Beruflich Dokumente
Kultur Dokumente
Whereas the Parliament of India has set out to provide a practical regime of right to
information for citizens to secure access to information under the control of public authorities,
in order to promote transparency and accountability in the working of every public authority,
and whereas the attached publication of the Bureau of Indian Standards is of particular interest
to the public, particularly disadvantaged communities and those engaged in the pursuit of
education and knowledge, the attached public safety standard is made available to promote the
timely dissemination of this information in an accurate manner to the public.
1 +, 1 +
01 ' 5
Jawaharlal Nehru
! $ ' +-
Satyanarayan Gangaram Pitroda
! > 0 B
BharthariNtiatakam
IS 903 : 1993
Reaffirmed - 2008
Indian Standard
BUREAU
MANAK
OF
BHAVAN,
1993
1993
INDIAN
9 BAHADUR
NEW
December
BIS
DELHI
STANDARDS
SHAH
ZAPAR
MARG
110002
Price Group
Fire Fighting
Sectional
Committee,
CED 22
FOREWORD
This Indian Standard ( Fourth Revision ) was adopted by the Bureau of Indian Standards, after the
draft finalized by the Fire Fighting Sectional Committee had been approved by the Civil Engineering
Division Council.
Fire hose delivery couplings, branch pipe, nozzles and nozzle spanner are some of the important
accessories used for fire fighting operations.
This standard was first published in 1958, revised
subsequently in 1965, 1975 and 1984. The fourth revision incorporates all the amendments issued
so far besides correcting the various figures according to the modifications decided by the concerned
Technical Committee.
For the purpose of deciding whether a particular requirement of this standard is complied with, the
final value, observed or calculated, expressing the result of a test or analysis, shall be rounded off in
accordance with IS 2 : 1960 Rules for rounding off numerical values ( revised ). The number of
significant places retained in the rounded off value should be the same as that of the specified value
in this standard.
(CED 22)
Reprography Unit, BIS, New Delhi, India
(CED 22)
Reprography Unit BIS, New Delhi, India
AMENDMENT
for desighation
base castings
for
( CED22)
Reprogra#hy Unit, BIS, New dclbi, India
IS 903 : 1993
Indian Standard
1 SCOPE
This standard lays down the requirements regarding
material,
shape, construction
aud test (wherever
applicable) for fire hose delivery couplings, branch
pipe, nozzles and nozzle spauner used in fire fighting
operations.
DELIVERY
HOSE
5.2 Materials
AND FINISH
AND
CRITERIA
FOR
shall conform
a) Sand Castings
Grade
IS 318
Grade
IS 304
b) Die castings
c) Hot forgings
d) Gravity
cast+
IS 1264 : 1989
die
LTB 2 of
: 1981 or
HTB 1 of
: 1981
5.2.2 Aluminium
alloys used shall be die casting
only and shall conform to IS Designation 4250,445O
and 4600 of IS 617 : 1975. Exposed aluminium surfaces
shall have an anodized finish and all threaded parts
of aluminium alloy components shall be coated with
molybdeuum
listed grease.
clearly aud
information :
COUPLING
2 REFERENCES
3 WORKMANSHIP
and
c) Year of manufacture.
5.2.3 Zinc-aluminium
alloy (copper 05 to 15 percent,
aluminium 105 to ll*Spercent, magnesium 0015 to
003 percent and balance zinc) may be used and shall
be die cast.
shall conform
IS 903 : 1993
RELEASE
WASHER
MALE
HALF
(RUBBER
/-FEMALE
HALF
)
COUPLING
COUPLING
FIG. 1 ASSEMBLY
OF DELIVERYHos~ COUPLINGS
it shall conform to designation 04017Ni12M02
IS 6529 : 1972.
6.3 Hydraulic
of
5.4 Hydraulic
SECTION 3
Test Requirement
7 NOZZLES
7.1 Materials
SECTION 2
6 BRANCH
Test Requirement
PIPE
6.1 Materials
7.3 Hydraulic
Test Requirements
IS 903 : 1993
130 max.
125 min.
!I----min.
CAM
b-5
R 12
WPROX
2.5
t 2.5 DEEP
min.
max.
ID p __-_86
--.
7
a
8
-3 min.
- 9P25:;
f
5
E
0
e
2A FEMALE
FIG.
HALF COUPLING
2 DETAILSOF DELIVERYHOSECOUPIJNG-Contd.
IS 903 : 1993
TM0
xl.25
+a
3I
T
10
min.
-I-
LOmax.
I
-
it_-
14
l-
4-
rz.s*o*2
0.0
12.5-o-2
- 0.0
DETAILS OF
CAM TCOTH
Sk0
Dimensions
A
t!
(4
(2, t:,
053
53
53+0.00
- 0.5
53
53 + 0.0
- 0.5
8 70
70
60 + 0.0
- 0.5
70
60 + 0.0
- 0.5
26
SECTJON
8 NOZZLE
SIANNER
8.4 JMlection
8.1 MaterMs
Test J~rrtuirentent
IS 903 : 1993
2643
200 mln.
NOTE -'.Iolrraace~
where
FIG. 3 BRANCH
PIVE
R 1.5
APPROX
5 min. -
27 min.
FIG. 4 NOZZLE
215f2
too:1
*
62.2 min.
62.7 max.
-19
17
1s 903 : 1993
ANNEXA
(c1uu.w 2 )
LISTOF REFERREIB INDIAN S'I'ANIh4RI)S
Tide
IS No.
291 : 1989
1337:
292 : 1983
304:
Specification
ingots and
revision )
castings
1570 (Part 2/
Schrdulcs forwroughtstcels:
Part2
Set I) : 1979 Carbon steels (unalloyed
steels),
Scciion I Wrought prt~ucts (other
Ihan wire) with specified chemical
composition aud related properties
Specification
ingots
and
318:
1981
1981
second
1980
(firsl revision )
1573 : 1986
Specification
for
electroplated
coal&s
of zinc on iron alld steel
( second revision )
2643 (Part 1)
1975
Dimensions
for pipe threads for
fastening purposes : Part 1 Basic
profile and dimensions first retkiun)
6528:
Specification
revision )
617:
1975
Specification
for aluniiniuni
and
alunlinium alloys ingots and castings
for general engineering
purposes
( second revision )
937:
1981
1264 : 1989
Specification
for brass gravity die
castings(ingotsard
castings)(Aird
revision )
Spccificatiou
for
electroplated
cc,;~li~~gs:slfhardchrt,tlliunlco;ltille
ou iron and stc~el (second revision )
1972
6529 : 1972.
Specification
for slainless
steel
bloom, billets and slabs for forging
7608 : 1987
Specification
for phosphor bronze
wire for general engineering purposes
( firsf revision )
IS 903 : 1993
ANNEXB
( Foreword )
COMMITTEE
COMPOSITION
Chairman
FIRi3ADVtSER
Members
ASSJT INsPECroR GHWRAL (mF)
ASSIT S GCURIW 0 mCER ( Alfemote
SHIU S. N.
Ministry of Railways
)
Tariff Advisory
CHAKRABORIY
Committee,
Madras
Dehradun
SHRt S. M. mAl
SHR~ D. P. DHATRAK
Urban Development
SHttt S. K. DtLARI
Municipal
Department,
Corporation
Government
of Maharashtra,
)
Bhabha Atomic Research Centre (Fire Service), Bombay
DI~R
DEPUTY D IRECl0R ( Akrnate
of Tamil Nadu
DIRECTOR
OF FQUIPMENT
National
Airport Authority,
New Delhi
Government
Bombay
of Delhi, Delhi
( Akrnare
of Andhra
Pradesh,
Hyderabad
)
CPWD (Electrical),
New Delhi
SHRI P. N. Gms~
lo personal
capacity
SHRt J. S. JAMSHED~I
Stcelage
Industries
J-1916 Chitranjan
Ministry
of Defence (DIIX)
Ltd (Minimax
Division),
Bombay
SHRt P. KHANNA
S~ttt D. J. KUU(ARNI
Municipal
SHRI S. N. KUNDU
WAGING
DIRECTOR
TECHNICALExecunv~
( Alcer,tu/e
& Industries,
Corporation
Rishra
Fire Rrigade),
SHR~G. B. h&ljQN
In personal
SHRt R. K. MISRA
SHR~SURESH BABU V. ( Alienate
Steel Authority
capacity.
New Delhi
of India
SHRt P. N. PANcHAl.
Central Industrial
Security
Force. Ministry
of Home Affairs
SHR~ B. PATHAK
PRE3lDENT
New Delhi
GENERALSwzt?rAR~ ( AJfetware )
Ministry
SHRI R. R. RAO
of Defance (DGI)
SHRII_ SW
Directorate
SHRI P. H. SElHNA
Kooverji
Newage
Industries,
SHRI N. T. P~ANI
( Allu,mrc
Systems
of Technical
Developmenf,
New Delhi
General
Surender
Nagar. Gujarat
SHRIASHOKSHARMA
Directorate
DR T. P. SHARMA
(CSIR). Roorkec
Metalluragical
DR A. K. GWTA ( Ailcrnafc
New Delhi
SHRISUNILDAS
SHRI M. C. P. SINHA( Altmmre
Bombay
IS 903 : 1993
Fire Fighting Sectional
Committee,
CED 22 -
Cod
Representing
Members
sttttt TAROTSUR
S~ttt D. NEOGI( Altenrate
SHIU J. N. V~trtL
SHRI K. R~vt ( Alterwate )
SHRI T. YOG@SWARA
SHRI JOHN TAKEY ( Alrermfe
SliRl J. %NKATARAMAN,
Director (Civil Engineering)
Member Secretary
SHRI HEMANTKUMAI~
CED 22: 1
Convener
SHRIA. K. Sum
Members
Sttttt H. S. KAPARWAN(Altemnfe
to
Shri A. K. Suri)
sttnt K. BHASKARAN
SHRtS. N. CHAKRAtIORlY
Stuu Z. 0. 1st~~ ( Alteptnzfe)
SHRIS. K. DHER~
FIREADVlSER
SHRIP. KHANNA
Sttnt D. J. Kuuc~n~t
Purst0eNT
GENUIAL~GCR~ARY( Alternate )
S~rd C. V. RAMAC~~AND~~AN
SttmK.U. K. P~UAI( Ahenrare)
SttRt H. V. RAO
SHRIK. V. BHARDWA)( Alrerrtare )
SEWORMAt4~0En
(RRESAFE~Y S~CURIIY)
S~ttt P. H. SETHNA
Stvu N. T. PANJWANI( A kernare )
SttRtB. J. SHAH
SHRIVA~SHNAVSHAH
SHRID~YAN V. SHAH( Alrerttare )
SHRIASHOKStt+4Rm4
SHRIK. R. E~WARAN( Alternate )
SUPER~~ENT
Copyright
BIS has the copyright of all its publications. No part of these publications may be reproduced in any form
without the prior permission in writing of BIS. This does not preclude the free use, in the course of
implementing the standard, of necessary details, such as symbols and sizes, type or grade designations.
Enquiries relating to copyright be addressed to the Director (Publication), BIS.
Review of Indian Standards
Amendments are issued to standards as the need arises on the basis of comments. Standards are also reviewed
periodically; a standard along with amendments is reaffirmed when such review indicates that no changes are
needed; if the review indicates that changes are needed, it is taken up for revision. Users of Indian Standards
should ascertain that they are in possession of the latest amendments or edition by referring to the latest issue
of BIS Handbook and Standards Monthly Additions.
This Indian Standard has been developed from Dot: No. CED
Amendments
22
5276 )
Text Affected
Date of Issue
Amend No.
BUREAU
OF INDIAN STANDARDS
Headquarters:
Telegrams: Manaksanstha
(Common to all offices)
Telephone
Central
323 76 17,323 38 41
Eastern
337 84 99,337 85 61
337 86 26,337 9120
Western
60 38 43
60 20 25
235 02 16,235 04 42
235 15 19,235 23 15
{ 832 92 95,832 78 58
832 78 91,832 78 92