application or Innovation in Engineering & Management (IJAIEM)


Web Site: www.ijaiem.org Email: editor@ijaiem.org
Volume 4, Issue 4, April 2015

ISSN 2319 - 4847

Fig.2 End-to-End Delay Vs Transmission time


Jitter: packet delay variance or jitter could be termed as the variation in delay or packet delay variation. The value of
jitter is calculated from the end to end delay. It is the variation in the time between packets arriving. The results are
shown graphically as:

Fig.3 WiMAX Voice Jitter Vs Transmission Time


Network Load: In a computer network the load is a measure of the amount of computational work that a computer
system performs. The aim of the network load balancing to optimize resources use, maximize throughput, minimize
response time and avoid overload of any one of the resources.The results are shown graphically as:

Fig. 4 Network Load Vs Transmission Time

Volume 4, Issue 4, April 2015

Page 187

International Journal of Application or Innovation in Engineering & Management (IJAIEM)


Web Site: www.ijaiem.org Email: editor@ijaiem.org
Volume 4, Issue 4, April 2015

ISSN 2319 - 4847

Table III:Comparison of Proposed Method with the Existing QoS classes

Delay (msec.)
Network Load
(kbps)

BE

ertPS

nrtPS

rtPS

Optimized
ertPS

29.8564

28.29403

30.81272

30.95195

9.426373

1293.727

1320.678

1309.426

1308.483

1157.256

0.112636

0.111381

0.218629

0.150197

0.006079

Jitter (msec.)

5.CONCLUSION
Measurement of Quality of Service is critical for any WiMAX network. The WiMAX network must assemble a
number of quality of service parameters including low delay, jitter , network load, high throughput and packet delivery
ratio. Today in broadband wireless access the observation is that as adoption grows, so does the need for guaranteeing a
good QoS. The issues of QoS there have become a critical area of concern for supplier of broadband wireless access
equipment and their customers too. In this paper we have conducted general simulation to estimate the performance of
WiMAX for supporting VoIP traffic we have analyzed several important critical paramerts such as end-to end delivery,
jitter and network load. Simulation results shows that we have obtained low delay, jitter and network load.

REFERENCES
[1] Andrews; J.G; A. Ghosh and R. Muhamed, 2007. Fundamentals of WiMAX: Understanding Broadband Wireless
Networking. Prentice Hall, Englewood Cliffs, NJ.
[2] Cicconetti, C.; Lenzini, L.; Mingozzi, E.; Eklund, C., "Quality of service support in IEEE 802.16
networks," Network,
IEEE ,
vol.20,
no.2,
pp.50,55,
March-April
2006
doi: 10.1109/MNET.2006.1607896
[3] Chakraborty, M. and D. Bhattacharyya, 2010, Overview of End-to-end WiMAX Network Architecture ,WiMAX
Security and Quality of Service, Head, Department of Information Technology, Institute of Engineering and
Management, Salt Lake, Kolkata, India.
[4] Grnsund, P. and P. Engelstad, 2007. The physical performance and path loss in a fixed WiMAX deployment. In:
Mohsen, G. and C. Hsiao-Hwa. Proceeding of International Wireless Communications and Mobile Computing
Conference (IWCMC07). Honolulu, Hawaii, USA.
[5] Grondalen, O.; Gronsund, P.; Breivik, T.; Engelstad, P., "Fixed WiMAX Field Trial Measurements and
Analyses," Mobile and Wireless Communications Summit, 2007. 16th IST , vol., no., pp.1,5, 1-5 July 2007
doi: 10.1109/ISTMWC.2007.4299213
[6] Grewal, V. and A.K. Sharma, 2010. On performance evaluation of different QoS mechanisms and AMC scheme
for an IEEE 802.16 based WiMAX network. Int. J. Comp. Appl., 6(7).
[7] Howon Lee; Taesoo Kwon and Dong-Ho Cho, An Enhanced Uplink scheduling Algorithm based on Voice
Activity for VoIP Services in IEEE 802.16d/e System, IEEE communication letters, Vol. 9, No. 8, August 2005.
[8] IEEE Std. 802.16, 2004 . IEEE Standard for local and metropolitan area networks Part16: Air Interface for Fixed
Broadband Wireless Access Systems. ISBN: 0-7381-4070-8.
[9] IwanAdhicandra, Measuring Data and VoIP Traffic in WiMAX Networks ,journal of telecommunications,
volume 2, issue 1, april 2010
[10] Ibrahim A. Lawal; AbasMd Said and AbubakarAminuMuazu, Simulation Model to Improve QoS Performance
over Fixed WiMAX using OPNET , Research Journal of AppliedSciences, Engineering and Technology 6(21):
3933-3945, 2013. ISSN: 2040-7459; e-ISSN: 2040-7467, Maxwell Scientific Organization, 2013
[11] Martufi; G.K.; M. Neves; P.M. Curado; M. Castrucci; P. Simoes; E. Piriand and K. Pentikousis, 2008. Extending
WiMAX to new scenarios: Key results on system architecture and test-beds of the WEIRD project.Proceedings of
the 2nd European Symposium on Mobile Media Delivery (EUMOB). Oulu, Finland.
[12] Mohammed A. Mohammed; Fayez W. Zaki; and Rania.H. Mosbah, Improving Quality of VoIP over
WiMAX,International Journal of Computer Science and Information Security, Vol.9, Issue 3, No.3, May 2012
[13] M.A.Mohammed; F.W.Zaki and A.M.Elfeki, Performance Anayysis of Scheduling Algorithms for VoIP Services
in IEEE 802.16 System,International Journal of Computer Science, Vol.9, Issue 6, No.3, November 2013
[14] Nee, R.V. and R. Prasad, 2009. OFDM for Wireless Multimedia Communications.Artech House Publishers,
University of Michigan U.S.A., pp: 124-130.

Volume 4, Issue 4, April 2015

Page 188

International Journal of Application or Innovation in Engineering & Management (IJAIEM)


Web Site: www.ijaiem.org Email: editor@ijaiem.org
Volume 4, Issue 4, April 2015

ISSN 2319 - 4847

[15] .Raman, B.; Chebrolu, K., "Experiences in using WiFi for rural internet in India," Communications Magazine,
IEEE ,
vol.45,
no.1,
pp.104,110,
Jan.
2007
doi:10.1109/MCOM.2007.284545
[16] R. K. Jha, A. V. Wankhede and U. D. Dalal, A Survey of Mobile WiMAX IEEE 802.16 m, International
Journal of Computer Science and Information Security, Vol. 8, No. 1, 2010, pp. 125-131
[17] R. K. Jha, A. V. Wankhede and U. D. Dalal, WiMAX System Simulation and Performance Analysis under the
Influence of Jamming, International Journal of Scientific Research, Vol. 1, No. 1, 2010, pp. 20-26.
[18] Rakesh, K., J. Idris, Z. Bholebawa and D. Upena, 2011. Location based performance of WiMAX network for QoS
with optimal BSs. Wirel. Eng. Technol., 2: 135-145.
[19] S. Sengupta, M. Chatterjee and S. Ganguly, Improving Quality of VoIP Streams over WiMAX, IEEE Transactions on Computers, Vol. 57, No. 2, 2008, pp. 145-156. doi:10.1109/TC.2007.70804
[20] Safa, M. and M. Watfa, 2009. Quality of Service in Wireless Local and Metropolitan Area Networks.Auerbach
Publications, CRC Press, Taylor and Francis Publishers.
[21] Vikram ,M. and
Dr.Neena Gupta, 2012. Performance Analysis of QoS Parameters for Wimax
Networks.International Journal of Engineering and Innovative Technology (IJEIT)
[22] UpenaD.Dalal and Y.P.Kosta,2009. WiMAX New Development .

Volume 4, Issue 4, April 2015

Page 189

Das könnte Ihnen auch gefallen