Beruflich Dokumente
Kultur Dokumente
As'salam.... hari ni saya nak share masalah printer canon mp287 error kod E16. Dan kod
kod error lain bagi printer canon mp287..
There are simple error as out of paper, paper jammed to complex problems that need
attention ofauthorized service center when using your Canon MP287 printer. After you
bought it, you have 1 year warranty or can extend up to 3 years (due to promos) of free
service and charge, so you have a peace of mind.
But for some reason to save money, you use refill ink and CISS (Continuous Ink Supply
System) and the warranty is now void, the problem and errors start to appear frequently
and giving you headache but don't panic because simply restarting your printer will save
you and if not, try this troubleshooting tips and guides.
How to Fix and Troubleshoot Canon Pixma MP287 Printer Error Codes
When your printer Alarm lamp is lit Orange and error code is displayed on
LED,
3. E04 or E05: The FINE Cartridge cannot be recognized. The cartridge are not
installed properly or not compatible.
SOLUTION --> Try to remove the FINE cartridge and install again and push the
cartridge locking cover until it clicks into place. If not resolved, contact your authorized
service center.
6. E13: The remaining ink level cannot be detected. The ink may have RUN OUT.
SOLUTION --> Replace the ink with new genuine Canon ink cartridge. If you want to
continue printing without this function, press the printer STOP/RESET button for at
least 5 seconds. Note: Canon shall not be liable for any malfunction due to ink out of
condition.
Use your installed Canon Pixma MP287 On Screen Manual for Troubleshooting Guide
8. E15: The FINE Cartridge cannot be recognized. The cartridge are not installed
properly.
SOLUTION --> Try to remove the FINE cartridge and install again and push the
cartridge locking cover until it clicks into place.
10. E30: The document is too small when the Fit to Page Copying is selected.
SOLUTION --> Check the position and direction of the documents on the platen glass.
11. E31: The printer is not connected with the computer. Connect the USB cable of the
printer to computer USB port.
12. E50: Scanning the Print Head alignment sheet has failed.
SOLUTION --> To remove the error, press STOP/RESET. Make sure that loaded paper
(A4 or letter sized) is suitable for automatic print head alignment, in the correct position
and orientation in the platen glass and paper and platen glass are not dirty. Also make
sure that Print Head nozzles are not clogged.
When your printer Lamp flashes Green and Alarm Lamp flashes Orange
Alternately,
13. P02: Cancel printing and turn off your printer. Clear the paper jammed or material
that prevents the FINE cartridge holder from moving. Maybe the cartridge is faulty,
broken or damaged. Turn ON your printer.
14. P10: Turn off the printer and restart your printer. If the same error occurs, contact
your authorized service center.
15. Other Cases of Errors: Turn off the printer and unplug the power chord. Plug the
printer back and turn it ON, if the problem is not resolved contact your authorized
service center.
Source:
Canon Pixma MP287 On Screen Manual
thank link from : http://gb-sb.blogspot.com/2012/07/how-to-fix-troubleshoot-canonmp287.html
Artikel Terkait