Beruflich Dokumente
Kultur Dokumente
Ventilation systems
Environmental monitoring
Principles of Operation
The instrument is based on a piezo-resistive sensor element and can measure
positive gauge, negative gauge or differential pressure.
The pressure is measured directly by a
piezo-resistive resistance bridge that is
formed on the surface of an integral silicon diaphragm in each sensor.
29.3.07
DB_GB_DE27.fm
Schematic Diagram
Features
Robust design; over-pressure protected;
maintenance-free
Typical Applications
Condition monitoring of roll-band filters
Specifications
General
Base measur+
mbar
Pa
inWC
ing range
Max. static
operating
mbar
pressure
Max. safe
mbar
pressure
Straight line
%FS
error (max.)
Straight line
%FS
error (typ.)
Accuracy span %FS
(max.)
10K
Accuracy span %FS
(typ.)
10K
Accuracy zero %FS
point (max.) 10K
Accuracy zero %FS
point (typ.)
10K
+
++
0-4.00 0-6.0 0-10.00 0-16.00 0-25.0 0-40.0 0-60.0 0-100.0 2.50 4.00 6.00 10.00 16.00 25.0 40.0 60.0
(++)
(++)
(++)
(++)
(++)
0-400 0-600 0-1000 0-1600 (++)
250 400 600 1000 1600 (++)
0-1.60 0-2.0 0-4.00 0-6.50 0-10.00 0-16.00 0-25.0 0-40.0 1.00 1.60 2.50 4.00 6.50 10.00 16.00 25.0
50
100
250
500
50
100
250
500
150
300
750
1500
150
300
750
1500
0.3
1.0
0.5
0.3
1.0
0.5
0.4
0.3
1.0
0.4
0.2
Operating current
Display
Electrical connections
Pressure connections
Materials, housing
Materials, media contact
Mounting
Connector 1:
Output signal +
power supply
Supply -
Supply +
3-wire connections
Signal (V) +
Signal (mA) +
Supply +
2-wire connections
Connector 1:
Output signal +
power supply
Programming
The DE27 is programmed from a PC using the EU03 PC adaptor (optional accessory).
Settings:
Damping
Unit of measurement
Zero stabilization
Measuring range min./max.
Zero adjustment
Output signal transformation
Password
Notes:
(0)
: "%" units refer to the measuring range span: 0% = range min.; 100% = range max.
(1)
: Measured values within 100 counts of zero are displayed as exactly zero (i.e., zero drift is suppressed).
(2)
: Turndown ratio = 4:1 max. Only the output signal is affected. Downward sloping output signals are also possible when the starting value of the
measuring range is greater than the ending value. "%" units relate to the full pressure range, whether increasing or decreasing.
(3)
: Zero adjustment may be needed for mounting orientation other than vertical.
Bestellkennzeichen
Digital Differential
Pressure Transmitter
Measuring range
DE 27
M W
0 . . . . 4 mbar
50 mbar ............................................ 5
2
0 . . . . 6 mbar
50 mbar ............................................ 5
3
0 . . . 10 mbar
100 mbar ............................................ 5
4
0 . . . 16 mbar
100 mbar ............................................ 5
5
0 . . . 25 mbar
250 mbar ............................................ 5
6
0 . . . 40 mbar
250 mbar ............................................ 5
7
0 . . . 60 mbar
500 mbar ............................................ 5
8
0 . . 100 mbar
500 mbar ............................................ 5
9
- 2.5 . . 2.5 mbar
50 mbar ............................................ A
6
- 4 . . . . 4 mbar
50 mbar ............................................ A
7
- 6 . . . . 6 mbar
50 mbar ............................................ A
8
- 10 . . . 10 mbar 100 mbar ............................................ A
9
- 16 . . . 16 mbar 100 mbar ............................................ B
1
- 25 . . . 25 mbar 250 mbar ............................................ B
2
- 40 . . . 40 mbar 250 mbar ............................................ C
5
- 60 . . . 60 mbar 500 mbar ............................................ B
3
Accuracy class
Straight-line error 2.5% ................................................................... K
Straight-line error 1% ...................................................................... M
Pressure connections
6 / 4 mm hose nipples ........................................................................................ 4
5
Signal output
4 - 20 mA linear, 2-wire (select power supply P with this) ........................................
0 - 10 V DC linear, 3-wire (select power supply K with this) .........................................
B
C
Accessories
Order code
Description
Pins
Function
Length
06401993
Supply + signal
2m
06401994
Supply + signal
5m
EU03.F300
EU03.F200
Technische nderungen vorbehalten Subject to change without notice Changements techniques sous rserve
Fischer Mess- und Regeltechnik GmbH Bielefelder Str. 37a D-32107 Bad Salzuflen Tel. +49 5222 9740 Fax +49 5222 7170 eMail: info@fischermesstechnik.de www.fischermesstechnik.de