Beruflich Dokumente
Kultur Dokumente
07 CO SERIES
30o ANGULAR SERIES
FOR SUB SURFACE FOAM INJECTION
SYSTEM
General Information
The composite preformed Rupture Discs are
constructed of two or more components.
Designed for use in subsurface foam injection
systems.
The Progard-Oseco rupture disc consists of a
metallic top section (precision cut to control the
burst pressure), a teflon seal (fitted to the
concave side of the top section) and a vacuum
support. The disc will provide instantaneous full
opening when pressure is applied.
TECHNICAL SPECIFICATION
07 CO Rupture Disc
The Progard-Oseco basic rupture disc consists
of a slotted metal top section, with a teflon seal
and a metal vacuum support installed on the
process side of the top section.
The metal top section controls the burst
pressure and the seal isolates the top section
from the process media and also prevents
leakage.
3-8
+40 to -40
9 - 12
+30 to - 30
13 - 20
+20 to - 10
21 - 45
+16 to - 8
46 - 90
+12 to - 6
91 - 270
+10 to - 5
271 - Up
+6 to -3
Burst Tolerance
Marked Rupture Pressure @
72o
3 - 40
Over 40
Burst Tolerance
+/- 2 PSIG
+/- 5%
07 CO Insert Holders
The insert holders are 30 o seat holder that bolt
between and fits within the bolting pattern of
standard ANSI companion pipe flanges.
Insert holders are furnished with pre-assembled
screws and side clips for bench assembly.
Installation of the holder is easy, as only half of
the companion flange bolts need to be removed
entirely in order to remove the assembly for
rupture disc replacement.
The insert holders are available in nominal sizes
ranging from 1 through 12 to mate with ANSI
bolting classes 150#. Standard materials of
construction include carbon steel, 304 or 316
stainless steel.
Height
(inch)
Outside
Diameter
(inch)
1.62
1.62
1.75
1.75
1.75
2.25
8.62
2.31*
10.87
10
2.43*
13
12
2.62*
16
Size
(inch)
ANSI
Class
150
Ordering Information
The following details should be specified
when ordering:
1)
2)
3)
4)