Beruflich Dokumente
Kultur Dokumente
Test Procedure
LEGAL INFORMATION
By accepting this certain document of ZTE CORPORATION you agree to the following
terms. If you do not agree to the following terms, please notice that you are not allowed
to use this document.
Copyright 2015 ZTE CORPORATION. Any rights not expressly granted herein are
reserved. This document contains proprietary information of ZTE CORPORATION. Any
reproduction, transfer, distribution, use or disclosure of this document or any portion of
this document, in any form by any means, without the prior written consent of ZTE
CORPORATION is prohibited.
and
are registered trademarks of ZTE CORPORATION. ZTEs company
name, logo and product names referenced herein are either trademarks or registered
trademarks of ZTE CORPORATION. Other product and company names mentioned
herein may be trademarks or trade names of their respective owners. Without the prior
written consent of ZTE CORPORATION or the third party owner thereof, anyones access
to this document should not be construed as granting, by implication, estopped or
otherwise, any license or right to use any marks appearing in the document.
The design of this product complies with requirements of environmental protection and
personal security. This product shall be stored, used or discarded in accordance with
product manual, relevant contract or laws and regulations in relevant country
(countries).
This document is provided as is and as available. Information contained in this
document is subject to continuous update without further notice due to improvement
and update of ZTE CORPORATIONs products and technologies.
ZTE CORPORATION
Addres
s:
Websit
e:
Email:
NO. 55
Hi-tech Road South
ShenZhen
P.R.China
518057
http://dms.zte.com.cn
doc@zte.com.cn
TABLE OF CONTENTS
ZTE Confidential Proprietary
Short Description
Prerequisites
Steps
1. Click on Start > All Programs > ZTE LMTTools > LoadTool to open the log-in interface, as shown in fellow
3. Browse the local disk to choose an appropriate software version and click Open.
LoadTool Interface reappears, as shown fellow:
4.Select the added version for Version. Click Run Version to open the interface as
shown in
ZTE Confidential Proprietary
5.Select a template file or a configuration file saved in local hard disk. Click Open.
Result:
Steps
Context
Steps
2. Right-Click the blank space on Topology interface. The shortcut menu appears. Click on Add and Topology Setting interface is shown in fe llo w. Select the proper parameter value
according to networking connection mode and the
board/inter- face where the fiber link interconnecting racks is
located. Click Yes.
Result
10
Steps
Environment monitoring configuration is successful, and the configured item appears on Environment Monitoring interface.
11
Prerequisites
Context
Steps
12
To configure circuit status and the port via which dry contact alarm
signals are inputted
Prerequisites
The board used to input dry contact signals has been configured.
Context
Steps
13
E
Dry contact is successfully configured, and the configured item
appears on Dry contact interface.
The alarm signals of the lightning protection box of external
power supply are inputted into BS R8840 remote rack via dry
contact interface. The interface board is RTR. The dry contact
port No. is 0. The normal circuit status of lightning protection box
is close. Alarm occurs in the case of open circuit. The dry
contact configuration example is shown in Figure 51.
14
Steps
Result
15
Context
Steps
16
17
18
19
20
To configure GSM RU
The Radio Mode in BTS basic attributes is configured as
GSM.
The rack and board of GSM RF unit have been created.
Steps
21
Prerequisites
Context
Steps
2. Right-Click the blank space on RF Group interface. The shortcut menu appears. Click on Add RF Group > Rack n, and the
interface that appears is shown in fellow
22
2. Right-Click the blank space on baseband resource pool interface. The shortcut menu appears. Click on Add, and the
interface that appears is shown in fellow
23
Steps
24
Context
Local cell is the available cell resource in the BS. Creation of RNC
radio cell is based on that of local cell.
Steps
2. Right-Click the blank space on Local Cell interface. The shortcut menu appears. Click on Add, and the interface that appears is shown in fellow
25