Sie sind auf Seite 1von 3

Further to our discussion, please find the following tentative schedule and specifications for the

program
The trainee will be remaining in the CA Coordination and Technical Support Department
During the period of transfer, the trainee will be participating activities in the designated center or
department
A)
Objective:
Assignment:
Duration:
B)
Objective:
Assignment:
Support:
References:
12th of ____

Management of Engineering
Essay/dissertation, Reading Documentations.
11th of May 11th of ____ CA Coordination and Technical Support Department

Application of Theory, Practical Experience, Communication Skills


Reading standards/codes, Laboratory experiences, Lab Report (follows standard format).
Engineering Technician, sample lab report, sample lab report advisory from departments
L.E.C.M. Work Request and Price List item no.

DMC Department of Construction Materials - Center of Materials Testing (NEM)


Steel 1
1. 1.01 a/b Tensile test of steel bars
[BS EN 10002-1:2001 / BS 4449:1988]
1.05
Tensile test of metallic materials [BS EN 10002-1:2001]
2. 1.02 a/b Bend test of steel bars
[BS 4449: 1988]
3. 1.03 a/b Re-bend test of steel bars
[BS 4449:1988]
4. 1.04 a/b Tensile test of steel bar-splice joint[BS8110-1:1985]
Steel 2
1. 1.05
2. 1.05a
3. 1.06
4. 1.07
5. 1.08
6. 1.09
7. 1.10

Tensile test of metallic materials


[ BS EN 10002-1:2001]
Sample preparation of metallic materials
[ISO 377:1997] (Self-preparation)
Tensile test of pre-stressing steel strand [BS 5896; ASTM A370]
Tensile test of steel fabric
[BS 4482 : 1985]
Shear test of welds of steel fabric
[BS 4483: 1985]
Tensile test of full size bolt
ISO 898-1-2009]
Proofing load test of full-size bolt
[ISO 898-1;2009]

Masonry and paving block


1. 9.02 Compression strength test of masonry, for each specimen [BS 6073: Part 1; BS 3921: 1985]
2. 9.03
Water absorption test of masonry
[BS 6073: Part 1: 1981; BS 3921: 1985]
3. 9.06
Compressive strength of precast concrete paving blocks, each block. [BS6717: Part 1: 1986]

Dimension stone
1. 7.08 Absorption and bulk specific gravity of dimension stone
[ASTM C97-09]
2. 7.09 Compressive strength of dimension stone
[ASTM C170-09]
3. 7.10 Modulus of rupture of dimension stone
[ASTM C 99-09]
4. 7.11 Flexural strength of dimension stone
[ASTM C880-09]
5. 7.12 Strength of individual stone anchorages in dimension stone [ASTM C 1254 09]
Rock
1. 7.01 Unconfined compressive strength of intact rock cores
[ASTM D 7012 07 Method C]
2. 7.03 splitting tensile strength of intact rock cores
[ASTM D 3967 08]
3. 7.04 Absorption and bulk specific gravity of rock
[ASTM C 97-09]
4. 7.05 Point load strength Index of Rock
[ASTM D 5731-08]
PFA and GGABS (Pulverized fuel ash and ground granulated blast furnace slag)
1. 16.01 Activity index of PFA
[Macau Standard for Concrete and EN 196-1:2005]
_____________________________________________________________ (STOP SEARCHING FOR PDF)
2. 16.02 Water Content for standard consistency
[EN 196-3:2005]
3. 16.03 Soundness of PFA
[Macau Standard for Concrete and EN 196-3;2005]
4. Density of PFA
[ASTM C188 09]
5. Fineness of PFA
[EN 451-2:1995]
6. Specific surface area of GGBS
[GB/T 18046 -2008]
7. Activity index of GGBS
[GB/T 18046 2008]
Cement
1. 6.01/6.02
Flexural and Compressive strength
[EN 196-1:2005]
2. 6.03/6.04 /6.05/6.06
Water content for standard consistency [EN 196-3: 2005]
3. 6.07 Density
[ASTM C188-09]
4. 6.08 Fineness
[EN196-6: 2010]
Manhole tops and gully tops
1. 15.01/15.02 Manhole, Gully, Grating tops [EN124:1994 & DSSOPT additional requirements]
Geotextile and Geodrain
2. 14.01 Mass per unit area of geotextile [ASTM D 5261-03] [EN 965-1995]
3. 14.02 Wide Width strip tensile test of geotextile [ASTM D4595-05] [ISO 10319; 2008]
4. 14.03 Grab breaking load and elongation of geotextiles [ASTM D4632-03]
5. 14.04 Trapezoid tearing strength of geotextiles [ASTM D 4533-04]
6. 14.05 CBR punch test [ISO 12236: 2006]; [BS 6906-4:1989]
7. 14.06 Tensile test of geordrain [In-house test method]
Hardened Concrete
1. 3.12 As received, SSD saturated surface dry, dry density [ISO 1920-5:2004]
2. 3.13 Water absorption test [BS 1881; Part 1221:2011]
3. 3.15 Compressive test [BS 1881: part 120; 1983] [AMD 6109 1989]

4. 3.20 Dept of penetration of water under pressure [ISO 1920-5:2004]


5. 3.34-3.38 Core extraction of concrete kerbs
[EN12504-1:2000 /ISO 1920-6:2004]
Coatings
1. 11.01 Dry film thickness test [ISO 1461:1999, ISO 2178: 1995, ISO 2360:2003, ISO 2808: 2007]
2. Adhesion test [ISO 2409:2007] [ ISO 4624:2002]
Aggregate for concrete
1. 5.01 Sieve analysis [ASTM C 136-06; BS812-103:1990; GB/T 14684-2001; GB/T 14685-2001]
2. 5.02 Specific gravity and water absorption [ASTM C127-07, ASTM C128-07a]
3. 5.04 very fine particle content and soluble material [ASTM C117-04]
4. Elongation index [ BS 812: Section 105.2: 1990]
5. Flakiness index [BS 812: Section 105.2: 1990]
6. Abrasion by Los Angeles Machine [ASTM C 131-06,C535-09]
7. Potential reactivity Mortar Bar method[ASTM C1260-07]
8. Aggregate crushing value (ACV) [BS 812-110:1990;]
9. 10% fines values (TFV) [BS 812-111:1990]
Concrete Cube [ISO 1920-4:2005]

Das könnte Ihnen auch gefallen