Beruflich Dokumente
Kultur Dokumente
GLOBAL SERVICES
Course
Description
SNRx10
On-Machine Radio
Trimble S3
Total Station
This document is for informational purposes only and is not a legally binding agreement or offer.
Trimble makes no warranties and assumes no obligations or liabilities hereunder.
Trimble Navigation Limited, Global Services Business Area, 10368 Westmoor Drive, Westminster, CO 80021, USA
2014, Trimble Navigation Limited. All rights reserved. Trimble, the Globe & Triangle logo, are trademarks of Trimble Navigation Limited, registered in the
United States and in other countries. All other trademarks are the property of their respective owners.
www.trimble.com
Page 1
Course
Description
GCS 300-600
Repair Authorized
GCS 900/MS9XX
Repair Authorized
Completion of the RF
Theory Prerequisite Exam(1)
Previous Trimble CU
Controllers Repair
Authorized
Trimble CU (Model 3)
Controller
www.trimble.com
Page 2
Course
Trimble TSC3/Ranger 3
Description
Trimble TSC2/Ranger
Repair Authorized
Completion of the RF
Theory Prerequisite Exam(1)
or completion of the TDL
450L training
GCS 900/MS9XX
Repair Authorized
www.trimble.com
Page 3
Course
Description
SPSx5x Receivers
SPSx6x Receivers
SPSx20 Receivers
TSC2 / Ranger
www.trimble.com
Page 4
Course
Description
Note Information
(1) An administrator will automatically register technician for the prerequisite exam once approvals are
established. Access to the Trimble TDL450L Radio training course will be given once the prerequisite exam
is passed. Both can be viewed from the technicians My Training page on the learning center.
(2) If your Dealership has no technician(s) authorized and trained on the S series Total Stations, you will need
to attend the classroom prerequisite training. Please refer to the Service Training Schedule for ILT
classroom dates.
Online Prerequisite Training Agenda:
Part1
Part2
www.trimble.com
Page 5
Part3
(3) Previous Service Repair Authorized is defined as: Technician has been trained and has
Authorization/Certification to repair Trimble products by attending service repair training. New
Dealer/Technicians that have no previous experience/training will be required to attend hands-on
classroom training at a Trimble Regional Service Center.
www.trimble.com
Page 6