Beruflich Dokumente
Kultur Dokumente
V8i (SELECTseries1)
TRN011660-1/0002
AccuDraw, Bentley, the B Bentley logo, MDL, MicroStation and SmartLine are
registered trademarks; PopSet and Raster Manager are trademarks; Bentley SELECT is a
service mark of Bentley Systems, Incorporated or Bentley Software, Inc.
AutoCAD is a registered trademark of Autodesk, Inc.
All other brands and product names are the trademarks of their respective owners.
Patents
United States Patent Nos. 5,8.15,415 and 5,784,068 and 6,199,125.
Copyrights
2000-2010 Bentley Systems, Incorporated.
MicroStation 1998 Bentley Systems, Incorporated.
All rights reserved.
Trademarks
ii
Feb-10
Table of Contents
Bentley Instrumentation & Wiring Design
Feb-10
Table of Contents
Feb-10
Table of Contents
Feb-10
Table of Contents
Feb-10
Table of Contents
Feb-10
Table of Contents
Feb-10
Table of Contents
Feb-10
Table of Contents
Module Objectives_____________________________________391
Bulk Datasheet Builder _________________________________392
Module Review _______________________________________396
Questions ________________________________________396
Answers __________________________________________396
Feb-10
Course Description
Course Overview
Modular Format
This instructor-led course is designed in a modular format. Although each module
can stand alone, for your convenience they have been bound into one book to
include:
Feb-10
1
Copyright 2010 Bentley Systems, Incorporated
Course Overview
Course Description
Datasheets Fundamentals
Using Datasheets the student learns to access and manage dynamically-passed
process and instrumentation data, create and print a datasheet, as well as modify
a linked datasheet field.
Hookups Fundamentals
Using Hookups and Microsoft Excel as the native data storage format, the student
learns how to create, print and revise a hookup drawing, as well as modify a
linked hookup field. Students create a Bill of Materials from a selected set of
drawings for the relevant hookup type.
Datasets
This course has been created by combining modules into a typical Learning Path.
This modular design enables a student to complete a course at their own pace
from the On Demand eLearning environment or combined from specific modules
into an open enrollment course.
The image below shows the progress through each module. Datasets are
cumulative. This means that where ever a dataset is installed, that module
becomes a new Point of Entry on the learning path. All prerequisite data has
been included in each dataset.
As a student in the Open Enrollment course you will only need to install one
dataset at the start of your course.
Course Overview
Feb-10
Target Audience
Target Audience
Prerequisites
Course Objectives
After completing this course, you will be able to:
Modules Included
The following modules are included in this course:
Feb-10
Datasheet Fundamentals
Hookups Fundamentals
Course Overview
Modules Included
Course Overview
Feb-10
V8i (SELECTseries 1)
TRN011020-1/0003
AccuDraw, Bentley, the B Bentley logo, MDL, MicroStation and SmartLine are
registered trademarks; PopSet and Raster Manager are trademarks; Bentley SELECT is a
service mark of Bentley Systems, Incorporated or Bentley Software, Inc.
AutoCAD is a registered trademark of Autodesk, Inc.
All ther brands and product names are the trademarks of their respective owners.
Patents
United States Patent Nos. 5,8.15,415 and 5,784,068 and 6,199,125.
Copyrights
2000-2009 Bentley Systems, Incorporated.
MicroStation 1998 Bentley Systems, Incorporated.
All rights reserved.
Trademarks
Feb-10
Course Overview
Course Description
This course is designed to give the new user an overview of the methods used to
create the project environment. Using the Project Administrator utility
application delivered with the AutoPLANT install, you will learn how to create a
project root directory, and set up a simulated training project.
Target Audience
This course is recommended for the following audience(s):
This course is designed for the new user of Bentley AutoPLANT software. It is
designed for the project managers who will create and manage the project
environment.
Prerequisites
There are no prerequisites for this course. This is an overview to the more
advanced administrator courses.
Course Objectives
After completing this course, you will be able to:
Feb-10
The primary objective for this course is to give the user a basic understanding
of how a project is created. The student will learn the importance of
managing the models and documents created by the AutoPLANT 2D and 3D
applications.
7
Copyright 2009 Bentley Systems, Incorporated
Course Overview
Modules Included
Modules Included
Project Setup
Systems Requirements
You must have a CD drive or internet access for product installation. The
following prerequisites are required to run the modules included in AutoPLANT
Plant Design V8i (SELECTseries1) or AutoPLANT P&ID Design V8i (SELECTseries1).
Processor:
Operating System:
Internet:
Memory:
2GB or greater
Hard Disk
Input Device:
Output Device:
Databases Supported:
Course Overview
AutoCAD:
AutoCAD
Mechanical
Desktop:
Architectural
Desktop:
Feb-10
Building
Systems:
AutoCAD
Mechanical:
Note: The latest applicable service packs must be used for all of the above products.
Databases Supported
Microsoft
Access:
SQLServer:
Oracle:
Feb-10
Course Overview
Databases Supported
Course Overview
10
Feb-10
Overview
A Project Manager's primary focus is on creating finished project deliverables.
Daily tasks involve making sure issues relative to modeling techniques, piping
specifications and implementation of company standards are all on track.
Project Setup
This course will give you a basic understanding of how a project is created and
why it is important to manage the drawing files and data repository.
To support this effort, Bentley designed the Plant Process & Instrumentation and
3D Plant Design applications to allow the project teams to work within a
concurrent engineering environment for all aspects of functional, schematic, and
physical plant design.
By using a central database as a project repository, the applications for both 2D
and 3D can easily share the same data. Data can be edited on a project-wide
basis, drastically reducing the time it takes to bring a data-intensive project to
completion. Managers also appreciate the wealth of reports that can be
generated from a centralized system.
Prerequisites
Students should have a minimum of six months experience with AutoCAD
functionality and some familiarity with AutoPLANT commands and concepts.
Feb-10
11
Copyright 2009 Bentley Systems, Incorporated
Project Setup
Objectives
Objectives
Use the Project Administrator utility program to create a new project root
directory.
Introductory Knowledge
Before you begin this module, let's define what you already know.
AutoPLANT applications provide additional productivity functions to your native
AutoCAD application. Although it is not the intention of this course to teach
basic AutoCAD, these review questions will help you assess your current
knowledge prior to beginning the AutoPLANT course.
Identify the following statements as either True or False. The answers to each
question are provided in detail.
Questions
1
Answers
Project Setup
True: All units function in the same way in both AutoPLANT and
AutoCAD. Units are set for both length and angle during the project
setup phase.
12
Feb-10
AutoPLANT includes a set of integrated design and modeling tools. Some of these
applications, such as AutoPLANT P&ID, Piping and Equipment require AutoCAD
to function. The database applications utilize Microsoft Access and Microsoft
Excel. All of these tools provide fast layout and design of intelligent components.
This intelligent design philosophy enables the user to input component data once
and let the information cascade throughout the life of the project. Data is stored
within a centralized database which is easily accessed by all members of the
project team.
Many applications support the common scenario of sending documents to offsite design offices and vendors and then re-synchronizing the off-site design data
with the central project database.
To facilitate data sharing, a project must first be created. This function is usually
performed by the Project Administrator, using a set of tools installed with the
AutoPLANT applications.
These projects will contain custom configurations for all drawing and model
defaults and settings.
Once a project environment is defined, all models and drawings associated with
the project are managed and stored in the appropriate locations. Sharing of
design data is tightly regulated, preserving the database integrity.
Feb-10
13
Project Setup
Project Administrator
Project Administrator
During the AutoPLANT installation, various core and utility applications, common
to both the 2D and 3D programs are installed under the AutoPLANT group icon.
The Project Administrator utility enables you to create and manage custom
projects. From the interface you can edit the database configurations and control
system administration functions such as security access to critical data.
Open the utility from Start > Programs > Bentley > Plant V8i > Project Tools >
Project Administrator.
The navigation tree on the left is where you access specific project properties.
The C:\Bentley Plant V8i Projects directory is a top level directory and referred to
as a Project Root directory.
The directory level below the root directory contains sample projects that are
delivered with the install.
Project Setup
SAMPLE_IMPERIAL
SAMPLE_METRIC
SAMPLE MMETRIC
14
Feb-10
User Configurations
User Configurations
AutoPLANT is designed to support multiple projects. This design enables you to
define the units, specs, drawing database format, borders, drawing templates,
module and component options, in a specific configuration.
To support this implementation, sample configuration files were created to serve
as placeholders for the definition of configuration defaults and settings. By using
the samples you can remove the tedious effort that would be required to
manually edit these configuration files when creating a custom configuration.
These sample project files are not recommended for production use, but are used
as templates for building your own projects.
You can see an example of the file structure beneath the User Configuration
directory. You will use the User Configuration Sample Imperial to create a new
project.
Feb-10
15
Project Setup
A Project Root directory can be at any level of your computer's file structure. The
path to that folder is referred to as %PROJECT_ROOT% throughout the
AutoPLANT course documentation.
Project Root directories usually reside in a different file path than your
AutoPLANT installation, so the path to the installation is shown as
%NETWORK_ROOT% throughout the AutoPLANT course documentation.
Note: Although not visible in the Bentley Project Administrator dialog, the system has
created a file called at_proj.dbf that resides in this project root directory. This
file contains a record for every project that is created under this specific root
directory.
The following exercises will give you exposure to Project Administrator
functionality. You will create a directory structure in preparation for the 2D and
3D Fundamental courses.
Once directories have been set up, they are ready for the installation of a predefined project dataset.
There are no rules as to how many Project Root directories an organization uses
or how many projects are contained within the project root.
Select Start > Programs > Bentley > Plant V8i > Project Tools > Project
Administrator.
Project Setup
16
Feb-10
Click OK.
The software returns to the Project Administrator interface with the new
Project Root directory called Bentley Training Project listed in the
navigation tree.
Now that the Root Directory has been defined, you will create the project.
Feb-10
17
Project Setup
Creating a Project
Creating a Project
When a new project is created, the user needs to specify the basic criteria. The
following information provides an overview of the type of information you will
input.
Provider Type
This is the database program that will be used for storing the project data.
AutoPLANT can write to Microsoft Access, MSDE, SQL Server, and Oracle.
(Only those installed on the computer will be available for selection.)
courses.
The 3D Modeling Project Settings that you select will indicate which configuration
data files will be copied over to create the new project files.
The Units field defines the drawing and model defaults including units, specs,
drawing database format, borders, drawing templates, modules and component
options. These configurations were installed in your directory.
The Use Central Project Mode check box is only available when you select SQL
Server or Oracle database provider types.
Project Setup
18
Feb-10
Creating a Project
Project Paths
Details
Of the details that can be defined in this dialog, the Project Name is the only
attribute that is required.
Optional details include: Project Number, Project Description, Client Name, Client
Number, and Client Location.
Right-click and select New Project, or select File > New Project from the
menu.
Feb-10
Select Access
Click Next.
Select Standard Base Project in the Select the Base Schematic Template
list.
19
Project Setup
Creating a Project
Note: This course will use the Imperial Units. The table below shows the
Project Setup
Attribute
Imperial
Metric
Mixed Metric
Project
Template
Standard Base
Project
Standard Base
Project
Units
Imperial
Metric
Mixed Metric
Click Next.
20
Feb-10
Creating a Project
Note: Project Name is required while all of the other fields are optional. The
Imperial
Metric
Mixed Metric
Project Name
Training
Training
Training
Project
Description
Imperial Training
Project
Metric Training
Project
AutoPLANT copies the default project settings into your new project.
When the process is complete, the new project will appear under the
Bentley Training Project directory.
12 Click + to expand your new project.
You will notice directories for all project related data including specific
directories for all drawings and data that will be created using both the 2D
and 3D applications.
Feb-10
21
Project Setup
Creating a Project
You have now completed this short course in preparation for using the 2D or 3D
applications.
Project Setup
22
Feb-10
Module Review
Module Review
Now that you have completed this module, lets measure what you have learned.
Questions
1
What is the only required field in the Details dialog when creating a new
project?
True/False: The Project Description field has to maintain the same name
as the Project Name?
What are the two types of base templates for project creation provided by
AutoPLANT?
Answers
Feb-10
The %Project_Root% is the variable that contains the path to your project
root directory. The %NETWORK_ROOT% is the path of the installation.
The only required field in the Details dialog is the Project Name, all others
are optional.
True: The Project Description field is populated with the Project Name.
False: The Project Description does not have to be the same as the Project
Name; it is preferable that it contain more description information about
the project.
The Standard Base project template and the KKS project template.
23
Project Setup
Module Review
Project Setup
24
Feb-10
Course Summary
Now you will be able to:
Course Summary
Feb-10
27
Copyright 2009 Bentley Systems, Incorporated
Course Summary
Course Review
Course Review
Questions
1 Which two project templates does AutoPLANT provide?
2 AutoPLANT can write to several database providers, name them.
3 What type of data repository will allow for sharing of data between 2D
and 3D applications?
Now that you have completed this course, lets measure what you have learned.
Course Summary
28
Feb-10
Course Review
Answers
1 AutoPLANT provides two project templates: Standard Base Project and
KKS.
Class Date: 18-Jul-2011
Feb-10
29
Course Summary
Course Review
Course Summary
30
Feb-10
V8i (SELECTseries1)
TRN010330-1/0002
AccuDraw, Bentley, the B Bentley logo, MDL, MicroStation and SmartLine are
registered trademarks; PopSet and Raster Manager are trademarks; Bentley SELECT is a
service mark of Bentley Systems, Incorporated or Bentley Software, Inc.
AutoCAD is a registered trademark of Autodesk, Inc.
All other brands and product names are the trademarks of their respective owners.
Patents
United States Patent Nos. 5,8.15,415 and 5,784,068 and 6,199,125.
Copyrights
2000-2010 Bentley Systems, Incorporated.
MicroStation 1998 Bentley Systems, Incorporated.
All rights reserved.
Trademarks
32
Feb-10
Course Overview
Description
The Bentley software suites communicate with each other by using a set of
relational databases. When projects are created an empty set of databases are
generated. Data from the software applications are then collected and shared
among the applications. Instrumentation tags can be created within the
Instrumentation software or within Data Manager or even within a P&ID.
Target Audience
This course is designed for novice instrumentation designers and drafters. The
course could also be used as a refresher course for more advanced users who
have not used the software for a time.
Prerequisites
Objectives
This course is intended for new and existing users. Our goal is to train students to
begin using the Bentley Instrumentation & Wiring application as a tool to increase
their productivity when creating instrumentation documents. A user experienced
with previous versions of Bentley software will learn the concepts introduced
with the new product as quickly as possible.
Feb-10
33
Copyright 2010 Bentley Systems, Incorporated
Course Overview
Modules Included
Getting Started
Data Manipulation
Instrumentation Drawings
System Requirements
You must have a CD drive or Internet access for product installation. The
following prerequisites are required to run the modules included in
Instrumentation & Wiring V8i Edition:
Modules Included
Course Overview
Processor:
Operating
System:
Internet:
Memory:
Hard Disk:
Input Device:
Output Device:
34
Feb-10
System Requirements
Video Graphics
Card:
Document
Management:
Cad Engines:
Microsoft Office:
Databases
Supported:
Feb-10
ORACLE 81, 9i
35
Course Overview
Click OK.
Right-click on the project to upgrade in the project root tree and select
Upgrade > From Integrity Check Results.
Project Administrator V8i (SELECTseries1) now upgrades the selected
project.
Course Overview
36
Feb-10
Introductory Knowledge
Introductory Knowledge
Questions
1
Answers
1
False, Instruments shown on a P&ID are graphical images with data linked
to project databases that are shared between the AutoPLANT software
suites.
Before you begin this module, lets define what you already know.
Note: For Training purposes, the provided project was created using the Access
database format, however; Instrumentation and Wiring does not support the
Access database format for multi-user projects. Bentley recommends that no
less than the MSDE database format be used. SQL and Oracle databases
provide the most stable environments for building projects to be used by
multi-users.
Feb-10
Press Unzip.
37
Course Overview
Press Close.
From your Windows Start menu, select Programs > Bentley > Plant V8i >
Project Tools > Project Administrator.
From the File menu, press Add Root to display the Browse for Folder
dialog.
Note: In order for this option to be available in the File menu, you must select
something at the primary root level of the navigation tree because you
cannot create a project root directory under a project directory.
8
Note: The project root folder, C:\ Bentley Training Project now appears in the
Course Overview
38
Feb-10
Users now have the option to generate Foundation Fieldbus segment drawings
that show the complete segment (including multiplexers), or to split the segment
into separate drawings. The connections to the brick (or Megablock) can be
displayed on one drawing sheet and the connections to the multiplexers on
separate drawing sheets. This prevents complex segment drawings - that
incorporate multiplexers - from becoming too cluttered.
Feb-10
39
Course Overview
Performance Improvements
Course Overview
40
Feb-10
Module Overview
In this module, you learn how to launch the Bentley Instrumentation &Wiring
main interface and the Layout Designer module. You will be introduced to some
of the basic features of each interface.
Module Prerequisites
Module Objectives
After completing this module, you will be able to:
Getting Started
Feb-10
41
Copyright 2010 Bentley Systems, Incorporated
Getting Started
Note: If you previously logged into another Bentley application and set the
Save Password check box, the Login dialog will not display. You can
access this dialog by selecting File > Log on as a Different User.
Instrumentation & Wiring defaults to logging in with supervisor privileges
by populating the User Name field with Supervisor.
3
Click OK.
Getting Started
42
Feb-10
After initial startup, the Instrumentation & Wiring toolbars display docked in the
upper portion of the screen. These toolbars provide the fastest access to
application commands. To view the name of the command that will be executed
by any toolbar button, simply position the cursor over an item and pause. A tool
tip will display describing that item.
The File Menu command enable opening an existing project; editing and
management of descriptive, database, directory, and path information associated
with the current project; importing and exporting table data; associating project
standards with loops; assigning revision marks to project tag numbers; and
printing project documents.
File Menu:
Description:
Open Project
Feb-10
Import
Export
43
Getting Started
Description:
Batch Revisions
Batch Print
File Menu:
Exit
Edit Menu
The Edit menu allows short cut methods to traditionally time consuming
keyboard actions.
Edit Menu:
Description:
Select All
Cut
Copy
Paste
Clear
Getting Started
44
Feb-10
Project Toolbar
The following provides a quick reference to the icon available in the Project
toolbar.
Toolbar Icon:
Description:
Open Project
The View Menu and Toolbar provide commands to toggle the Project Window,
Documents Window, and Properties Window; refresh the current view, and to
customize the display of the current view. One-step menu commands are also
provided to display the current project instrument list, instrumentation cables,
motor list, and electrical cables.
Feb-10
45
Getting Started
The following provides a quick reference to the icons available in the View
toolbar.
Toolbar Icon:
Getting Started
Description:
Instrument List
Instrument Cables
Motor List
Electrical Cables
Refresh
Project Window
46
Feb-10
Toolbar Icon:
Description:
Documents Window
Properties Window
The Tools Menu provides commands to quickly create, edit and delete tag
numbers; search/replace a tag or text string, and to filter and sort the data in the
current view. Database utilities and tools to set the default view and report are
also provided within the Tools Menu.
The following provides a quick reference to the icons available in the Tools
toolbar.
Toolbar Icon:
Feb-10
Description:
New Tag
Edit Tag
47
Getting Started
Toolbar Icon:
Getting Started
Description:
Delete Tag
Find
Filter
Sort
Replace
Associate
Database Tools
Connection/Allocation
Restrictions
Options
48
Feb-10
The following provides a quick reference to the icons available in the Applications
toolbar.
Toolbar Icon:
Description:
Layout Designer
Hookup Editor
Feb-10
Cable Routing
49
Getting Started
Toolbar Icon:
Description:
Tray Routes
Symbol Editor
IWD Editor
The View Pane is found along the right side of the main Instrumentation & Wiring
interface. This area displays the data contained within defined views and reports.
Column order can be arranged to user preferences by using drag and drop
functions on the column headers. Columns can be resized by dragging the
individual column borders to a suitable length. The individual views within the
View Pane can be resized by using the Maximize and Restore Up/Down buttons,
or by scaling the view using standard Windows operations.
Getting Started
50
Feb-10
Note: The controls within the Project Window will change in accordance with the
node selected.
The following provides a quick reference to the nodes available in the Project
Window.
Feb-10
Node:
Description:
Views
System Queries
Reports
Instrument Templates
Electrical Templates
51
Getting Started
Node:
Description:
Macros
Tables
Hint: You can also preview reports by clicking Preview Report within the
Getting Started
52
Feb-10
Select Preview.
Note: When the report opens, it must open the database; therefore, a
View will automatically zoom in, or use the scroll bar to navigate through
the report.
Feb-10
53
Getting Started
Layout Designer
Layout Designer
In this section you will become familiar with the Layout Designer module of
Instrumentation & Wiring. The Layout Designer enables you to define loop
components, connect loop components, and generate documents pertaining to
specific loops. Components on a layout have right-click context menus to reduce
the amount of time needed to perform detailed connections, tag modifications,
or component definition.
Click No.
To display new layout wizard.
Click Finish.
Getting Started
54
Feb-10
Layout Designer
Note: Layouts can be named anything, but it is recommended that the name
describe the contents of the layout. For example, Analog loops 10-JBA100 would include all analog loops for the junction box 10-JBA-100. Any
component can be placed on any number of layouts. For instance, 10JBA-100 can be added to multiple layouts if needed to allow all field
devices to be terminated.
Feb-10
55
Getting Started
Layout Designer
The toolbars shown below provide the fastest access to application commands.
To view the name of the command that will be executed by any toolbar button,
simply position the cursor over an item and pause. A tool tip will display
describing that item.
The following provides a quick reference to the icons available in the Layout
Designer toolbar.
Getting Started
Component Bar
Documents Window
56
Feb-10
Layout Designer
Feb-10
Refresh Layout
Preview
Edit
57
Getting Started
Layout Designer
Getting Started
Connect
Disconnect
Connect I/O
Cut
Copy
Paste
Assembly Options
Zoom In
Zoom Out
Align Left
Align Right
58
Feb-10
Layout Designer
Align Top
Align Bottom
Actions Toolbar
The Actions toolbar located within the individual tabs of the Component Bar
provide controls specific to the active tab. The controls within these tabs will
change in accordance with the active tab.
Feb-10
59
Getting Started
Layout Designer
Instrumentation Tab
Select the Instrumentation tab on the Component Bar. The Instrumentation Tab
displays all components for defining instrumentation loops.
Icon:
Getting Started
Description:
Instrument Loops
Instruments
Field Panels
Card Panels
60
Feb-10
Layout Designer
Electrical Tab
Select the Electrical tab on the Component Bar. The Electrical Tab displays all
components for defining electrical loops.
The following provides a quick reference to the icons available in the Electrical
Tab toolbar.
Icon:
Feb-10
Description:
Equipment
Motors
Electrical Cables
Electrical Panels
Card Panel
61
Getting Started
Layout Designer
Fieldbus Tab
Select the Fieldbus tab on the Component Bar. The Fieldbus Tab displays all
components for defining fieldbus loops.
The following provides a quick reference to the icons available in the Fieldbus Tab
toolbar.
Icon:
Getting Started
Description:
Fieldbus Segments
Fieldbus Instruments
Fieldbus Spurs/Cables
Fieldbus Panels
Card Panels
62
Feb-10
Layout Designer
The View Pane is located on the right side of Layout Designer. The View Pane
displays a graphical representation of individual components and their
connectivity.
Feb-10
63
Getting Started
Module Review
Module Review
Questions:
1
Answers:
1
No, the Datasheet application must be launched from the main Instrumentation
& Wiring interface.
Now that you have completed this module, lets review what you have learned.
Getting Started
64
Feb-10
Module Overview
In this module you will build an instrument, create a new terminal strip and cable
for the instrument. You will make a standard for this loop and then build a second
instrument from the standard.
Module Prerequisites
Module Objectives
Feb-10
65
Copyright 2010 Bentley Systems, Incorporated
66
Feb-10
Note: The New Instrument Loop dialog presents four options three for
creating a new instrument loop and one for creating a new instrument
tag.
Feb-10
67
Note: The tag types and tag codes that were discussed earlier are an integral
Note: The Overwrite Instr Service with Loop Service check box aids in
Note: Make sure that the Also Create Instrument Tstrip and Also Create
Instrument Cable are checked. If you fail to check these you will have to
create them manually. Additionally if you allow them to be created
automatically, then they will be terminated automatically to the
instruments.
68
Feb-10
Click OK.
10 Click Finish.
Feb-10
69
The New Loop dialog shows that a loop, instrument, terminal strip, cable, and
document have been created (as shown in the All tab). Although these
components have a tag number allocated in the database, the details for each
have not been defined.
The All tab displays the contents of the loop, including the tag types for each
component. The Loop, Instr, Tstrip, Cable, and Doc tabs display only
components of that tag type. The properties for the selected components are
listed in the window along the right-hand side of the dialog.
Notice the Auto Rename check boxes in the left-hand pane. If this loop is
saved as a standard and used as a template in creating future loops, the
components of the new loop will automatically inherit new tag numbers for
the components that have the Auto Rename check box set. Additionally, if
you change the name of the current loop within this dialog, then all
components of the loop will be automatically renamed.
Hint: To place a check in the Auto Rename check box, you must select the item
in the list and then click Setup. From the Tag Attributes dialog you and
change the value for the check box.
Within the Standards group box there are two buttons, Build From and Save
As. The Build From button is used to select a standard from which the current
loop will be defined. The Save As button will save the current loop
configuration as a standard to be used again.
Within the Tags group box there are five buttons, New, Edit, Delete, Remove
and Setup. The New button will create a new tag within the loop, the Edit
button will allow you to edit the tag, the Delete button will delete the
selected tag, the Remove button will remove the tag from the loop without
removing the data associated with the tag, and the Setup button will allow
you to change the properties of the tag as shown below.
The Design button will allow a user to design the terminal strip or the cable
for the loop and finally the Property View Options dialog will allow user to
70
Feb-10
change the fields listed in the properties window as shown below. Click
Cancel to close the dialog.
The following dialog displays, prompting you to update the Tstrip and
Cable tag numbers with the modified tag number.
Feb-10
71
16 Click Yes.
Note: The Loop tab and Doc tab will continue to show the original tag number.
72
Feb-10
Select 200-FT-300.
Click Design.
Click Add.
The Add Terminal Set dialog enables you to add new connection rows to the
current Tstrip. The Terminal window allows you to define the number of
individual terminals to be included in the new terminal set. The Repeat
window allows you to type the number of repeated connection rows to be
inserted into the current Tstrip in this field, or use the spinner button to select
the appropriate value.
Note: A row refers to an individual terminal and a row set refers to a group of
rows that are wired for one function. A powered instrument for
example would have a row set of 3 rows for the powered cable and a
row set of 3 rows for the instrument cable. The row set definitions are
critical for building a loop in the Detail Connection Window and autogenerated loops.
To select from a list of pre-defined standard row sets, click Build From to
display the Build From Standard Terminal Set dialog. To save the current row
Feb-10
73
set details as a standard which can be used as a template in building new row
sets, click Save As to display the Save as Standard Terminal Set dialog. To copy
the current row set terminal, click Copy. To clone the current row set
terminals, click Clone. To remove a row set from the current Tstrip, place your
cursor within the appropriate row, then click Delete. After you are finished
defining the details of the new connection set, click OK to add the new
terminals to the current Tstrip, or click Cancel to abort the new terminal set
insertion process. The Links toolbar enables you to place graphical
representations (no associated database information) of links, fuses, and
linked terminals.
5
Hint: You can use the spinner button to raise the value to 3.
6
10 Click OK.
74
Feb-10
Note: The + and have been added to the Term column. Also, notice the tie
back symbol in row 3, column 3. This link indicates that the SCR has
been tied back.
11 Click OK.
12 Click OK.
Feb-10
75
Click Design.
The New Cable dialog displays connection details of the cable, and provides tools
for modifying connection numbering. To display the details of a cable, select the
manufacturer of the cable from the Cable Manufacturer list, then select the cable
type from the Cable Type list. To create a new core set, click Add to display the
Add Core Set dialog. To edit the details of a core set, click Edit to display the Edit
Core Set dialog. To insert a new core set, place your cursor where you want to
insert the new core set, then click Insert to display the Insert Core Set dialog. To
remove cable cores or a core set from the current cable, click Delete to display
the Delete Core(s) dialog. To save the current cable details as a project standard,
click Save As Standard to display the Save Cable Type As dialog.
4
Since no cable cores have been defined, click Add from the Core Set group
box.
The Add Core Set dialog enables you to add new cable cores to the current cable.
Use the Core spinner button to indicate the number of individual cores to be
included in the new Core Set. In the Repeat window type the number of repeated
cores to be inserted into the current cable in this field, or use the spinner button
to select the appropriate value. To copy the current core set terminal, click Copy.
To remove a core set from the current cable, place your cursor within the
76
Feb-10
appropriate row, then click Delete. After you are finished defining the details of
the new core set, click OK to add the new cores to the current cable, or click
Cancel to abort the new core set insertion process.
5
10 Click OK.
11 To return to the New Cable dialog.
12 Click OK.
13 To return to the New Loop dialog.
Note: In order for I&W to pull information from the database for a component
Feb-10
77
Click OK.
To display the New INSTR dialog.
Click OK.
Click New.
To create another new tag.
Select AT_CVALVE from the Setup New Instrument Tag Types dialog.
78
Feb-10
26 Using the Instrument Position buttons, rearrange the instruments into the
200-FY-300.
Select 200-FE-300.
Notice that the only value available from the list is <Unspecified>.
Note: You have two choices at this point, you can type the information
manually, or you can create a new record in the INS_TYPE table. In this
exercise, you will create a new record.
Feb-10
79
Click Copy.
Click OK.
80
Feb-10
Take some time to browse through the various tabs and note the information
that has been added. When you are finished, click OK to save the new loop
details and return to the main Instrumentation & Wiring interface.
Class Date: 18-Jul-2011
Hint: Should you need to delete any cables and re-create them, or create a
new cable from scratch, ensure that the cable has a source (as indicated
within the Properties window). If a cable is created without a source, it
will not be saved with the loop.
Feb-10
81
To save the loop you created in the previous exercise as a template (project
standard) for building future loops.
Select any of the components from the Instrument List displayed in the
View Pane.
Repeat the previous step with the components in the Tstrip, Cable and
Doc tabs.
82
Feb-10
Note: Bentley Instrumentation & Wiring assists you in naming the loop
Click OK.
To return to the Edit Loop dialog.
10 Click OK.
Feb-10
83
Select Tools > New Tag to display the New Instrument Loop Step 1
dialog.
Set the From Standards radio button, and then click Next >.
Note: This dialog displays the standards that have been saved in the current
project. You have the option of using the Select From button to select
From Bentley standards, or standards built in another project. The View
Details button displays a preview of the wiring details (i.e., number of
row sets, terminal designations, cores, etc.) for the loop selected.
3
Click OK.
To display the New Instrument Loop Step 3 dialog.
84
Feb-10
Click Finish.
The New Loop dialog displays all of the tags converted from F (Flow) to P
(Pressure). The Built From field displays the standard from which the new
loop was built.
Click OK.
Description fields.
14 Select 200-PY-300 from the Instr tab list.
Feb-10
85
Description fields.
fields.
18 Clicking New within the Tags group box.
31 Click Cancel.
32 Select the Cable tab.
86
Feb-10
33 Select 200-PT-300.
34 Click Design.
Feb-10
87
Note: Selecting any instrument from the list that has not been assigned to a
loop number will list all instruments without loop number in the
Allocate Missing Loops dialog. This enables you to create loop numbers
for these instruments automatically by clicking Generate Loop
Numbers.
3
88
Feb-10
Hint: If the instrument should belong to a different loop number other than
the one automatically created, then you can manually enter the loop
number for this instrument. The loop number can be either one that
does not exist or does exist in I&W. As an example, if you had a hand
switch for this loop named 200-HS-312 then this could belong to loop
200-F-312. If the loop number were automatically created for this hand
switch, then it would be created as 200-H-312.
Note that a loop number has now populated the LOOP_NO field.
Click OK.
Feb-10
Highlight 100-TT-100.
89
10 Click OK.
The following dialog opens showing all loop standards that are supplied by
Bentley instrumentation & Wiring.
11 Select TE,TT,TY,TV.
12 Click OK.
13 Click OK.
90
Feb-10
Note that a terminal strip and cable have been added to the loop. Browse
the Tstrip and Cable tabs and notice that the new components have been
named appropriately.
17 Click OK.
Feb-10
91
Module Review
Module Review
Now that you have completed this module, lets review what you have learned.
Questions:
1
To build a loop from a standard, what is the option to select on the first
New Loop Wizard dialog?
What are the two options available when a Manufacturer or Model is not
found in the provided list?
What does the Repeat field do in the Add TSTRIP and Add CABLE set
dialogs?
Answers:
1
Set the From Standards radio button to create a loop from standards.
The Generate Loop Numbers button will create a new instrument loop for an
instrument tag that was created in a separate application.
One option is to type the information into the field manually, the second option
is to add the information to the INS_TYPE by copying an existing record and
updating as needed.
The repeat will create multiple sets of the TSTRIP and CABLE configurations and
automatically number them.
92
Feb-10
Module Prerequisites
Module Objectives
After completing this module, you will be able to:
Feb-10
93
Copyright 2010 Bentley Systems, Incorporated
Select Programs > Bentley > Plant V8i > Instrumentation from your
Windows Start menu to launch Instrumentation & Wiring if not already
open.
Click Finish.
94
Feb-10
10 Type Area 200 Analog Junction Box in the Field Panel Remarks field.
11 Click Next >.
To accept the defaults for Tag Types and Tag Codes and to display the
following dialog.
Feb-10
95
15 Click OK.
16 Click Finish.
The New Field Panel dialog is very similar to the New Loop dialog except for
the tabs. All of the buttons along the bottom of the dialog operate just as in
the New Loop dialog detailed in the previous module. The Dev tab is used in
the Field Panel and Card Panel dialogs for devices such as relays and intrinsic
barriers to be tagged and designed.
The New Field Panel dialog defaults to display the All tab, which shows that a
tag was created for the junction box, terminal strip, cable and document.
17 Select the Tstrip tab.
18 Select JB-300.
19 Click Edit in the Tags group box.
20 Type TS in the Typ field.
21 Type 1 in the Num field.
96
Feb-10
22 Click OK.
Click Design.
To display the Edit TSTRIP dialog.
Click Add.
Click OK.
Note: This dialog is the same dialog that is used when creating terminals for an
instrument.
10 Click OK.
Feb-10
97
Notice the terminals are now numbered by terminal sets and rows. Another
terminal must be created for the overall screen that contains multi-core
cables.
18 Click OK.
11 Scroll to the bottom of the terminal strip to locate TSet 12. Select TSet 12.
12 Click Add from the Terminal Set group box.
98
Feb-10
Note: Within the Cable tab, notice that the Source field (within the Cable
Click Design.
10 Click OK.
11 Scroll down and select Core Set 12.
12 Click Add from the Core Set group-box.
13 Set the Core field to 1.
14 Set the Repeat field to 1.
15 Type OAS in the Core field.
16 Click OK.
Feb-10
99
17 Click OK.
18 Click OK.
Click OK.
To return to the Edit Field Panel dialog.
Click OK.
To return to Layout Designer.
100
Feb-10
In this section you learn to create a new field panel from the project standard
that was built in the previous lesson.
Click OK.
To display the New Field Panel Step 3 dialog.
Feb-10
101
Click Finish.
Click Design.
10 To display the New Cable dialog. Notice how all of the cable core details
102
Feb-10
Feb-10
103
In this exercise, you create a new card panel for a DCS. Card panels contain
multiple components like landing terminal strips, power supplies, card racks, and
the cards themselves. The landing strip is a gathering point for all incoming multicore cables from the field. The landing strips are wired to the individual card
terminal strips located on the back of the card using a vendor supplied cable.
Therefore the individual cores must be terminated by I/O type. An example of a
card panel is shown below.
104
Feb-10
Type Area 200 DCS Panel in the Card Panel Remarks field.
Feb-10
105
A tag number for one I/O card within this panel must be defined.
11 Type DCS300 in the Panelnum field.
12 Select AI from the IO_type list.
13 Type 01 in the Rack field.
14 Type 01 in the Num field.
10 Click OK.
106
Feb-10
15 Click OK.
16 Click Finish.
No cable tag was created. This is because the wiring in this card panel will
be done internally using a vendor supplied cable.
Feb-10
107
Exercise 1: Create The Card Landing Terminal Strip And Card I/O Channels
1
Click OK.
10 Click OK.
108
Feb-10
22 Click OK.
Feb-10
109
Click OK.
10 Click OK.
The Edit I/O List dialog enables you to edit the current Card Panel I/O List.
To change the I/O type for a specific row set, place your cursor in the
appropriate row, then select the I/O type from the list located near the
top of the dialog. To change any of the values within the individual fields,
simply type over any of the information. To add a new I/O, click Add to
110
Feb-10
add the row to the bottom of the list. To remove a row set, place your
cursor within the row you want to remove, then click Delete.
Note: Users can create I/O cards with mixed I/O. For example, 4 AI channels
Class Date: 18-Jul-2011
and 4 AO channels. Previously all the channels had to be the same I/O
type.
13 Click Configure.
14 Click OK.
To exit the dialog and save your changes, or click Cancel to exit without
saving the changes.
15 Type 8 in the Spinner field.
16 Make sure the list is set to AI.
17 Click Add.
Panel dialog.
Click OK .
To display the New Card dialog.
Click OK.
Click Design.
Click Add.
To create the default channels and addresses.
Feb-10
111
10 Click OK.
11 Select the Tstrip tab.
13 Click Design.
To create the terminal strip and return to the Edit TSTRIP dialog.
20 Click OK.
To exit the Edit TSTRIP dialog and return to the New Card Panel dialog.
21 Select the Card tab.
22 Select DCS300/AI-01-01.
23 Select ALLENBRADLEY 1771-IE-4W(AI) 24Vdc 8ch Analog Input from the
24 Select DCS300/AO-02-01.
25 Select ALLEN BRADLEY 1771-IE-4W(AO) 24Vdc 8ch Analog Output from
112
Feb-10
Module Review
Module Review
Now that you have completed this module, lets review what you have learned.
Questions:
1
True or False: The landing terminal strip is used to wire the I/O cards
together?
If an I/O card is not available in the I/O card list of the properties window
can you add one?
Answers:
The link symbols indicate jumpers that would be made in a panel.
False, the landing strip is used to marshal the incoming signal wiring to the I/O
cards.
Feb-10
113
Module Review
114
Feb-10
Data Manipulation
Module Overview
In this module you will learn to manipulate the data by using the Sort, Filter, Find,
and Replace commands. These tools will help you to navigate through the views.
You will add data via the views, and then review the different nodes within the
Instrumentation & Wiring interface.
Module Prerequisites
Module Objectives
After completing this module, you will be able to:
Feb-10
115
Copyright 2010 Bentley Systems, Incorporated
Data Manipulation
Data Manipulation
Data Manipulation
Select Programs > Bentley > Plant V8i > Instrumentation from your Windows
Start menu to launch Instrumentation & Wiring if not already open.
Instrumentation & Wiring provides several views for looking at your data. These
views provide a snapshot of the data contained in the project database. In the
project provided, several loops, field panels and card panels have been created.
Terminal strips and cables were created for each component.
Lets take a moment to examine some of the views. Double-click on the Cable
Schedule Instrumentation view. This view shows all of the instrument cables that
have been created and provides the source (primary connection component). It
also provides the cable type and length of cable required for the cable tray runs.
A report generated from this view would be helpful to someone cataloging and
ordering instrument cable. Close this view and open the Connection by Cable
view. This view goes into more detail than the Cable Schedule view. It provides
the terminal strips that the cable is attached to, the terminal on the strip that it is
terminated on. A report built from this view would be helpful to a maintenance
crew for tracing wiring problems. The Core Connection view expands the data a
bit further by providing the cable tag information and the wire color. This view is
sorted by the ORD number, but could be easily sorted by terminal strip or
termination point by using the built in tools described below.
Data Manipulation
116
Feb-10
Data Manipulation
The tags in the Instrument List are now sorted in descending order based
on their tag number.
Right-click on 200-FT-300.
Select 200-PAL-300.
Right-click.
To display the context menu.
Feb-10
117
Data Manipulation
Data Manipulation
Notice that only tags matching the value within the selected I/O TYPE field
(DI) display.
Data Manipulation
118
Feb-10
Data Manipulation
The Find Tag dialog displays listing all the instrument tags in this project.
Click OK.
To locate that tag in the Instrument List. Notice that 200-PY-300 is now
selected in the Instrument List.
Feb-10
119
Data Manipulation
Data Manipulation
Notice that they have similar descriptions of Alarm High and Alarm Low.
Place your cursor in any of the DESCRIPTION fields except for 200-PAL300 or 200-PAH-300.
Right-click.
To display the context menu.
Select Replace.
Clear the Match Whole Field and Current Field Only check boxes.
Data Manipulation
120
Feb-10
Data Manipulation
The Tag Number field in the Property Sheet will turns to ** when multiple
instruments are selected as shown below.
Press Enter.
Notice that the Manufacturer fields for both instruments are updated.
Feb-10
121
Data Manipulation
Data Manipulation
There will be times when you will need to add and delete components. An
individual instrument can be added to an existing loop by editing the loop and
adding the component, but an individual tag can also be created outside of the
loop environment in the instrument list view. When deleting loops, the
associated terminal strips, cables and documents must also be considered.
Instrumentation & Wiring will give you the option to delete these components
when the loop is deleted.
Click OK.
Click Finish.
The new tag is created. Note the new instrument tag is not associated to
any loop.
Data Manipulation
122
Feb-10
Data Manipulation
Prior to starting this exercise, open the Cable Schedule Instrumentation view and
make note that there are two instrument cables for the loop 200-P-300.
1
Click Yes.
To delete the loop.
Click Yes.
To delete all of the associated instruments, cables and document
Note: All of the instruments associated with 200-P-300 were removed from
Feb-10
123
Data Manipulation
From within the Instrumentation & Wiring interface, you can build a loop for
instruments automatically. This utility is very helpful when importing loops from
an external source or when a different application, such as P&ID or Data
Manager, has added instrument tags to the database.
Click Assign.
Click Ok.
Note: The loop does not have to be edited; it has inherited the properties of
Data Manipulation
Click Cancel.
124
Feb-10
By default DeleteTagNumbers flag is set to Yes and allows users to delete the
component tag from the project. In this exercise you will set the flag to
DeleteTagNumbers = No. By setting it to No, when user tries to delete the tag
from the project the tag is not deleted but its status is set as DEL. All the links of
the tag are deleted but tag is not removed from the Project Database and is
available in the project for future use.
1
Select Start > Programs > Bentley > Plant V8i > Project Tools > Project
Administrator.
Select Properties.
Feb-10
125
Data Manipulation
Press Enter.
Data Manipulation
126
Feb-10
16 Click OK.
17 Click Finish.
18 Select 400-FT-002 from Instrument List view.
Class Date: 18-Jul-2011
21 Click Yes.
Observe the Status field for the tag is changed to DEL in the Instrument
List view.
status changed to DEL and all links removed from database. But they
remain in the ProjDB and can be reused.
Feb-10
127
Data Manipulation
System Queries
System Queries
The System Queries are views that were created to transfer data from the
database to the loop templates. They are not intended to be customized liberally.
The views should be carefully edited by the project administrator. Custom fields
that have been added to the database tables can be added to the query views so
that the data held in that field can be transferred to a template.
Note: Since no loops have been created in Layout Designer, the views will not contain
data.
Open the System Queries node and double-click on the DocTokensLoop view.
Scroll across the view and look at the fields provided. In the query shown above,
note the field names TSTRIP, L1, L2, LTN and TN. The TSTRIP field will contain the
name of the terminal strip. The L1, L2.fields will contain the link data which will
guide the software to place a graphic symbol on the template. The TN field will
contain the terminal number of the terminal strip. In this view there will be a
record for each terminal on a terminal strip, therefore these views can become
very large.
Data Manipulation
128
Feb-10
Reports
Reports
The Reports node contains a list of all of the reports provided by Bentley. These
reports use the views as their data source. The reports can be easily modified
using Microsoft Access Report Builder. Fields from the views can easily be added
or deleted from the reports to access the data that is required by your company.
Expand the Reports node and double-click on the Instrument List report. In the
report shown above, note the TAG Number and Description are shown for the
instruments within the project. This report was set up to show the tag number
with the description listed below. This report could be customized to show the
description as a new column and then the description would be located next to
the tag number. A new report can be designed to show the data found in any
view within the project.
Feb-10
129
Data Manipulation
Instrument Templates
The instrument templates are drawings that contain tokens that will extract the
data from the database and place onto the drawing. Bentley software provides
the drawings in multiple formats. The .DWG AutoCAD and .DGN Microstation
drawing formats are the most widely used. The templates provided will generate
drawings for loops, terminal connection, and card connection drawings among
others. Below is a template for a loop drawing.
Instrument Templates
Data Manipulation
130
Feb-10
The template shown contains graphics and text. The advantage to having the
tokens as text is that your company drawings can be easily converted to
templates. The graphics will not change, and the text can be converted to tokens.
Note the tokens in the Junction Box column. If you look back at the System
Queries for DocTokenLoop, the data in the TSTRIP field would be used for the
token &I2b.TSTRIP and the data in the first TN field would be used for the token
&I2b1.TN. Tokens are explained in depth in the I&W help file.
Electrical Templates
The Electrical Templates, just as with the Instrument Templates, are CAD based
drawings with graphics and tokens. Bentley provides a Motor drawing and a
single line drawing. When motors and MCC cabinets are built in I&W, these
templates can be used to produce drawings for delivery.
Macros
Macros are available and use the Microsoft Access Macro Builder. Macros would
normally be created for data manipulation.
Electrical Templates
Feb-10
131
Data Manipulation
Tables
Tables
Located within this node are the primary database tables relating to
Instrumentation. This is an interface for looking at the data within the tables.
Because of the relationships that are created between the tables when a new tag
is generated, you cannot add new data directly to these tables, but you can edit
existing data.
The final node within the main Instrumentation & Wiring interface is the Tables
node.
Expand the Tables node and double-click on the INSTR table. Note that all of the
instruments that have been created are located here. Browse across the fields
and note that data has been added to this table that was system generated.
Note: Fields that are grayed out are system fields and cannot be edited.
Data Manipulation
132
Feb-10
Module Review
Module Review
Now that you have completed this module, lets review what you have learned.
Questions:
1
Answers:
The filter command would be used to view the FT instruments only.
Data added to the table directly is data contained within that table only and is
not linked to the other necessary tables.
Yes, you can use your own drawings as templates; the text will have to be
changed to a token format so that it will pull the data.
Feb-10
133
Data Manipulation
Module Review
Data Manipulation
134
Feb-10
Module Prerequisites
Module Objectives
After completing this module, you will be able to:
Feb-10
135
136
Feb-10
Note: The New Layout Wizard allows you to give your layout a name and
Click Finish.
To create the first layout for the Training project. Layout Designer
displays.
Note: The Component Bar displays the loops that are associated with the
Feb-10
Hold down the left mouse button to drag the tag onto the layout near the
upper left-hand corner.
137
Release the mouse button to place the graphics onto the layout.
Note: Notice that the cable tag graphics are green. From the following chart,
Definition of Connections
Red
No Connections
Green
Purple
Blue
Yellow
Source Disconnected
Grey
Connected to Component on
Different Layout
Black
Cyan
click on the horizontal line that connects the graphics of instrument 200FT-300 and the graphics of the cable.
138
Feb-10
Dialog Task:
Definition of Task:
Save changes
Undo Changes
Feb-10
Connect
Disconnect
139
Dialog Task:
Definition of Task:
Find Source
Launch AutoConnect
Display Connected
Panel Number
140
Feb-10
Dialog Task:
Definition of Task:
The Connect Source Cores For Cable dialog shows that the cable is
connected to the instrument as its source.
12 Close the dialog.
The Loop Connections window displays the loop in its present state.
14 Close the dialog.
15 Double-click on instrument 200-FT-300 on the layout.
The read-only view of the entire 200-F-300 loop displays as shown in the
following figure.
Feb-10
141
Note: This feature becomes useful if the layout becomes cluttered with
142
Feb-10
Connecting Components
Connecting Components
In this section you are connecting instruments, field panels, and card panels. You
will also allocate I/O for the tags that were created earlier. Finally, you learn how
to internally wire your card panel.
Select Field Panels from the Instrumentation tab within the Component
Bar.
Note: The junction box is color-coded red to indicate that no connections have
been made.
4
Feb-10
143
Connecting Components
Click and hold the blue connection node, located in the center of the
graphic, and then drag the line to the panel graphic.
Note: The cable color code is now blue. This indicates the cable knows its
source and destination but only the source is connected. Also notice
that the new line between the cable symbol and the field panel symbol
has a node (click on the line and the node will appear).
6
Note: This dialog displays the cable (and cores) in the left-hand pane (the
source), and the field panel (and terminals) in the right-hand pane (the
destination).
144
Feb-10
Connecting Components
Note: Once the connection has been made, the connected terminal strip will
refer to the junction box terminal strip and the connected cable will
refer to the cable that has been connected.
complete.
Note: It is not necessary to connect the entire pair at one time. By clicking on
Feb-10
145
Connecting Components
The Loop Connections for [200-F-300] dialog displays all connections for
the current loop.
146
Feb-10
Connecting Components
Feb-10
Drag and drop the cable onto the layout above and between the field
panel and card panel.
147
Connecting Components
Click Connect.
Note: The cable is colored purple. The purple coloring indicates that the cable
panel.
11 Select Connect Cores in Panel: 200-JB-300.
148
Feb-10
Connecting Components
Notice the cable color changes to blue (to indicate the source and
destination are known, and the source is connected).
16 Right-click the right side of the cable between the cable tag and the card
panel.
17 Select Connect Cores in Panel: 200-DCS-300.
18 The Connect Destination Cores For Cable [200-JB-300] dialog opens.
19 Select TB1 from the Tstrip list within the Destination window.
300 will have to be disconnected and reconnected to the OAS for TB1.
22 Scroll down in the Destination window to terminal 25.
23 Double-click on terminal 25 to disconnect the OAS cable.
24 Scroll down in the Destination window to Tset 51 and select.
25 Select terminal 13 in the Source window.
Feb-10
149
Connecting Components
Ensure AI is selected from the filter list (in the left-hand pane).
150
Feb-10
Connecting Components
Click Connect.
Tag 200-FT-300 is now connected to the DCS300/AI-01-01 card.
by displaying the Connect Instruments to Card I/O List in Panel [200DCS300] dialog.
11 Click Yes.
Feb-10
151
Connecting Components
Select TB1 from the Tstrip list within the Source window.
Note: The check box at the bottom of the dialog labeled Use Source Terminal
Hint: You can change the color of the vendor supplied cable being terminated
below by selecting it from the dropdown list located in the tool bar at
the top of the window. Doing this prior to making any terminations has
the best results.
6
152
Feb-10
Connecting Components
window.
13 Click Yes.
Feb-10
153
Connecting Components
20 Click Yes.
154
Feb-10
Module Review
Module Review
Now that you have completed this module, lets review what you have learned.
Questions:
1
Answers:
The color codes give you an instant visual to determine if the cable has been
completely connected to both the source and destination.
The detail connection view gives a temporary graphical view of the loop to check
for completeness as well as accuracy.
Feb-10
155
Module Review
156
Feb-10
Layout Utilities
Module Overview
In this module you will learn how to manipulate the components found on the
layout. You will add a border to the layout thus making it a document. You will
create an assembly of a component group and then create terminal strips and
cables outside of the loop dialog. You will create a new by defining the
components that will be on the layout. You will finally learn to copy and paste
components and to align the components so make the layout orderly.
Module Prerequisites
Module Objectives
After completing this module, you will be able to:
Feb-10
Create an assembly.
157
Copyright 2010 Bentley Systems, Incorporated
Layout Utilities
Adding a borders
Note: The Documents dialog shows no defined documents. This because the
Click OK.
To return to the Documents dialog.
Select LAYOUT.
Layout Utilities
158
Feb-10
12 Click OK.
To save the changes and close the Properties for Document dialog.
13 Close the Documents dialog.
15 Zoom Out.
Feb-10
159
Layout Utilities
Right-click on 200-FE-300.
Click OK.
To display the New DOC_REG dialog.
Click OK.
10 Select iwd from the Type list (within the Properties window).
11 Select b_border.iwd from the Template list.
12 Set the Print Range to All.
13 Click OK.
Layout Utilities
160
Feb-10
16 Zoom Out.
Feb-10
161
Layout Utilities
Making an assembly
To preserve a complicated layout for future use, the assembly manager can be
utilized. The layout configuration is stored and can be placed on a different layout
at any time.
Using a window, select all of the instruments, field and card panels and
any associated cables.
Layout Utilities
Options:
Definitions:
Project Standards
Other standards
Lead Assembly
Insert
Create
Delete
162
Feb-10
Click Create.
Click Ok.
The software returns to the Select Assembly dialog with your new
assembly listed.
Click Insert.
Click OK.
To open the Edit Tags Numbers dialog.
This will open the Edit Loop dialog so that you can give the components
new tag numbers.
12 Select 200-F-300.
13 Click Edit.
Feb-10
163
Layout Utilities
Cooler.
Class Date: 18-Jul-2011
This will open the Edit Field Panel dialog so that you can give the
components new tag numbers.
20 Select 200-JB-300.
21 Click Edit.
22 Modify the tag to 200-JB-700.
23 Click OK.
24 Select the Group Name 200-DCS300.
25 Click browse.
This will open the Edit Card Panel dialog so that you can give the
components new tag numbers.
26 Select 200-DCS300.
27 Click Edit.
28 Modify the tag to 200-PLC700.
29 Click OK.
30 Click OK.
graphics.
Layout Utilities
164
Feb-10
Component Bar
Select Instruments.
Note: As you type in the Like window, the list becomes active and filters down.
Feb-10
165
Layout Utilities
Select 200-FT-300.
Association
Click Next.
Type 200-ALL-300.
Click OK.
Click Finish.
Note: You may have to select Refresh and All to view the new instrument.
7
Select 200-ALL-300.
Click Associate.
Set Loops.
10 Select 200-F-300.
11 Click OK.
Layout Utilities
166
Feb-10
Note: The instrument is now associated with the loop 200-F-300, but will still
Click Next.
Type 200-AHH-300.
Click OK.
Click Associate.
Set Panels.
Select 200-JB-300.
Click OK.
Feb-10
167
Layout Utilities
Layout Utilities
Select 200-ALL-300.
Select New.
Click OK.
168
Feb-10
Click OK.
Select 200-ALL-300.
10 Click Design.
11 Add 3 terminals.
12 Click OK.
13 To return to the Tstrips dialog.
Select AT_CABLE.
Click OK.
Click OK.
Drag and drop cable 200-ALL-300 onto the layout next to the 200-ALL-300
graphic.
10 Click Connect.
Feb-10
169
Layout Utilities
Note: The dialog has now converted to a cable dialog providing the ability to
18 Right-click on the right cable between the cable graphic and the field
panel.
19 Select Connect Cores from the context menu.
Layout Utilities
170
Feb-10
Feb-10
171
Layout Utilities
Click Next.
Set Panels.
10 Select 200-JB-700.
11 Add it to the Selected Components window.
12 Set PLC/DCS Cards.
13 Select 200-PLC700.
15 Click Finish.
Layout Utilities
172
Feb-10
Note: The connections are already complete because the 200-F-700 loop was
an assembly that was inserted into the Training Analog Loops for Panel
200-JB-300. Non-connected components can be added to the layout
and will have to be connected manually.
Select Analog Loops for Panel 200-JB-300 from the layout list.
Zoom out.
So that all components on layout can be viewed.
Feb-10
173
Layout Utilities
Layout Utilities
174
Feb-10
Click OK.
Click Yes.
To delete.
Feb-10
175
Layout Utilities
Module Review
Module Review
Questions:
1
Do terminal strips and cables have to be created and designed within the
new or edit loop dialogs?
Answers:
Now that you have completed this module, lets review what you have learned.
Layout Utilities
The original description indicated that the components were specifically for 200JB-300 and when instrument 200-FT-312 was added, the description was no
longer valid.
No, within Layout Designer, you can create and design terminal strips and cables
via the Terminal Strip/Cable dialog.
Yes.
176
Feb-10
Instrumentation Drawings
Module Overview
In this module, you are introduced to the CAD drawing generation features of
Instrumentation & Wiring. These drawings fall into three categories; autogenerated drawings for loop and panel connection details, template-based loop
and panel diagrams, and IWD drawings to make quick loops from the layouts.
Module Prerequisites
Module Objectives
After completing this module, you will be able to:
Feb-10
Copy templates.
Modify templates.
Delete templates.
177
Copyright 2010 Bentley Systems, Incorporated
Instrumentation Drawings
Instrumentation Drawings
Instrumentation Drawings
Select 200-F-700.
Select Properties.
Instrumentation Drawings
178
Feb-10
Instrumentation Drawings
based on the data of the loop. This template can eliminate the need for
multiple templates.
14 Select File > Exit.
Feb-10
Select 200-FT-700.
179
Instrumentation Drawings
Instrumentation Drawings
In the Loop Properties window, click browse in the Loop Symbol field.
Click OK.
The symbol has now been assigned to the instrument for auto generated
drawings.
8
Select 200-JB-700.
Instrumentation Drawings
180
Feb-10
Instrumentation Drawings
Note: The steps are the same for creating an auto-generated loop or an auto-
Feb-10
181
Instrumentation Drawings
Templates
Templates
Click Design.
To launch Template Generator and display the Templates Settings dialog.
Instrumentation Drawings
Click Done.
182
Feb-10
Templates
10 Press Enter.
Feb-10
183
Instrumentation Drawings
Templates
Note: The screen captures documented in this material represent ACAD 2006
database. The "I" character indicates that the data is an instrument. The
"2" character indicates that the data is located second in order within
the database. The "a" character indicates the data is in connection
position A. The ITYP characters indicate the field in which the data
resides. For a better understanding of tokens, refer to the Template
Generator on-line help.
12 Press Esc.
Notice that it is a circle, and not a block. Because the templates are just
lines, circles, and text, any customer drawing can be used as a template.
17 Press Esc.
Instrumentation Drawings
184
Feb-10
Templates
Practice zooming in and out of the drawing to become familiar with the
different types of tokens on the drawing.
19 Select File > Exit.
Class Date: 18-Jul-2011
Right-click on Xaiao.dwg.
Select New.
Click OK.
Click OK.
Select Edit.
Feb-10
185
Instrumentation Drawings
Templates
16 Maximize AutoCAD.
17 Zoom in around the C column.
18 Remove the graphics and text.
Class Date: 18-Jul-2011
c.
21 Change the token text on the left side of terminal strip from c to b.
Hint: If you are unsure of what the token should be, maximize Layout Designer
and the Detail Connection Window. Hover the cursor over the terminals
and the token will appear.
Xaiao_Modified.dwg appears as below.
Instrumentation Drawings
186
Feb-10
Templates
Click OK.
To create the new document and close the New Document dialog.
Feb-10
187
Instrumentation Drawings
Templates
14 Click OK.
To accept the selection and return to the Properties for Document dialog.
15 Click OK.
16 To accept the changes made in the Properties for Document dialog and
Select CONNECT.
Click Yes.
To confirm deletion.
Instrumentation Drawings
188
Feb-10
Module Review
Module Review
Now that you have completed this module, lets review what you have learned.
Questions:
1
What does the & stand for in the token, the numeral?
Answers:
Yes, a loop can have multiple documents assigned to it.
The Doc Application property and the template selected determine how the
autogenerated document is created?
The & directs the software to search the databases, the numeral tells
the software the order of the component it needs to pull.
Feb-10
189
Instrumentation Drawings
Module Review
Instrumentation Drawings
190
Feb-10
Module Prerequisites
Module Objectives
After completing this module, you will be able to:
Feb-10
191
Copyright 2010 Bentley Systems, Incorporated
10 Click OK.
11 Select LT from the list of standards available in the New Instrument Loop
Step 2 dialog.
12 Click Next >.
13 Type 200-L-300 in the Loop Tag field.
14 Click OK.
192
Feb-10
15 Click Finish.
Select 200-LT-300.
Click Design.
Note: The existing signal terminals are displayed with the + and terminals as
part of TSet 1.
Feb-10
Select TSet 1.
Type L, N and G into the Term column for each respective row.
193
Click OK.
Note: The new power terminals have been inserted as TSet 1 and the signal
Click OK.
To save the changes and close the Edit TSTRIP [200-LT-300] dialog.
Click OK.
To save loop 200-L-300.
Click OK.
194
Feb-10
In this section, you add the new powered loop to the existing layout (Analog
Loops). You will add the electrical cable to the layout and design the cores. Finally
you will connect the electrical cable to the instrument.
Feb-10
Click Instruments.
195
Arrange the symbols so that the layout appears similar to the figure.
Select 200-LT-300 as the Cable Source and leave the Cable Destination
blank.
196
Feb-10
Click Connect.
This dialog displays because the cores for cable PWR-001 have not yet
been defined.
8
Click OK.
Click OK.
To close the Connect Cores For Cable dialog
Feb-10
197
Note: The Tstrips Window displays terminal strip tags when instruments and
15 Click OK.
198
Feb-10
Feb-10
199
200
Feb-10
Click OK.
Click Design.
Click Add.
11 Click OK.
Feb-10
201
14 Click OK.
15 Add the links using the Links toolbar as shown below.
16 Click OK.
202
Feb-10
Select DB-01.
Click Design.
Click Add.
Click OK.
To return to the New Cable dialog.
Click OK.
To return to the New Electrical Panel dialog.
Verify that the cable DB-01 has panel 200-DB-01 specified as its Source
(within the Cable Properties window).
Click OK.
Feb-10
Drag and drop 200-DB-01 from the Electrical Panels list onto the layout to
the right of cable PWR-001.
Select DB-01 from the Electrical Cables list onto the layout to the right of
panel 200-DB-01.
203
Terminate the cores of cable DB-01 onto terminals L1, N1, and G1 on PTS01.
Drag and drop the connection node onto electrical panel 200-DB-01.
204
Feb-10
Feb-10
205
Click New.
To display the Setup New DOC_REG Tag Types dialog.
Click OK.
To display the New DOC_REG dialog.
Click OK.
206
Feb-10
Feb-10
207
Module Review
Module Review
Questions:
1
Why did you insert the new terminal set instead of add it?
Why did you type ELECT into the Cable Application field?
Answers:
1
It does not matter if you insert or add a terminal set; the terminal set was
inserted in this case so the layout would show the distribution panel above the
field panel.
ELECT was typed into the Cable Application field so that the cable would
be shown as an electrical cable instead of an instrument cable.
Now that you have completed this module, lets review what you have learned.
208
Feb-10
Module Overview
In this module, you learn how to create an intrinsically safe loop. This loop
requires building a device in a field panel then cross-wiring the device to the loop.
Module Prerequisites
Module Objectives
After completing this module, you will be able to:
Feb-10
Place jumpers.
Create a device.
Jumper terminals.
Connect to a device.
209
Copyright 2010 Bentley Systems, Incorporated
In this module you will build the intrinsically safe loop similar to the one shown
below.
Create a new instrument loop for 200-TT-301 from the system standard
TT.
Type Intrinsically Safe Barrier Panel in the Field Panel Remarks field.
210
Feb-10
Click Ok.
Click Finish.
Click New.
Click OK.
To close the dialog and open the New Device dialog.
Feb-10
Click Ok.
Click Design.
211
Using the arrows on the left and right, add two terminals to each side.
212
Feb-10
Click Connect.
Feb-10
213
Click OK.
Select the Cable tab, click Design and then click Add.
214
Feb-10
19 Click OK.
20 Click OK.
21 To return to the New Field Panel dialog.
22 Click OK.
Click New.
To open the Setup New Tstrip Tag Types dialog.
Feb-10
215
Click OK.
To open the New TSTRIP dialog.
10 Click OK.
11 Select the Tstrip tab.
12 Select TS-3.
13 Click Design.
14 Click Add.
16 Click OK.
To create the terminal strip and return to the Edit Terminal Strip dialog.
17 Click Add.
18 Add one terminal.
19 Type OAS in the Term field.
216
Feb-10
21 Click OK.
22 Click New.
23 Clear Also Create Cable.
24 Type PS-1 in the New TSTRIP field.
25 Click OK.
26 Select PS-1 from within the Tstrip window.
27 Click Design.
28 Click Add.
29 Add the terminal sets as shown below.
30 Click OK.
Feb-10
217
32 Click OK.
36 Click OK.
37 Click OK.
218
Feb-10
Highlight 200-DCS300.
Click Ok.
Click OK.
To save and close the dialog.
Feb-10
219
Click Finish.
Drag and drop all components of the loop onto the layout.
In this section you connect all of the components that were created.
Right-click on 200-JB-301.
Repeat step 4 and place jumpers from all fused terminals to the terminals
right below them.
220
Feb-10
Once the jumpers have been added, its time to cross wire the terminal
strips.
8
10 Click Save.
11 Close the dialog.
Feb-10
221
Grab the center node and drag and drop onto 200-LJB-300.
Save and close the Connect Destination Cores For Cable dialog.
10 Drag and drop cable 200-LJB-300 onto the layout between 200-LJB-300
and 200-JB-301.
11 Select 200-JB-301 as the Cable Destination.
12 Click Connect.
13 Right-click on the connection between cable 200-LJB-301 and field panel
200-LJB-300.
14 Select Connect Cores in Panel.
222
Feb-10
looking at the detail connection view. The ISB1 shown in the detail
connection view will show a left connection and a right connection. The
right connection does not appear to be connected because the cable
has not been terminated on its destination side.
Feb-10
Drag and drop 200-PS-301 onto the layout to the right of 200-JB-301.
Drag and drop 200-PS-301 onto the layout between 200-PS-301 and 200JB-301.
223
12 Save and close the Connect Destination Cores For Cable dialog.
13 Click on the graphic for cable 200-LJB-300.
14 Drag and drop node onto 200-JB-301.
15 Connect core 1 of cable 200-LJB-300 to terminal 2 of TS-3.
16 Connect core 2 of cable 200-LJB- 300 to terminal 3 of TS-3.
DCS301.
20 Designate 200-DCS301 as the destination for the cable.
21 Click Connect.
22 Right-click on the link between the cable TS-3 and the junction box 200-
JB-301.
23 Select Connect Cores in Panel.
24 Select TS-3 from the Tstrip list in the Source pane.
25 Connect core 1 of cable TS-3 to terminal 3 of TS-3.
224
Feb-10
27 Save and close the Connect Source Cores For Cable dialog.
28 Right-click on the link between the cable TS-3 and DCS panel 200-DCS301.
29 Select Connect Cores in Panel.
31 Connect cores 1 and 2 of TS-3 to Tset 1 of AI-02-06 terminals 15V and A1.
32 Save and close the Connect Destination Cores For Cable dialog.
33 Select 200-TT-301.
34 Select View > Detail Connection Window.
Feb-10
225
226
Feb-10
Module Review
Module Review
Now that you have completed this module, lets review what you have learned.
Questions:
1
Answers:
Click the terminal and move the down arrow to the appropriate terminal to
create a jumper between the two terminals.
Feb-10
227
Module Review
228
Feb-10
Course Summary
You are now able to use the Bentley Instrumentation & Wiring application as a
tool to increase your productivity when creating instrumentation documents.
Course Summary
Feb-10
Manipulate Data .
Connecting Components.
229
Copyright 2010 Bentley Systems, Incorporated
Course Summary
Course Review
Course Review
Questions
Now that you have completed this course, lets measure what you have learned.
True/False: Loop tags can only be created within the Instrumentation views?
Does a terminal strip have to be designed within the New Loop or Edit Loop
dialogs?
Course Summary
230
Feb-10
Course Review
Answers
1
False, Loop tags can be generated within the Instrumentation views as well as
the Layout Designer.
By creating an assembly of the instruments, the layout can be used over and
over.
True, applications are launched from the Instrumentation & Wiring Applications
menu.
The Detail Connection Window is used to see the graphical connection of the
instruments.
13 Cloning the terminal will graphically show multiple cables tied to one terminal.
14 Yes, the layout and detail connection can both have borders assigned to them
and therefore become a document for delivery.
15 Create the relay as a device in the junction box.
16 A card panel is a panel containing multiple components like landing terminal
strips, power supplies, card racks and I/O cards.
17 Yes, new instrument tags can be added in either the Instrumentation & Wiring
interface or in the Layout Designer interface.
18 A component is fully connected if its color on the layout is black.
19 Yes, by cloning a terminal, two wires can be placed on a terminal.
20 Yes, if the tag is existing in the instrument list, it can be assigned I/O without
being connected to the I/O panel.
21 Yes, you can edit the templates via AutoCAD or Microstation.
22 Yes, relays and other devices can be connected and shown on the
Instrumentation & Wiring loops.
Feb-10
231
Course Summary
Course Review
Course Summary
232
Feb-10
V8i (SELECTseries1)
TRN011520-1/0002
AccuDraw, Bentley, the B Bentley logo, MDL, MicroStation and SmartLine are
registered trademarks; PopSet and Raster Manager are trademarks; Bentley SELECT is a
service mark of Bentley Systems, Incorporated or Bentley Software, Inc.
AutoCAD is a registered trademark of Autodesk, Inc.
All other brands and product names are the trademarks of their respective owners.
Patents
United States Patent Nos. 5,8.15,415 and 5,784,068 and 6,199,125.
Copyrights
2000-2010 Bentley Systems, Incorporated.
MicroStation 1998 Bentley Systems, Incorporated.
All rights reserved.
Trademarks
234
Feb-10
Course Description
FOUNDATION fieldbus is an all-digital, serial, two-way communications system
that allows the connection of intelligent field instruments to a DCS system.
Course Overview
Target Audience
This course is recommended for the following audience(s):
Feb-10
The course could also be used as a refresher course for more advanced users
who have not used the software for a time.
1
Copyright 2009 Bentley Systems, Incorporated
Course Overview
Prerequisites
Prerequisites
Course Objectives
After completing this course, you will be able to:
Design the internal cables for the fieldbus panel and segment trunk cables.
Course Overview
Feb-10
Modules Included
Modules Included
Using Multiplexers
System Requirements
You must have a CD drive or Internet access for product installation. The
following prerequisites are required to run the modules included in
Instrumentation & Wiring V8i Edition:
Feb-10
Processor:
Operating
System:
Internet:
Memory:
Hard Disk:
Input Device:
Output Device:
Video Graphics
Card:
Course Overview
System Requirements
Document
Management:
Cad Engines:
Microsoft Office:
Databases
Supported:
ORACLE 81, 9i
Course Overview
Feb-10
3 Click Unzip.
The file is extracted to the root directory of the C drive (C:\).
4 Click Close.
5 Open the Windows Start menu.
6 Select Programs > Bentley > Plant V8i > Project Tools > Project
Administrator.
7 Select File > Add Root.
The Browse for Folder dialog opens.
Note: You cannot create a project root directory under a project directory.
Therefore, in order for this option to be available in the File menu, you
must select something at the primary root level of the navigation tree.
Feb-10
Course Overview
Note: The project root folder, C:\ Bentley Training Project now appears in the
Course Overview
Feb-10
Composite Drawings
The different types of Fieldbus Segment templates included in the software are
illustrated by the four composite drawings below. You will become more familiar
with these drawings as the training progresses. Composite drawings now bring
the best of both worlds from previous versions, consisting of both Template and
Auto generation. Merging the AutoGEN and Template together was our initiative
to save both template numbers and variations within network/segment design.
Feb-10
Course Overview
Course Overview
Feb-10
Network Topologies
Network Topologies
The functionality with Bentley Instrumentation and Wiring has been designed to
support Daisy chain and tree topologies.
Feb-10
Course Overview
Course Overview
10
Feb-10
Module Overview
In this module you will build a new FOUNDATION Fieldbus segment.
Module Prerequisites
Module Objectives
After completing this module, you will be able to:
Building a FOUNDATION
Fieldbus Segment
Feb-10
245
246
Feb-10
1 Select Programs > Bentley > Plant V8i > Instrumentation from your
Windows Start menu.
6 Click Finish.
7 Close Layout Designer.
Feb-10
247
248
Feb-10
12 Click OK.
Note: The New Instrument Fieldbus Segment dialog presents five options:
three for creating a new instrument fieldbus segment group, one for
creating a new individual instrument tag and one for creating a new
individual fieldbus segment tag.
4 Set the From Scratch radio button.
Feb-10
249
Note: The cable that is generated for a fieldbus segment instrument does not
have the same tag types as those for regular Instrument cables.
Note: FOUNDATION Fieldbus instruments are connected to the bus segment
through a length of cable called a SPUR. A spur can vary in length from
3.28ft (1m) to 394 ft. (120m). Instrumentation and Wiring uses the tag
type AT_SPUR to indicate that a cable is a fieldbus spur cable and not a
regular instrument cable.
Note: A spur that is less than 3.28ft (1m) in length is called a SPLICE.
250
Feb-10
11 Click OK.
Feb-10
251
13 Click OK.
14 Click Finish.
The New Fieldbus Segment dialog opens with the All tab selected. It shows
that a segment tag, instrument tag, terminal strip tag, and cable tag have
been created. Although these components have a tag number allocated in
the database, the details for each have not been defined.
The All tab displays the contents of the segment, including the tag types
for each component. The Segment, Instr, Tstrip, Spur/Splice, and Doc tabs
display only components of that tag type. The properties for the selected
components are listed in the window along the right-hand side of the
dialog.
Notice the Auto Rename check boxes in the left-hand pane. If this
segment is saved as a standard and used as a template in creating future
segments, the components of the new segments will automatically inherit
new tag numbers for the components that have the Auto Rename check
box set. Additionally, if you change the name of the current segment
within this dialog, then all components of the loop will be automatically
renamed if the tag component parts match.
252
Feb-10
To place a check in the Auto Rename check box, you must select the item
in the list and then click Setup. From the Tag Attributes dialog you and
change the value for the check box. You can also place a check mark next
to the component under its specific tab. For example check instrument
components while the Instr tab is selected.
Within the Standards group box there are two buttons, Build From and
Save As. The Build From button is used to select a standard from which the
current segment will be defined. The Save As button will save the current
segment configuration as a standard to be used again.
Within the Tags group box there are five buttons: New, Edit, Delete,
Remove and Setup. The New button will create a new tag within the loop,
the Edit button will allow you to edit the tag, the Delete button will delete
the selected tag from the project database, the Remove button will
remove the tag from the segment but not delete from the tag from the
database, and the Setup button will allow you to change the properties of
the tag.
The Design button will allow a user to design the terminal strip or the
cable for the segment and finally the Property View Options dialog will
allow user to change the fields listed in the properties window as shown
below.
15 Click Cancel.
The dialog closes.
16 Select the Instr tab.
17 Type Temperature Transmitter in the Description field of the Properties
window.
18 Select BUS_AI in the I/O Type field.
Feb-10
253
254
Feb-10
4 Click Add.
The Add Terminal Set dialog enables you to add new connection rows to
the current Tstrip. The Terminal window allows you to define the number
of individual terminals to be included in the new terminal set. The Repeat
window allows you to type the number of repeated connection rows to be
inserted into the current Tstrip in this field, or use the spinner button to
select the appropriate value.
Note: A row refers to an individual terminal and a row set refers to a group of
rows that are wired for one function. For example, a powered
instrument would have a row set of 3 rows for the powered cable and a
row set of 3 rows for the instrument cable. The row set definitions are
critical for building a loop in the Detail Connection Window and autogenerated loops.
To select from a list of pre-defined standard row sets, click Build From to
display the Build From Standard Terminal Set dialog. To save the current
row set details as a standard which can be used as a template in building
new row sets, click Save As to display the Save as Standard Terminal Set
dialog. To copy the current row set terminal, click Copy. To clone the
current row set terminals, click Clone. To remove a row set from the
current Tstrip, place your cursor within the appropriate row, then click
Delete. After you are finished defining the details of the new connection
set, click OK to add the new terminals to the current Tstrip, or click Cancel
to abort the new terminal set insertion process. The Links toolbar enables
you to place graphical representations (no associated database
information) of links, fuses, and linked terminals.
5 Set the Terminal field to 3.
6 Ensure the Repeat field contains a value of 1.
Feb-10
255
Note: The + and - have been added to the Term column. Also, the tie back
symbol in row 3, column 3 indicates that the SCR has been tied back.
256
Feb-10
11 Click OK.
12 Click OK.
The Edit Fieldbus Segment dialog is returned.
3 Click Design.
cable containing a hot, neutral and ground. The core set definitions are
Feb-10
257
The Add Core Set dialog enables you to add new cable cores to the current
cable. Use the Core spinner button to indicate the number of individual
cores to be included in the new Core Set. In the Repeat window type the
number of repeated cores to be inserted into the current cable in this
field, or use the spinner button to select the appropriate value. To copy
the current core set terminal, click Copy. To remove a core set from the
current cable, place your cursor within the appropriate row, and then click
Delete. After you are finished defining the details of the new core set, click
OK to add the new cores to the current cable, or click Cancel to abort the
new core set insertion process.
5 Set the Core field to 3.
6 Ensure the Repeat field contains a value of 1.
The Cores are created.
7 Type WH in the first row of the Core column.
8 Type BK in the second row of the Core column.
258
Feb-10
10 Click OK.
Feb-10
259
Note: Only instruments directly connected to the brick are made part of the
4 Select Associate.
Note: The dialog shows how many instruments will be associated with the
260
Feb-10
11 Click Edit.
Feb-10
261
12 Click OK.
To accept the terminals.
13 Click OK.
14 Click OK.
The EDIT Fieldbus Segment dialog is returned.
262
Feb-10
11 Click OK.
12 Select 100-TY-202 from the Source field in the Spur/Splice Properties
window.
13 Set the Auto Rename check box.
14 Select the Instr tab.
15 Select 100-TY-202.
16 Select 100-TY-202 from the Tstrip field in the Instr Properties window.
17 Click Save.
18 Click OK.
The EDIT Fieldbus Segment dialog closes.
Feb-10
263
Note: The cable tag graphics are green. From the following chart, determine
Definition of Connections
Red
No Connections
Green
Purple
Blue
Yellow
Source Disconnected
Grey
Black
Cyan
264
Feb-10
Note: Color shown on the graphic may not correspond to the colors on your
machine.
Feb-10
265
Module Review
Module Review
Questions
1 What does the green color represent on the layout?
2 Why did you save the cable configuration as a standard?
Answers
1 The green color indicates that the core is connected to its source but does
not know its destination.
2 The cable configuration was saved as a standard to save time when
designing additional cores.
Now that you have completed this module, let's review what you have learned.
266
Feb-10
Building FOUNDATION
Fieldbus Panels
Module Overview
In this module you learn how to build and modify FOUNDATION fieldbus panels
using the Bentley Instrumentation and Wiring interface.
The FOUNDATION fieldbus panel will house the segment Brick or Megablock, plus
associated terminals strips.
You also learn how to store these components as project standards, which can be
used as templates when building future FOUNDATION fieldbus panels.
Module Prerequisites
Module Objectives
After completing this module, you will be able to:
Feb-10
Design the internal cables for the fieldbus panel and segment trunk cables.
267
Field Columns
Card Columns
Tag
Number
Local
Junction
Box
Secondary
Junction
Box
Primary
Junction
Box
Marshalling
Strip
CB, Relay
or Barrier
Card
Terminal
Strip
Card
Terminals
Card
Address
268
Feb-10
configuration and how each of the components fit into this spreadsheet-type
view.
Two new properties have been created for bricks, terminals strips and devices.
These are ConPos Type (Connection Position Type) and Connection Position.
ConPos Type can be either Dynamic (default) or Fixed. Connection Position can be
A to Z as shown above.
If the ConPos Type is set to Dynamic, then the Connection Position individual
terminals on a brick, terminal strip or device can change automatically depending
on how many levels of connections are made. For example, if an instrument is
connected directly onto a junction box terminal strip, the instrument terminals
would be on connection position A and the connected junction box terminals
would be on connection position B, i.e. the next connection position from left to
right. If the designer then introduced a new junction box in-between the original
instrument and the original junction box, the new connected junction box
terminals would be on connection position B and the original connected junction
box terminals would dynamically move along one connection position to C. This
method of working is perfectly acceptable for relatively simple control networks.
However, if you are attempting to model more complicated control networks
(with varying levels of interposing panels), you can end up with different
terminals, on the same terminal strip, on different connection positions. This can
make the layout of templates tricky.
If you set the ConPos Type to Fixed for a brick, terminal strip or device, the
terminals associated to that brick, terminal strip or device are locked to the
specified connection position irrespective of how many levels of connections
come before them. In the example above, the primary Junction Box terminal strip
Feb-10
269
270
Feb-10
Feb-10
271
13 Click OK.
14 Click Finish.
The New Fieldbus Panel dialog is very similar to the New Fieldbus Segment
dialog except for the tabs. All of the buttons along the bottom of the
dialog operate just as in the New Fieldbus Segment dialog detailed in the
previous module. The Dev tab is used in the Fieldbus Panels and Card
Panel dialogs for devices such as relays, I.S. barriers and segment
terminators to be tagged and designed. The New Fieldbus Panel dialog
defaults to display the All tab, which shows that a tag was created for the
junction box, terminal strip, cable and document.
272
Feb-10
instrument spurs. The brick contains 14 ports, 12 ports for instrument signals
and 2 ports for the trunk cables into and out of the brick.
1 Select the Tstrip/Brick tab.
Class Date: 18-Jul-2011
2 Select 100.
3 Click Edit.
4 Type BRICK-100 in the Edit TSTRIP field.
5 Click OK.
6 Change the Brick ConPos. Type field to Fixed.
8 Click YES.
9 Click Design.
The Edit TSTRIP[Brick-100] dialog displays.
10 Click Add.
instead of Tsets. There are two extra ports added to each brick, one to
connect the trunk cable and the other to connect bricks together.
15 Click OK.
Feb-10
273
17 Click Edit.
18 Select the label field Port 13.
19 Type Trunk Out.
20 Edit terminals to Out+, Out S and Out-.
21 Click OK.
22 Place your cursor in Tset14.
23 Click Edit.
24 Select the label field Port 14.
25 Type Trunk In.
26 Edit terminals to In+, In S and In-.
27 Click OK.
28 Click OK.
29 Click OK.
The New Fieldbus Panel dialog displays.
30 Click Yes, if prompted.
31 Click Save As in the Tstrip/Brick window.
32 Type 12 Port Brick in the Tstrip field.
274
Feb-10
33 Click OK.
34 Click Build From.
Note: This verifies that the Brick was stored. The 12 Port Brick is listed as a
Class Date: 18-Jul-2011
standard.
35 Click Cancel.
The next step is to create a small marshalling tstrip inside the fieldbus panel.
This tstrip can be used to marshal the signals from multiple segment bricks
and carry them back to the control system via a single multi-core cable.
As an example, the fieldbus panel could contain 5 bricks with 12 instruments
connected to each. All 60 signals could be marshaled within the fieldbus panel
and carried back to the control system via a 5-pair cable.
1 Ensure the Tstrip/Brick tab is still selected.
2 Click New.
3 Select AT_TSTRIP as the Tag Type and Tag Code N.
4 Click OK.
5 Type TS-1 in the New TSTRIP dialog.
6 Click OK.
8 Click OK.
The terminal strip is generated.
9 Click OK.
The New Fieldbus Panel dialog is returned.
10 Change the Brick Connection Position Type field to Fixed.
Feb-10
275
13 Select Save.
276
Feb-10
17 Click Connect.
18 Click Yes.
Feb-10
277
20 Click OK.
21 Click Yes.
The New Fieldbus Panel dialog is returned.
22 Click Save.
278
Feb-10
2 Select 100.
3 Click Edit.
5 Click OK.
6 Click Design.
The Edit Cable dialog displays.
7 Click Add from the Core Set group box.
The Add Core Set dialog displays.
9 Type WHT for the first core in the Core field.
10 Type BLK for the second core.
11 Type SHD for the third core.
12 Click OK.
The Edit Cable dialog displays.
13 Click Save As Standard.
14 Type Belden in the Manufacturer field.
15 Type Trunk Cable in the Cable Type field.
16 Click OK.
17 Select TS-1.
18 Design the cable using the standard created above.
19 Select Yes in the Internal Cable field of the Cable/Trunk Properties
window.
Note: An internal cable is a cable to be used within the field panel only.
20 Click New.
21 Make the selections shown below.
22 Click OK.
Feb-10
279
280
Feb-10
Feb-10
281
282
Feb-10
16 Select Save.
17 Select Swap Source/Destination.
18 Select TS-1 from the Internal Cable list.
Class Date: 18-Jul-2011
20 Connect as shown.
21 Select Save.
22 Select T1 from the Internal Cable list.
Feb-10
283
25 Select Save.
26 Close the dialog.
27 Select Fieldbus Spurs/Cables.
28 Drag and drop cable 100FBP100 onto the layout to the right of panel 100FBP-100.
29 Right-click on the graphic of the cable.
30 Click Connect to the Connect Cable dialog.
284
Feb-10
Feb-10
285
10 Click OK.
The terminal strip is generated.
11 Click OK.
The New Field Panel dialog is returned.
12 Change the Connection Position Type field to Fixed.
13 Select Connection Position to M.
14 Select the Cable tab.
15 Type BUS in the Cable Application field in the Cable Properties window.
16 Click Setup.
17 Change the Cable Tag Type to AT_TRUNK.
18 Design the cable from the project standard Belden/Trunk Cable.
19 Click OK.
The cable is generated and the New Field Panel dialog is returned.
20 Click OK.
The marshalling panel is saved.
286
Feb-10
21 Drag and drop panel and trunk 100-FMP-100 onto the Fieldbus Layout to
the right of the Fieldbus panel 100-FBP-100.
Feb-10
287
Module Review
Module Review
Questions
1 When connecting the internal cables of 100-FBP-100, why did you have to
connect the individual cores?
2 What does the Swap Source/Destination icon do?
Answers
1 The cores had to be connected individually because the terminals were in
different configurations and could not be connected directly.
2 The Swap Source/Destination icon will switch the source and destination
windows in the connection dialog so that the user does not have to close
and re-open the dialog.
Now that you have completed this module, let's review what you have learned.
288
Feb-10
Module Prerequisites
Module Objectives
After completing this module, you will be able to:
Feb-10
289
290
Feb-10
11 Click No.
12 Type Area 100 PCS Panel in the Card Panel Remarks field.
Feb-10
291
292
Feb-10
25 Click OK.
26 Click Finish.
Feb-10
293
In this section, you learn how to define the parameters of the H1 card in the
Properties window and design the termination points.
294
Feb-10
21 Click Add.
Note: Four ports should now display for the new H1 card. You can edit the IP
22 Click OK.
3 Select R-N in the Tag Codes field for Card Tag Types.
Feb-10
295
4 Select R-N in the Tag Codes field for Tstrip Tag Types.
5 Click OK.
6 Tag the new card R1-S4.
7 Click OK.
8 Select R1-S4.
9 Select CC-PFB401 from the Card Type list.
10 Select BUS* in the I/O field of the Card Properties window.
11 Select Secondary from the Redundancy list.
12 Type C1 for Controller.
13 Type N1 for Node.
14 Select the Card Tag R1-S4.
15 Click Design.
16 Ensure that the I/O Type of BUS* is selected in the list at the top of the
Edit Ports dialog.
17 Set the Ports to 4 in the lower left corner of the Edit Ports dialog.
18 Click Add.
19 Click OK.
296
Feb-10
5 Click Design.
6 Click Add.
7 Click OK.
The New Card Panel dialog is returned, and the Connection Position
Propagation message displays.
8 Click OK.
9 Select R1-S4.
10 Repeat steps 3 through 8 to design the terminal strip for the secondary
card.
Feb-10
297
Note: The Connection Position Type and Connection Position will be identical
14 Click OK.
The New Card Panel dialog is returned.
15 Select Fixed in the Connection Position Type field.
16 Select F in the Connection Position field.
11 Create a new Tstrip with a Tag Type of AT_TSTRIP and Tag Code of N.
298
Feb-10
A power conditioner is a device in the card panel. The cable connecting the power
conditioner to the H1 card performs a dual function. It provides both power to
the network and carries the communication signals to the H1 card.
3 Select AT_DEVICE and N from the Setup New Device Tag Type dialog.
4 Click OK.
5 Type PC1 in the New Device dialog.
6 Click OK.
7 Select POWER CONDITIONER in the Type field.
8 Select Yes in the Internal Terminator field.
9 Select On in the Terminator State field.
10 Select Fixed in the Connection Position Type field.
12 Click Design.
Feb-10
299
14 Click Connect.
15 Make the connections as shown.
300
Feb-10
16 Click OK.
17 Click Yes.
7 Click OK.
8 Change the Cable Application from INSTR to BUS.
9 Select 100-PCS-100 from the Source field list in the Properties window.
Note: This cable is connecting components inside the I/O Card panel 100-PCS-
100.
Feb-10
301
11 Click Design.
12 Design the cable using the Belden/Trunk Cable standard.
13 Click OK.
The New Cable dialog is returned.
14 Click OK.
15 Click OK.
The panel and its components are saved.
302
Feb-10
Feb-10
303
304
Feb-10
Module Review
Module Review
Now that you have completed this module, let's review what you have learned.
Questions
1 What is the reason to make a primary and secondary card?
Answers
1 In case of a failure of the primary card, the secondary card will be used.
2 The Power Conditioner provides power to the network and carries the
communication signals to the H1 card.
Feb-10
305
Module Review
306
Feb-10
Module Overview
In this module, you will complete the connection of the fieldbus components on
the layout.
Module Prerequisites
Module Objectives
Feb-10
307
308
Feb-10
The cable color code is now blue, which indicates the cable knows its
source and destination but only the source is connected.
5 Connect 100-TY-202 in the same manner.
Class Date: 18-Jul-2011
The cable color code is now black, indicating that the connections are
complete.
11 Connect 100-TY-202 in the same manner using TSet 2.
12 Select 100-TT-202.
13 Select View > Detail Connection Window.
Feb-10
309
The Loop Connections dialog displays all connections for the current loop.
310
Feb-10
3 Right-click the right side of the cable between the cable tag and the card
panel.
The context menu displays.
4 Select Connect Cores in Panel: 100-FMP-100.
Feb-10
311
3 Right-click the right side of the cable between the cable tag and the card
panel.
The context menu displays.
4 Select Connect Cores in Panel: 100-PCS-100.
The Connect Destination Cores For Cable [100-FMP-100] dialog displays.
5 Select PC1 in the Destination Tstrip list.
6 Connect as shown below.
312
Feb-10
8 Click Yes.
Feb-10
313
Creating a Document
Creating a Document
3 Select 100-FBP-100.
4 Select Document Properties.
314
Feb-10
Creating a Document
Feb-10
315
Module Review
Module Review
Questions
1 Why did you have to connect the individual cores when connecting the
instruments to the brick?
2 Can you connect cores to more than one terminal strip?
Answers
1 The connection of the individual cores allows you to connect the positive
and negative cores when they are in different arrangements.
2 You can connect cores to different terminal strips within the same panel.
Now that you have completed this module, let's review what you have learned.
316
Feb-10
Using a Multiplexer in a
Segment
Module Overview
This chapter focuses on the usage of multiplexers in fieldbus segments.
Multiplexers reduces the cost of installing hazardous area cabling, saves
installation time and space. For multiplexers a new tag type AT_MUX is available
and for multiplexer terminal strips a new tag type AT_MUX_TSTRIP.
Module Prerequisites
Module Objectives
After completing this module, you will be able to:
Feb-10
Create a new power conditioner in the existing card panel for new segment.
317
Copyright 2010 Bentley Systems, Incorporated
13 Click No.
Note: The tag code is for this segment only, not for all tags.
14 Click Next.
318
Feb-10
16 Click Next.
17 Type PCS1NWT7 in the New Instrument Fieldbus Segment - Step3 field.
18 Click OK.
Feb-10
319
20 Click OK.
I/O
BUS_AI
Description
PRESSURE TRANSMITTER
Manufacturer
ACME
MODEL
ACPT1
320
Feb-10
I/O
BUS_AI
Service
Tank 23 Pressure
Segment Symbol
DCS Keyword
BBB
Memory Address
1001001
Data Type
AAA
Set Point
2222
Characterization
CCC
6 Click OK.
To close the Add Terminal Set dialog.
7 Click OK.
Feb-10
321
11 Click OK.
12 Select the Instr tab.
13 Create two new instrument tags using tag type AT_INST_, tag code A-T-N
and having Tstrips and Spurs.
14 The tag numbers and properties are shown below:
Tag No
100-LV-31291
100-LV-31292
I/O
BUS_AO
BUS_AO
Description
LEVEL VALVE
LEVEL VALVE
Manufacturer
ACME
ACME
322
Feb-10
Tag No
100-LV-31291
100-LV-31292
Model
ACLV1
ACLV1
Service
Tank 23 LEVEL
Tank 24 LEVEL
Segment Symbol
DCS Keyword
BBB
BBB
Memory Address
1001001
1001001
Data type
AAA
AAA
Set Point
2222
2222
Characterization
CCC
CCC
Tag No
100-DT-31291
100-LIT-31291
I/O
BUS_AI
BUS_AI
Description
DENSITY TRANSMITTER
LEVEL TRANSMITTER
Manufacturer
ACME
ACME
Model
ACDT1
ACLT1
Service
Fluid Density
Tank 23 LEVEL
Segment Symbol
DCS Keyword
BBB
BBB
Memory Address
1001001
1001001
Data type
AAA
AAA
Set Point
2222
2222
Characterization
CCC
CCC
Feb-10
323
2 Click OK.
324
Feb-10
Note: Segment Symbol for MUX 4 Port Block.dwg is part of the sample
dataset.
Feb-10
325
8 Click OK.
To close the Add Terminal Set dialog.
326
Feb-10
4 Save connections.
5 Close Connect Destination Cores dialog.
6 Connect 100-LV-31291 on TSet 2 of 100-MUX-31291.
7 Connect 100-LV-31292 on TSet 3 of 100-MUX-31291.
Feb-10
327
10 Save connections.
11 Close Connect Destination Cores dialog.
Note: The multiplexer cable has not been terminated on MUX terminal strip
328
Feb-10
15 Save connections.
16 Close Connect Destination Cores dialog.
Feb-10
329
5 Type Single Brick with Internal terminator and MUX in the Panel Remarks
field.
6 Click Next.
7 Click Next.
330
Feb-10
10 Click OK.
11 Click Finish.
The New Fieldbus Panel dialog opens.
12 Click Save.
Feb-10
331
Note: When you save the New Fieldbus Panel dialog, the title will change to
Description
Tstrip/Brick Properties
Internal Terminator?
Yes
Terminal State
On
Fixed
Manufacturer
RELCOM
MODEL
F215
Mounting Requirements
332
Feb-10
Description
Tstrip/Brick Properties
Wiring Capacity
CCC
Case Material
Lexan Ploycarbonate
7 Click Design.
Note: This configuration will design a 12 Port brick with an extra TSet for an
Incoming trunk and an extra TSet for an Outgoing trunk making total of
14 Terminal sets.
10 Click OK.
To close the Add Terminal Set dialog.
11 Click OK.
Feb-10
333
12 Change labels for TSet 13 and Tset 14 and the terminal numbers as well,
as shown below:
13 Click OK.
To save the Brick design and return to Edit Fieldbus Panel dialog
14 While in the Tstrip/Brick tab click New from Tags group box.
15 Create a new Tstrip with Tag type AT_TSTRIP and Tag Code T-N.
16 Clear the Create Cable checkbox.
17 Click OK.
18 Type TS-1 in the New Tstrip Number field on New TSTRIP dialog.
19 Click OK.
20 Select Fixed from the Connection Position Type list.
334
Feb-10
23 Click OK.
To return to Edit Fieldbus Panel dialog.
Feb-10
335
336
Feb-10
Note: The internal panel cable Brick-007 will connect between Brick-007 and
Feb-10
337
338
Feb-10
7 Save connections.
8 Click Swap Source\Destination.
10 Save connections.
Feb-10
339
9 Click OK.
10 Select the Cable Properties as shown below:
11 Click Design.
340
Feb-10
13 Click OK.
Feb-10
341
24 Save connections.
25 Close Connect Destination Cores dialog.
342
Feb-10
7 Click OK.
Feb-10
343
11 Click Design.
To design new deice as shown below:
344
Feb-10
12 Click Connect.
13 Select OK.
To save and close Device Builder dialog and return to the Edit Card Panel
dialog
14 Select the Cable tab.
18 Click OK.
19 Type PC2 in New CABLE field.
20 Click OK.
21 Select BUS in the Cable Application list.
Feb-10
345
23 Click Design.
24 Select BELDEN from the Cable Manufacturer list.
25 Select TRUNK CABLE from the Cable Type list.
26 Click Ok.
27 Click Save.
28 Close Edit Card Panel dialog.
29 On the Layout right-click on the Card Panel 100-PCS-100.
30 Select Connect Internal Panel Cables.
31 Connect PC2 right terminals with cable as shown.
346
Feb-10
35 Save connections.
Feb-10
347
Connecting Components
Connecting Components
348
Feb-10
Connecting Components
Feb-10
349
Connecting Components
12 Save connections.
13 Close Connect Destination Cores dialog.
350
Feb-10
Connecting Components
3 Save connections.
4 Close Connect Destination Cores dialog.
Feb-10
351
Connecting Components
6 Save connections.
7 Close Connect Destination Cores dialog.
352
Feb-10
Connecting Components
2 Save connections.
Feb-10
353
Connecting Components
354
Feb-10
Connecting Components
7 Click OK.
To save and close the Properties for Document dialog.
8 Select Regenerate\Save Document.
To generate the document
Feb-10
355
Module Review
Module Review
Questions
1 What is the advantage of using Multiplexers?
2 What new tag types were created for Multiplexers?
Answers
1 Multiplexers reduces the cost of installing hazardous area cabling, saves
installation time and space.
2 For multiplexers a new tag type AT_MUX, and for multiplexer terminal
strips a new tag type AT_MUX_TSTRIP.
Now that you have completed this module, lets measure what you have learned.
356
Feb-10
Course Summary
You have now completed the FOUNDATION Fieldbus Fundamental course.
Course Summary
Feb-10
357
Copyright 2009 Bentley Systems, Incorporated
Course Summary
Course Review
Course Review
Questions
1 What components are used to build a FOUNDATION Fieldbus segment?
2 What is a splice?
3 What is a trunk?
Now that you have completed this course, lets measure what you have learned.
4 What is a spur?
5 What factors come into play when building a network spanned over a
large distance with baud rates of 500kbps, 250kbps, and 125kbps?
6 What is the difference between a Segment and a Network?
Course Summary
358
Feb-10
Course Review
Answers
1 FOUNDATION Fieldbus card, power conditioner (if not already built into
the card internally), marshalling rack, junction box Tstrip, Brick(s)/
termination blocks/megablocks, repeaters, instruments, spurs, trunks,
terminators (internal/external).
2 A splice is a cable/pair of wires that taps off a Fieldbus device (brick) or the
trunk itself and is less than 1 meter in length.
Feb-10
359
Course Summary
Course Review
Course Summary
360
Feb-10
V8i (SELECTseries1)
TRN010340-1/0002
AccuDraw, Bentley, the B Bentley logo, MDL, MicroStation and SmartLine are
registered trademarks; PopSet and Raster Manager are trademarks; Bentley SELECT is a
service mark of Bentley Systems, Incorporated or Bentley Software, Inc.
AutoCAD is a registered trademark of Autodesk, Inc.
All ther brands and product names are the trademarks of their respective owners.
Patents
United States Patent Nos. 5,8.15,415 and 5,784,068 and 6,199,125.
Copyrights
2000-2009 Bentley Systems, Incorporated.
MicroStation 1998 Bentley Systems, Incorporated.
All rights reserved.
Trademarks
Datasheets Fundamentals
362
Feb-10
Course Overview
Course Description
Datasheets let you access and manage dynamically-passed process and
instrumentation data. The Datasheet module utilizes Microsoft Excel as its native
format for data storage and customization. In this course, you will learn how to
create, print, and revise a datasheet. You will also learn how to modify a linked
datasheet field.
Target Audience
This course is recommended for the following audience(s):
Prerequisites
Feb-10
363
Copyright 2009 Bentley Systems, Incorporated
Course Overview
Course Objectives
Course Objectives
Modules Included
The following modules are included in this course:
Mapped Datasheets
Bulk Datasheets
System Requirements
You must have a CD drive or Internet access for product installation. The
following prerequisites are required to run the modules included in Datasheets
V8i Edition:
Course Overview
Processor:
Operating
System:
Internet:
Memory:
Hard Disk:
364
Feb-10
System Requirements
Input Device:
Output Device:
Video Graphics
Card:
Document
Management:
Cad Engines:
Microsoft Office:
Databases
Supported:
Feb-10
ORACLE 81, 9i
365
Course Overview
Introductory Knowledge
Introductory Knowledge
Questions
1 From which applications can you launch Datasheets?
2 Are datasheets limited to instruments only?
Answers
1 Datasheets can be launched from within the Data Manager or
Instrumentation & Wiring applications.
2 No, pumps and motors can have datasheets as well.
Before you begin this module, let's define what you already know.
Course Overview
366
Feb-10
database format. However, Instrumentation & Wiring does not support the
Access database format for multi-user projects. Bentley recommends that no
less than the MSDE database format be used. SQL and Oracle databases
provide the most stable environments for building projects to be used by
multi-users.
Therefore, in order for this option to be available in the File menu, you
must select something at the primary root level of the navigation tree.
8 Select C:\Bentley Training Project.
9 Click OK.
Feb-10
367
Course Overview
Note: The project root folder, C:\ Bentley Training Project now appears in the
Course Overview
368
Feb-10
Module Overview
In this module you will create a datasheet for a flow element.
Module Prerequisites
Module Objectives
After completing this module, you will be able to:
Feb-10
Create a datasheet.
Modify a datasheet.
Revise a datasheet.
369
Create a Datasheet
Create a Datasheet
2 Select 100-TT-202.
A datasheet is created for this tag number.
3 Select Applications > Data Sheet Editor.
The Datasheet wizard displays.
370
Feb-10
Create a Datasheet
Feb-10
371
Create a Datasheet
Note: To assign a custom datasheet file name, clear the Automatically create
File Name from Document Number check box and replace the name in
the File Name field.
12 Select 100-TT-202.
13 Select Add Tag Number arrow.
The tag number is allocated.
14 Click Next.
372
Feb-10
Create a Datasheet
16 Click Finish.
Linking fields to datasheets provides the best way to keep data current on the
datasheet. It also allows update of the database should the datasheet be
imported into the project.
1 Select 100-TT-202.
2 Launch Datasheets.
3 Select File > Open.
The datasheet file opens.
4 Select Show Database Fields.
5 Expand the INSTR node.
6 Place your cursor in cell Y13.
7 Select MANUFACTR from the Database Fields list.
Feb-10
373
Create a Datasheet
9 Click OK.
374
Feb-10
Modifying a Datasheet
Modifying a Datasheet
In this module you will modify a linked field, and then print the datasheets.
Class Date: 18-Jul-2011
Notice the discrepancy between the Database Value and Document Value
items. The arrow between these two fields points to the value that will be
updated.
6 Ensure that the arrow is pointing toward the Database Value fied.
7 Click OK.
The database is reconciled and the dialog closed.
Feb-10
375
Modifying a Datasheet
376
Feb-10
Revising a Datasheet
Revising a Datasheet
6 Click OK.
The Datasheet Revisions dialog closes and the revision marks assigned to
the current datasheet are saved.
7 Select File > Open.
Feb-10
377
Revising a Datasheet
378
Feb-10
Module Review
Module Review
Now that you have completed this module, let's review what you have learned.
Questions:
1 What is the default Microsoft application used for Datasheets?
2 If you do not want the datasheet file name to be the same as the
document name, what must you do?
Answers:
1 Microsoft Excel
2 You must disable the Automatically create File Name from Document
Number check box.
Feb-10
379
Module Review
380
Feb-10
Mapped Datasheets
Module Overview
The new Datasheets engine allows users to store every field on a datasheet to the
project database. The engine employs an object-based table that relates
properties to a datasheet template, automatically transferring those properties
to any component assigned to the template. These properties can be viewed,
imported and exported outside of the datasheets environment via the Data
Manager or I&W interface.
Module Prerequisites
Module Objectives
After completing this module, you will be able to:
Feb-10
381
Copyright 2009 Bentley Systems, Incorporated
Mapped Datasheets
Mapped Datasheets
Mapped Datasheets
1 Select Programs > Bentley > Plant V8i > Project Tools > Project
Administrator from the Windows Start menu.
Mapped Datasheets
382
Feb-10
Mapped Datasheets
6 Click Add.
Feb-10
383
Mapped Datasheets
Mapped Datasheets
10 Click Open.
11 Select F1_Flow_Element_Pressure_Type.xls.
12 Click Open.
The datasheet is now imported into the project and shown in the righthand side of the Project Administrator dialog.
13 Type Flow_Orifice into the Description field.
14 Click Save.
This datasheet is now available for tags with the tag type AT_INST_ORF.
15 Select Datasheets from the navigation tree.
Mapped Datasheets
384
Feb-10
Mapped Datasheets
There will be a few cells on the datasheet which may not be mapped. The
following procedure will step you through adding a new property to the
datasheet.
1 Select Edit Datasheets.
5 Click Add.
Feb-10
385
Mapped Datasheets
Mapped Datasheets
8 Click Save.
9 Exit Project Administrator.
Mapped Datasheets
386
Feb-10
Mapped Datasheets
14 Click Next.
15 Select F1_Flow_Element_Pressure_Type.
16 Click Next.
17 Type 100TE100 in the Document Number field.
18 Click Next.
19 Add 100-TE-100 to the allocated tags.
20 Click Next.
21 Click Finish.
The Resolve Differences dialog opens.
22 Click OK.
Feb-10
387
Mapped Datasheets
Mapped Datasheets
6 Click Save.
Mapped Datasheets
388
Feb-10
Mapped Datasheets
9 Click View.
Feb-10
389
Mapped Datasheets
Module Review
Module Review
Questions
1 Why did you select the tag type AT_ISNT_ORF before importing the
datasheet?
2 What is extended data?
Answers
1 The tag type was selected so that when you are in the Datasheets
application and a tag has the tag type of AT_INST_ORF, the software will
make the imported sheet available to you.
2 Extended data can be imported/exported to or from a datasheet and
stored in the project databases.
Now that you have completed this module, let's measure what you have learned.
Mapped Datasheets
390
Feb-10
Module Overview
This module introduces you to Datasheet's Bulk Datasheet Builder utility, which
creates multiple datasheets at a time.
Module Prerequisites
Module Objectives
After completing this module, you will be able to:
Bulk Datasheets
Feb-10
391
Copyright 2009 Bentley Systems, Incorporated
Bulk Datasheets
Bulk Datasheets
392
Feb-10
Note: The datasheets are created and named with the tag number then the
Feb-10
393
Bulk Datasheets
Bulk Datasheets
394
Feb-10
The Batch Print Module closes and returns you to Bentley Datasheets.
Feb-10
395
Bulk Datasheets
Module Review
Module Review
Questions
1 Why was AT_INST_ selected from the Tag Type field?
2 Could you have changed the location of the datasheet files?
Answers
1 AT_INST_ was selected from the Tag Type field to filter the list of
instruments and make them more manageable.
2 Yes, in the Assign Datasheet Names dialog, a location other than the
project could have been selected.
Now that you have completed this module, let's measure what you have learned.
Bulk Datasheets
396
Feb-10
Course Summary
You have completed the Datasheet Fundamentals course.
Course Summary
Feb-10
397
Copyright 2009 Bentley Systems, Incorporated
Course Summary
Course Review
Course Review
Questions
1 Is Datasheets a stand-alone application?
2 Can only one datasheet document be printed at one time?
3 Can data be imported into the database from the datasheet?
4 How does the software tell if there is a change in the database or the
datasheet document?
5 Do you have to create datasheets one tag number at a time?
Answers
1 No, Datasheets is an application found within Data Manager and
Instrumentation & Wiring.
2 No, datasheets can be printed in batches.
3 Yes, a mapped datasheet can be imported into a project and its data will
populate the database upon closure of the datasheet.
4 The software compares the data and asks user to select the correct data.
Now that you have completed this course, lets measure what you have learned.
Course Summary
398
Feb-10
V8i (SELECTseries1)
TRN010910-1/0002
AccuDraw, Bentley, the B Bentley logo, MDL, MicroStation and SmartLine are
registered trademarks; PopSet and Raster Manager are trademarks; Bentley SELECT is a
service mark of Bentley Systems, Incorporated or Bentley Software, Inc.
AutoCAD is a registered trademark of Autodesk, Inc.
All their brands and product names are the trademarks of their respective owners.
Patents
United States Patent Nos. 5,8.15,415 and 5,784,068 and 6,199,125.
Copyrights
2000-2009 Bentley Systems, Incorporated.
MicroStation 1998 Bentley Systems, Incorporated.
All rights reserved.
Trademarks
Hookups Fundamentals
400
Feb-10
Course Overview
Course Description
Hookups enable you to access and manage dynamically-passed process and
instrumentation data. The Hookups application utilizes Microsoft Excel as its
native format for data storage and customization. In this course you will create,
print, and revise a hookup, as well as modifying a linked hookup field.
Target Audience
This course is recommended for the following audience(s):
Prerequisites
Course Objectives
After completing this course, you will be able to:
Feb-10
Create a hookup.
Revise a hookup.
Print a hookup.
401
Copyright 2009 Bentley Systems, Incorporated
Course Overview
Modules Included
Modules Included
The following module is included in this course:
System Requirements
You must have a CD drive or Internet access for product installation. The
following prerequisites are required to run the modules included in
Instrumentation & Wiring V8i Edition:
Course Overview
Processor:
Operating
System:
Internet:
Memory:
Hard Disk:
Input Device:
Output Device:
Video Graphics
Card:
Document
Management:
402
Feb-10
System Requirements
Cad Engines:
Microsoft Office:
Databases
Supported:
ORACLE 81, 9i
Feb-10
403
Course Overview
Introductory Knowledge
Introductory Knowledge
Questions
1 What is a hookup?
2 What is a Bill of Material?
Answers
1 A hookup is a document showing the detailed connection of the
instrument as well as a list of all parts required to install.
2 A Bill of Material is an Excel document containing a summation of all
parts.
Before you begin this module, let's define what you already know.
Course Overview
404
Feb-10
database format. However, Instrumentation & Wiring does not support the
Access database format for multi-user projects. Bentley recommends that no
less than the MSDE database format be used. SQL and Oracle databases
provide the most stable environments for building projects to be used by
multi-users.
Therefore, in order for this option to be available in the File menu, you
must select something at the primary root level of the navigation tree.
8 Select C:\Bentley Training Project.
9 Click OK.
Feb-10
405
Course Overview
Note: The project root folder, C:\ Bentley Training Project now appears in the
Course Overview
406
Feb-10
Module Overview
In this module you will learn to create a single and multi-tag hookup and create a
Bill of Material for the multi-tag hookup. Finally, you will modify and revise the
hookup.
Module Prerequisites
Module Objectives
Feb-10
Modify a hookup.
Revise a hookup.
407
Copyright 2009 Bentley Systems, Incorporated
Creating a Hookup
Creating a Hookup
408
Feb-10
Creating a Hookup
8 Click Next.
Note: There are a limited number of hookups provided with the software.
10 Click Next.
11 Add the tag 200-FT-300 to the Allocated Tags list.
Feb-10
409
Creating a Hookup
12 Click Next.
410
Feb-10
Creating a Hookup
Feb-10
411
Creating a Hookup
7 Click Next.
9 Click Next.
10 Add the tags 100-TT-100 and 100-TT-202 to the Allocated Tags list.
11 Click Next.
12 Ensure that Open document in Excel is enabled.
412
Feb-10
Creating a Hookup
13 Click Finish.
Feb-10
413
5 Click OK.
Two hookups were selected without error.
414
Feb-10
6 Click OK.
9 Click Yes.
Feb-10
415
416
Feb-10
Modifying a Hookup
Modifying a Hookup
There are several ways to manipulate the data on a hookup. You can change data,
add new fields and allocate additional tags to an existing hookup. The Hookup
Editor allows you to find a hookup by either the document name or by the tags
that are allocated to it.
Feb-10
417
Modifying a Hookup
Note: This dialog indicates that there is a difference between the Database
and the Document. At present the update will be to the document with
the values that are in the database. You will need to change the
direction of the arrows to update the database with the values that
were entered on the hookup.
7 Click OK.
8 Select Return to Instrumentation Wiring.
9 Select Refresh.
10 Scroll over to the Manufacturer field. Note that the value of Rosemont has
been added.
418
Feb-10
Modifying a Hookup
11 Click OK.
12 Click on the field and note that the field name has changed to _SETPOINT.
13 Type 15PSIG in the field.
14 Click Save and Exit.
15 Click on the arrows to change the direction of the arrows to point to the
Database Value field.
16 Click OK.
17 Select Return to Instrumentation Wiring.
18 Select Refresh.
Feb-10
419
Modifying a Hookup
19 Scroll over to the SetPoint field and note the value of 15PSIG has been
added.
5 Select 200FT3001.XLS.
6 Click OK.
The Find Tag dialog is returned.
7 Click OK.
The hookup 100FT300.xls is now the active hookup.
8 Select Allocate next to the Allocate Tag Number field.
9 Select AT_INST_ in the Tags with Tag Type Like list.
420
Feb-10
Modifying a Hookup
10 Click Add.
The available tag 200-FT-300 is added to the Allocated Tags list.
11 Click OK.
Class Date: 18-Jul-2011
Feb-10
421
Revise a Hookup
Revise a Hookup
Exercise 1: Add a Revision Note to a Hookup
1 Select 100-TT-100 from the Instrument List.
2 Select Hookup Editor.
3 Select Revise in the Latest Revision Number group box.
4 Fill out the appropriate fields as shown below.
Note: Use lists where applicable.
5 Click OK.
The Hookup Editor returns.
6 Select File > Open.
422
Feb-10
Revise a Hookup
Feb-10
423
Module Review
Module Review
Questions:
1 How do you add a revision to a hookup?
2 When does the Resolve Differences dialog appear?
Answers:
1 Select Revise on the Hookup Editor dialog to launch the Hookup Revision
dialog.
2 The Resolve Differences dialog appears when there is a conflict between
the database and the hookup document.
Now that you have completed this module, let's review what you have learned.
424
Feb-10
Course Summary
You have completed the Hookups Fundamentals course.
Course Summary
Feb-10
425
Copyright 2009 Bentley Systems, Incorporated
Course Summary
Course Review
Course Review
Questions
1 Can you allocate additional tags to a hookup if the installation
configuration is the same?
2 Can you find a hookup by tag number instead of document number?
3 Do you have to update the document with the information from the
database?
Answers
1 Yes, using the Allocate Tags option.
2 Yes, you can find a hookup document by its tag number.
3 It would depend on which information is the most current. If the
document has more current information, do not update the data when
opening the data. You would update the database when closing the
document.
Now that you have completed this course, lets measure what you have learned.
Course Summary
426
Feb-10