Beruflich Dokumente
Kultur Dokumente
Page 1
Figure 3 illustrates the basic setup page that appears after successful login
Arris DG950A WIFI Modem
Page 2
The following is the SSID (Service Set Identifier). This is the name of the wireless network that
is being broadcasted. So the customer would be connecting to this network granted they are
connecting to their network wirelessly.
Figure 5 illustrates the entry of the Encryption Algorithm and Pre-shared key
Each wireless modem has default settings for the wireless connection. The default settings are on
a tag at the bottom of their modem and are listed in the following format:
Network Name (SSID): **********
Encryption: WPA-TKIP ( default for all)
Network Key: ***************** (In this scenario it is 3E52C680D6823C)
(Bar Code)
WPS PIN: **************
(Bar Code)
Note: To factory default modem, simply hold down reset button for 30 seconds.
Page 3
Figure 6 illustrates the un-checking of the Enable Firewall checkbox in order to disable
the firewall
The firewall is enabled by default on all the wireless cable modems and it can be disabled by deselecting the Enable Firewall option.
Restarting Router:
Restarting the router might be necessary at times, without actually resetting the modem.
To do this have the customer click on the Utilities option at the top of the Router
Arris DG950A WIFI Modem
Page 4
Management page. There will be a Restart Router option to the left of the page. This is
illustrated below:
Figure 7 illustrates the steps to accessing the options to restart the modem
The customer will have a single option after selecting that which states Restart:
Page 5