Beruflich Dokumente
Kultur Dokumente
2100
12/07
10/05
Section
Bulletin
Issued
Replaces
Direct Reading
PENBERTHY
Liquid Level Gages and Gagecocks
TABLE OF CONTENTS
Flat Glass Gages
Flat Glass Gages Overview ..................................................................................4-7
Low Pressure Flat Glass Gages: Models RL & TL .................................................... 8
Medium Pressure Flat Glass Gages: Models RM & TM, RMR & TMR ...................... 9
High Pressure Flat Glass Gages: Models RH & TH, RHR & THR ..............................10
Large Chamber Flat Glass Gages: Models RLC & TLC ............................................11
Weld Pad Flat Glass Gages: Models RMW & TMW..................................................12
Dimensions for Process Glass................................................................................13
Ultra High Pressure Flat Glass Gages: Model TU ....................................................14
Steam/Water Flat Glass Gages: Models TSL, TSL-F, TSM, TSM-F ..........................15
Gagecocks
Gagecocks Overview........................................................................................22-23
Flat Glass Gagecocks: Series 100, 200..................................................................24
Flat Glass Gagecocks: Series 300, 400..................................................................25
Flat Glass Gagecocks: Series 500..........................................................................26
Flat Glass Gagecocks: Series 700..........................................................................27
OS&Y Fugitive Emission Gagecocks: Series 550, 750 ............................................28
Flat Glass Gagecocks: Series 600..........................................................................29
Tubular Glass Gagecocks: Series N2, K2................................................................30
Tubular Glass Gagecocks: Series K3 ......................................................................31
Tubular Glass Gagecocks: Series N6......................................................................32
Tubular Glass Gagecocks: Series N7......................................................................33
Accessories
Graph-a-BondTM Gaskets ......................................................................................20
Protectors, Extensions,
Heating & Cooling Devices, Valves & Fittings ........................................................34
Gasketed Union Tailpipes ......................................................................................21
Copyright Pentair
Table of Contents
Armored
Flat Glass
Gages
Cover
Gasket
Glass
Chamber
Pressure retaining element which
provides rigidity to the gage assembly
and a means to connect the gage to
isolation gagecocks or other vessel
connections.
Bolts
Cushion
Gasket
Seals the gap and prevents leaking
between the glass and the chamber.
Glass
Contains the process liquid and provides
the viewing window to the process liquid
level.
Cushion
Protects the glass from mechanical stress
points by acting as a buffer between the
glass and cover.
Cover
Standard
Gasket
Chamber
Recessed
Gasket
Chamber
Bolts/Studs/Nuts
Properly torqued gage bolting applies a
uniform compressive load to the gage
assembly for pressure retaining purposes.
Reflex
Transparent
Copyright Pentair
5
Multiple Section
Gages
To meet visible glass lengths greater
than Size 9 glass (12.625 [321 mm]),
Penberthy stacks covers along the
length of the single chamber. The
maximum operating pressure and
temperature ordinarily determine the
largest glass size that can be used.
3-section gage
on continuous
chamber
Continuous vision
single-section gages
on standpipe
Multiple
section gages
on standpipe
Gage Connections
End, side and back (typically reflex
only) connections can be machined
into the gage chamber to provide end
users with desired center to center
Gage Connections
Side
Connect
Back Connect
End
Connect
Copyright Pentair
6
Reflex and
Transparent Gages
Reflex
Transparent
Copyright Pentair
7
Armored Gages
Armored flat glass gages give users
the ability to visually inspect liquid
characteristics (color, particulate,
striations, turbulence) and monitor
relative fill or drain rates in a variety of
applications where vibration,
temperature and/or pressure extremes
rule out level technologies.
End users interested in establishing a
reliable, easy-to-understand level
reference often use flat glass gages to
verify electronic level device output at
plant start-up or routine maintenance
(especially pressure vessels).
Illuminator Assembly
Copyright Pentair
8
Low Pressure Flat Glass Gages
for less demanding
process conditions...
Model RL
Reflex Low Pressure
Model TL
Transparent Low Pressure
Model RL
Pressure/Temperature
Standard/Optional Features
STANDARD
CONNECTION TYPE
End Connections
Model TL
Pressure/Temperature
Threaded
1/2 NPTF
3/4 NPTF
Socketweld
1/2 female
3/4 female
Flanged
Side or Back
OPTIONAL
X
X
X
X
X
(typically reflex only)
Connections
Threaded
1/2 NPTF
3/4 NPTF
Socketweld
1/2 female
3/4 female
Flanged
X
X
X
X
X
Copyright Pentair
9
Medium Pressure Flat Glass Gages
for most common
process conditions...
Model RM
Relfex Medium Pressure
Model TM
Transparent Medium Pressure
Model RM
Pressure/Temperature
Standard/Optional Features
Model TM
Pressure/Temperature
CONNECTION TYPE
End Connections
Threaded
1/2 NPTF
3/4 NPTF
Socketweld
1/2 female
3/4 female
Flanged
STANDARD
OPTIONAL
X
X
X
X
X
Copyright Pentair
X
X
X
X
X
X
10
High Pressure Flat Glass Gages
Heavy duty
construction for high
pressure resistance...
Model RH
Reflex High Pressure
Model TH
Transparent High Pressure
Model RH
Pressure/Temperature
Standard/Optional Features
Model TH
Pressure/Temperature
STANDARD
CONNECTION TYPE
End Connections
Threaded
X
1/2 NPTF
3/4 NPTF
Socketweld
1/2 female
3/4 female
Flanged
Side or Back (typically reflex only) Connections
Threaded
1/2 NPTF
3/4 NPTF
Socketweld
1/2 female
3/4 female
Flanged
Chambers
Recessed Gasket*
*Gages with recessed gaskets are designed with the
letter R at the end of the Model Number (i.e. RHR)
Copyright Pentair
OPTIONAL
X
X
X
X
X
X
X
X
X
X
11
Large Chamber Flat Glass Gages
for turbulent surface
or extremely
transparent liquids...
Model RLC
Reflex Large Chamber
Model TLC
Transparent Large Chamber
Model RLC
Pressure/Temperature
Standard/Optional Features
Model TLC
Pressure/Temperature
STANDARD
CONNECTION TYPE
End Connections
Threaded
1/2 NPTF
X
3/4-2 NPTF
Socketweld
1/2-2 female
Flanged
Side or Back (typically reflex only) Connections
Threaded
1/2 NPTF
3/4 NPTF
Socketweld
1/2 female
3/4 female
Flanged
OPTIONAL
X
X
X
X
X
X
X
X
Copyright Pentair
12
Weld Pad Flat Glass Gages
for direct mounting to
vessel wall...
Model RMW
Reflex Medium Weld Pad
Model TMW
Transparent Medium Weld Pad
Standard/Optional Features
FEATURE
Flat Pad
Radius Pad
2 [51 mm] min. radius through
12 [305 mm] max. radius
Isolable Gagecocks
Isolable
Gagecocks
Weld Pad
Gage
Model RMW
Pressure/Temperature
STANDARD
X
X
Model TMW
Pressure/Temperature
OPTIONAL
NOTE: Pressure/Temperature ratings shown for standard gasket, otherwise see chart on page 13.
For environmental Nace MR0175 &/or MR0103 gages, pressure de-rating is required
Copyright Pentair
13
Dimensions for Process Gages
5 Section Gage
Sections
Size 9 Glass
Gasket
Material
Buna-N
EPDM
Neoprene
Viton (FKM)
Daikin (PCTFE)
Teflon (PTFE)
Glass Size
RL/TL
RM(R)/TM(R)
RMW/TMW
1
2
3
4
5
6
7
8
9
4
5
6
7
8
9
6
7
8
9
7
8
9
7
8
9
8
9
8
9
8
9
8
9
8
9
RL
TL
RM
RMR
TM
TMR
RH
RHR
TH
THR
RLC
TLC
RMW
TMW
End Connected
Overall Length
Visible Length
inch
mm
inch
mm
3.750
4.750
5.750
6.750
7.875
9.125
10.250
11.875
12.625
15.000
17.250
19.750
22.000
25.250
26.750
30.375
33.750
38.625
40.875
45.500
52.000
55.000
57.250
65.375
69.125
78.750
83.250
92.125
97.375
105.500
111.500
118.875
125.625
132.250
139.750
95
121
146
171
200
232
260
302
321
381
438
502
559
641
679
772
857
981
1038
1156
1321
1397
1454
1661
1756
2000
2115
2340
2473
2680
2832
3019
3191
3359
3550
5.250
6.250
7.250
8.250
9.375
10.625
11.750
13.375
14.125
16.500
18.750
21.250
23.500
26.750
28.250
31.875
35.250
40.125
42.375
47.000
53.500
56.500
58.750
66.875
70.625
80.250
84.750
93.625
98.875
107.000
113.000
120.375
127.125
133.750
141.250
133
159
184
210
238
270
298
340
359
419
476
540
597
679
718
810
895
1019
1076
1194
1359
1435
1492
1699
1794
2038
2153
2378
2511
2718
2870
3058
3229
3397
3588
[38C]
250F
[121C]
300F
[149C]
400F
[204C]
500F
[260C]
300
300
300
300
300
300
[2070]
[2070]
[2070]
[2070]
[2070]
[2070]
225
225
225
225
225
225
[1550]
[1550]
[1550]
[1550]
[1550]
[1550]
210
210
210
210
210
[1450]
[1450]
[1450]
[1450]
[1450]
180
180
180
[1240]
[1240]
[1240]
150
[1030]
Copyright Pentair
Pressure/Temperature
De-Rating for Material
Other Than Standard
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
3
3
3
3
4
4
4
5
5
5
6
6
7
7
8
8
9
9
10
10
Model
14
Ultra-High Pressure Flat Glass Gages
for extraordinary
pressure and vapor
requirements...
Model TU
Pressure/Temperature
Standard/Optional Features
CONNECTION TYPE
STANDARD
OPTIONAL
End Connections
Threaded
1/2 NPTF
3/4 NPTF
Socketweld
1/2 female
3/4 female
Flanged
X
X
X
X
X
Side Connections
Threaded
1/2 NPTF
3/4 NPTF
Socketweld
1/2 female
3/4 female
Flanged
X
X
X
X
X
Dimensions
Sections Model
1
1
1
1
1
2
2
2
2
2
3
3
3
3
TU
TU
TU
TU
TU
TU
TU
TU
TU
TU
TU
TU
TU
TU
Glass
Size
1
3
4
5
7
1
3
4
5
7
3
4
5
7
inch
mm
End Connected
Overall Length
inch
mm
3.531
5.531
6.531
7.656
10.031
8.875
12.875
14.875
17.125
21.875
20.219
23.219
26.594
33.719
90
140
166
194
255
225
327
378
435
556
514
590
675
856
6.500
8.500
9.500
10.625
13.000
11.750
15.750
17.750
20.000
24.750
23.094
26.094
29.469
36.594
Visible Length
Copyright Pentair
165
216
241
270
330
298
400
451
508
629
587
663
749
929
15
Steam/Water Flat Glass Gages
for dynamic thermal
environments...
TSL Configurations
TSL
1 section
TSL
2 section
TSL
3 section
TSL-F
1 section
TSL-F
2 section
TSL-F
3 section
TSM
3 section
TSM-F
1 section
TSM-F
2 section
TSM-F
3 section
TSM Configurations
TSM
2 section
Standard/Optional Features
FEATURE
TSL
Std
Connections
Stuffing box nipple 3/4 dia.
Flanged
Expansion Loop
Mica Shields
Opt
TSL-F
Std
Opt
TSM
Std
Opt
TSM-F
Std
Opt
X
X
X
X
X
X
X
1500
1400
TSM, TSM - F =
1300
TSL, TSL - F =
Dimensions
1200
Sections Model
1100
Pressure psig
1000
Glass
Size
900
800
700
600
500
400
300
200
100
0
200
250
300
350
400
450
500
550
600
650
700
Temperature F
1
1
1
2
2
2
3
3
3
TSL
TSL-F
TSM
TSM-F
6
7
9
6
7
9
6
7
9
Visible Length
inch
mm
9.000
10.125
12.500
17.000
19.250
24.000
25.000
28.375
35.500
229
257
318
432
489
610
635
721
902
Stuffing Box
Nipple
Copyright Pentair
TSM
1 section
16
2&3
Three-part coating
applied to individual parts
prior to gage assembly
controls corrosion-except
on hardware
Three-part coating as
applied by Penberthy
provides true offshore
protection
Exposed Glass
Exposed Glass
Exposed Glass
Exposed Glass
Other U.S.
Manufacturer
European
Manufacturer
Japanese
Manufacturer
Latin American
Manufacturer
Copyright Pentair
17
Polyurethane Top-Coat
(2.5 to 3 mil)
Its glossy tile-like finish dramatically upgrades
the weather resistance of the layered coatings.
Provides excellent added protection from
chemicals and abrasion as well.
18
Tubular Glass Gages
for cost effective
level indication...
Protectors
Tubular glass is susceptible to
accidental breakage. To counteract
this condition, Penberthy offers a
variety of protectors. These
protectors prevent damage to the
glass, but do not restrict level
indication capability. In some cases
the protector actually enhances it.
Protectors can be adapted to fit most
major manufacturers gagecocks.
Guard Rods Two or four metallic
rods placed next to the glass tube.
Plastic or Wire Glass A transparent
box surrounding the tubular glass
constructed from either clear plastic or
wire glass.
Sheet Metal Two pieces of sheet
metal formed to protect both sides of
the tubular glass. The front and back
are left open to facilitate easy viewing.
Refractive An extruded aluminum
channel with your choice of either a
polymer or glass cover. The interior
is a white anodized finish with 45
angle red stripes on the back wall. As
Wire
Guard Rod
Refractive
Protector
Refractive
Protector
(Glass Union)
Sheet
Metal
Protector
Plastic
Protector
Internal Tubes
A stainless steel internal heating or
cooling tube that passes through the
length of the tubular glass can be used
in conjunction with an offset pattern
gagecock and high pressure glass.
Wire Glass
Protector
Glass Union
Intended for use in gages over 48 in
height. It allows you to join two pieces
of glass within the same gage. This
increases the length of the gage, yet
maintains the same pressure/
temperature rating as the individual
pieces of glass. Glass unions should
be used in conjunction with the
refractive protector to provide
mechanical stability.
Glass Union
Copyright Pentair
19
Pressure/Temperature Ratings for Gages with a Single Piece of Tubular Glass (Both 5/8 and 3/4)
Psig
410
385
355
300
275
240
210
200
180
150
140
125
100
600
600
600
580
550
500
420
360
340
[2830]
[2650]
[2450]
[2070]
[1900]
[1650]
[1450]
[1380]
[1240]
[1030]
[ 970]
[ 860]
[ 690]
Heavy
Wall
High
Pressure
Psig [kPa]
[kPa]
[4140]
[4140]
[4140]
[4000]
[3790]
[3450]
[2890]
[2480]
[2340]
N/A
N/A
N/A
N/A
Red
Line
340
310
285
260
230
200
180
170
160
140
120
100
90
[2340]
[2140]
[1960]
[1790]
[1590]
[1380]
[1240]
[1170]
[1100]
[ 970]
[ 830]
[ 690]
[ 620]
310
280
265
250
345
325
315
300
[2140]
[1930]
[1830]
[1720]
[2380]
[2240]
[2170]
[2070]
275
265
260
250
[1900]
[1830]
[1790]
[1720]
NOT RECOMMENDED
Using secured Glass Unions and multiple pieces of tubular glass will increase the pressure/temperature rating over that of an
equivalent length of single glass.
Temperature Ratings for Typical Packing Material
Maximum Temperature
Packing Type
Rating F [C]
Grafoil (Standard)
425 [218]
Teflon
425 [218]
Neoprene
300 [149]
Viton
400 [204]
Glass Union
Hydraulic Adapters
Glass Type
(Both 5/8 and 3/4)
Gagecocks
Hydraulic
Adapters
Guard
Rods
Plastic or Wire
Glass Protector
Sheet
Metal
Refractive
Protector
Internal
Tube
High Pressure
Heavy Wall
Red Line
Glass Union
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Hydraulic Adapters
Hydraulic Adapters are used in place
of gagecocks for connecting the gage to
your vessel. They attach directly to
the ends of the tubular glass,
providing a 1/2 NPT male
connection. This allows you to
incorporate most standard hydraulic
connections currently available.
Hydraulic Adapter
Copyright Pentair
[ 254]
[ 381]
[ 508]
[ 635]
[ 762]
[ 889]
[1016]
[1143]
[1270]
[1397]
[1524]
[1651]
[1778]
Red
Line
Heavy
Wall
High
Pressure
Inches [mm]
10
15
20
25
30
35
40
45
50
55
60
65
70
Center to Center
Distance For Vessel
Connections
20
The Graph-a-BondTM
gasket: superior strength and
better adhesion
TM
Graph-A-Bond Gaskets
Copyright Pentair
N
EW
!
21
MODEL MATRIX
GAGE CONNECTION
VESSEL CONNECTION
X20
X21
Metal Union
Gasketed Union
X22
Gasketed Union
Metal Union
X23
Gasketed Union
Gasketed Union
X30
Rigid
X31
Rigid
Gasketed Union
If a gasket is needed on the gage connection only, use model number X22. For a vessel connection gasket only,
use model nunber X21 or X31. For gasketed gage and vessel connections, use model number X23.
Examples:
Model 423 = 400 series gagecock with gasketed union gage and vessel connections.
Model 331 = 300 series gagecock with a rigid gage connection and a gasketed union vessel connection.
Copyright Pentair
22
Gagecocks:
Flat Glass and Tubular Glass
Offset and straight
pattern designs for
flat glass and tubular
glass gages
Gagecock Connections
Spherical
Union
Gagecocks Overview
Solid
Shank
Flanged
Socket
Weld
Union
NPT-M
Gagecock Bodies
OFFSET
(x)30 Series
Offset Pattern
STRAIGHT
Copyright Pentair
23
Series 100, 200, 300, 400
and 600 Gagecocks
Standard Gagecock
Vacuum Seat
Gagecocks Overview
Backseating Stem
(Union Bonnet Gagecocks only)
Vertically Rising
Ball Check
DIMENSIONS (Tubular Glass)
To obtain the length of glass tubing needed to make up gage set for given
vessel center-to-center dimension:
Glass Tubing Length =
(Vessel Center-to-Center Dimension) - (Dimension X)
Copyright Pentair
24
Design Features
Series 100
Series 200
130
230
Standard/Optional Features
FEATURE
Straight pattern
Integral bonnet (100 series)
Union bonnet (200 series)
Union Vessel connection
Gage connection
Model 120/220 - Union
Model 130/230 - Rigid
Ball Check Shutoff
Integral seat (100 series)
Threaded renewable seat (200 series)
A variety of optional features are
available when specified.
Optional materials can be specified for
the gagecock body and trim. (Trim consists
of the stem, stem packing retainer, ball
check, and seat (200 series only)). Standard
and optional materials conform to ASTM
Specifications.
Center-to-Center
Dimensions (see p. 22)
Model
Dimension X
inches [cm]
Dimension Y
inches [cm]
120/220
130/230
5-5/8 [14.9]
2-5/8 [7.3]
3-3/8 [9.2]
3/8 [1.6]
Pattern
Straight
Bonnet
Integral
Union
Gage Connection
Union
Rigid
Socketweld
Flanged
Spherical Union
Std
X
Std
220
Opt
130
Std
230
Opt
1/2 NPTF
1/2 NPTM
3/4 NPTF
3/4 NPTM
1/2 NPTF
3/4 NPTF
1/2 Female
1/2 Male
3/4 Male
3/4 Female
Opt
X
X
X
X
X
X
X
X
1/2 NPTF
1/2 NPTM
3/4 NPTM
Std
X
Vessel Connection
1/2 NPTF
Union
1/2 NPTM
3/4 NPTM
1 NPTM (non floating)
1/2 NPTM
Solid Shank
3/4 NPTM
1 NPTM
1/2 Male
Socketweld
3/4 Male
1 Male
Flanged
1/2 NPTF
Spherical Union
1/2 NPTM
3/4NPTM
Vent/Drain Connection
1/2 NPTF
3/4 NPTF
Ball Check Shut-Off
Horizontal Lower and Upper Gagecocks
Omitted *
Vacuum - Horizontal Upper and Lower
Seat
Integral
Threaded (Renewable)
Backseating Stem
Handwheel
w/ Standard Pitch Threads
w/ Quick Closing Thread
Lever
w/ Quick Closing Thread (1/4 turn)
Pressure/Temperature
120
Opt
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Forged Steel
Stainless Steel
4000 [27580]
4000 [27580]
-20F [-29C]
psi [kPa]
100F [38C]
psi [kPa]
200F [93C]
psi [kPa]
300F [149C]
psi [kPa]
400F [204C]
psi [kPa]
500F [260C]
psi [kPa]
4000 [27580]
4000 [27580]
3900 [26890]
3815 [26300]
3730 [25720]
3525 [24300]
3355 [23130]
2620 [18060]
4000 [27580]
4000 [27580]
3900 [26890]
3815 [26300]
3730 [25720]
3525 [24300]
3355 [23130]
2755 [18990]
Copyright Pentair
25
Series 400
330
Design Features
The 300 and 400 series includes
models 320/420 and 330/430
with these standard features:
430
Standard/Optional Features
Pattern
Offset
Bonnet
Integral
Union
Gage Connection
Union
Rigid
Socketweld
Flanged
Spherical Union
Center-to-Center
Dimensions (see p. 22)
Model
Dimension X
inches [cm]
Dimension Y
inches [cm]
320/420
330/430
5-5/8 [14.9]
2-5/8 [7.3]
3-3/8 [9.2]
3/8 [1.6]
Pressure/Temperature
Std
420
Opt
Std
330
Opt
Vessel Connection
1/2 NPTF
Union
1/2 NPTM
3/4 NPTM
1 NPTM (non floating)
1/2 NPTM
Solid Shank
3/4 NPTM
1 NPTM
1/2 Male
Socketweld
3/4 Male
1 Male
Flanged
1/2 NPTF
Spherical Union
1/2 NPTM
3/4NPTM
Vent/Drain Connection
1/2 NPTF
3/4 NPTF
Ball Check Shut-Off
Horizontal Lower and Upper Gagecocks
Vertical Lower/Horizontal Upper Gagecock *
Omitted *
Vacuum - Horizontal Upper and Upper
Seat
Integral
Threaded (Renewable)
Backseating Stem
Handwheel
w/ Standard Pitch Threads
w/ Quick Closing Thread
Lever
w/ Quick Closing Thread (1/4 turn)
X
X
X
X
X
X
X
X
1/2 NPTF
1/2 NPTM
3/4 NPTM
430
Opt
X
1/2 NPTF
1/2 NPTM
3/4 NPTF
3/4 NPTM
1/2 NPTF
3/4 NPTF
1/2 Female
1/2 Male
3/4 Male
3/4 Female
Std
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Construction
Forged Steel
Stainless Steel
4000 [27580]
4000 [27580]
-20F [-29C]
psi [kPa]
100F [38C]
psi [kPa]
200F [93C]
psi [kPa]
300F [149C]
psi [kPa]
400F [204C]
psi [kPa]
500F [260C]
psi [kPa]
4000 [27580]
4000 [27580]
3900 [26890]
3815 [26300]
3730 [25720]
3525 [24300]
3355 [23130]
2620 [18060]
4000 [27580]
4000 [27580]
3900 [26890]
3815 [26300]
3730 [25720]
3525 [24300]
3355 [23130]
2755 [18990]
Copyright Pentair
Offset pattern
Integral bonnet (300 series)
Union bonnet (400 series)
Union vessel connection
Gage connection
Model 320/420 - Union
Model 330/430 - Rigid
Ball Check Shutoff
Integral seat (300 series)
Threaded renewable seat (400 series)
320
Std
Opt
FEATURE
26
Series 500
Design Features
The 500 series includes models
520 and 530 with these
standard features:
Straight pattern
Outside screw and yoke
Solid shank vessel connection
Gage connection
Model 520 - Union
Model 530 - Rigid
Ball Check Shutoff
Threaded renewable seat
Backseating stem
530
Standard/Optional Features
520
FEATURE
Pattern
Straight
OS&Y
OS&Y
Gage Connection
Union
Center-to-Center
Dimensions (see p. 22)
Model
520
530
Dimension X
inches [cm]
Dimension Y
inches [cm]
6-3/8 [16.8]
4-3/8 [11.7]
4-1/8 [11.1]
2-1/8 [6.0]
Rigid
Socketweld
Std
Std
Opt
1/2 NPTF
1/2 NPTM
3/4 NPTF
3/4 NPTM
1/2 NPTF
3/4 NPTF
1/2 Female
1/2 Male
3/4 Male
3/4 Female
X
X
X
X
X
X
X
X
X
Flanged
Spherical Union
X
X
X
X
X
X
1/2 NPTF
1/2 NPTM
3/4 NPTM
Vessel Connection (Solid Shank)
1/2 NPTM
Threaded
3/4 NPTM
1 NPTM
1/2 Male
Socketweld
3/4 Male
1 Male
Flanged
Vent/Drain Connection
1/2 NPTF
3/4 NPTF
Ball Check Shut-Off
Horizontal Lower and Upper Gagecocks
Omitted *
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Seat
Threaded (Renewable)
Backseating Stem
Handwheel
w/ Standard Pitch Threads
w/ Quick Closing Thread (1/4 turn)
Pressure/Temperature
530
Opt
X
X
X
X
X
X
Construction
-20F [-29C]
psi [kPa]
100F[38C]
psi [kPa]
200F [93C]
psi [kPa]
300F [149C]
psi [kPa]
400F [204C]
psi [kPa]
500F [260C]
psi [kPa]
550F [260C]
psi [kPa]
750F [399C]
psi [kPa]
Forged Steel
4000 [27580]
4000 [27580]
3900 [26890]
3815 [26300]
3730 [25720]
3525 [24300]
3355 [23130]
2620 [18060]
Stainless Steel
4000 [27580]
4000 [27580]
3900 [26890]
3815 [26300]
3730 [25720]
3525 [24300]
3355 [23130]
2755 [18990]
Copyright Pentair
27
Series 700
730
Standard/Optional Features
720
FEATURE
Pattern
Offset
OS&Y
OS&Y
Gage Connection
Union
Center-to-Center
Dimensions (see p. 22)
Model
Dimension X
inches [cm]
Dimension Y
inches [cm]
720
730
6-3/8 [16.8]
4-3/8 [11.7]
4-1/8 [11.1]
2-1/8 [6.0]
Rigid
Socketweld
Std
Std
780
Opt
Std
Opt
1/2 NPTF
1/2 NPTM
3/4 NPTF
3/4 NPTM
1/2 NPTF
3/4 NPTF
1/2 Female
1/2 Male
3/4 Female
3/4 Male
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Flanged
Spherical Union
1/2 NPTF
1/2 NPTM
3/4 NPTM
3/4 Adapter Diameter
Stuffing Box
Vessel Connection (Solid Shank)
Threaded
1/2 NPTM
3/4 NPTM
1 NPTM
Socketweld
1/2 Male
3/4 Male
1 Male
Flanged
Vent/Drain Connection
1/2 NPTF
3/4 NPTF
Ball Check Shut-Off
Horizontal Lower and Upper Gagecocks
Vertical Lower/Horizontal Upper Gagecocks*
Omitted *
Seat
Threaded (Renewable)
Backseating Stem
Handwheel
w/ Standard Pitch Threads
w/ Quick Closing Thread (1/4 turn)
Pressure/Temperature
730
Opt
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
-20F [-29C]
psi [kPa]
100F[38C]
psi [kPa]
200F [93C]
psi [kPa]
300F [149C]
psi [kPa]
400F [204C]
psi [kPa]
500F [260C]
psi [kPa]
550F [260C]
psi [kPa]
750F [399C]
psi [kPa]
Forged Steel
4000 [27580]
4000 [27580]
3900 [26890]
3815 [26300]
3730 [25720]
3525 [24300]
3355 [23130]
2620 [18060]
Stainless Steel
4000 [27580]
4000 [27580]
3900 [26890]
3815 [26300]
3730 [25720]
3525 [24300]
3355 [23130]
2755 [18990]
Copyright Pentair
Design Features
28
Series 550/750
750
Standard/Optional Features
550/551
FEATURE
Pattern
Straight
Offset
OS&Y
OS&Y
Gage Connection
Socketweld
Rigid
Std
750/751
Opt
Std
Opt
X
X
X
1/2 Female
3/4 Female
1/2 NPTF
3/4 NPTF
X
X
X
X
X
Flanged
Vessel Connection (Solid Shank)
1/2 Male
Socketweld
3/4 Male
1 Male
1/2 NPTM
Threaded
3/4 NPTM
1 NPTM
Flanged
Vent/Drain Connection
1/2 Female
Socketweld
3/4 Female
1/2 NPTF
Threaded
3/4 NPTF
Ball Check Shut-Off
Horizontal Lower and Upper Gagecocks
Ball Checks Omitted
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Seat
Threaded (Renewable)
Backseating Stem
Handwheel
w/ Standard Pitch Threads
w/ Quick Closing Thread (1/4 turn)
X
X
X
X
X
X
X
Pressure/Temperature
Maximum working pressure, psi [kPa] at temperatures toConstruction
-20F [-29C]
psi [kPa]
100F[38C]
psi [kPa]
200F [93C]
psi [kPa]
300F [149C]
psi [kPa]
400F [204C]
psi [kPa]
Forged Steel
4000 [27580]
4000 [27580]
3900 [26890]
3815 [26300]
3730 [25720]
Stainless Steel
4000 [27580]
4000 [27580]
3900 [26890]
3815 [26300]
3730 [25720]
Copyright Pentair
29
Offset Pattern Flat Glass Gagecocks
Pressures to 6000 psi @ +250F
[41370 kPa @ +121C]
Temperature Ranges from
-50F to +250F [-46C to +121C]
Series 600
Design Features
The 600 series includes model 630
with these standard features:
Standard/Optional Features
Pressure/Temperature
Range
Model 630 gagecocks are rated for
pressures up to 6000 psi [41370 kPa]
over a temperature range of -50F to
+250F [-46C to +121C]. Optional
o-ring materials for vessel tailpipe
can be used to increase temperature
capability.
Center-to-Center
Dimensions (see p. 22)
Model
Dimension X
inches [cm]
Dimension Y
inches [cm]
630
3-1/8 [8.6]
7/8 [2.9]
630
FEATURE
Pattern
Offset
Bonnet
Union
Rigid Gage Connection
Threaded
1/2 NPTF
3/4 NPTF
Socketweld
1/2 Female
3/4 Female
Flanged
Vessel Connection
Union
1/2 NPTM
3/4 NPTM
1 NPTM
Solid Shank
1/2 NPTM
3/4 NPTM
1 NPTM
Socketweld
1/2 Male
3/4 Male
1 Male
Flanged
Vent/Drain Connection
3/8 NPTF
1/2 NPTF
3/4 NPTF
Ball Check Shut-Off
Horizontal Lower and Upper Gagecocks
Omitted *
Seat
Threaded (Renewable)
Backseating Stem
Lever
w/ Standard Pitch Threads
w/ Quick Closing Thread (1/4 turn)
Std
Opt
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Copyright Pentair
Offset pattern
Union bonnet
Union vessel connection
Rigid gage connection
Ball Check Shutoff
Threaded renewable seat
Backseating Stem
30
Offset Pattern Tubular Glass Gagecocks
300 lb. ANSI rating - Pressures to
750 psi @ +100F [5170 kPa
@ +38C]
Temperature Ranges from
-300F to +750F [-184C to +399C]
Series N2
Series K2
Design Features
The N2 and K2 series include models
N2A/K2A, N2B/K2B and N2C/K2C with
these standard features:
Standard/Optional Features
Offset Pattern
Integral bonnet (N2 series)
Union bonnet (K2 series)
Union vessel connection
Stuffing Box gage connection
Ball check shutoff
Integral seat (N2 series)
Threaded renewable seat (K2 series)
A variety of optional features are
available when specified.
Optional materials can be specified for
the gagecock body and trim. (Trim consists of the stem, stem packing retainer,
ball check, and seat (K2 series only)).
Standard and optional materials conform
to ASTM Specifications.
Center-to-Center and
Guard Rod Dimensions
(see p. 23)
Model
All Models
Dimension X
inches [cm]
Dimension Y
inches [cm]
1-7/8 [4.8]
2-3/8 [6.0]
Pressure/Temperature
MODEL
N2A
K2A
N2B
K2B
N2C
K2C
Std Opt Std Opt Std Opt Std Opt Std Opt Std Opt
FEATURE
Pattern
Offset
Bonnet
Integral
Union
Gage Connection
Stuffing Box
5/8 Glass Diameter
3/4 Glass Diameter
Vessel Connection
Union
1/2 NPTM
3/4 NPTM
1 NPTM (non-floating)
Solid Shank
1/2 NPTM
3/4 NPTM
1NPTM
Socketweld
1/2 Male
3/4 Male
1 Male
Flanged
Spherical Union 1/2 NPTM
3/4 NPTM
Vent Connection
3/4 NPTF
Drain Connection
1/2 NPTF
Ball Check Shut-Off
Horizontal Lower and Upper Gagecocks
Vertical Lower/Horizontal Upper Gagecocks*
Omitted*
Vacuum - Horizontal Upper and Lower
Seat
Integral
Threaded (Renewable)
Backseating
Handwheel
w/Standard Pitch Threads
w/Quick Closing Threads
Lever
w/Quick Closing Thread (1/4 turn)
Guard Rods (4 per gagecock set)
1/4 [6.4 mm] diameter
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
-300F [-184C]
psi [kPa]
-20F [-29C]
psi [kPa]
675 [4650]
675 [4650]
675 [4650]
610 [4210]
750 [5170]
750 [5170]
750 [5170]
675 [4650]
500F [260C]
psi [kPa]
750F [399C]
psi [kPa]
590 [4070]
555 [3830]
400 [2760]
655 [4520]
610 [4210]
450 [3100]
Copyright Pentair
31
Offset Pattern Tubular Glass Gagecocks
300 lb. ANSI rating Pressures to
500 psi @ +100F [3450 kPa
@ +38C]
Temperature Range from
-20F to +550F [-29C to +288C]
Series K3
Design Features
Offset pattern
Union bonnet
Rigid vessel connection
Stuffing box gage connection
Ball check shutoff
Backseating stem
Drain cock furnished
Standard/Optional Features
Center-to-Center and
Guard Rod Dimensions
(see p. 23)
Model
Dimension X
inches [cm]
Dimension Y
inches [cm]
All Models
2 [5.1]
2-1/8 [5.4]
Pattern
Offset
Bonnet
Union
Gage Connection
Stuffing Box
5/8 Glass Dia.
3/4 Glass Dia.
Vessel Connection (Solid Shank)
Threaded
1/2 NPTM
3/4 NPTM
Socketweld
1/2 Male
3/4 Male
Flanged
Drain Connection
3/8 NPTF
Ball Check Shut-Off
Horizontal Lower and Upper Gagecocks
Vertical Lower/Horizontal Upper Gagecock*
Omitted*
Seat
Integral
Backseating Stem
Handwheel
w/Quick Closing Threads (1/4 turn)
Lever
Lever
Drain Cock
Furnished
Guard Rods (4 per gagecock set)
1/4 [6.4 mm] diameter
K3A
Opt
Std
K3B
Opt
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Pressure/Temperature
MODEL
Std
FEATURE
-20F [-29C]
psi [kPa]
100F [38C]
psi [kPa]
K3A
225 [1550]
225 [1550]
215 [1480]
190 [1310]
170 [1170]
150 [1030]
K3B
500 [3450]
500 [3450]
475 [3270]
425 [2930]
375 [2580]
325 [2240]
175 [1210]
300 [2070]
Copyright Pentair
360 [2480]
32
Straight Pattern Tubular Glass Gagecocks
125 lb. ANSI rating Pressures to
200 psi @ +100F [1380 kPa @
+38C]
Temperature Range from
-20F to +400F [-29C to +204C]
Series N6
Design Features
The N6 series consists of model N6A
with these standard features:
Straight pattern
Integral bonnet
Rigid vessel connection
Stuffing box gage connection
Ball check shutoff
Drain cock furnished
Standard/Optional Features
Pattern
Straight
Bonnet
Intergral
Gage Connection
Stuffing Box
5/8 Glass Dia.
Vessel Connection (Solid Shank)
Threaded
1/2 NPTM
Socketweld
1/2 Male
Flanged
Drain Connection
3/8 NPTF
Ball Check Shut-Off
Verticle Lower/Horizontal Upper Gagecock
Vertical Lower/Horizontal Upper (Steam service Seat)*
Omitted*
Seat
Integral
Handwheel
w/Standard Pitch thread
Drain Cock
Furnished
Guard Rods (2 per gagecock set)
3/16 [4.8mm] diameter
Steam Service
Series N6 gagecock sets for steam
service are available as an option.
Center-to-Center and
Guard Rod Dimensions
(see p. 23)
Model
Dimension X
inches [cm]
N6A
1-5/8 [4.1]
Dimension Y
inches [cm]
Std
FEATURE
1/2 [1.3]
N6A
Opt
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Pressure/Temperature
MODEL
N6A
200 [1380]
200 [1380]
190 [1310]
165 [1100]
125 [860]
125 [860]
Copyright Pentair
33
Straight Pattern Tubular Glass Gagecocks
Series N7
Design Features
Straight pattern
Integral bonnet
Rigid vessel connection
Stuffing box gage connection
Ball check shutoff
Integral drain cock
A variety of optional features are available
when specified.
Combinations of optional features and
materials are available. Each combination
is designated by the model number in the
Features table. Optional materials can be
specified for the gagecock body and trim.
(Trim consists of the stem, stem packing
retainer and ball check.) Standard and
optional materials are available for service
as described by ASTM Specifications.
Standard/Optional Features
Center-to-Center and
Guard Rod Dimensions
(see p. 23)
Model
All Models
Dimension X
inches [cm]
Dimension Y
inches [cm]
2 [5.1]
3/4 [1.9]
Pressure/Temperature
FEATURE
Std
Pattern
Straight
Bonnet
Intergral
Gage Connection
Stuffing Box
5/8 Glass Dia.
3/4 Glass Dia.
Vessel Connection ((Solid Shank)
Threaded
1/2 NPTM
3/4 NPTM
Socketweld
1/2 Male
3/4 Male
Flanged
Drain Connection
3/8 NPTF
Ball Check Shut-Off
Horizontal Lower and Upper Gagecocks (Iron, STL, STS)
Vertical Lower/Horizontal Upper (Bronze)
Vertical Lower/Horizontal Upper *
Omitted*
Ball Inspection Plug**
Furnished
Omitted
Seat
Integral
Handwheel
w/Standard Pitch Thread (Iron, STL, STS)
w/Quick Closing Threads (Bronze)
Drain Cock
Integral
Polished Body
Bronze
Guard Rods (4 per gagecock set)
3/16 [4.8 mm] diameter
* Acceptable for ASME Service
N7A
Opt
Std
N7B
Opt
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
MODEL
Bronze
N7A
N7B
Ducille Iron
N7A, N7B
STL, STS
N7A, N7B
200 [1380]
400 [2760]
125 [860]
250 [1720]
500 [3450]
290 [2000]
250 [1720]
500 [3450]
500 [3450]
500 [3450]
125 [860]
250 [1720]
350 [2410]
500 [3450]
Copyright Pentair
350 [2410]
34
Other Accessories . . .
An internal heating or cooling tube is
offered for tubular and flat glass gages. The
tube passes through the inside of the gage
and is in direct contact with the liquid.
Frost-Free Sizing
Tubular gages and end connect & side connect flat glass gages with
offset pattern gagecocks, internal tube and packing adapters
Style
Single male
Male/male
Male/female
Female/female
Frost-proof extensions
Drain cocks
Lowest Temperature
Size
-30 F [-35 C]
-94 F [-70 C]
-148 F [-100 C]
-211 F [-135 C]
-274 F [-170 C]
-328 F [-200 C]
2
4
6
8
10
12
Try cock
Drain valve
Gage scale
Insulation Blanket
NPT
1/8 1/4 3/8
X
X
X
X
X
X
X
X
Represented By:
Copyright Pentair
NE
W
!
33
Approvals
FM approved
Division 1 and 2
The standard illuminator rating is 60 watts
Class I, B,C,D
at 115Vac. Other illuminators are listed in
Class II, E,F,G
the Optional Models Structure table below.
Class III, Type 4, T4
CSA certified Ex d
Division 1 and 2
Class I, B,C,D
Class II, E,F,G
Class III, Type 4, T4
CENELEC
EExd IIB + H2 T4, IP66
EXAMPLE: Standard illuminator for doulble section size 7 flat glass gage (2TM7) with 60 watt lamp and 115 volt service
I = Illuminator
6
2 = 25w - pigtail leads
3 = 25w - terminal block
6 = 60w - pigtail leads
7 = 60w - terminal block