Beruflich Dokumente
Kultur Dokumente
Power sources
Technical support
Refer to the “Yellow Pages” of this
catalog for:
• Safety instructions
• Basic hydraulic information
• Advanced hydraulic technology
• FMS (Flexible Machining Systems)
technology
• Conversion charts and hydraulic
symbols
113
74 © 2006
▼ series ▼ page
www.enerpac.com © 2006 75
Turbo II air-hydraulic pumps Application & selection
Shown: PAMG-5402PB, PACG-3102PB, PATG-3102PB, PATG-5105PB
Quick and powerful hydraulic supply in an
economical air-powered unit
Swing cylinders
Work supports
operation
• Composite air piston seal allows operation on completely dry
Turbo II air-hydraulic pumps generate the
air supply
hydraulic pressure you need, using the air pressure
you have available. The air saver piston reduces air
consumption and operating costs. Select the required operation
They are ideal for providing the power and speed
PATG series PACG series
desired in simple clamping circuits. Turbo II air-
• Momentary (air-inlet) treadle • Momentary or continuous
hydraulic pumps are best suited to medium and for operation of single acting air inlet treadle
cylinders
lower cycle applications. At only 75 dBA, these new • Remote valve is required to
• Provides advance, hold and operate single-acting
Turbo II series help to keep noise level to a retract functions cylinders
minimum. • Pressure gauge included
PARG series
Select the required output • Includes 4,5 m air pendant
for remote control of
3000 series single-acting cylinders
• Hydraulic-air ratio 45:1 (350 bar hydraulic pressure • Provides advance, hold
at 8 bar air pressure) and retract functions
• Hydraulic pressure range 85 - 350 bar (range of
35 - 85 bar available with diminished stall/restart
performance)
• Maximum hydraulic oil flow 3,0 l/min Output Oil Flow versus pressure
3000 series – Flow vs hydraulic pressure 5000 series – Flow vs hydraulic pressure
5000 series 3,00 2,00
7,0 bar 7,0 bar
• Hydraulic-air ratio 60:1 (350 bar hydraulic pressure 2,50 5,5 bar 5,5 bar
1,60
at only 5,5 bar air pressure) 4,0 bar 4,0 bar
Oil flow (l/min) ➔
performance) 0,80
1,00
• Maximum hydraulic oil flow 2,0 l/min 0,50 0,40
0 0
0 100 200 300 400 0 100 200 300 400
Hydraulic pressure (bar) ➔ Hydraulic pressure (bar) ➔
76 © 2006 www.enerpac.com
Dimensions & options PA series
PATG series P T Oil Flow: 2,0-3,0 l/min
1 3/8"NPTF 2 G1/4" 4 1/4"NPTF
Pressure: 85 - 350 bar
219
Air: 340 l/min
176
203
165
139
121
151
Reservoir: 2,4 - 5,0 litres
5 8 6
178 38 320 8
30 254 347 E Bombas hidroneumáticas
F Pompes hydro-pneumatiques
PACG series PACG series include pressure gauge G-2517L.
P T D Lufthydraulische pumpen
3/8"NPTF 1 2 G1/4"
1/4"NPTF 3 4 1/4"NPTF
244
203
176
165
180
160
146
121
Options
Power sources
8 6
5 178 38 G1/4" 8 Large reservoir models
30 254 320 Enerpac Turbo
air-hydraulic
PASG series A B pumps are also
M5x11 3/8"NPTF 1 G1/4" 2 CETOP03 4 1/4"NPTF
available with
large reservoir.
B
Valves
Usable oil capacity
203
165
176
36
180
161
148
121
201
components
71
System
PAMG series AB 396
3/8"NPTF 1 2 G1/4" 4 1/4"NPTF
To order your Turbo II with a
275
160
36
148
121
Yellow pages
5 8 6
178 38 8
Gauges and
30 254 320
accessories
PARG series
3/8"NPTF 1 2 G1/4" 4 1/4"NPTF 7 1/4"NPTF P T 106
Regulator-
filter-lubricator
208
203
176
165
139
121
97
8
8 6
5 30
178
254
38
320 4500
Important
1 Auxiliary vent/tank fill port 4 Swivel air input with filter For high cycle applications
2 Hydraulic output 5 Filtered permanent tank vent electric pumps are
recommended.
3 Gauge mounting port 6 Adjustable pressure relief valve
7 Air pendant air input
Product Selection
Pump 3000 series Oil flow 1) 5000 series Oil flow 1) Max. Reservoir Usable Air Air
type Model 3000 series Model 5000 series hydraulic size 2) oil capacity 2) pressure consumption
Number Number pressure range
litres
hor. vert.
l/min l/min bar litres mount. mount. bar l/min kg
PATG PATG-3102PB 3,0 PATG-5102PB 2,0 350 2,4 2,1 1,1 1,7-8,6 340 8,6
PACG PACG-3002PB 3,0 PACG-5002PB 2,0 350 2,4 2,1 1,1 1,7-8,6 340 8,6
PASG PASG-3002PB 3,0 PASG-5002PB 2,0 350 2,4 2,1 1,1 1,7-8,6 340 8,6
PAMG PAMG-3402PB 3,0 PAMG-5402PB 2,0 350 2,4 2,1 1,1 1,7-8,6 340 11,3
PARG PARG-3102PB 3,0 PARG-5102PB 2,0 350 2,4 2,1 1,1 1,7-8,6 340 10,5
1) At 0 bar hydraulic and 7 bar air pressure.
2) TurboII air-hydraulic pumps are also availble with 5 litres reservoir.
To order replace 2 in model number with 5. © 2006 77
Electric Driven Workholding Pumps Application & Selection
Shown: ZW5111SWE100
Customize to your needs
Swing cylinders
Work supports
02_003
Application 2,0
These advanced workholding pumps, operating at
Oil flow (l/min) ➔
maximum 350 bar hydraulic pressure, are highly 1,5
Product selection
Oil Pressure Voltage Usable Valve Model
Flow Range and oil models number
rate current capa- included
50Hz city 2)
l/min bar V@A litres kg
▼ With manifold for VP-series modulair valves, no electric controls
1,64 100-350 230 @ 3,3 10,0 – ZW5VPSEE100 65
1,64 100-350 400 @ 1,9 10,0 – ZW5VPSWE100 65
▼ With manifold for CETOP 03 valves, no electric controls
1,64 100-350 230 @ 3,3 10,0 – ZW5C03SEE100 65
1,64 100-350 400 @ 1,9 10,0 – ZW5C03SWE100 65
▼ For 2x Single-Acting circuits
1,64 100-350 230 @ 3,3 10,0 1x VP-41 ZW5141SEE100 77
1,64 100-350 400 @ 1,9 10,0 1x VP-41 ZW5141SWE100 77
▼ For 1x Double-Acting circuits + Isolating Valve 1)
for A-port
1,64 100-350 230 @ 3,3 10,0 1x VP-11 ZW5111SEE100 77
1,64 100-350 400 @ 1,9 10,0 1x VP-11 ZW5111SWE100 77
▼ For 2x Double-Acting circuits + Isolating Valves 1)
for all A-ports
1,64 100-350 230 @ 3,3 10,0 2x VP-11 ZW5211SEE100 80
1,64 100-350 400 @ 1,9 10,0 2x VP-11 ZW5211SWE100 80
1)
Isolating Valve is Pressure Switch PSCK-8.
2)
ZW5-series pumps comes standard with 10 litres reservoir. (4, 8, 20 or 40 litres
78 © 2006 reservoir is optional).
Dimensions & options ZW5 series
Flow: 1,64 l/min
Motor: 1,1 kW
ZW5-series Shown: ZW5211SEE100 with standard 10 litres reservoir Reservoir: 4 -40 litres
Power sources
555
533
290
5
155 Options
6 VP-series,
419 (10 ltr) 305 modular valves
Valves
447 384 (10 ltr)
88
Pressure gauge Directional valve
Pressure switch Oil level glass VFC-3 Inline
Tie Rod Kit Oil drain Flow control
valve
components
Product specifications 89
System
Pump Voltage Phase Continous Motor Motor Motor Sound Pressure
series operation capacity speed protection Level
at class
switches
350 bar
89
Volt kW RPM dBA
Hoses and
Yellow pages
ZW5.... 230 1 50% 1,1 1390 IP54 75
ZW5..... 400 3 50% 1,1 1390 IP54 75 couplers
108
High pressure
Valve options filters
The VP-serie modular 109
directional valves with all its
VP-41 options, stackable up to 8 Fittings
stations high.
88-91
110
PSCK-8
Important
Oil should be replaced
every 500 working hours or
4 times a year whichever
comes first to ensure long
life.
VFC-3 PRV-1
Output flow rate should be
matched to hydraulic
PB-1 components used in the
system.
TRK-3
www.enerpac.com © 2006 79
Electric Driven Workholding Pumps Applications & Options
Shown: ZW5111SWE100
ZW5VPSEE100 with manifold for VP-series or CETOP Basic pumps
Swing cylinders
02_004
Power sources
ZW5 series
These advanced workholding
pumps, operating at maximum
350 bar hydraulic pressure, are
highly suitable for production
tooling applications – offering Isolating valves
ZW5111SEE100 For 1x Double-Acting circuit and
the optimum in terms of
Isolating Valve for A-port For applications where clamping
compact size for required oil
flow and pressure rating and PS 1 pressure has to be maintained,
customization to your specific isolating valves are an economic
needs. and safe solution.
VP-11
The pressure switch (PS 1)
Application switches in the hydraulic line to
the cylinder actuates the valve
Enerpac electric pump used in
with a closed center position and
conjunction with swing
isolates the circuit when the
cylinders, work supports,
preset pressure has been reached.
directional valves, control valves G-2517L In case of pressure drop the
and sequence valves can
PS 0 switch opens the valve to
provide a complete clamping
compensate.
solution. The pressure switch
allows the unit to be fully
For some particular applications,
automated.
i.e. when a workpiece has to be
positioned and clamped with
different forces, you can set
different isolating valve pressures
for the independent circuits.
G-2517L
PS 0
02_005
80 © 2006 www.enerpac.com
Applications & Options ZW5 series
CSM-572 ZW5211SEE100 for 2x Double-Acting circuit and Flow: 1,64 l/min
Isolating Valve for all A-ports
SLRD-92 SLRD-92 Pressure: 100-350 bar
PS 1 PS 2 Motor: 1,1 kW
E Bombas eléctricas
F Centrale hydraulique
D Modulare Spannpumpe
MVPM-5 WFL-222
PS 0
G-2517L
Power sources
ZW5211SEE100
Options
Application example
Valves
Building the right workholding Sequence
system for a specific production valves
tooling requirement is best
92
achieved by observing the Basic
System Set-up in our “Yellow
Flow control
components
Pages” ( 113 ). valves
System
96
Hoses and
couplers
Yellow pages
Shown the electric scheme of
the ZW5211SWE100 (400 volt) High pressure
filters
for two double-acting circuits
and isolating valves (pressure 109
switches) in both A-lines.
Hydraulic oil
ZW5211SWE100
F1, 2A F3, 2A
~ 109
400V~
+
27V~
– CRI
~
Fittings
F2, 2A – 1
1 3 5 T1
F1
21 110
SO
22 1
13 1 23 13 23 VP-series
S1 S2
2 4 6 14 2 24 14 2 24 Valve options
PS2 88-91
1 3 5 PS1
6
5
4
KO
8
2 4 6
3
2 4 5 6 8 10 12
2 4
PS0
L1 L2 L3 U V W
3 7 9 11 13
M 3~ K0
– – – –
© 2006 81
Air hydraulic boosters Application & selection
Shown: AHB-46, B-5003, B-3006
For high production applications
Swing cylinders
Work supports
VA-42
Manual
control valve
RFL-102 Serie AHB
Air filter regulator Air hydraulic booster
Serie G
350 bar
gauge
V-19
Check valve
To hydraulic
system
RFL-102 V-19
98-010
82 © 2006 www.enerpac.com
Dimensions & options AHB/B series
AHB series – Oil pressure vs Air pressure B series - Oil pressure vs Air pressure Ratio: 1:16 - 1:64
350 350
Pressure: 110 - 350 bar
03
66
46
50
300
B-
B-
B-
AH
275 AH 34 Oil flow: 60-295 cm3/stroke
06
Oil pressure (bar) ➔
Power sources
AHB series
Options
Air Oil Gauge
connection reservoir G1/8" port Air valves
34 230
*
G3/8"
**
97
22
310
226
Valves
HF-series
113
G3/8"
57 1)
97
Hydraulic oil
39 220 209 12,7
25,4
1)
Fittings
Ø 71,9 mm for model AHB-17
components
System
* Oil connection (G1/4”) for model AHB-17
** Oil connection (G1/4”) for model AHB-34, -46, -66 110
*** Adaptor to 3/8” NPT air connection is included.
Important
B series
Boosters can provide high
Yellow pages
Air Oil fill Gauge oil flow rates based on the
connection port port volume of incoming air.
3/8 BSPT 1/2 BSPP 3/8 BSPP
Do not exceed the flow rate
requirements of the
components being used.
222
117
Stroke
sensor
ø 11 For vertical mounting of
71 216 156
booster, an elbow fitting is
121 183
recommended for the oil
484 238
reservoir.
Product selection
Oil pressure Oil volume Air to oil Model Air Air Hydraulic Hydraulic Air operating
per stroke pressure number consumption piston piston stroke pressure
bar ratio per cycle 1) diameter diameter
Intensifier principle
Power sources
99-055
PID series • When oil is supplied to the inlet (IN) • Free flow from the cylinder to tank
port it flows freely past the check occurs when the directional control
When hydraulic pressure from valves (CV) and the dump valve to the valve is switched to supply the R-port.
an existing power source is cylinder and advances it.
limited, Enerpac oil-to-oil
• As the inlet pressure increases the • A 10 micron filtration is essential in the
intensifiers serve to increase
oscilating pump (OP) automatically supply circuit to ensure trouble free
output pressure to satisfy the
increases the outlet pressure by the operation (see options).
required application. chosen intensification.
• Once the maximum pressure is
reached, the pump frequency lowers
and balances at the maximum
pressure.
PID series
Low
pressure
High
pressure
❚ PID-Series intensifier utilizes low
pressure machine hydraulics to To cylinder
power clamping cylinders.
Product selection
Maximum Pressure Maximum Maximum Model Inlet
output intensification input flow output flow number pressure
pressure ratio range
84 © 2006 www.enerpac.com
Dimensions & options PID series
System set-up information Ratio: 1 : 3,2 - 1 : 6,6
Low
pressure
Power sources
With external dump valve
E
In a circulating system where
the pump’s oil flow is higher
than the maximum inlet oil flow
of the intensifier, an external IN
check valve and flow control PID
valve reduces the pump’s oil R
flow.
Valves
This application can be set up
when machines are equipped Low
with low pressure hydraulics pressure
but the pressure to clamp the
workpiece must be higher.
Options
FL-series,
components
High pressure
System
filters
109
Directional
valves
Yellow pages
88
FZ-series
Fittings
110
27,8-28,0
R
M24x1,5
G1/4"
IN
10 micron inlet filtration is
essential to ensure trouble-
84,8-85,2 40,9 free operation.
109,8-110,2
© 2006 85
Valves
Technical support Valves
Refer to the “Yellow Pages” of this Valves – Controlling the operation of your clamping
catalog for:
system requires the use of many specialized
• Safety instructions
directional, pressure and flow control valves.
• Basic hydraulic information
• Advanced hydraulic technology Enerpac has the complete line of valving components
• FMS (Flexible Machining Systems) to complement any hydraulic system. Choose from
technology
electric directional valves and a wide variety of
• Conversion charts and hydraulic
symbols pressure control, flow control and specialty valves to
86 © 2006
▼ series ▼ page
PSCK
Pressure switches, Flow control valve 89
VFC
TRK
Tie rod kits, Remote/porting manifolds 90
WM, PB
MVPM
Sequence valves 92
V
MH, HV
Accessory valves 94 - 95
PLV, V
VA, VR
Air valves and accessories 97
RFL, QE
www.enerpac.com © 2006 87
Modular directional valves VP series
Shown: VP-11
Solenoid directional valves Pressure: 350 bar
Swing cylinders
Work supports
VP-series Options
Solenoid directional valves PB-1 Auxiliary
control the direction of the oil block
flow to each cylinder port. VP series
90
Application
Valves
Flow control
G1/4" ports at both Oil flow vs pressure drop
sides for VFC-3 10
A B
28
40
9
8
Pressure drop (bar) ➔
60
12
7
92 6
5
4
3
2
1
0
0 1 2 3 4 5 6 7 8
Oil flow (l/min) ➔
Flow Path 1)
VP-11
Product selection
❚ Enerpac VP-series valves Voltage @ current Model Used
stackbuilded on a workholding number with VP-21
cylinder(s)
pump.
at 50/60 Hz
@ 1,13 Amps
▼ 4/3 Closed centre VP-31
24 VDC @ 1,13 A VP-11 1x DA / 2xSA
▼ 4/3 Float centre
24 VDC @ 1,13 A VP-21 1x DA / 2xSA
VP-41
▼ 3/2 Normally closed
24 VDC @ 1,13 A VP-31 1x DA / 2xSA
▼ 3/2 Normally open
24 VDC @ 1,13 A VP-41 1x DA / 2xSA VP-51
▼ 3/2 one port normally open, one port normally closed
99-030
88 © 2006 www.enerpac.com
Pressure switches, Flow control valve PSCK, VFC series
Shown: PSCK-8, VFC-3
Pressure: 350 bar To control your
Flow: 7 l/min @ 350 bar
hydraulic system
Voltage: 24 VDC • Mounts directly into VP-series modular valves
• In-line installation
E Presostatos
• Cartridge type flow control valve and pressure
F Pressostats switches can be manifold mounted for remote
D Druckschalter use
• Lockable adjustment screw on PSCK models
A B
99-020
PSCK-8, 9 Mounting dim.
6,0
40,0 75,0 M4
valves will open or close electrical
contacts when the desired
9,0
96 pressure value is reached.
ø 3,0-5,0
61,0
Valves
Pressure Application
reducing
To open or close an electric
13,0
valves
28,0
91 circuit when a preset pressure
28,0 value is reached. The electrical
min. 35 circuit is used to control further
working cycles, such as
components
actuating control valves or to
System
VFC-3 Back pressure vs flow return
terminate a working cycle.
10 VFC-3 VFC-3 Mounting dimensions
Directly mounted into Enerpac
Flow direction B-A
8 118° VP-series valves.
Back pressure (bar) ➔
M8x1
Yellow pages
4 1,6
M8x1
Screw-in throttle type valve to
18,0-19,0
max. ø5,0
min. 25,0
2
15,0
▼ Pressure switch
valve
© 2006 89
Tie Rod Kits, Remote/Porting Manifolds TRK, WM, PB-series
Shown: WM-10, TRK-4, PB-1
Simplifies valve and Mounting: 1-8 VP valve stations
Swing cylinders
accessory mounting
Work supports
Flow: 15 l/min
TRK-series Tie Rods
• Connects 1 to 8 VP-series valves E Pernos de montaje de válv.
• Provide leak-free sealing valves
F Vis de montage de distrib.
Linear cylinders
TRK-series
• G1/4” oil connection Options
Tie Rod Kits mount Enerpac VP- Pressure
series modular valves to the switches
WM-10 manifold or pump
mounted manifold and can 89
TRK
accommodate one to eight VP- Endplate
Valves
M6
25
40
40
PB-1
12
40
18
R
between VP-series modular P
valve stations using TRK-series 14 34
tie rod kits. 46 92
92
6 TRK-6 285 M6 1
3x G /4” PB-1 350
M3 P
7 TRK-7 325 M6 M5
99-035
8 TRK-8 365 M6
90 © 2006 www.enerpac.com
Pressure reducing valves PRV series
Shown: PRV-1
Pressure: 350 bar Precise control of
Flow: 7 l/min
hydraulic pressure
99-021
Options
VP-Modular PRV-series
valves
These valves regulates system
88 pressure for all subsequent
valves, according to the
Pressure adjusted pressure. Maintains a
switches constant pressure in a
Valves
secondary circuit. Includes a
89 check valve that prevents
pressure drop on secondary
Tie rod kits side.
90 Application
components
Used when a hydraulic supply
System
Fittings with a higher pressure (primary
side) must also be used for
another circuit with a lower
110 pressure (secondary circuit).
Yellow pages
between VP-series valves.
PRV-3 is for remote mounting.
PRV-1 The cartridge from PRV-3 can
be removed from manifold for
PRV-3
direct integration into gundrilled
Adjustable fixture.
193
pressure
reducing valve
Port for
pressure
153
switch
12
40
PSCK-8, -9
G1/4"
16
G1/4"
16
92
8,4
38
50
G1/4" 12 16
34 35 50
Product selection
Mounting Adjustable Maximum Built-in Model Oil Maximum
style pressure pressure adjustable number ports oil flow
range pressure
relief valve
© 2006 91
Sequence valves MVPM, V-series
Shown: MVPM-5
Pressure dependent Pressure: 350 bar max.
Swing cylinders
sequence control
Work supports
V-2000
• Direct accurate pressure setting P A
operated Options
Sequence valves Gauges
Sequence valves block the oil to
a secondary hydraulic circuit 106
until pressure in the primary
circuit reaches a preset level.
The sequence valves have a MVPM-5 Pressure drop vs oil flow
Valves
ports
35
34
50
P
65
19
26,5
12,5
13 28,5
MCA-series Auto Coupler to A 37
provide system automation. 50
79
87 60
Product selection
Pressure Maximum Maximum Model Oil ports Opening
adjustment pressure oil flow number pressure
range check valve
99-109
Options
Fittings MV-series
Pilot operated check valves
110 check the oil flow with a built-in
pilot circuit providing fast,
automatic check-off for your
Product selection workholding applications.
Valves
Pilot Accumulator Maximum Maximum Model Oil ports Optional
The pilot operated check valves
ratio included oil flow pressure number charging with built-in accumulator help to
tool for maintain system pressure due to
ACL
minor oil loss.
l/min bar kg
7 : 1 – 38 350 MV-72 G 1/4” – 1,8 Application
components
Added capability to open with
System
7 : 1 ACL-22 38 350 MV-722B G 1/4” WAT-2 2,7
7 : 1 ACL-202 38 350 MV-7202B G 1/4” WAT-2 3,4 pilot pressure to allow cylinders
7 : 1 – 38 350 MVM-72 G 1/4” – 1,4 to retract. By using a pilot
For more information on ACL-series Accumulators see page 104. operated check valve, cylinder
retraction can be accomplished
automatically without operator
MV-722B, -7202B MV-72 MVM-72 activity.
Yellow pages
K E A
G L F G F
28,4
P
A B H A
z 7,9
G
Manifold 73,2
B ports 50,8
ø 4,75-4,93 28,7
A D B C
z A
C B C
28,7 P
D
A
D E
L K
M K L
H P z
H B A G
G F
E
Product dimensions in mm [ ]
Model A B C D E F G H K L M
number
MV-72 89,0 63,5 55,6 7,1 73,2 28,7 G1/4” 31,8 50,8 73,2 –
MV-722B 89,0 71,1 184,2 7,1 73,2 28,4 G1/4” 31,8 73,2 50,8 145
MV-7202B 89,0 92,4 181,1 7,1 73,2 28,4 G1/4” 31,8 73,2 50,8 185
MVM-72 89,0 63,5 38,1 7,1 28,7 28,4 G1/4” 31,8 44,5 73,2 –
Seal material: Buna-N. Manifold O-rings included with MVM-72. For manifold mounting installation information consult
Enerpac for surface preparation.
© 2006 93
Accessory valves Application & selection
Shown: HV-1000A, V-17, V-10, V-12, V-152
Your hydraulic control solution
Swing cylinders
Work supports
Product selection
Valve type Maximum Model Oil
pressure number ports
99-086
Power sources
MHV-1 P
❚ V-17 Safety check valve installed on a fixture. Modular holding valve
• Allows separate operation of clamping A
fixtures with a single power source
• Ideal for applications when 129
fluid feed lines are 19
impractical. If system 7,1
presssure is interrupted,
the MHV-1 will hold the
35
35 27NPT
94 © 2006 www.enerpac.com
Dimensions & options MH, HV, PLV, V-series
Pressure: 0 - 700 bar
38
clamps D Regelventile
• When pressure build-up reaches a preset level, Adjustable pressure screw
the valve closes, stabilizing pressure to that
section of the fixture 41,5
P
7,1
• Pressure adjustment between 14 - 105 bar P A
38
19
• Max. oil flow 5 l/min
A
1/8"-27NPT (2x) 30,5
on a fixture
• Viton seals standard
Valves
• Straight through design for easy system 35
12
components
V-10 Auto-damper valve
System
38
28
• To protect gauge during high
cycle applications
38
Yellow pages
• Fits directly into GA-series gauge adaptor 1/2" -14NPT
VA-42
Air valve
97
V-17 Safety check valve
101
• Ruggedly built to resist shock Gauges and
and operate with low adaptors
31
pressure drop
3/8" -18NPT 106
• Closes smoothly without pounding
• Max. oil flow 30 l/min Hoses and
couplers
108
113
© 2006 95
Flow control valves VFC-series
Shown: VFC-1, VFC-2
Regulate the flow of oil Max. Flow: 38 l/min
Swing cylinders
Work supports
Options
VFC-series Fittings
Provide repeatable oil flow
control. The internal check valve 110
allows metered flow in one
direction and free flow in the High pressure
opposite direction. Precise filters
Valves
70
60
72
65
50
40
30
20
25
A B
38 0 - 350 G 1/4” VFC-2 105 0,8
99-041
96 © 2006 www.enerpac.com
Air valves and accessories V, RFL, QE-series
Shown: VA-42, VAS-42
Air Pressure: 0 - 10 bar To control and regulate air supply
E Válvulas de aire
F Valves à air VA-42 Manual operated air valve, 5-way, 2-pos.
D Luftventile • For control of boosters
• Viton seals standard
VAS-42 Solenoid operated air valve 5-way, 2-pos.
• For control of pump and boosters air supply
• Viton seals standard
• Solenoid: 120 VAC, 50/60Hz
Amperage: inrush 0,11 Amp, holding 0,07 Amp
Options • Maximum cycle rate: 600 cycles per minute
99_110
Gauges and VR-3 Rapid exhaust valve
adaptors • Enables booster to advance and retract faster
Air valves
106 • Instantly exhaust air supply from booster to
Enerpac’s line of directional air
atmosphere
Hoses and valves and accessories
couplers V-19 Air check valve complete your workholding
• Prevent rapid drop of air pressure to the booster system. Used to control air
108 operated hydraulic units, they
Valves
in the event of sudden loss of input air
increase your productivity and
Fittings RFL-102 Regulator-Filter-Lubricator efficiency.
• Regulates air pressure
110 • Filter air input Application
• Lubricates air motors with a fine oil vapor mist
VA-series directional air valves
components
• Maximum air flow 1500 l/min provide either manual or electric
System
QE-375 Air/Noise silencer control to air operated hydraulic
units. Accessories such as rapid
• Reduces noise level of exhaust air from pump to
exhaust, check valves, silencers
45 dBa and regulators complete the air
control system.
Yellow pages
• Accessory valves provide
VA-42 6,3
57
VAS-42 57 greater safety and more
6,3
25,4
25,4
51
3/8"-18NPT (5x)
102
V-19 VR-3
Product selection 98 3/8"-18NPT (3x)
Maximum Model
32
60
pressure number
3/8" -18NPT
74 60
0-7 VR-3
241
© 2006 97