Beruflich Dokumente
Kultur Dokumente
Client Consultant
PROGER S.p.A.
Contractor
Contractor Consultant
Project Name
) KAP - 4 (
PROJECT OF CUSTODIAN OF THE TWO HOLY MOSQUES,
KING ABDULLAH BEN ABDUL AZIZ FOR DEVELOPING
THE SECURITY LOCATIONS OF MINISTRY OF INTERIOR
FOURTH STAGE-DIRECTORATES AND
HEADQUARTERS OF
Document Title
FIRE PROTECTION CALCULATION REPORT FOR
MAIN BUILDING - PART A
PREPARED BY
CHECKED BY
APPROVED BY
DATE
R.H
A.S
A.S
Jun-14
Transmittal Number
KAP4-REP-119-MBXX-FP-0001
Document Number
KAP4-REP-DD-119-MBXX-FP-0001-A
1 of 50
2 of 50
The following codes, standards and guidelines were followed for the design of the fire
suppression system.
Design codes
IBC
International Building Code 2012
SBC801 The Saudi Building Code Fire protection Requirements 2007
Standards
NFPA
Standards
ASTM
FM
UL
3 of 50
Building Code
Building Name
MBXX(PA)
Occupancy hazard
classifications
BUSINESS/ ASSEMBLY
Light & Ordinary
Floors Area:
Building
Code
MBXX (PA)
Ground
Floor
(m2)
3065
First
Floor
(m2)
2850
Second
Floor
(m2)
2770
Third
Floor
(m2)
575
Total
(m2)
9260
4 of 50
Wet-Type, Class II Standpipe System: Includes NPS 1.5 inch (DN 40) hose
stations. Has open water-supply valve with pressure maintained and is
capable of supplying water demand.
Manual Wet-Type, Class I Standpipe System for Landing Valve: Includes NPS
2-1/2 inch (DN 65) hose connections. Has small water supply to maintain
water in standpipes.
Portable dry powder fire extinguisher (4.5 kg capacity), carbon dioxide (4.5 kg)
or as calculated according to space area will be provided as shown on
drawings including store rooms, electric rooms, laboratory rooms, mechanical
rooms,.etc. The layout and location will be provided in accordance with
NFPA 10 requirements.
5 of 50
Standard piping system components working pressure: Listed for at least 175
psi (1200 Kpa).
o Minimum residual pressure at each hose-connection outlet is the following:
NPS 2 1/2 inch (DN 65) hose connections: 100 psi (690 Kpa).
NPS 1 1/2 inch (DN 40) hose connections: 65 psi (450 Kpa).
6 of 50
1.5 EQUIPMENT
The following equipment lists contains suggested models of appropriate fire services
equipment that may be used.
1.5.1 EXTINGUISHERS
Extinguishers
Device
Type
Fire Extinguisher
Fire Extinguisher
7 of 50
Type
Land Valve
Land Valve
Hose
FE-2
Hose Cabinet
Temp. Rating
Type
Sprinkler Head
Sprinkler Head
MATERIALS
8 of 50
1.6 PHILOSOPHY
Our work to verify the pump capacity and head are sufficient to supply the site and
meet the minimum requirement by NFPA or not.
Inside Hose stream allow will be 100 gpm (as per item Table
11.2.3.1.2 Hose Stream Allowance and Water Supply Duration
Requirements for Hydraulically Calculated Systems page 13-123,
NFPA 13, 2013 Edition).
Determine the remotest operation area which located in the Roof floor
(mechanical room) of work shop building.
Minimum Desired Density will be 0.1 gpm/ft (as per item 11.2.3 page
13-122 NFPA 13-2013 Edition).
Max area per sprinkler will be 130 ft (as per Table 8.6.2.2.1(a)
Protection Areas and Maximum Spacing of Standard Pendent and
Upright Spray Sprinklers for Ordinary Hazard page 13-35 NFPA13,
2013Edition).
9 of 50
Design area will be 1500 ft (as per item 11.2.3 page 13-122
NFPA 13-2013 Edition, Find attached file).
Residual Pressure for Class I will be 100 psi (6.9 par) (as per item
7.8.1 Minimum Design Pressure for Hydraulically Designed Systems
page 14-19 NFPA 14, 2013 Edition).
Flow will be 250 gpm (as per item 7.10.1.2 Hydraulic Calculation
Requirements page 14-20 NFPA 14, 2013 Edition).
10 of 50
11 of 50
= V* CF * C Alt
= Agent quantity required (kg)
CF
C Alt
Required
Qty.of
Qty.of
NOVEC
NOVEC
Total
Volume
(Kg.)
Adequation of
Calc.
protected Room Hight
Of
Mentioned NOVEC Qty (one
(Kg.)
area
(m)
Protected
in Design
duty & one
(one
(m2)
Area (m)
(one duty
standby)
duty &
& one
one
standby)
standby)
Adequate But
8.6
4
34.4
24
63.5
Over Sizing
Adequate But
8.6
4
34.4
24
63.5
Over Sizing
Adequate But
10
4
40
28
63.5
Over Sizing
Adequate But
7.8
4
31.2
21
63.5
Over Sizing
Adequate But
7.6
4
30.4
21
63.5
Over Sizing
Adequate But
28
4
112
77
177
Over Sizing
Adequate But
9.5
4
38
26
63.5
Over Sizing
9.36
37.44
26
40.8
Adequate
12.9
51.6
36
63.5
15.2
60.8
42
127
18
72
50
New Room
18
72
50
127
13
52
36
63.5
15.2
60.8
42
127
17.6
70.4
49
63.5
Adequate
9.4
37.6
26
40.8
Adequate
9.5
38
26
40.8
Adequate
Adequate But
Over Sizing
Adequate But
Over Sizing
Adequate But
Over Sizing
Adequate But
Over Sizing
Adequate But
Over Sizing
12 of 50
13 of 50
for
MINISTRY OF INTERIOR
Prepared By:
R.Hamed
AL-ARRAB CONTRACTING COMPANY (ACC)
June, 2014
14 of 50
Date:
Approving Agency:
Phone:
City, State Zip Code:
MINISTRY OF INTERIOR
AL-ARRAB CONTRACTING
COMPANY (ACC)
Representative:
City And State:
Building Owner:
Phone at Building:
City, State Zip Code:
Project Data
Description Of Hazard:
Design Area Of Water Application:
Default Sprinkler K-Factor:
Inside Hose Stream Allowance:
In Rack Sprinkler Allowance:
Ordinary 1
1500
5.80
100.00
0.00
ft
K
gpm
gpm
Sprinkler Specifications
Make:
Size:
Model:
Temperature Rating:
0 F
Date Of Test:
0 ft
0.00 gpm
392.77 gpm
Static Pressure:
Test Residual Pressure:
Calculated Inflow Residual Pressure:
0.00 psi
0.00 psi
97.30 psi
Demand
15.00 psi
33
32
12
0.00 gpm/ft
0
0
15 of 50
Sprinkler
KFactor (K)
Branch Len.
(ft)
Pressure
Estimate (psi)
Branch Stnd
Fittings
Non-Sprinkler
Flow (gpm)
Branch Sprk
KFactor (K)
Sprinkler
----
---0.000
5.80
0.0
15.34
----
59.38
0.0
0.00
0.00
20
Sprinkler
----
---0.000
5.80
0.0
16.62
----
59.38
0.0
0.00
0.00
30
No Discharge
----
---0.000
N/A
0.0
17.34
----
60.04
0.0
0.00
0.00
40
Sprinkler
----
---0.000
5.80
0.0
15.00
----
59.38
0.0
0.00
0.00
50
Sprinkler
----
---0.000
5.80
0.0
16.35
----
59.38
0.0
0.00
0.00
60
No Discharge
----
---0.000
N/A
0.0
17.05
----
60.04
0.0
0.00
0.00
70
No Discharge
----
---0.000
N/A
0.0
23.66
----
60.04
0.0
0.00
0.00
80
No Discharge
----
---0.000
N/A
0.0
26.54
----
59.06
0.0
0.00
0.00
90
Sprinkler
----
---0.000
5.80
0.0
16.35
----
59.38
0.0
0.00
0.00
100
Sprinkler
----
---0.000
5.80
0.0
17.75
----
59.38
0.0
0.00
0.00
110
No Discharge
----
---0.000
N/A
0.0
18.53
----
60.04
0.0
0.00
0.00
120
Sprinkler
----
---0.000
5.80
0.0
16.03
----
59.38
0.0
0.00
0.00
130
Sprinkler
----
---0.000
5.80
0.0
17.46
----
59.38
0.0
0.00
0.00
140
No Discharge
----
---0.000
N/A
0.0
18.22
----
60.04
0.0
0.00
0.00
150
No Discharge
----
---0.000
N/A
0.0
25.24
----
60.04
0.0
0.00
0.00
160
No Discharge
----
---0.000
N/A
0.0
28.28
----
59.06
0.0
0.00
0.00
170
Sprinkler
----
---0.000
5.80
0.0
19.99
----
59.38
0.0
0.00
16 of 50
0.00
Node
No.
Node Description
Branch Description
10
Sprinkler
KFactor (K)
Branch Len.
(ft)
Pressure
Estimate (psi)
Branch Stnd
Fittings
Non-Sprinkler
Flow (gpm)
Branch Sprk
KFactor (K)
Sprinkler
----
---0.000
5.80
0.0
21.68
----
59.38
0.0
0.00
0.00
190
No Discharge
----
---0.000
N/A
0.0
22.68
----
60.04
0.0
0.00
0.00
200
Sprinkler
----
---0.000
5.80
0.0
19.43
----
59.38
0.0
0.00
0.00
210
Sprinkler
----
---0.000
5.80
0.0
21.14
----
59.38
0.0
0.00
0.00
220
No Discharge
----
---0.000
N/A
0.0
22.11
----
60.04
0.0
0.00
0.00
230
No Discharge
----
---0.000
N/A
0.0
30.50
----
60.04
0.0
0.00
0.00
240
No Discharge
----
---0.000
N/A
0.0
34.06
----
59.06
0.0
0.00
0.00
250
No Discharge
----
---0.000
N/A
0.0
56.23
----
59.06
0.0
0.00
0.00
260
No Discharge
----
---0.000
N/A
0.0
64.29
----
59.06
0.0
0.00
0.00
270
Non-Sprinkler
----
---0.000
N/A
0.0
67.69
----
50.85
0.0
50.00
0.00
280
No Discharge
----
---0.000
N/A
0.0
66.01
----
59.06
0.0
0.00
0.00
290
No Discharge
----
---0.000
N/A
0.0
74.00
----
44.29
0.0
0.00
0.00
300
Non-Sprinkler
----
---0.000
N/A
0.0
73.03
----
36.09
0.0
50.00
0.00
310
No Discharge
----
---0.000
N/A
0.0
76.53
----
44.29
0.0
0.00
0.00
320
No Discharge
----
---0.000
N/A
0.0
96.52
----
0.00
0.0
0.00
0.00
330
No Discharge
----
---0.000
N/A
0.0
97.30
----
0.00
0.0
0.00
0.00
Node
No.
Node Description
Branch Description
180
17 of 50
Type
Group
Fitting
Data
Nominal
Length
(feet)
Fitting
Length
(feet)
1.000
11.81
2.00
13.81
120
30
1.000
0.66
5.00
5.66
120
30
70
1.000
5.25
5.00
10.25
120
40
60
1.000
12.47
2.00
14.47
120
50
60
1.000
0.66
5.00
5.66
120
60
70
1.000
5.91
5.00
10.91
120
70
80
1.500
0.98
8.00
8.98
120
80
160
2.000
11.48
10.00
21.48
120
90
110
1.000
12.14
2.00
14.14
120
100
110
1.000
0.66
5.00
5.66
120
110
150
1.000
5.25
5.00
10.25
120
120
140
1.000
12.47
2.00
14.47
120
130
140
1.000
0.66
5.00
5.66
120
140
150
1.000
5.91
5.00
10.91
120
150
160
1.500
0.98
8.00
8.98
120
160
240
2.000
9.19
10.00
19.19
120
170
190
1.000
12.14
2.00
14.14
120
180
190
1.000
0.66
5.00
5.66
120
190
230
1.000
4.92
5.00
9.92
120
200
220
1.000
12.47
2.00
14.47
120
210
220
1.000
0.66
5.00
5.66
120
220
230
1.000
5.91
5.00
10.91
120
230
240
1.500
0.98
8.00
8.98
120
240
250
2.500
E3T
34.78
42.00
76.78
120
250
260
3.000
3T
35.43
45.00
80.43
120
260
280
4.000
T2GC
18.37
46.00
64.37
18 of 120
50
Beg.
Node
End.
Node
Pipe Description
10
30
20
Total
CFactor
Length (gpm/inch(feet)
psi)
Type
Group
Fitting
Data
Nominal
Length
(feet)
Fitting
Length
(feet)
1.500
ETG
8.20
13.00
21.20
120
290
4.000
ET
14.76
30.00
44.76
120
290
310
4.000
50.85
20.00
70.85
120
300
310
1.500
3ETG
59.06
21.00
80.06
120
310
320
6.000
E2T
55.77
74.00
129.77
120
320
330
6.000
ET3GC
39.37
85.00
124.37
120
Beg.
Node
End.
Node
Pipe Description
270
280
280
Total
CFactor
Length (gpm/inch(feet)
psi)
19 of 50
Pipe
Type
Group
Pipe
Flow Rate
(gpm)
Sprinkler Flow
At Beg. Node
(gpm)
Non-Sprinkler Flow
Out (+)
In (-)
(gpm)
(gpm)
Beg. Node
Residual
Pressure (psi)
Imbalance
Flow At Beg.
Node (gpm)
10
30
-22.72
22.72
0.00
0.00
15.34
20
30
-23.64
23.64
0.00
0.00
16.62
0.00176
30
30
30
10
20
70
0
0
0
22.72
23.64
-46.36
0.00
0.00
0.00
17.34
-0.00001
40
60
-22.46
22.46
0.00
0.00
15.00
0.00211
50
60
-23.45
23.45
0.00
0.00
16.35
0.00225
60
60
60
40
50
70
0
0
0
22.46
23.45
-45.91
0.00
0.00
0.00
17.05
-0.00190
70
70
70
30
60
80
0
0
0
46.36
45.91
-92.27
0.00
0.00
0.00
23.66
-0.00003
80
80
70
160
0
0
92.27
-92.27
0.00
0.00
0.00
26.54
0.00000
90
110
-23.45
23.45
0.00
0.00
16.35
0.00138
100
110
-24.43
24.44
0.00
0.00
17.75
0.00191
110
110
110
90
100
150
0
0
0
23.45
24.43
-47.88
0.00
0.00
0.00
18.53
-0.00001
120
140
-23.22
23.22
0.00
0.00
16.03
0.00132
130
140
-24.23
24.23
0.00
0.00
17.46
0.00185
140
140
140
120
130
150
0
0
0
23.22
24.23
-47.45
0.00
0.00
0.00
18.22
-0.00001
150
150
150
110
140
160
0
0
0
47.88
47.45
-95.33
0.00
0.00
0.00
25.24
-0.00003
160
160
160
80
150
240
0
0
0
92.27
95.33
-187.60
0.00
0.00
0.00
28.28
-0.00003
170
190
-25.93
25.93
0.00
0.00
19.99
0.00188
180
190
-27.00
27.01
0.00
0.00
21.68
0.00254
20 of 50
Pipe
Type
Group
0
0
0
Pipe
Flow Rate
(gpm)
25.93
27.00
-52.93
Sprinkler Flow
At Beg. Node
(gpm)
0.00
Non-Sprinkler Flow
Out (+)
In (-)
(gpm)
(gpm)
0.00
0.00
Beg. Node
Residual
Pressure (psi)
22.68
Imbalance
Flow At Beg.
Node (gpm)
-0.00004
200
220
-25.57
25.57
0.00
0.00
19.43
0.00176
210
220
-26.67
26.67
0.00
0.00
21.14
0.00242
220
220
220
200
210
230
0
0
0
25.57
26.67
-52.23
0.00
0.00
0.00
22.11
-0.00003
230
230
230
190
220
240
0
0
0
52.93
52.23
-105.17
0.00
0.00
0.00
30.50
-0.00002
240
240
240
160
230
250
0
0
0
187.60
105.17
-292.77
0.00
0.00
0.00
34.06
-0.00001
250
250
240
260
0
0
292.77
-292.77
0.00
0.00
0.00
56.23
-0.00001
260
260
250
280
0
0
292.77
-292.77
0.00
0.00
0.00
64.29
-0.00002
270
280
-50.00
0.00
50.00
0.00
67.69
0.00004
280
280
280
260
270
290
0
0
0
292.77
50.00
-342.77
0.00
0.00
0.00
66.01
-0.00004
290
290
280
310
0
0
342.77
-342.77
0.00
0.00
0.00
74.00
0.00001
300
310
-50.00
0.00
50.00
0.00
73.03
0.00005
310
310
310
290
300
320
0
0
0
342.77
50.00
-392.77
0.00
0.00
0.00
76.53
-0.00004
320
320
310
330
0
0
392.77
-392.77
0.00
0.00
0.00
96.52
0.00000
330
320
392.77
0.00
0.00
-392.77
97.30
21 of 50
Nodal
KFactor
(K)
Elevation
(feet)
Spk/Hose
Discharge
(gpm)
q (gpm)
Q (gpm)
Velocity
(fps)
F. L./ft
(psi/ft)
Fittings
Type-Grp
Pipe-Len.
Fit-Len.
Tot-Len.
(ft)
PF-(psi)
PE-(psi)
PT-(psi)
10
30
5.80
59.38
22.72
0.00
60.04
0.00
SCHED 40 WET STEEL
15.34
17.34
1.00
1.049
120
22.72
22.72
8.43
0.16480
E
0
11.81
2.00
13.81
2.276
-0.284
1.992
20
30
5.80
59.38
23.64
0.00
60.04
0.00
SCHED 40 WET STEEL
16.62
17.34
1.00
1.049
120
23.64
23.64
8.78
0.17740
T
0
0.66
5.00
5.66
1.003
-0.284
0.719
40
60
5.80
59.38
22.46
0.00
60.04
0.00
SCHED 40 WET STEEL
15.00
17.05
1.00
1.049
120
22.46
22.46
8.34
0.16137
E
0
12.47
2.00
14.47
2.334
-0.284
2.050
50
60
5.80
59.38
23.45
0.00
60.04
0.00
SCHED 40 WET STEEL
16.35
17.05
1.00
1.049
120
23.45
23.45
8.70
0.17472
T
0
0.66
5.00
5.66
0.988
-0.284
0.704
30
70
0.00
60.04
0.00
0.00
60.04
0.00
SCHED 40 WET STEEL
17.34
23.66
1.00
1.049
120
0.00
46.36
17.21
0.61667
T
0
5.25
5.00
10.25
6.320
0.000
6.320
60
70
0.00
60.04
0.00
0.00
60.04
0.00
SCHED 40 WET STEEL
17.05
23.66
1.00
1.049
120
0.00
45.91
17.04
0.60568
T
0
5.91
5.00
10.91
6.606
0.000
6.606
70
80
0.00
60.04
0.00
0.00
59.06
0.00
SCHED 40 WET STEEL
23.66
26.54
1.50
1.610
120
0.00
92.27
14.54
0.27355
T
0
0.98
8.00
8.98
2.458
0.426
2.884
90
110
5.80
59.38
23.45
0.00
60.04
0.00
SCHED 40 WET STEEL
16.35
18.53
1.00
1.049
120
23.45
23.45
8.70
0.17474
E
0
12.14
2.00
14.14
2.471
-0.284
2.186
100
110
5.80
59.38
24.44
0.00
60.04
0.00
SCHED 40 WET STEEL
17.75
18.53
1.00
1.049
120
24.44
24.43
9.07
0.18857
T
0
0.66
5.00
5.66
1.067
-0.284
0.782
120
140
5.80
59.38
23.22
0.00
60.04
0.00
SCHED 40 WET STEEL
16.03
18.22
1.00
1.049
120
23.22
23.22
8.62
0.17155
E
0
12.47
2.00
14.47
2.482
-0.284
2.198
130
140
5.80
59.38
24.23
0.00
60.04
0.00
SCHED 40 WET STEEL
17.46
18.22
1.00
1.049
120
24.23
24.23
9.00
0.18568
T
0
0.66
5.00
5.66
1.050
-0.284
0.766
110
150
0.00
60.04
0.00
0.00
60.04
0.00
SCHED 40 WET STEEL
18.53
25.24
1.00
1.049
120
0.00
47.88
17.78
0.65471
T
0
5.25
5.00
10.25
6.710
0.000
6.710
22 of 50
Nodal
KFactor
(K)
Elevation
(feet)
Spk/Hose
Discharge
(gpm)
q (gpm)
Q (gpm)
Velocity
(fps)
F. L./ft
(psi/ft)
Fittings
Type-Grp
Pipe-Len.
Fit-Len.
Tot-Len.
(ft)
PF-(psi)
PE-(psi)
PT-(psi)
140
150
0.00
60.04
0.00
0.00
60.04
0.00
SCHED 40 WET STEEL
18.22
25.24
1.00
1.049
120
0.00
47.45
17.61
0.64374
T
0
5.91
5.00
10.91
7.021
0.000
7.021
80
160
0.00
59.06
0.00
0.00
59.06
0.00
SCHED 40 WET STEEL
26.54
28.28
2.00
2.067
120
0.00
92.27
8.82
0.08102
T
0
11.48
10.00
21.48
1.740
0.000
1.740
150
160
0.00
60.04
0.00
0.00
59.06
0.00
SCHED 40 WET STEEL
25.24
28.28
1.50
1.610
120
0.00
95.33
15.02
0.29058
T
0
0.98
8.00
8.98
2.611
0.426
3.037
170
190
5.80
59.38
25.93
0.00
60.04
0.00
SCHED 40 WET STEEL
19.99
22.68
1.00
1.049
120
25.93
25.93
9.63
0.21047
E
0
12.14
2.00
14.14
2.976
-0.284
2.692
180
190
5.80
59.38
27.01
0.00
60.04
0.00
SCHED 40 WET STEEL
21.68
22.68
1.00
1.049
120
27.01
27.00
10.02
0.22690
T
0
0.66
5.00
5.66
1.283
-0.284
0.999
200
220
5.80
59.38
25.57
0.00
60.04
0.00
SCHED 40 WET STEEL
19.43
22.11
1.00
1.049
120
25.57
25.57
9.49
0.20504
E
0
12.47
2.00
14.47
2.966
-0.284
2.682
210
220
5.80
59.38
26.67
0.00
60.04
0.00
SCHED 40 WET STEEL
21.14
22.11
1.00
1.049
120
26.67
26.67
9.90
0.22169
T
0
0.66
5.00
5.66
1.254
-0.284
0.970
190
230
0.00
60.04
0.00
0.00
60.04
0.00
SCHED 40 WET STEEL
22.68
30.50
1.00
1.049
120
0.00
52.93
19.65
0.78818
T
0
4.92
5.00
9.92
7.820
0.000
7.820
220
230
0.00
60.04
0.00
0.00
60.04
0.00
SCHED 40 WET STEEL
22.11
30.50
1.00
1.049
120
0.00
52.23
19.39
0.76899
T
0
5.91
5.00
10.91
8.387
0.000
8.387
160
240
0.00
59.06
0.00
0.00
59.06
0.00
SCHED 40 WET STEEL
28.28
34.06
2.00
2.067
120
0.00
187.60
17.94
0.30112
T
0
9.19
10.00
19.19
5.777
0.000
5.777
230
240
0.00
60.04
0.00
0.00
59.06
0.00
SCHED 40 WET STEEL
30.50
34.06
1.50
1.610
120
0.00
105.17
16.57
0.34848
T
0
0.98
8.00
8.98
3.131
0.426
3.557
240
250
0.00
59.06
0.00
0.00
59.06
0.00
SCHED 40 WET STEEL
34.06
56.23
2.50
2.469
120
0.00
292.77
19.62
0.28873
E3T
0
34.78
42.00
76.78
22.168
0.000
22.168
23 of 50
Nodal
KFactor
(K)
Elevation
(feet)
Spk/Hose
Discharge
(gpm)
q (gpm)
Q (gpm)
Velocity
(fps)
F. L./ft
(psi/ft)
Fittings
Type-Grp
Pipe-Len.
Fit-Len.
Tot-Len.
(ft)
PF-(psi)
PE-(psi)
PT-(psi)
250
260
0.00
59.06
0.00
0.00
59.06
0.00
SCHED 40 WET STEEL
56.23
64.29
3.00
3.068
120
0.00
292.77
12.71
0.10025
3T
0
35.43
45.00
80.43
8.063
0.000
8.063
260
280
0.00
59.06
0.00
0.00
59.06
0.00
SCHED 40 WET STEEL
64.29
66.01
4.00
4.026
120
0.00
292.77
7.38
0.02669
T2GC
0
18.37
46.00
64.37
1.718
0.000
1.718
270
280
0.00
50.85
50.00
0.00
59.06
0.00
SCHED 40 WET STEEL
67.69
66.01
1.50
1.610
120
50.00
50.00
7.88
0.08805
ETG
0
8.20
13.00
21.20
1.867
-3.552
-1.685
280
290
0.00
59.06
0.00
0.00
44.29
0.00
SCHED 40 WET STEEL
66.01
74.00
4.00
4.026
120
0.00
342.77
8.64
0.03573
ET
0
14.76
30.00
44.76
1.599
6.393
7.992
290
310
0.00
44.29
0.00
0.00
44.29
0.00
SCHED 40 WET STEEL
74.00
76.53
4.00
4.026
120
0.00
342.77
8.64
0.03573
T
0
50.85
20.00
70.85
2.532
0.000
2.532
300
310
0.00
36.09
50.00
0.00
44.29
0.00
SCHED 40 WET STEEL
73.03
76.53
1.50
1.610
120
50.00
50.00
7.88
0.08805
3ETG
0
59.06
21.00
80.06
7.049
-3.552
3.498
310
320
0.00
44.29
0.00
0.00
0.00
0.00
SCHED 40 WET STEEL
76.53
96.52
6.00
6.065
120
0.00
392.77
4.36
0.00625
E2T
0
55.77
74.00
129.77
0.811
19.178
19.989
320
330
0.00
0.00
0.00
0.00
0.00
0.00
SCHED 40 WET STEEL
96.52
97.30
6.00
6.065
120
0.00
392.77
4.36
0.00625
ET3GC
0
39.37
85.00
124.37
0.777
0.000
0.777
24 of 50
Area Group
Code
Sprinkler
KFactor (K)
Sprinkler
Elevation
(feet)
Residual
Flowing Area
Pressure
(ft)
(psi)
Flowing
Density
(gpm/ft)
Sprinkler
Discharge
(gpm)
10
Sub Totals For Non-Group
5.80
59.38
15.34
125.00
125.00
0.182
0.182
22.72
22.72
20
Sub Totals For Non-Group
5.80
59.38
16.62
125.00
125.00
0.189
0.189
23.64
23.64
40
Sub Totals For Non-Group
5.80
59.38
15.00
125.00
125.00
0.180
0.180
22.46
22.46
50
Sub Totals For Non-Group
5.80
59.38
16.35
125.00
125.00
0.188
0.188
23.45
23.45
90
Sub Totals For Non-Group
5.80
59.38
16.35
125.00
125.00
0.188
0.188
23.45
23.45
100
Sub Totals For Non-Group
5.80
59.38
17.75
125.00
125.00
0.195
0.195
24.44
24.44
120
Sub Totals For Non-Group
5.80
59.38
16.03
125.00
125.00
0.186
0.186
23.22
23.22
130
Sub Totals For Non-Group
5.80
59.38
17.46
125.00
125.00
0.194
0.194
24.23
24.23
170
Sub Totals For Non-Group
5.80
59.38
19.99
125.00
125.00
0.207
0.207
25.93
25.93
180
Sub Totals For Non-Group
5.80
59.38
21.68
125.00
125.00
0.216
0.216
27.01
27.01
200
Sub Totals For Non-Group
5.80
59.38
19.43
125.00
125.00
0.205
0.205
25.57
25.57
210
Sub Totals For Non-Group
5.80
59.38
21.14
125.00
125.00
0.213
0.213
26.67
26.67
1500.00
0.195
292.79
25 of 50
40
15.00 psi
22.46 gpm
Sprinkler Summary
Sprinkler System Type:
Specified Area Of Application:
Minimum Desired Density:
Application Average Density:
Application Average Area Per Sprinkler:
Sprinkler Flow:
Average Sprinkler Flow:
Wet
1500.00
0.004
0.195
125.00
292.79
24.40
ft
gpm/ft
gpm/ft
ft
gpm
gpm
19.65 ft/sec
2.60 psi
0.0100
0.0069
0.0021
0.0025
0.0007
psi
psi
psi
gpm
gpm
32
12
236.58 gal
Sprinkler Flow:
Non-Sprinkler Flow:
292.79 gpm
100.00 gpm
97.30 psi
392.77 gpm
26 of 50
27 of 50
for
MINESTRY OF INTERIOR
Prepared By:
R.Hamed
AL-ARRAB CONTERACTINCOMPANY (ACC)
June, 2014
28 of 50
R.Hamed
Date:
Approving Agency:
Phone:
City, State Zip Code:
MINESTRY OF INTERIOR
AL-ARRAB
CONTERACTINCOMPANY (ACC)
Representative:
City And State:
Main Building_Part A
Building Owner:
Phone at Building:
City, State Zip Code:
Project Data
Description Of Hazard:
Design Area Of Water Application:
Default Hose K-Factor:
Inside Hose Stream Allowance:
In Rack Sprinkler Allowance:
Ordinary 1
1
25.00
0.00
0.00
ft
K
gpm
gpm
Hose Specifications
Make:
Size:
Model:
Temperature Rating:
0 F
Date Of Test:
0 ft
0.00 gpm
505.27 gpm
Static Pressure:
Test Residual Pressure:
Calculated Inflow Residual Pressure:
0.00 psi
0.00 psi
149.78 psi
Demand
100.00 psi
7
6
2
0.00 gpm/ft
0
0
29 of 50
Hose KFactor
(K)
Branch Len.
(ft)
Pressure
Estimate (psi)
Branch Stnd
Fittings
Fixed Flow
(gpm)
Branch Sprk
KFactor (K)
Hose
----
---0.000
25.00
0.0
100.00
----
45.93
0.0
0.00
0.00
20
No Discharge
----
---0.000
N/A
0.0
101.86
----
45.93
0.0
0.00
0.00
30
Hose
----
---0.000
25.00
0.0
104.33
----
36.09
0.0
0.00
0.00
40
No Discharge
----
---0.000
N/A
0.0
107.61
----
36.09
0.0
0.00
0.00
50
No Discharge
----
---0.000
N/A
0.0
119.04
----
16.40
0.0
0.00
0.00
60
No Discharge
----
---0.000
N/A
0.0
125.00
----
16.40
0.0
0.00
0.00
70
No Discharge
----
---0.000
N/A
0.0
149.78
----
0.00
0.0
0.00
0.00
Node
No.
Node Description
Branch Description
10
30 of 50
Type
Group
Fitting
Data
Nominal
Length
(feet)
Fitting
Length
(feet)
2.500
EG
1.64
7.00
8.64
120
40
4.000
3T
14.76
60.00
74.76
120
30
40
2.500
TG
1.64
13.00
14.64
120
40
50
4.000
19.69
20.00
39.69
120
50
60
4.000
2ETG
39.37
42.00
81.37
120
60
70
4.000
3ETGC
167.32
74.00
241.32
120
Beg.
Node
End.
Node
Pipe Description
10
20
20
Total
CFactor
Length (gpm/inch(feet)
psi)
31 of 50
Pipe
Type
Group
Pipe
Flow Rate
(gpm)
Hose Flow
At Beg. Node
(gpm)
Fixed Flow
Out (+)
In (-)
(gpm)
(gpm)
Beg. Node
Residual
Pressure (psi)
Imbalance
Flow At Beg.
Node (gpm)
10
20
-250.01
249.99
0.00
0.00
100.00
20
20
10
40
0
0
250.01
-249.93
0.00
0.00
0.00
101.86
0.08094
30
40
-255.26
255.35
0.00
0.00
104.33
0.08598
40
40
40
20
30
50
0
0
0
249.93
255.26
-505.25
0.00
0.00
0.00
107.61
-0.05243
50
50
40
60
0
0
505.25
-505.27
0.00
0.00
0.00
119.04
-0.02284
60
60
50
70
0
0
505.27
-505.27
0.00
0.00
0.00
125.00
0.00416
70
60
505.27
0.00
0.00
-505.27
149.78
32 of 50
Nodal
KFactor
(K)
Elevation
(feet)
Hose/Fix
Discharge
(gpm)
q (gpm)
Q (gpm)
Velocity
(fps)
F. L./ft
(psi/ft)
Fittings
Type-Grp
Pipe-Len.
Fit-Len.
Tot-Len.
(ft)
PF-(psi)
PE-(psi)
PT-(psi)
10
20
25.00
45.93
249.99
0.00
45.93
0.00
SCHED 40 WET STEEL
100.00
101.86
2.50
2.469
120
249.99
250.01
16.75
0.21559
EG
0
1.64
7.00
8.64
1.863
0.000
1.863
20
40
0.00
45.93
0.00
0.00
36.09
0.00
SCHED 40 WET STEEL
101.86
107.61
4.00
4.026
120
0.00
249.93
6.30
0.01992
3T
0
14.76
60.00
74.76
1.489
4.262
5.751
30
40
25.00
36.09
255.35
0.00
36.09
0.00
SCHED 40 WET STEEL
104.33
107.61
2.50
2.469
120
255.35
255.26
17.11
0.22405
TG
0
1.64
13.00
14.64
3.280
0.000
3.280
40
50
0.00
36.09
0.00
0.00
16.40
0.00
SCHED 40 WET STEEL
107.61
119.04
4.00
4.026
120
0.00
505.25
12.73
0.07324
T
0
19.69
20.00
39.69
2.907
8.524
11.430
50
60
0.00
16.40
0.00
0.00
16.40
0.00
SCHED 40 WET STEEL
119.04
125.00
4.00
4.026
120
0.00
505.27
12.73
0.07325
2ETG
0
39.37
42.00
81.37
5.960
0.000
5.960
60
70
0.00
16.40
0.00
0.00
0.00
0.00
SCHED 40 WET STEEL
125.00
149.78
4.00
4.026
120
0.00
505.27
12.73
0.07325
3ETGC
0
167.32
74.00
241.32
17.677
7.103
24.780
33 of 50
Area Group
Code
Hose
KFactor (K)
Node
Elevation
(feet)
Residual
Flowing Area
Pressure
(ft)
(psi)
10
Sub Totals For Non-Group
25.00
45.93
100.00
30
Sub Totals For Non-Group
25.00
36.09
104.33
Flowing
Density
(gpm/ft)
Hose
Discharge
(gpm)
130.00
130.00
1.923
1.923
249.99
249.99
130.00
130.00
1.964
1.964
255.35
255.35
260.00
1.944
505.34
34 of 50
10
100.00 psi
249.99 gpm
Hose Summary
Hose System Type:
Specified Area Of Application:
Minimum Desired Density:
Application Average Density:
Application Average Area Per Hose:
Hose Flow:
Average Hose Flow:
1.00
0.000
505.339
0.50
505.34
252.67
ft
gpm/ft
gpm/ft
ft
gpm
gpm
17.11 ft/sec
1.97 psi
0.0100
0.0076
0.0020
0.0860
0.0352
psi
psi
psi
gpm
gpm
6
2
160.29 gal
Hose Flow:
Fixed Flow:
505.34 gpm
0.00 gpm
149.78 psi
505.27 gpm
35 of 50
36 of 50
37 of 50
ATTACHEMENTS
38 of 50
Copyright 2014 National Fire Protection Association (NFPA). Licensed, by agreement, for individual use and single download on February 26, 2014 to Radicon Gulf Consultant for designated user Mahmoud
Nabil. No other reproduction or transmission in any form permitted without written permission of NFPA. For inquires or to report unauthorized use, contact licensing@nfpa.org.
1353
INSTALLATION REQUIREMENTS
Table 8.6.2.2.1(a) Protection Areas and Maximum Spacing of Standard Pendent and Upright Spray Sprinklers for Light Hazard
Maximum
Protection Area
ft2
m2
ft
Hydraulically calculated
Pipe schedule
Hydraulically calculated
Pipe schedule
Hydraulically calculated
225
200
225
200
225
20.9
18.6
20.9
18.6
20.9
15
15
15
15
15
4.6
4.6
4.6
4.6
4.6
Pipe schedule
200
18.6
15
4.6
Hydraulically calculated
225
20.9
15
4.6
Pipe schedule
200
18.6
15
4.6
All
130
12.1
15
4.6
All
168
15.6
15
4.6
All
130
12.1
15
4.6
All
120
11.1
Construction Type
System Type
Noncombustible unobstructed
Noncombustible unobstructed
Noncombustible obstructed
Noncombustible obstructed
Combustible unobstructed with no
exposed members
Combustible unobstructed with no
exposed members
Combustible unobstructed with
exposed members 3 ft (0.91 m)
or more on center
Combustible unobstructed with
exposed members 3 ft (0.91 m)
or more on center
Combustible unobstructed with
members less than 3 ft (0.91 m)
on center
Combustible obstructed with
exposed members 3 ft (0.91 m)
or more on center
Combustible obstructed with
members less than 3 ft (0.91 m)
on center
Combustible concealed spaces in
accordance with 8.6.4.1.4
Maximum Spacing
15
4.6
parallel to the parallel to the
slope
slope
10
3.05
perpendicular perpendicular
to the slope*
to the slope*
See 8.6.4.1.4.4.
Maximum
Spacing
Construction
Type
System
Type
ft2
m2
ft
All
All
130
12.1
15
4.6
All
Pipe
schedule
Hydraulically
calculated
with
density
0.25
Hydraulically
calculated
with
density
<0.25
Maximum
Spacing
ft2
m2
ft
90
8.4
12*
3.7*
100
9.3
12*
3.7*
130
12.1
15
4.6
2013 Edition
39 of 50
Copyright 2014 National Fire Protection Association (NFPA). Licensed, by agreement, for individual use and single download on February 26, 2014 to Radicon Gulf Consultant for designated user Mahmoud
Nabil. No other reproduction or transmission in any form permitted without written permission of NFPA. For inquires or to report unauthorized use, contact licensing@nfpa.org.
13122
Light hazard
Ordinary hazard (Groups 1 and 2)
Extra hazard (Groups 1 and 2)
Special occupancy hazard (see Chapter 22)
2013 Edition
Occupancy
Classification
Light hazard
Ordinary
hazard
Minimum
Residual
Pressure
Required
psi
bar
15
20
1
1.4
Acceptable Flow at
Base of Riser
(Including Hose
Stream Allowance)
gpm
L/min
500750 18932839
8501500 32185678
Duration
(minutes)
3060
6090
40 of 50
Copyright 2014 National Fire Protection Association (NFPA). Licensed, by agreement, for individual use and single download on February 26, 2014 to Radicon Gulf Consultant for designated user Mahmoud
Nabil. No other reproduction or transmission in any form permitted without written permission of NFPA. For inquires or to report unauthorized use, contact licensing@nfpa.org.
13123
DESIGN APPROACHES
6.1
Density (mm/min)
8.1
10.2
12.2
372
rd
rd
za
za
ha
ha
ra
ra
ro
1
up
up
ary
232
186
2000
1500
0.05
279
ro
in
Ord
2500
ary
in
Ord
3000
16.3
465
t
Ex
t
Ex
4000
14.3
0.10
0.15
0.20
0.25
Density (gpm/ft 2 )
0.30
0.35
4.1
L ig h
2.0
5000
139
0.40
Inside Hose
Occupancy
Total
Combined
Inside and
Outside Hose
Duration
L/min (minutes)
gpm
L/min
gpm
Light
hazard
0, 50, or
100
0, 189,
or 379
100
379
30
Ordinary
hazard
0, 50, or
100
0, 189,
or 379
250
946
6090
Extra
hazard
0, 50, or
100
0, 189,
or 379
500
1893
90120
ing shall be 3000 ft2 (279 m2). The design area of 3000 ft2
(279 m2) shall be applied only to the sprinkler system or
portions of the sprinkler system that are adjacent to the
qualifying combustible concealed space. The term adjacent shall apply to any sprinkler system protecting a space
above, below, or next to the qualifying concealed space
except where a barrier with a fire resistance rating at least
equivalent to the water supply duration completely separates the concealed space from the sprinklered area.
(4) The following unsprinklered concealed spaces shall not
require a minimum area of sprinkler operation of 3000 ft2
(279 m2):
(a) Noncombustible and limited-combustible concealed
spaces with minimal combustible loading having no
access. The space shall be considered a concealed
space even with small openings such as those used as
return air for a plenum.
(b) Noncombustible and limited-combustible concealed
spaces with limited access and not permitting occupancy or storage of combustibles. The space shall be
considered a concealed space even with small openings such as those used as return air for a plenum.
(c) Combustible concealed spaces filled entirely with
noncombustible insulation.
(d)*Light or ordinary hazard occupancies where noncombustible or limited-combustible ceilings are directly attached to the bottom of solid wood joists or solid
limited-combustible construction or noncombustible
construction so as to create enclosed joist spaces 160 ft3
(4.5 m3) or less in volume, including space below insulation that is laid directly on top or within the ceiling
joists in an otherwise sprinklered concealed space.
(e) Concealed spaces where rigid materials are used and
the exposed surfaces have a flame spread index of 25 or
less and the materials have been demonstrated to not
propagate fire more than 10.5 ft (3.2 m) when tested in
accordance with ASTM E 84, Standard Test Method of Surface Burning Characteristics of Building Materials, or
ANSI/UL 723, Standard for Test for Surface Burning Characteristics of Building Materials, extended for an additional 20 minutes in the form in which they are installed
in the space.
2013 Edition
41 of 50
Copyright 2014 National Fire Protection Association (NFPA). Licensed, by agreement, for individual use and single download on February 26, 2014 to Radicon Gulf Consultant for designated user Mahmoud
Nabil. No other reproduction or transmission in any form permitted without written permission of NFPA. For inquires or to report unauthorized use, contact licensing@nfpa.org.
13236
Pv =
23.4.1* General.
23.4.1.1 A calculated system for a building, or a calculated
addition to a system in an existing sprinklered building, shall
supersede the rules in this standard governing pipe schedules,
except that all systems shall continue to be limited by area.
23.4.1.2 Pipe sizes shall be no less than 1 in. (25 mm) nominal for ferrous piping and 34 in. (20 mm) nominal for copper
tubing or nonmetallic piping listed for fire sprinkler service.
23.4.1.3 The size of pipe, number of sprinklers per branch
line, and number of branch lines per cross main shall otherwise be limited only by the available water supply.
23.4.1.4 However, sprinkler spacing and all other rules covered in this and other applicable standards shall be observed.
23.4.1.5 Hydraulic calculations shall extend to the effective
point of the water supply where the characteristics of the water
supply are known.
23.4.2 Formulas.
23.4.2.1 Friction Loss Formula.
23.4.2.1.1 Pipe friction losses shall be determined on the basis of the HazenWilliams formula, as follows:
p=
4.52Q 1.85
C 1.85d 4.87
where:
p = frictional resistance (psi/ft of pipe)
Q = flow (gpm)
C = friction loss coefficient
d = actual internal diameter of pipe (in.)
23.4.2.1.2 For SI units, the following equation shall be used:
Q 1.85
pm = 6.05 1.85m 4.87 105
C dm
where:
pm = frictional resistance (bar/m of pipe)
Qm = flow (L/min)
C = friction loss coefficient
dm = actual internal diameter (mm)
Subsection 23.4.2.1.3 was revised by a
tentative interim amendment (TIA). See
page 1.
P = 0.000216 f
l Q
d5
where:
P = friction loss (psi)
f = friction loss factor from Moody diagram
l = length of pipe or tube (ft)
= density of fluid (lb/ft3)
Q = flow in pipe or tube (gpm)
d = inside diameter of tube (in.)
23.4.2.2 Velocity Pressure Formula. Velocity pressure shall be
determined on the basis of the following formula:
2013 Edition
0.001123Q 2
D4
where:
Pv = velocity pressure (psi) (SI, 1 psi = 0.0689 bar)
Q = flow (gpm) (SI, 1 gal = 3.785 L)
D = inside diameter (in.) (SI, 1 in. = 25.4 mm)
23.4.2.3 Normal Pressure Formula. Normal pressure (Pn)
shall be determined on the basis of the following formula:
Pn = Pt Pv
where:
Pn = normal pressure
Pt = total pressure [psi (bar)]
Pv = velocity pressure [psi (bar)]
23.4.2.4 Hydraulic Junction Points.
23.4.2.4.1 Pressures at hydraulic junction points shall balance within 0.5 psi (0.03 bar).
23.4.2.4.2 The highest pressure at the junction point, and
the total flows as adjusted, shall be carried into the calculations.
23.4.2.4.3 Pressure balancing shall be permitted through the
use of a K-factor developed for branch lines or portions of
systems using the formula in 23.4.2.5.
23.4.2.5 K-Factor Formula. K-factors, flow from an orifice, or
pressure from an orifice shall be determined on the basis of
the following formula:
Kn =
Q
P
where:
Kn = equivalent K at a node
Q = flow at the node
P = pressure at the node
23.4.3 Equivalent Pipe Lengths of Valves and Fittings.
23.4.3.1 Pipe and Fittings.
23.4.3.1.1 Table 23.4.3.1.1 shall be used to determine the
equivalent length of pipe for fittings and devices unless manufacturers test data indicate that other factors are appropriate.
23.4.3.1.2 For saddle-type fittings having friction loss greater
than that shown in Table 23.4.3.1.1, the increased friction loss
shall be included in hydraulic calculations.
23.4.3.1.3 Equivalent Length Modifier.
23.4.3.1.3.1 For internal pipe diameters different from
Schedule 40 steel pipe [Schedule 30 for pipe diameters 8 in.
(200 mm) and larger], the equivalent length shown in Table
23.4.3.1.1 shall be multiplied by a factor derived from the following formula:
4.87
= Factor
23.4.3.1.3.2 The factor thus obtained shall be further modified as required by Table 23.4.3.1.1. This table shall apply to
other types of pipe listed in Table 23.4.3.1.1 only where modified by factors from 23.4.3.1.1 and 23.4.3.2.
42 of 50
Copyright 2014 National Fire Protection Association (NFPA). Licensed, by agreement, for individual use and single download on February 26, 2014 to Radicon Gulf Consultant for designated user Mahmoud
Nabil. No other reproduction or transmission in any form permitted without written permission of NFPA. For inquires or to report unauthorized use, contact licensing@nfpa.org.
13266
Average Weight
Volume
Density
Bale Type
in.
mm
lb
kg
ft3
m3
lb/ft3
kg/m3
Compressed,
standard
Gin, standard
Compressed,
universal
Gin, universal
Compressed,
high density
Densely
packed
baled cotton
57 29 23
500
226.8
22.0
0.62
22.7
366
55 31 21
58 25 21
500
500
226.8
226.8
20.7
17.6
0.58
0.50
24.2
28.4
391
454
55 26 21
58 22 21
500
500
226.8
226.8
17.4
15.5
0.49
0.44
28.7
32.2
463
515
55 21 27.6
to 35.4
500
226.8
21.1
0.60
22.0
360
2.75 in.
(70 mm)
3.5 in.
(89 mm)
1.25 in. (32 mm)
0.75 in.
(19 mm)
Shore
Material: Any suitable for 150 psi
(10.3 bar) service (shore)
Flange surface: Flat face
Gasket material: Any suitable for
150 psi (10.3 bar) service
Bolts: Four in. (16 mm) minimum
diameter, 2 in. (51 mm) long,
threaded to within 1 in. (25.4 mm)
of bolt head
Nuts: Four, to fit bolts
Washers: Four, to fit bolts
2.75 in.
(70 mm)
3.5 in.
(89 mm)
1.25 in.
(32 mm)
0.75 in.
(19 mm)
Ship
Material: Brass or bronze
suitable for 150 psi (10.3 bar)
service (ship)
2013 Edition
Animal shelters
Churches
Clubs
Eaves and overhangs, if of combustible construction with
no combustibles beneath
Educational
Hospitals, including animal hospitals and veterinary facilities
Institutional
Kennels
Libraries, except large stack rooms
Museums
Nursing or convalescent homes
Offices, including data processing
Residential
Restaurant seating areas
Theaters and auditoriums, excluding stages and prosceniums
Unused attics
43 of 50
Copyright 2014 National Fire Protection Association (NFPA). Licensed, by agreement, for individual use and single download on February 26, 2014 to Radicon Gulf Consultant for designated user Mahmoud
Nabil. No other reproduction or transmission in any form permitted without written permission of NFPA. For inquires or to report unauthorized use, contact licensing@nfpa.org.
13267
ANNEX A
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
A.5.4.2 Extra hazard (Group 2) occupancies include occupancies having uses and conditions similar to the following:
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
Asphalt saturating
Flammable liquids spraying
Flow coating
Manufactured home or modular building assemblies
(where finished enclosure is present and has combustible interiors)
Open oil quenching
Plastics manufacturing
Solvent cleaning
Varnish and paint dipping
2013 Edition
44 of 50
Copyright 2014 National Fire Protection Association (NFPA). Licensed, by agreement, for individual use and single download on February 26, 2014 to Radicon Gulf Consultant for designated user Mahmoud
Nabil. No other reproduction or transmission in any form permitted without written permission of NFPA. For inquires or to report unauthorized use, contact licensing@nfpa.org.
13395
ANNEX A
Calculated area A 2
12 ft
between sprinklers
10 ft between lines
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Where:
A = design area
S = distance between sprinklers on branch line
1.2 A
S
120
= 12.5, calculate 13
1500
Design area
Area per sprinkler
X
X
Assume a remote area of 1500 ft2 with sprinkler coverage of 120 ft2
X
X
E
A
C
D
B
F
Notes:
1. For gridded systems, the extra sprinkler (or sprinklers) on branch
line 4 can be placed in any adjacent location from B to E at the
designers option.
2. For tree and looped systems, the extra sprinkler on line 4
should be placed closest to the cross main.
1.21500 = 3.87
Number of sprinklers on branch line =
12
For SI units, 1 ft = 0.3048 m; 1 ft2 = 0.0929 m2.
E
1 This sprinkler is not in the selected area of operation.
2013 Edition
45 of 50
Copyright 2014 National Fire Protection Association (NFPA). Licensed, by agreement, for individual use and single download on February 26, 2014 to Radicon Gulf Consultant for designated user Mahmoud
Nabil. No other reproduction or transmission in any form permitted without written permission of NFPA. For inquires or to report unauthorized use, contact licensing@nfpa.org.
1418
2013 Edition
46 of 50
Copyright 2014 National Fire Protection Association (NFPA). Licensed, by agreement, for individual use and single download on February 26, 2014 to Radicon Gulf Consultant for designated user Mahmoud
Nabil. No other reproduction or transmission in any form permitted without written permission of NFPA. For inquires or to report unauthorized use, contact licensing@nfpa.org.
DESIGN
1419
2013 Edition
47 of 50
Copyright 2014 National Fire Protection Association (NFPA). Licensed, by agreement, for individual use and single download on February 26, 2014 to Radicon Gulf Consultant for designated user Mahmoud
Nabil. No other reproduction or transmission in any form permitted without written permission of NFPA. For inquires or to report unauthorized use, contact licensing@nfpa.org.
1420
2013 Edition
48 of 50
DESIGN VERIFICATION
49 of 50
Design Contract
Design Verfication
MBXX OFFICES BUILDING
Recomondations
NOVEC 1230
1
Elec.Room (A-01-025)
New Room
50 of 50