Beruflich Dokumente
Kultur Dokumente
TiLex EG
Epoxy Tile Grout
DESCRIPTION
TiLex EG is a three component epoxy tile grout based on high grade polyamine resin. It
provides good chemical resistance, antifungal and antibacterial properties.
STANDARDS
USES
TiLex EG is suitable for tile joint grouting in hospitals, bathrooms, kitchens, chemical
spillage rooms, laboratories, swimming pools, etc.
ADVANTAGES
TEST METHOD
VALUE
Component
Mixed Form
Paste
Colour
Open Time
Full Cure
30 mins
7 days
Compressive Strength
Tensile Strength
BS 6319-2
75 N/mm at 7 days
BS 6319-7
15 N/mm at 7 days
BSEN 12003
Flexural Strength
BS 6319-3
Chemical Resistance
ASTM D543
SURFACE PREPARATION
Joints to receive grout should be dry, clean, free from standing water, grease, loosely
adhering particles, etc. Cement laitance should be removed by mechanical means.
MIXING
Mix Part A with Part B using a slow speed drill machine fitted with a mixing paddle, for 2-3
minutes. Add Part C and continue mixing until a uniform consistency is achieved.
CC/TL04/Ver6/01/11
1/2
Technical Datasheet
Construction Chemicals
TiLex EG
APPLICATION
Mixed TiLex EG should be worked into the tile joints using a spatula. It is
recommended to use masking tape around the edges of the tiles to avoid any spillage.
Excess grout material can be removed with the use of a cloth or sponge along with a
suitable solvent. Removal of excess material should be carried out before hardening
of the applied grout.
PACK SIZE
5 ltr set
COVERAGE
Tile size (w x b)
mm
Tile thickness
mm
Joint width
mm
Grout consumption
ltr/m
200 x 200
0.370
400 x 500
0.170
GENERAL INFORMATION
TECHNICAL SERVICE
Shelf Life
Cleaning
PPEs
Precautions
Hazardous
Disposal
Additional Information
CONMIX Technical Services are available on request for onsite support to assist in the
correct use of its products.
Manufacturer:
CONMIX LTD.
P.O. Box 5936, Sharjah
United Arab Emirates
Tel: +971 6 5314155
Fax: +971 6 5314332
Email: conmix@conmix.com
Sales Office:
Tel: +971 6 5682422
Fax: +971 6 5681442
www.conmix.com
It is the customers responsibility to satisfy themselves by checking with the company whether information is still current at the time of use. The customer must be satisfied that the
product is suitable for the use intended. All products comply with the properties shown on current data sheets. However, Conmix does not warrant or guarantee the installation of the
products as it does not have any control over installation or end use of the product. All information and particularly the recommendations relating to application and end use are given in
good faith. The products are guaranteed against any manufacturing defects and are sold subject to Conmix standard terms and conditions of sale.
CC/TL04/Ver6/01/11
2/2
Technical Datasheet