Beruflich Dokumente
Kultur Dokumente
QUIZ- II
DEPARTMENT OF ECE/ EEE
Year / semester: 3/5
EC2311- COMMUNICATION ENGINEERING
CONTENTS:
MULTIPLE ACCESS TECHNIQUES
FREQUENCY DIVISION MULTIPLE ACCESS
TIME DIVISION MULTIPLE ACCESS
CODE DIVISION MULTIPLE ACCESS
SPACE DIVISION MULTIPLE ACCESS
DIRECT SEQUENCE SPREAD SPECTRUM
FREQUENCY HOPPING
Prepared by
J. Jayaseelan., M.E
Assistant Professor/ECE
PITS
1.
2.
3.
4.
5.
6.
7.
8.
9.
a) CDMA
b) CSMA/CA
What is distribution system in wireless?
c) ALOHA
d) none of the mentioned
a) Infrastructure mode
b) ad-hoc mode
In wireless network an extended service set is a set of?
C) False, False
D) True, True
26. In which technique Frequency Spectrum is divided into smaller spectra and is allocated to each user?
27. A) TDMA
B) CDMA
C) FDMA
D) FGMA
28. Which multiple accesses is achieved by allocating different time slots for the different users?
29. A) TDMA
B) CDMA
30. State whether True of False.
i) In GSM only TDMA is used.
ii) There is zero inter-channel interference in CDMA.
31. A) True, False
B) False, True
C) FDMA
D) FGMA
C) False, False
D) True, True
C) packet switching.
D) circuit switching.
34. Which system has typically characterized by very small cells, especially in densely populated areas?
A) 2G system.
B) B) 3G system.
C) 2.5G system.
D) 3.5G system.
35. Which antenna attempts to direct all its energy in a particular direction?
36. A) Directional Antenna
B) One to One Antenna
C) Propagation Antenna
D) Single Direction Antenna
37. Which mode is used for installing networks in wireless communication device characteristics?
38. A) Fixed and wired.
B) Mobile and wired.
40.
45.
55.
60.
65.
70.
75. Which technique can be applied when the bandwidth of a link (in hertz) is greater than the combined bandwidths of the
signals to be transmitted?
76. A) TDM
78.
C) Both (a) or (b)
77. B) FDM
79.
D) Neither (a) or (b)
80. In TDM, the transmission rate of the multiplexed path is usually _______ the sum of the transmission rates of the signal
sources.
81. A) equal to
83.
C) greater than
82. B) less than
84.
D) not related to
85. In a multiplexed system, how many lines share the bandwidth of ____ link?
86. A) 1; n
88.
C) 1; 1
87. B) n; 1
89.
D) n; n
90. What utilization is the use of available bandwidth to achieve specific goals?
91. A) Amplitude
93.
C) Bandwidth
92. B) Frequency
94.
D) None of the above
95. ____ is designed to use the high bandwidth capability of fiber-optic cable.
96. A) WDM
98.
C) TDM
97. B) FDM
99.
D) None of the above
100.We can divide ____ into two different schemes: synchronous or statistical.
101.A) WDM
103.
C) FDM
102.B) TDM
104.
D) none of the above
105.
106.
107.In ________ TDM, each input connection has an allotment in the output even if it is not sending data.
108.A) isochronous
110.
C) synchronous
109.B) statistical
111.
D) none of the above
112.In ________ TDM, slots are dynamically allocated to improve bandwidth efficiency.
113.A) isochronous
115.
C) statistical
114.B) synchronous
116.
D) none of the above
117.The word ______ refers to the portion of a _______ that carries a transmission.
118.A) line; channel
120.
C) link; channel
119. B) channel; link
121.
D) line; link
122.Which multiplexing technique shifts each signal to a different carrier frequency?
123.A) FDM
125.
C) Both (a) and (b)
124.B) TDM
126.
D) None of the above
127.Which multiplexing technique transmits analog signals?
128.A) WDM
130.
C) FDM
129.B) TDM
131.
D) (a) and (c)
132.________ is the set of techniques that allows the simultaneous transmission of multiple signals across a single data link.
133.A) Demodulating
135.
C) Compressing
134.B) Multiplexing
136.
D) None of the above
137.________ can be achieved by using multiplexing; ______ can be achieved by using spreading.
138.A) Privacy and anti jamming; efficiency
140.
C) Efficiency; privacy and anti jamming
139.B) Privacy and efficiency; anti jamming
141.
D) Efficiency and anti jamming; privacy
142.Which technique expands the bandwidth of a signal by replacing each data bit with n bits?
143.A) DSSS
145.
C) FDM
144.B) FHSS
146.
D) TDM
147.Which digital process allows several connections to share the high bandwidth of a link?
148.A) WDM
150.
C) FDM
149.B) TDM
151.
D) None of the above
152.Which digital multiplexing technique combining several low-rate channels into one high-rate one?
153.A) WDM
155.
C) FDM
154.B) TDM
156.
D) None of the above
157.Which technique combines signals from different sources to fit into a larger bandwidth?
158.A) line coding
160.
C) spread spectrum
159.B) block coding
161.
D) none of the above
162.Which multiplexing technique involves signals composed of light beams?
163.A) WDM
165.
C) TDM
164.B) FDM
166.
D) none of the above
167.
Faculty Sign:
168.
Sign:
HOD