Beruflich Dokumente
Kultur Dokumente
Characteristics
Application
SLC:
RTU560
Data Sheet Communication Unit 560CMU05
The control unit stores configuration files power
fail save in a removable Compact Flash memory
card. That allows the RTU560 to have valid
configuration data after power on and RTU560 will
be available again after a short initialization.
The serial communication interfaces CP1, CP2,
CPA and CPB are designed for RS232C and
RS485 standard.
The interfaces E1 and E2 are based for the
Ethernet standard 10BaseT/100BaseT.
The connectors of the serial and Ethernet
communication interfaces are provided as RJ45
jacks integrated in the board's front plate.
Fig. 1:
Fig. 2:
RTU560
Data Sheet Communication Unit 560CMU05
ERR
(1x) red
Error / Warning
TxD
(4x) green
Transmit data,
communication
ports CP1,
CP2, CPA,
CPB
RxD
(4x) green
Receive data,
communication
ports CP1,
CP2, CPA,
CPB
(2x) green
Ethernet
activity E1, E2
(2x) green
Ethernet link
E1, E2
RTU560
Data Sheet Communication Unit 560CMU05
Technical Data
In addition to the RTU560 general technical data,
the following applies:
Power Consumption
Microprocessor:
5 V DC:
RAM:
64 MByte
Flash Memory:
1060 mA
Mechanical Layout
Printed Circuit:
Front Panel:
Weight:
approx. 0.3 kg
Controller Type:
80C251
RAM:
32 kByte
Connector Types
16 kByte
Subrack connector:
Indirect, 48 pole
Type F DIN 41612
Ethernet Interfaces:
Serial interfaces
RS232C
38 400 bit/s
E2/102
D1/103
D2/104
S2/105
M2/106
S1.2/108
M5/109
Environmental Conditions
Temperature:
0 ... 70 C
Relative humidity:
5 ... 95 %
(non condensing)
Ordering Information
560CMU05 R0001
560CMU05 R0002
RS485
19 200 bit/s
G Signal ground
A Receive/Transmit
B Receive/Transmit
10BaseT/100BaseT
Bit rate:
10/100 MBit/s
Note:
We reserve the right to make technical changes or modify the
contents of this document without prior notice. With regard to
purchase orders, the agreed particulars shall prevail. ABB AG
does not accept any responsibility whatsoever for potential errors
or possible lack of information in this document.
We reserve all rights in this document and in the subject matter
and illustrations contained therein. Any reproduction, disclosure to
third parties or utilization of its contents - in whole or in parts - is
forbidden without prior written consent of ABB AG.
Copyright 2011 ABB
All rights reserved