Beruflich Dokumente
Kultur Dokumente
Scope
The specification defines the requirements
for AISI 4145 modified hot rolled CrMo bars
hardened and tempered to meet either 110ksi,
120ksi or 125ksi minimum yield strength.
Steel Manufacture
Steel is manufactured via Electric Arc Furnace,
followed by ladle refining and vacuum
degassing, and is cast into bottom-poured
wide end up ingots, or continuously cast
into 560 x 400mm blooms.
Delivery Conditions
Applicable bar diameters: 3 12
(3 10 for 125ksi variant).
Surface conditions: Black/Peeled/Smooth Turned.
Straightness: 1mm in 500mm, in 5. Enhanced
straightness may be available on request.
Tolerance: ASTM A29.
Chemical Analysis
C
Si
Mn
0.43
0.15
0.95
0.49
0.35
1.15
Cr
Mo
0.90
0.25
0.015
0.020
1.20
0.35
Ni
Al
0.25
0.030
0.015
Heat Treatment
Furnaces surveyed and calibrated per
AMS 2750
Mechanical Properties
110ksi Variant
Minimum
120ksi Variant
Maximum
Minimum
125ksi Variant
Maximum
Minimum
Maximum
110
120
125
UTS (ksi)
140
140
140
% Elongation
14
14
14
% Reduction of Area
45
Hardness HRC
30
36
30
36
30
36
Hardness HBW
286
341
286
341
286
341
54
45
Tensile per ASTM A370, Charpy per ASTM E23, HRC per ASTM E18, HBW per ASTM E10
54
40
54
Certification
A material test report will be provided,
documenting the following: Chemical analysis;
Heat treatment processing parameters;
Mechanical properties; Surface hardness; Grain
size; Reduction ratio; NDE test method/criteria.
Technical support
Tata Steel has a comprehensive technical
support team, available to advise on the
selection and use of our oil & gas product
range to ensure maximum benefit to you.
Technical Account Managers provide specialist
advice and help with day-to-day problem
solving. Plant based metallurgists and the
full resources of Tata Steel Research and
Development Laboratories are available
to assist with longer-term developments.
For further information, enquiries or any
technical guidance on our range of oil &
gas steels please contact the Commercial
Department at the address below.
www.tatasteel.com
Tata Steel
Speciality Steels
Stocksbridge, Sheffield S36 2JA
United Kingdom
T: +44 (0) 114 2882361 F: +44 (0) 114 2885033
E: enquiries.tss@tatasteel.com w: www.tatasteel.com/oilandgas
English language TSS/4145modDS/03/2014/UK
While care has been taken to ensure that the information contained in this publication is
accurate, neither Tata Steel Europe Limited, nor its subsidiaries, accept responsbility or liability
for errors or for information which is found to be misleading.
Copyright 2014
Tata Steel Europe Limited