Beruflich Dokumente
Kultur Dokumente
Title page
Alcatel-Lucent 9353
Wireless Management System | UA08.1
Activation of VAM for Power Balancing
NN-20500-311
Issue 1.12 | January 2013
Alcatel-Lucent Proprietary
Use pursuant to applicable agreements
Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective
owners.
The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
Copyright 2013 Alcatel-Lucent. All rights reserved.
Contains proprietary/trade secret information which is the property of Alcatel-Lucent and must not be made available to, or copied or used by anyone outside
Alcatel-Lucent without its written authorization.
Not to be used or disclosed except in accordance with applicable agreements.
Alcatel-Lucent Proprietary
Use pursuant to applicable agreements
Contents
About this document
Purpose
............................................................................................................................................................................................. xi
xi
........................................................................................................................................................................ xi
xi
....................................................................................................................................................................... xi
xi
Intended audience
....................................................................................................................................................................... xii
xii
Supported systems
...................................................................................................................................................................... xii
xii
........................................................................................................................................................ xii
xii
.................................................................................................................................................................................. xii
xii
Conventions used
........................................................................................................................................................................ xii
xii
....................................................................................................................................................................... xiv
xiv
Introduction to VAM
Overview ...................................................................................................................................................................................... 2-1
2-1
About VAM ................................................................................................................................................................................. 2-2
2-2
VAM matrix
................................................................................................................................................................................ 2-3
2-3
............................................................................................................................................... 2-6
2-6
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
iii
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Contents
....................................................................................................................................................................................................................................
......................................................................................................................................................................... 3-5
3-5
................................................................................................................................................................................... 3-11
3-11
................................................................................................................................... 3-12
3-12
......................................................................................................................................... 4-3
4-3
............................................................................................................................................................... 4-15
4-15
.......................................................................................................................................... 4-19
4-19
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
iv
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Contents
....................................................................................................................................................................................................................................
Configuring VAM
Overview ...................................................................................................................................................................................... 5-1
5-1
Setting activation flags and VAM parameters
Overview ...................................................................................................................................................................................... 5-2
5-2
Activating flags
......................................................................................................................................................................... 5-3
5-3
................................................................................................................................................................................... 5-16
5-16
................................................................................................................................................................................... 5-25
5-25
..................................................................................................................................... 6-2
6-2
Index
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
v
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Contents
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
vi
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
List of tables
1
List of terminologies
.................................................................................................................................................. xii
xii
3-1
3-2
Task sequence
3-3
Activation duration
3-4
7-1
....................................................................................................................... xiii
.......................................................................................................... 3-4
........................................................................................................................................................... 3-10
3-10
................................................................................................................................................. 3-10
3-10
............................................................................................................................... 7-4
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
vii
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
List of tables
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
viii
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
List of figures
1-1
Documentation roadmap
......................................................................................................................................... 1-3
2-1
2-2
2-3
Coefficient values for the first transmitter branch failure ........................................................................... 2-4
2-4
2-5
VAM architecture
...................................................................................................................................................... 2-7
2-7
3-1
VAM in STSR-1M
.................................................................................................................................................... 3-7
3-7
3-2
VAM in STSR-2M
.................................................................................................................................................... 3-8
3-8
3-3
VAM in STSR-3M
.................................................................................................................................................... 3-9
3-9
4-1
4-2
4-3
4-4
4-5
4-6
5-1
5-2
5-3
5-4
Configuring BTSCell
5-5
5-6
5-7
Configuring RFCarrier
5-8
............................................................................................................................................ 2-3
................................................................................................................................................... 2-4
2-4
..................................................................... 2-5
.............................................................................................................. 4-8
................................................................................ 4-11
.............................................................................. 4-13
................................................................................................................................. 4-20
........................................................................................................... 4-22
.......................................................................................................................... 5-9
............................................................................................................................................. 5-11
5-11
............................................................................................................................ 5-12
.......................................................................................................................................... 5-15
....................................................................................................................... 5-19
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
ix
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
List of figures
....................................................................................................................................................................................................................................
5-9
5-10
..................................................................................................... 5-24
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
x
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Purpose
The purpose of this document is to describe the procedures for configuring Virtual
Antenna Mapping (VAM) to balance power allocation if the NodeB configuration uses
two Power Amplifiers (PA).
Reason for reissue
Issue date
1.12
January 2013
Standard issue
1.11
November 2012
Standard issue
1.10
October 2012
Standard issue
1.09
August 2012
Preliminary issue
1.08
June 2012
Preliminary issue
1.07
March 2012
Preliminary issue
1.06
March 2012
Preliminary issue
1.05
November 2011
Preliminary issue
1.04
September 2011
Preliminary issue
1.03
September 2011
Preliminary issue
1.02
August 2011
Preliminary issue
1.01
July 2011
Draft issue
This is a new document created for the feature 118927, PA power balancing with VAM.
Other Changes:
Modified Configuring BTSCells (p. 4-10).
...................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
xi
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Updated roadmap.
Intended audience
This document applies to Alcatel-Lucent W-CDMA UA08.1 system release and the
following systems:
Start with the first chapter and then perform the relevant procedures in chapter two as
required.
Prerequisites
Before performing this procedure, ensure that you have the required knowledge of the
network, the configuration, and the provisioning principles.
Conventions used
Vocabulary conventions
Table 1, List of terminologies (p. xii) describes the terms used in this document.
Table 1
List of terminologies
Terminology
Description
Adder
Coefficient
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
xii
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Table 1
List of terminologies
(continued)
Terminology
Description
STSR
Typographical conventions
Table 2, List of typographical conventions (p. xiii) lists the typographical conventions
used in this document.
Table 2
Appearance
Description
italicized text
Emphasized information
variable
key name
command-syntax
input text
output text
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
xiii
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Related information
For information on subjects related to the content of this document, see the documents
listed in Table 3, List of related resources (p. xiv).
Table 3
At this location
http://support.alcatellucent.com
http://support.alcatellucent.com
http://support.alcatellucent.com
Technical description of
Alcatel-Lucent Remote
Radio Head 60W.
http://support.alcatellucent.com
Contact Alcatel-Lucent
Customer Support team
Multi-path diversity
transmission scheme,
demodulation, and
simulation.
Document support
For support in using this or any other Alcatel-Lucent document, contact Alcatel-Lucent at
one of the following telephone numbers:
Technical support
For technical support, contact your local Alcatel-Lucent customer support team. See the
Alcatel-Lucent Support web site (http://www.alcatel-lucent.com/support/) for contact
information.
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
xiv
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
How to order
To order Alcatel-Lucent documents, contact your local sales representative or use Online
Customer Support (OLCS) (http://support.alcatel-lucent.com).
How to comment
To comment on this document, go to the Online Comment Form (http://infodoc.alcatellucent.com/comments/) or e-mail your comments to the Comments Hotline
(comments@alcatel-lucent.com).
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
xv
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
xvi
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
1oadmap to configuration
R
management
documentation
Overview
Purpose
The purpose of this chapter is to provide the list of documents available for the W-CDMA
configuration management module.
Contents
Roadmap to configuration management documentation
1-2
...................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
1-1
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
Figure 1-1, Documentation roadmap (p. 1-3) illustrates where this document stands
within the customer documentation portfolio.
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
1-2
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
1-3
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
Note: For a global view of the customer documentation, see the Roadmap chapter in
the following documents:
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
1-4
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Introduction to VAM
2
Overview
Purpose
2-2
VAM matrix
2-3
2-6
...................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
2-1
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Introduction to VAM
About VAM
....................................................................................................................................................................................................................................
About VAM
Overview
Activating VAM optimizes power usage where two PAs are shared among multiple
carriers. The power from two PAs in a specific configuration scenario can be reused to
extend support to the DCH and HSDPA user or to manage the DCH and HSDPA user
traffic.
For example, if a BTSEquipment is in a three carrier (STSR2+1) configuration, a pair of
PAs is used for RRHs or TRDUs. In this configuration, two carriers are mapped on one
PA and the third carrier is mapped on the second PA. If activated, VAM enables optimum
utilization of the second PA.
VAM is implemented in the digital domain. Although VAM is a software feature, it may
require hardware addition for the supported BTS configurations. For example, in STSR2
configuration, if the BTS is configured with single PA, an additional PA for VAM
implementation must be added. For more details, see Hardware requirements (p. 3-4).
Activation of the VAM feature offers the following advantages:
If VAM is activated on all the three carriers, STSR3-M offers 33% more power per carrier
in comparison to a typical STSR2+1 scenario. For example, with a pair of 60W PA or a
twin PA, 40W can be made available per carrier with VAM instead of 30W with
non-MIMO power configurations. Because of the power optimization, the HSDPA
support and cell throughput is enhanced by 10%, depending on factors such as cell size
and radio environment.
Note: Activation of the VAM is supported for one, two, and three carrier BTS with up
to three sectors only.
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
2-2
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Introduction to VAM
VAM matrix
....................................................................................................................................................................................................................................
VAM matrix
Overview
VAM is a common pre-coder that balances the power in PAs for non-MIMO users.
VAM maps input signals on to the physical antennas with specific coefficient value for
each path. VAM is as a matrix of four coefficients, w5, w6, w7, w8, and two adders
applied to two input signals from the corresponding virtual antennas.
The four coefficients from the VAM matrix are differentiated only by phases as equal
amplitude is required to balance power usage between the physical antennas. The first PA
and the second PA are configured to amplify the output signals of the VAM function
before being radiated by the antennas. The coefficients of the VAM matrix are fixed. The
coefficients are configured on the BTSCell.
Note: Selection of the coefficients for the VAM matrix is based on the non-MIMO
user performance and the requirement to balance power usage.
Figure 2-1, VAM matrix functions (p. 2-3) illustrates the functions of VAM matrix.
Figure 2-1 VAM matrix functions
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
2-3
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Introduction to VAM
VAM matrix
....................................................................................................................................................................................................................................
Figure 2-2, Virtual matrix form (p. 2-4) illustrates the virtual form of VAM matrix
coefficient.
Figure 2-2 Virtual matrix form
PA defense
If a PA fails, the transmission paths are reconfigured. The VAM coefficients are
reconfigured by the CCM OAM with values. These values do not depend on coefficients
a1 to a4 and 1 to 4 to enable the channels that are fed to the failed virtual antenna to
use the other transmission branch. When PA recovers, the reverse procedure is applied
and the initial VAM matrix configuration is restored.
In case of the first and second transmitter branch failure, VAM coefficients changes.
Figure 2-3, Coefficient values for the first transmitter branch failure (p. 2-4) shows the
coefficient values assigned for the first transmitter branch failure.
Figure 2-3 Coefficient values for the first transmitter branch failure
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
2-4
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Introduction to VAM
VAM matrix
....................................................................................................................................................................................................................................
Figure 2-4, Coefficient values for the second transmitter branch failure (p. 2-5) shows
the coefficient values assigned for the second transmitter branch failure.
Figure 2-4 Coefficient values for the second transmitter branch failure
As VAM coefficients provided by the OAM are in polar format of amplitude and phase,
the PQ3 converts the coefficients from polar to Cartesian format.
Note: The same PA defense procedure is used when both transmitter (Tx) and receiver
(Rx) branches fail.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
2-5
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Introduction to VAM
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
2-6
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Introduction to VAM
....................................................................................................................................................................................................................................
Figure 2-5, VAM architecture (p. 2-7) illustrates the architecture of VAM.
Figure 2-5 VAM architecture
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
2-7
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Introduction to VAM
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
2-8
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Overview
Purpose
3-2
3-3
Hardware requirements
3-4
Required access
3-5
3-6
3-7
3-10
Configuration parameters
3-11
3-12
...................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
3-1
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Overview
....................................................................................................................................................................................................................................
Configuration requirements
Overview
Purpose
3-3
Hardware requirements
3-4
Required access
3-5
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
3-2
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
NodeB
Note: The activation of VAM impacts BTS NodeBs only. The activation procedure is
not applicable to the OneBTS NodeBs.
RNC
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
3-3
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Hardware requirements
....................................................................................................................................................................................................................................
Hardware requirements
Hardware requirements for VAM activation
Table 3-1, Supported hardware for VAM activation (p. 3-4) lists the hardware required
for VAM activation.
Table 3-1
NodeB
baseband
NodeB RF
Transmission/
controller
RNC
eCEM
eCEM-u
Twin RRH2x60W
2100MHz
DCPS or
eDCPS
PSFP
Recommended:
xCCM(-u) (MGA
GE) or eCCM-u
Supported: xCCM
(MDA E1 with
Hybrid Iub)
Macro+xcob+2*TRDU60W
Note: The use of
per sector from the same
cross-polar antenna is
manufacturer or supplier
mandatory.
Note: In d2u or macro
configuration, ensure that two
TRDU60Ws within a sector
have the same PEC CODE.
Configuration restrictions
Macro iBTS: Equipped with xCOB and two GPCS TRDU60W per sector
d2U: Equipped with two GPCS TRDU60W per sector
xCEM(-u)
iCCM
Note: VAM is supported only by the RF modules mentioned in Table 3-1, Supported
hardware for VAM activation (p. 3-4).
Note: Before you proceed with the configuration, ensure that two RRHs or TRDUs of
60W capacity are installed and commissioned.
Engineering recommendation
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
3-4
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Required access
....................................................................................................................................................................................................................................
Required access
Logins
For VAM activation, ensure that you have access to the following systems:
WPS
WMS
Note: Administrator privileges are required to perform activation tasks in WMS.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
3-5
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Overview
....................................................................................................................................................................................................................................
The purpose of this section is to describe the configuration scenarios and sequence of
tasks to be performed for successful activation.
Contents
Configuration scenarios for VAM support
Task sequence and estimated duration
3-7
3-10
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
3-6
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
STSR-1M
STSR-2M
STSR-3M
Note: When VAM is activated for STSRx BTS configuration, it is referred to as
STSR-xM.
For example, STSR-1M is VAM support configured on STSR1.
Figure 3-1, VAM in STSR-1M (p. 3-7) illustrates the STSR-1M configuration scenario
where one carrier is used.
Figure 3-1 VAM in STSR-1M
In this case, VAM allocates additional power to the carriers. So, 2x60W of FR module can
be delivered to a rural cell to improve the DL throughput at cell edge.
STSR-2M use case
In this case, one HSDPA carrier and one Rel99 carrier with two PAs are considered.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
3-7
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
Figure 3-2, VAM in STSR-2M (p. 3-8) illustrates the STSR-2M configuration scenario
where only two carriers are used.
Figure 3-2 VAM in STSR-2M
In this case, VAM can be used for power pooling to reallocate the unused power from F1
(Rel99) to F2 (HSDPA).
STSR-3M use case
In this case, RRH 2x60W with twin PA can be used to transmit three carriers in the same
frequency band, within 20 MHz with 40W per carrier, that is 2x20W.
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
3-8
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
Figure 3-3, VAM in STSR-3M (p. 3-9) illustrates the STSR-3M configuration scenario
where only three carriers are used.
Figure 3-3 VAM in STSR-3M
In this case, VAM can avoid and reduce the limitations linked to the following scenarios:
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
3-9
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
The purpose of this topic is to describe the configuration task sequence and the expected
duration per activity.
VAM activation tasks
Table 3-2, Task sequence (p. 3-10) lists the tasks to be performed in sequential order for
successful activation of VAM.
Table 3-2
Task sequence
Step
Procedure
Exporting workorders
Table 3-3, Activation duration (p. 3-10) specifies the time required to complete each
configuration task.
Table 3-3
Activation duration
Duration
30 minutes
Exporting workorders
< 1 minute
Workorder activation
Procedure
Duration
< 1 hour
15 minutes
< 1 hour
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
3-10
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Overview
....................................................................................................................................................................................................................................
Configuration parameters
Overview
Purpose
The purpose of this section is to list and describe the input parameters required for
configuring VAM support.
Contents
Parameters for BTS configuration
3-12
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
3-11
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
Ensure that the application engineers are provided with the configuration parameters for
VAM configuration.
Table 3-4, List of configuration parameters (p. 3-12) lists and describes the
configuration parameters required for VAM activation.
Table 3-4
Parameter
Object
Description
isVamAllowed
BTSEquipment
transportFiberDelay
BTSCell
dualPaUsage
BTSCell
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
3-12
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
Table 3-4
(continued)
Parameter
Object
Description
vamAmplitudeCoeff
BTSCell
BTSCell
BTSCell
STSR1-M: 100
STSR2-M: 50
STSR3-M: 33
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
3-13
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
Table 3-4
(continued)
Parameter
Object
Description
modemPreference
HsXpaResource
hspaHardwareAllocation
RfCarrier
antennaConnectionId
RemoteRadioHead
rrhMode
RemoteRadioHead
antennaConnection_11,
antennaConnection_21
antennaConnection_31
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
3-14
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
Table 3-4
(continued)
Parameter
Object
Description
rrhNumberFrequency
RemoteRadioHead
frequency
frequencies
radioEquipmentType
RemoteRadioHead
isBtsDualTechnologySecondaryController
RemoteRadioHead
rrhNumberFrequency
RemoteRadioHead
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
3-15
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
Table 3-4
(continued)
Parameter
Object
Description
rxCabling
AntennaAccess
AntennaAccess
candidateForSwitchOff
PaResourceRRH
maxRrhPowerAmplification
PaResourceRRH
frequencyGroupId
LocalCellGroup
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
3-16
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
Note: For more information on the configuration parameters, see Alcatel-Lucent 9353
Wireless Management System - Parameters Reference Guide: Node B Parameters,
NN-20500-027P4.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
3-17
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
3-18
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Overview
Purpose
The purpose of this chapter is to describe the procedures that must be performed before
the VAM configuration.
Note: The procedures mentioned in this chapter are optional and applicable only if the
initial setup is not complete and if the BTS is not created.
Contents
Initial configuration procedures
4-2
4-3
4-4
Creating a BTSEquipment
4-6
Configuring a BTSEquipment
4-7
Configuring BTSCells
4-10
Configuring NodeB
4-15
4-19
4-21
...................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
4-1
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Overview
....................................................................................................................................................................................................................................
The purpose of this section is to describe the initial configuration procedures for the
activation of VAM.
Contents
Configuring WPS network view
4-3
4-4
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
4-2
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
The purpose of this procedure is to describe the steps to synchronize WPS network view
prior to configuration.
Note: This procedure is optional and applicable only if the WPS view is not
synchronized.
Before you begin
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
4-3
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
The purpose of this procedure is to provide step-by-step instructions for setting global
parameters.
Common parameters
Before creating and configuring the BTSEquipment, ensure that the global parameters for
the following objects are set:
Ensure that the operator-specific appropriate values are set for the parameters listed in
the following table:
Parameter
Description
frequencyBandList
mobileCountryCode
mobileNetworkCode
type
userLabel
Ensure that the appropriate values are set for the parameters listed in the following
table:
Parameter
Description
mobileCountryCode
mobileNetworkCode
dlFrequencyList
ulFrequencyList
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
4-4
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
Parameter
Description
testFrequencyList
userSpecificInfo
Ensure that the appropriate values are set for the parameters listed in the following
table:
Parameter
Description
GSMbandIndicator
userSpecificInfo
For more information on the parameters set for this procedure, use the embedded Help
function (F1 key) or see Alcatel-Lucent 9353 Wireless Management System - Parameters
Reference Guide, NN-20500-027.
Before you begin
Before you begin, ensure that an up-to-date network snapshot is imported into WPS.
Steps
For detailed procedural information on setting global parameters, see Setting Global
Parameters in Alcatel-Lucent 9952 Wireless Provisioning System - User Guide,
NN-20500-036.
Note: For information on how the WPS tool sets the attribute modelName during the
Configure BTSEquipment operation, see the document Rules for WPS Access,
UMT/OMC/DD/012026.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
4-5
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Overview
....................................................................................................................................................................................................................................
Creating a BTSEquipment
Overview
Purpose
4-7
Configuring BTSCells
4-10
Configuring NodeB
4-15
4-19
4-21
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
4-6
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Configuring a BTSEquipment
....................................................................................................................................................................................................................................
Configuring a BTSEquipment
Purpose
The purpose of this procedure is to describe the steps to configure BTSEquipment for
VAM activation.
Before you begin
Before you begin, ensure that a workorder is created to record the configuration changes.
For more information on creating a workorder, see Alcatel-Lucent 9952 Wireless
Provisioning System - User Guide, NN-20500-036.
Note: For more information on the parameters set for this procedure, use the
embedded Help function (F1 key) or see Alcatel-Lucent 9353 Wireless Management
System - Parameters Reference Guide, NN-20500-027.
Steps to configure BTSEquipment
From the Object Editor: Overview tab, click the NodeB wizard link.
Result: The NodeB wizard window appears.
...................................................................................................................................................................................................
From the NodeB wizard task tree, select the BTS Equipment Configuration task.
...................................................................................................................................................................................................
Enter appropriate values for the required attributes, and then click OK.
Result: The Configure BtsEquipment operation is available.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
4-7
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Configuring a BTSEquipment
....................................................................................................................................................................................................................................
Figure 4-1, Operation: Configure BTS Equipment (p. 4-8) shows the Operation:
Configure BTS Equipment window.
Figure 4-1 Operation: Configure BTS Equipment
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
4-8
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Configuring a BTSEquipment
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Select an appropriate STSR configuration variant for Local Configuration and RRH
variant for RRH Configuration.
...................................................................................................................................................................................................
10
11
Enter appropriate values for all the required attributes, and then click OK.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
4-9
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Configuring BTSCells
....................................................................................................................................................................................................................................
Configuring BTSCells
Purpose
The purpose of this procedure is to describe the steps to configure BTSCells for VAM
support.
Procedure overview
Steps to configure BTS cells and local cell groups (p. 4-12)
Before you begin, ensure that the following prerequisites are met:
From the Object Editor: Overview tab, click the NodeB wizard link.
Result: The NodeB wizard window appears.
...................................................................................................................................................................................................
From the NodeB wizard task tree, select the BTS Equipment Configuration task.
...................................................................................................................................................................................................
From the Current status panel, click Configure Sectors And Optical Interfaces.
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
4-10
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Configuring BTSCells
....................................................................................................................................................................................................................................
Result: The Operation: Configure Sectors And Optical Interfaces window appears.
Figure 4-2, Operation: Configure Sectors and Optical Interfaces (p. 4-11) shows the
Operation: Configure Sectors And Optical Interfaces window window.
Figure 4-2 Operation: Configure Sectors and Optical Interfaces
...................................................................................................................................................................................................
Click OK.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
4-11
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Configuring BTSCells
....................................................................................................................................................................................................................................
Perform the following steps to configure BTS cells and local cell groups:
...................................................................................................................................................................................................
From the Object Editor: Overview tab, click the NodeB wizard link.
Result: The NodeB wizard window appears.
...................................................................................................................................................................................................
From the NodeB wizard task tree, select the BTS Equipment Configuration task.
...................................................................................................................................................................................................
From the Current status panel, click Configure BtsCells And LocalCellGroups.
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
4-12
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Configuring BTSCells
....................................................................................................................................................................................................................................
Figure 4-3, Operation: Configure BtsCells And LocalCellGroups (p. 4-13) shows
the Operation: Configure BtsCells And LocalCellGroups window.
Figure 4-3 Operation: Configure BtsCells And LocalCellGroups
...................................................................................................................................................................................................
Select appropriate values for Bts Cell Definition, and LocalcellGroup definition.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
4-13
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Configuring BTSCells
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Click OK.
E...................................................................................................................................................................................................
N D O F S T E P S
Next step
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
4-14
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Configuring NodeB
....................................................................................................................................................................................................................................
Configuring NodeB
Purpose
The purpose of this procedure is to provide steps to configure NodeB for VAM support.
Procedure overview
From the WPS network tree, select the NodeB object to update.
...................................................................................................................................................................................................
From the Object Editor: Overview tab, click the NodeB wizard link.
Result: The NodeB wizard window appears.
...................................................................................................................................................................................................
From the NodeB wizard task tree, select the NodeB Configuration task.
...................................................................................................................................................................................................
To configure NodeB, from the Current status panel, click Configure NodeB.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
4-15
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Configuring NodeB
....................................................................................................................................................................................................................................
Ensure that the appropriate values are entered for the required attributes.
Figure 4-4, Operation: Configure NodeB (p. 4-16) shows the Operation: Configure
NodeB window.
Figure 4-4 Operation: Configure NodeB
...................................................................................................................................................................................................
Click OK.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
4-16
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Configuring NodeB
....................................................................................................................................................................................................................................
To configure FDDCells, from the Current status panel, click Define FddCell Radio
Configuration.
Result: The Operation: Define FddCell Radio Configuration window appears.
...................................................................................................................................................................................................
Enter appropriate values for the required attributes, and then click OK.
...................................................................................................................................................................................................
To configure mobility, from the Current status panel, click Configure FDDCells
Mobility.
Result: The Operation: Configure FDDCells Mobility window appears.
Note: Before configuring FDDcells mobility, ensure that NodeB is parented and at
least one GSM Cell is defined under the parent RNC, or the number of
frequencies used in the configuration is greater than one per band.
...................................................................................................................................................................................................
Enter appropriate values for the required attributes, and then click OK.
...................................................................................................................................................................................................
To configure FDDCell localization parameters, from the Current status panel, click
Define FddCell Localization Configuration.
Result: The Operation: Define FddCell Localization Configuration window
appears.
...................................................................................................................................................................................................
Enter appropriate values for the required attributes, and then click OK.
...................................................................................................................................................................................................
To configure the FDDCell coordinate information, from the Current status panel, click
Define FddCell GaiCoord configuration.
Result: The Operation: Define FddCell GaiCoord configuration window appears.
...................................................................................................................................................................................................
Enter an appropriate value for the Number of geographical points parameter and click
the Number of geographical points field to display the List of GaiCoord.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
4-17
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Configuring NodeB
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Enter appropriate values for the required attributes, and then click OK.
E...................................................................................................................................................................................................
N D O F S T E P S
From the NodeB wizard task tree, select the Channels Configuration sub-task.
...................................................................................................................................................................................................
From the Current status panel, click Propagate Channels Model To FddCells.
Result: The Operation: Propagate Channels Model To FddCells window appears.
...................................................................................................................................................................................................
Enter appropriate values for the required attributes, and then click OK.
Result: The NodeB Configuration task turns green.
...................................................................................................................................................................................................
Click Close.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
4-18
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
The purpose of this procedure is to provide steps to configure the RRH site for VAM
activation.
Before you begin
From the Object Editor: Overview tab, click the NodeB wizard link.
Result: The NodeB wizard window appears.
...................................................................................................................................................................................................
From the NodeB wizard task tree, select the Site Configuration task.
...................................................................................................................................................................................................
Ensure that appropriate values are entered for all the required attributes as shown in
Figure 4-5, Operation: Configure a site (p. 4-20).
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
4-19
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
Figure 4-5, Operation: Configure a site (p. 4-20) illustrates the Operation: Configure a
site window.
Figure 4-5 Operation: Configure a site
...................................................................................................................................................................................................
Click OK.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
4-20
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
The purpose of this procedure is to provide steps to configure antenna system for the
RRH site and VAM activation.
Before you begin
Perform the following steps to configure antenna system for the RRH site:
...................................................................................................................................................................................................
From the Object Editor: Overview tab, click the NodeB wizard link.
Result: The NodeB wizard window appears.
...................................................................................................................................................................................................
From the NodeB wizard task tree, select the Site Configuration task.
...................................................................................................................................................................................................
Ensure that appropriate values are entered for all the required attributes.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
4-21
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
Figure 4-6, Operation: Antenna System Definition (p. 4-22) shows the Operation:
Antenna System Definition window.
Figure 4-6 Operation: Antenna System Definition
...................................................................................................................................................................................................
Click OK.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
4-22
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
4-23
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
4-24
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Configuring VAM
5
Overview
Purpose
The purpose of this chapter is to provide procedural information to configure and activate
VAM support on BTS.
Contents
Setting activation flags and VAM parameters
5-2
Activating flags
5-3
5-6
5-16
5-17
5-21
5-25
5-26
5-28
5-29
...................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
5-1
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Configuring VAM
Setting activation flags and VAM parameters
Overview
....................................................................................................................................................................................................................................
The purpose of this section is to provide procedural information to set activation flags and
configure parameters for VAM support.
Contents
Activating flags
5-3
5-6
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
5-2
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Configuring VAM
Setting activation flags and VAM parameters
Activating flags
....................................................................................................................................................................................................................................
Activating flags
Purpose
The purpose of this procedure is to provide steps to set the flags for activating VAM on
the BTSEquipment and the associated BTSCells.
Before you begin
BTSEquipment is created.
A workorder is created to record the configuration changes.
Note: For more information on creating a workorder, see Alcatel-Lucent 9952
Wireless Provisioning System - User Guide, NN-20500-036.
For more information about the parameters set for this procedure, use the embedded
Help function (F1 key) or see Alcatel-Lucent 9353 Wireless Management System Parameters Reference Guide, NN-20500-027.
Perform the following steps to set the flags for activating VAM:
...................................................................................................................................................................................................
From the Object Editor: Overview tab, click the Flags Setting link.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
5-3
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Configuring VAM
Setting activation flags and VAM parameters
Activating flags
....................................................................................................................................................................................................................................
Figure 5-1, Operation: Flags Setting (p. 5-4) shows the Operation: Flags Setting
window.
Figure 5-1 Operation: Flags Setting
...................................................................................................................................................................................................
Repeat Step 5 for all the BTSCells under the BTSEquipment to activate VAM.
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
5-4
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Configuring VAM
Setting activation flags and VAM parameters
Activating flags
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Click OK.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
5-5
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Configuring VAM
Setting activation flags and VAM parameters
....................................................................................................................................................................................................................................
The flags setting operation is complete. For detailed information on how to set
activation flags, see Activating flags (p. 5-3).
Perform the following steps to set parameters at the BTSEquipment level for VAM
support:
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
5-6
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Configuring VAM
Setting activation flags and VAM parameters
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
5-7
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Configuring VAM
Setting activation flags and VAM parameters
....................................................................................................................................................................................................................................
Reference: For more information on setting flags, see Activating flags (p. 5-3).
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
5-8
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Configuring VAM
Setting activation flags and VAM parameters
....................................................................................................................................................................................................................................
Figure 5-3, Configuring antenna connection (p. 5-9) illustrates the configuration of the
antenna connection.
Figure 5-3 Configuring antenna connection
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
5-9
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Configuring VAM
Setting activation flags and VAM parameters
....................................................................................................................................................................................................................................
When VAM is activated, only the main RF port (Rx/Tx) of each TRDU is configured.
The diversity RF port (Rx) of each TRDU is not configured. Main RF port (Rx/Tx) of
the first TRDU is connected to the BTS Main antenna port. Main RF port (Rx/Tx) of
the second TRDU is connected to the BTS Div antenna port. Diversity RF port (Rx)
of each TRDU is not connected.
E...................................................................................................................................................................................................
N D O F S T E P S
Perform the following steps to set parameters at the BTSCell level for VAM support:
...................................................................................................................................................................................................
From the WPS network tree, select the BTSEquipment > BTSCell.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
5-10
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Configuring VAM
Setting activation flags and VAM parameters
....................................................................................................................................................................................................................................
Figure 5-4, Configuring BTSCell (p. 5-11) illustrates the configuration of the BTSCell.
Figure 5-4 Configuring BTSCell
...................................................................................................................................................................................................
On the Edition panel, select VamParameters as the child object type and click Create.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
5-11
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Configuring VAM
Setting activation flags and VAM parameters
....................................................................................................................................................................................................................................
Result: The VamParameters object is created under the BTSCell and is available in
...................................................................................................................................................................................................
vamAmplitudeCoeff
vamPhaseCoeff
...................................................................................................................................................................................................
To set the parameter value and to define VAM matrix coefficient, click Set.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
5-12
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Configuring VAM
Setting activation flags and VAM parameters
....................................................................................................................................................................................................................................
Perform the following steps to set parameters at the HsxPaResource level for VAM
support:
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
5-13
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Configuring VAM
Setting activation flags and VAM parameters
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Perform the following steps to set parameters at the RFCarrier level for VAM support:
...................................................................................................................................................................................................
From the network tree, select the RFCarrier to configure under BTSEquipment.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
5-14
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Configuring VAM
Setting activation flags and VAM parameters
....................................................................................................................................................................................................................................
Figure 5-7, Configuring RFCarrier (p. 5-15) illustrates the configuration of the
RFCarrier.
Figure 5-7 Configuring RFCarrier
...................................................................................................................................................................................................
To set the parameter value and adjust the CEM allocation, click Set.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
5-15
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Configuring VAM
Setting RRH instances
Overview
....................................................................................................................................................................................................................................
The purpose of this section is to provide steps to create RRH cells or check the
configuration settings of the existing RRH cells for activating VAM.
Configuration scenarios
Select one of the following procedures depending on the initial configuration, before
activating VAM support on the BTS:
STSRx: To create new RRH instances, proceed to Adding RRH instances (p. 5-17).
Contents
Adding RRH instances
5-17
5-21
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
5-16
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Configuring VAM
Setting RRH instances
....................................................................................................................................................................................................................................
The purpose of this topic is to provide steps to add RRH cells for VAM support.
Procedure overview
From the Object creation: create drop-down menu on the Object Editor: Edition tab,
select the RemoteRadioHead object.
...................................................................................................................................................................................................
To select the userLabel, select userLabel from the drop-down menu, and then click
Create.
Result: The RemoteRadioHead object appears under the BTSEquipment in the
network tree.
...................................................................................................................................................................................................
From the network tree, select the RemoteRadioHead/<ID> component for the specific
BTSEquipment to configure VAM support.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
5-17
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Configuring VAM
Setting RRH instances
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
From the Object Editor: Edition tab, set the appropriate values for the following
parameters:
antennaAccessId
...................................................................................................................................................................................................
From the Object Editor: Edition tab, set the value of maxRrhPowerAmplification
parameter to fullMode to indicate that the full power of the hardware resource can be
used.
...................................................................................................................................................................................................
10
Perform the following steps to add RRH instances for twin PA resource:
If you have an RRH instance already added with one PaResourceRRH instance, proceed
with the following steps. To add an RRH with two PaResourceRRH instances, perform
step 1 to 3 from Steps to add RRH instances for TRDU (p. 5-17) before you proceed
with the following steps.
...................................................................................................................................................................................................
From the network tree, select the RemoteRadioHead/<ID> component for the specific
BTSEquipment on which you want to configure VAM support.
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
5-18
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Configuring VAM
Setting RRH instances
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
From the Object Editor: Edition tab, ensure that the appropriate values are set for the
following parameters:
antennaAccessId
radioEquipmentType to RRH
rrhMode to sectorMode
...................................................................................................................................................................................................
Figure 5-8, Key editor for 'PaResourceRRH' (p. 5-19) shows the Key editor for
'PaResourceRRH' window.
Figure 5-8 Key editor for 'PaResourceRRH'
...................................................................................................................................................................................................
Enter the value for the rdnId and then click OK.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
5-19
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Configuring VAM
Setting RRH instances
....................................................................................................................................................................................................................................
From the Object Editor: Edition tab, set the value of maxRrhPowerAmplification
parameter to fullMode to indicate that the full power of the hardware resource can be
used.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
5-20
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Configuring VAM
Setting RRH instances
....................................................................................................................................................................................................................................
The purpose of this topic is to provide steps to check the existing RRH cells for VAM
support.
Procedure overview
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
5-21
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Configuring VAM
Setting RRH instances
....................................................................................................................................................................................................................................
Figure 5-9, RemoteRadioHead instances for TRDU (p. 5-22) illustrates the selection
RemoteRadioHead instance for TRDU.
Figure 5-9 RemoteRadioHead instances for TRDU
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
5-22
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Configuring VAM
Setting RRH instances
....................................................................................................................................................................................................................................
Example: The value of the antennaAccessId for both the RRH instances in the
same sector is set to AntennaAccess/antennaConnection_11.
...................................................................................................................................................................................................
To return to the WPS main window, click Object Editor: Overview tab.
E...................................................................................................................................................................................................
N D O F S T E P S
Perform the following steps to check RRH instances for twin PA resource:
...................................................................................................................................................................................................
Ensure that two PaResourceRRH instances appears in the sub-tree under each
RemoteRadioHead/<ID> component.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
5-23
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Configuring VAM
Setting RRH instances
....................................................................................................................................................................................................................................
Figure 5-10, PaResourceRRH instances for twin RRH (p. 5-24) illustrates the checking
of PaResourceRRH instances.
Figure 5-10 PaResourceRRH instances for twin RRH
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
5-24
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Configuring VAM
Overview
....................................................................................................................................................................................................................................
5-26
5-28
5-29
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
5-25
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Configuring VAM
Exporting and activating the workorder
....................................................................................................................................................................................................................................
The purpose of this procedure is to generate the XML file with configuration settings for
activating VAM.
This procedure facilitates speeding up the whole process, by exporting only the relevant
applicable modifications on the Main Server.
Before you begin
Ensure that the required configuration activities for VAM activation are completed and
defined in a workspace by one or several error-free workorders created for the current
view of the network.
Steps to generate the XML file with configuration settings
Perform the following steps to generate the XML file with configuration settings for
activating VAM:
...................................................................................................................................................................................................
Select an option to save the workspace. If required, enter a new workspace name, and
click Run.
...................................................................................................................................................................................................
Right-click on the selected workorder and select Export workorder from the contextual
menu.
To export the workorder to a local directory, select the on local file system option.
To export the workorder to a live server repository, select on live server repository
option.
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
5-26
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Configuring VAM
Exporting and activating the workorder
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
5-27
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Configuring VAM
Exporting and activating the workorder
....................................................................................................................................................................................................................................
The Network and the OMC are running without any problem.
Calls can be established on the RNC that is going to be changed.
The workorder (CM XML) file is ready to be activated.
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
5-28
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Configuring VAM
Exporting and activating the workorder
....................................................................................................................................................................................................................................
The network and the OMC are operational without any issues.
From the WMS menu bar, select Configuration -> Sessions Manager.
Result: The Sessions Manager window appears.
...................................................................................................................................................................................................
From the Sessions Manager window, select any of the following options:
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
5-29
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Configuring VAM
Exporting and activating the workorder
....................................................................................................................................................................................................................................
Result: The Excluded Nodes panel on the Create Session window displays the
Click Launch.
In the Sessions Manager window, click Summary for <session name>, and check the
status of the following nodes:
I-Nodes must be in Loaded state.
BTS nodes must be in Validated state.
...................................................................................................................................................................................................
If OAM configuration changes are pending in TIL, ensure that the BTSEquipment
changes Activation Type is CRITICAL and will result in BTS reset.
...................................................................................................................................................................................................
10
Click Launch.
...................................................................................................................................................................................................
11
12
13
(Optional) If OAM traffic is on ATM or on IP, select the workorder and all the impacted
I-Nodes and BTS nodes, and click Launch.
Ensure the status is successful and progress is 100%.
Result: The modified configuration is activated on both the RNC and BTSEquipment.
...................................................................................................................................................................................................
14
(Optional) If OAM traffic is moving to IP, select the impacted BTS nodes, and click
Launch.
Ensure that the status is successful and progress is 100%.
Then select all the impacted I-Nodes and click Launch.
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
5-30
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Configuring VAM
Exporting and activating the workorder
....................................................................................................................................................................................................................................
15
To check that all the impacted nodes are in the Activated state, click Summary for
<session name>.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
5-31
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Configuring VAM
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
5-32
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Overview
Purpose
6-2
...................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
6-1
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
The network and the OMC are up and running without any problem.
Calls can be established on the impacted RNC
The VAM configuration settings are activated.
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
6-2
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Overview
Purpose
The purpose of this chapter is to describe the procedure to restore the initial settings.
Contents
Activating reverse workorder
7-2
...................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
7-1
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
The purpose of this procedure is to describe the steps to reverse a workorder activation.
Before you begin
The workorder is activated and the (CM XML) file is available in the appropriate
directory.
The data required for the reverse operation is available in the appropriate directory.
From the WMS menu bar, select Configuration -> Sessions Manager.
Result: The Sessions Manager window appears.
...................................................................................................................................................................................................
From the Sessions Manager window, select any of the following options:
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
7-2
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
Result: The Excluded Nodes panel on the Create Session window appears.
...................................................................................................................................................................................................
After the session is created without any errors, click Validation in the Actions for
<reverse session name> panel.
...................................................................................................................................................................................................
Click Launch.
...................................................................................................................................................................................................
10
11
12
13
Perform the following actions to check the validation report for each node in the summary
section:
...................................................................................................................................................................................................
14
After the validation is completed without any errors, if the I-Nodes are not listed in the
summary, go to Step 15. Otherwise, perform the following actions:
Click Summary for <reverse session name> and ensure that all the impacted nodes
are in the Activated state.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
7-3
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
15
After the changed NEs are validated without errors, click Activation in the Actions for
<reverse session name> panel, and perform the following actions:
When all tasks are completed, click Summary for <reverse session name> to ensure
that the impacted RNCs are in the Activated state.
...................................................................................................................................................................................................
16
From the Sessions Manager window, right-click on the Session List, and select
Terminate.
E...................................................................................................................................................................................................
N D O F S T E P S
Troubleshooting
Table 7-1, Reverse workorder activation (p. 7-4) describes the troubleshooting actions
to perform, in case of failed operations.
Table 7-1
Failed Step
Node Status
Action
Excluded
10
Validation Failed
10
Validation Failed
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
7-4
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
Table 7-1
(continued)
Failed Step
Node Status
Action
11
Activation Partly
realized
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
7-5
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
7-6
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013
Index
activation flag
set, 5-2
................................................................................................
C channel
configure, 4-18
activation post-checks
procedure, 6-2
TRDU, 5-21
TRDU, 5-17
antenna system
define, 4-21
................................................................................................
B BTS site
configure, 4-19
BTSCell
configure, 4-10
set parameter, 5-10
BTSEquipment
configure, 4-7
set parameter, 5-6
creating BTSEquipment
procedure, 4-6
................................................................................................
D document
Index
....................................................................................................................................................................................................................................
................................................................................................
F FddCell attribute
configure, 4-17
feature activation verification, 6-2
flag
activation, 5-3
................................................................................................
G global parameter
set, 4-4
................................................................................................
H hardware requirement, 3-4
how to comment, xv
how to order, xv
HsxParesource
set parameter, 5-13
................................................................................................
troubleshoot, 7-4
RF cabling
set parameter, 5-8
RFCarrier
set parameter, 5-14
roadmap
configuration management, 1-1
RRH
check, 5-21
RRH instance
configure, 5-16
RRH instances
add, 5-17
RRH site
configure, 4-19
initial configuration
................................................................................................
procedure, 4-2
S supported systems, xii
initial setting
................................................................................................
restore, 7-1
intended audience, xii
................................................................................................
N network element
impact, 3-3
new in this release, xi
NodeB
configure, 4-15
................................................................................................
P post-configuration, 6-1
V VAM
configure, 5-1
introduction, 2-1
matrix, 2-3
matrix coefficient, 2-4
power balance, 2-6
VAM activation
preparation, 4-1
Index
....................................................................................................................................................................................................................................
VAM parameter
set, 5-2
verification, 6-1
................................................................................................
W WMS
....................................................................................................................................................................................................................................
Alcatel-Lucent 9353 WMS
Alcatel-Lucent Proprietary
IN-3
NN-20500-311 UA08.1
Use pursuant to applicable agreements
Issue 1.12 January 2013
Index
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent Proprietary
Alcatel-Lucent 9353 WMS
IN-4
Use pursuant to applicable agreements
NN-20500-311 UA08.1
Issue 1.12 January 2013