Beruflich Dokumente
Kultur Dokumente
Safety Classification
PLe per ISO 13849-1, SIL 3 per IEC 61508 and IEC
62061, PDF-M per IEC 60947-5-3
Certifications
Safety Ratings
Operating Characteristics
The TLS-ZR GD2 and TLS-ZL GD2 are additions to the existing TLS GD2
range of guard locking switches. The TLS-ZR GD2 is a power-to-release
and the TLS-ZL GD2 is a power-to-lock unit. They may be used as part of a
guard locking system to achieve performance Level "e" to EN/ISO 138491. They are certified by the TV as meeting EN/ISO 13849-1. In mechanical
configuration they are identical to the existing TLS-GD2 range with the
exception that they include an additional RFID door target which is
mounted close coupled with the supplied fully-flexible actuator.
TLSZR-GD2
Power to release
TLSZL-GD2
Power to lock
The TLS-GD2 range are positive mode, tongue operated, guard locking
interlock switches that can lock a machine guard closed until power is
isolated and ensure that it remains isolated while the guard is open. The
TLS-ZR GD2 and TLS-ZL GD2 head has two entry slots and it can be
rotated to provide three actuator entry points. A blanking plug is
provided to seal the unused slot. The TLS-ZR GD2 is a power-to-release
switch, the guard may only be opened when a logic signal is applied to
the switch after which the internal microprocessor will enable the internal
solenoid, which releases the lock mechanism. The TLS-ZL GD2 is a powerto-lock switch, the guard will be locked when a logic signal is applied to
the switch after which the internal microprocessor will enable the internal
solenoid, which engages the lock mechanism.
Two manual release points with security screws allow the locked switches
to be released in emergencies. An optional lid-mounted key-release style
can also be supplied. Each switch has semiconductor OSSD safety
outputs that may be connected in series with other safety components
that also have OSSD solid-state outputs (for example, the SensaGuard
range of non-contact switches). A stainless-steel actuator guide is fitted
to protect the unit from actuator damage due to poor guard alignment or
guard wear. TLS-Z GD2 has an ingress protection rating of IP69K making
them suitable for harsh washdown applications as found in the food and
beverage, pharmaceutical, solar, and semiconductor industries.
Features
200 mA
Current Consumption
100%
Unlimited
Operating Voltage Ue
Operating Frequency
1 Hz
Response Time
Utilization Category
250V
Pollution Degree
Protection Type
Mechanical Life
1 x 106 cycles
80 mm (3.15 in.)
Environmental
Enclosure Type Rating
-10+60 (14140 )
Relative Humidity
595%
Shock
IEC 68-2-27 30 g 11 ms
Vibration
Frequency
Physical Characteristics
Housing Material
Actuator Material
Stainless steel
Target Type
Weight [g (lb)]
400 (0.88)
Color
Red
IMPORTANT
1-
Description
2-Opto-electronics
Auxiliary Outputs
3-Interlock
Swtiches
Safety Outputs
Usable for ISO 13849-1:2006 and IEC 62061. Data other than B10d is based on:Usage rate of 1op/10 min., 24 hrs/day, 360 days/year, representing 51840
operations per year- Mission time/Proof test interval of 30 years
Safety Switches
Target Alignment
Marks
Cat. No.
TLS-Z GD2
Switch
Target
Actuator
Accessories
Description
Cat. No.
Target
2-Opto-electronics
3-Interlock
Switches
440G-ATZA
440G-A27143
Cover for TLS-1 with external override key for series E and
later
440G-A27371
Cover for TLS-1 with override key attached for series E and
later
440G-A27373
440G-A36026
440G-A27356
440G-A27357
Dust cover
440K-A17183
4
5
2
Safety Switches
5 (0.2)
17
(0.67)
6.5 (0.26)
Status/
M5 x 4
Diagnostic
LED
1-
21 (0.83)
19
(0.75)
73 (2.87)
86 (3.39)
23.2 (0.91)
57 (2.24)
11.9
(0.47)
22 (0.87)
27 (1.06)
39 (1.54)
9 (0.35)
6.5 (0.26)
3 (0.12)
25.5 (1)
20.5 (0.81)
17 (0.67)
14 (0.55)
33 (1.3)
5 (0.2)
5 (0.2)
5.5 (0.22)
21
(0.83)
126 (4.96)
105 (4.13)
14 (0.55)
6 (0.24)
43 (1.69)
2-Opto-electronics
31.5 (1.24)
52.5 (2.07)
60.5 (2.38)
67.5 (2.66)
14.5 (0.57)
3 (0.12)
29.3 (1.15)
M5
6.5 (0.26)
440G-ATZAExxxx
4 (0.16)
20
(0.79)
5.5
(0.22)
14
(0.55)
2 x M3
24
(0.94)
8 (0.31)
20 (0.79)
6.8 (0.27)
4 x 5.5
31 (4.22)
40 (1.57)
52 (2.05)
51 (2.0)
13 (0.51)
19 (0.75)
18
(0.71)
3-Interlock
Switches
7
(0.28)
2.2 (0.09)
4.2 (0.17)
19.2 (0.76)
Color
Function
No. of Pins
3 Lock Command
2 24V DC+
4 Safety B+
8 Safety A+
1 Aux
7 0V
5 Safety A
Aux
Brown
24V DC+
Green
Lock
Yellow
Safety B+
Grey
Safety A
Pink
Safety B
Blue
Gnd/0V
Red
Safety A+
6 Safety B
White
Replace the symbol with 2 (2 m), 5 (5 m) or 10 (10 m) for standard cable lengths.
Safety Switches
Notes
?
2-Opto-electronics
3-Interlock
Switches
4
5
4