Beruflich Dokumente
Kultur Dokumente
2012
MODULE
CODE
MWT 101
LEVEL
1 SEMESTER 1
CREDIT UNIT
2.0
CONTACT HOUR
MODULE TYPE
VOCATIONAL
PRE-REQUISITE
CORE REQUISITE
Last Edited
03 06 Dec 2012
Module Page
1/10
Document Page
December Edition
2012
MODULE OUTCOMES:
At the end of the course, the students should be able to:1.
2.
3.
4.
5.
6.
MODULE DESCRIPTION:
This unit identifies the competence required to equip students with a technical understanding of the definition of welding; history of welding,
master chart of welding and allied processes and identifying and setting up SMAW equipment and accessories. Competence also required for
setting up SMAW equipment and accessories by selecting, assembling and checking assembled set so that the components/parts is securely
connected, safe and ready for operation to perform padding and buttering and weld carbon steel plates in 2F position.
03 06 Dec 2012
Module Page
2/10
Document Page
December Edition
COURSE
WELDING TECHNOLOGY
MODULE
CODE
MWT 101
LEARNING STANDARD
CONTENT STANDARD
1. DESCRIBE HISTORY
OF WELDING
PERFORMANCE CRITERIA
1.1
1.1.1
1.1.2
1.1.3
1.2
1.2.1
1.2.2
Last Edited
03 06 Dec 2012
Module Page
3/10
2012
Document Page
December Edition
2012
COURSE
WELDING TECHNOLOGY
MODULE
CODE
MWT 101
LEARNING STANDARD
CONTENT STANDARD
2. DESCRIBE BASIC OF
WELDING
TECHNOLOGY
PERFORMANCE CRITERIA
2.1
2.1.1
2.2
2.2.1
2.2.2
2.3
Last Edited
03 06 Dec 2012
Module Page
4/10
2.3.1
2.3.2
Document Page
December Edition
2012
COURSE
WELDING TECHNOLOGY
MODULE
CODE
MWT 101
CONTENT STANDARD
3. IDENTIFY SMAW
EQUIPMENT
Last Edited
03 06 Dec 2012
Module Page
5/10
LEARNING STANDARD
PERFORMANCE CRITERIA
December Edition
2012
COURSE
WELDING TECHNOLOGY
MODULE
CODE
MWT 101
CONTENT STANDARD
4. SET UP SMAW
EQUIPMENT AND
ACCESSORIES
LEARNING STANDARD
PERFORMANCE CRITERIA
Last Edited
03 06 Dec 2012
Module Page
6/10
December Edition
2012
Operational Procedure.
COURSE
WELDING TECHNOLOGY
MODULE
CODE
MWT 101
CONTENT STANDARD
5. CARRY OUT
PADDING /
BUTTERING
LEARNING STANDARD
PERFORMANCE CRITERIA
5.1.1 Identify type of material and properties required for welding work.
5.2.1
5.2.2
5.2.3
5.2.4
5.2.5
03 06 Dec 2012
Module Page
7/10
Document Page
December Edition
2012
5.5.1
Last Edited
03 06 Dec 2012
Module Page
8/10
Document Page
December Edition
2012
COURSE
WELDING TECHNOLOGY
MODULE
CODE
MWT 101
CONTENT STANDARD
LEARNING STANDARD
PERFORMANCE CRITERIA
6. WELD CARBON
STEEL PLATE OF
THICKNESS RANGE
6-9 MM. IN 2F
POSITION
1.1.1 Identify type of carbon steel and basic properties required for
specific welding process.
Last Edited
03 06 Dec 2012
Module Page
9/10
Document Page
December Edition
2012
Last Edited
03 06 Dec 2012
Module Page
10/10
6.5.1 Select and use jigs and fixtures for welding process.
6.5.2 Apply correct technique to align weld metal.
6.5.3 Tacks weld plate according to BS/AWS welding procedure.
Document Page
10
December Edition
Last Edited
03 06 Dec 2012
Module Page
11/10
Document Page
2012
11