Sie sind auf Seite 1von 99

EGANT

CELLULAR COMPONENTS

Multi Operator Combiner


2 xCDMA800/GSM900, 4 x GSM1800,
4 x UMTS
4 Antenna Ports

Combines up to 10 RBSs into 4 antenna


ports
This Multi Operator Combiner enables up to 10
Radio Base Stations to connect to the combiner:
2 CDMA800/GSM900 Radio Base Stations
4 GSM1800 Radio Base Stations
4 UMTS Radio Base Stations
The combiner combines the signals to the
4 antenna ports, or splits the signal to the 10
RBSs in the receiving direction. This is a highly
important function when designing shared
antenna systems wishing to connect multiple
RBSs to the shared antennas.

Save money by installing our Multi


Operator Combiner
By utilizing the Egant Multi Operator Combiner you will reduce the cost of antennas,
feeders and installation. It eliminates the cost
inefficient need to make one antenna installation for each system. By simply connecting
the RBSs into the combiner it will immediately render you all the benefits of antenna
sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1: CDMA800/GSM900
Port 2: CDMA800/GSM900

EG 601 0074

EG 601 0075

806 - 960 MHz


806 - 960 MHz

806 - 960 MHz


806 - 960 MHz

Port 3: GSM1800
Port 4: GSM1800
Port 5: GSM1800
Port 6: GSM1800
Port 7: UMTS
Port 8: UMTS
Port 9: UMTS
Port 10: UMTS

1710 - 1880 MHz


1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

1710 - 1880 MHz


1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

Insertion loss:
Port 1 - 2: CDMA800 - ANT 1 - 4
Port 3 - 6: GSM1800 - ANT 1 - 4
Port 7 - 10: UMTS - ANT 1 - 4

< 1.2 dB
< 1.2 dB
< 1.2 dB

< 1.2 dB
< 1.2 dB
< 1.2 dB

Coupling:
Port 1 - 2: CDMA800 - ANT 1 - 4
Port 3 - 6: GSM1800 - ANT 1 - 4
Port 7 - 10: UMTS - ANT 1 - 4

6.0 dB +/- 0.6 dB


6.0 dB +/- 0.6 dB
6.0 dB +/- 0.6 dB

6.0 dB +/- 0.6 dB


6.0 dB +/- 0.6 dB
6.0 dB +/- 0.6 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

60 W
50 Ohm

450 x 250 x 500 mm


7/16 (f)
N(f)
19 kg

450 x 250 x 500 mm


N (f)
N(f)
19 kg

-30 to +70 C
Relative 5 - 100%

-30 to +70 C
Relative 5 - 100%

Mechanical Specifications
Dimensions (W x H x D):
Input connectors:
Output connectors:
Weight:

Environmental Specifications
Temp. range (normal operation):
Humidity:
Egant reserves the right to change this product specification
at any time without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevA

ANT2

ANT1

EGANT

CELLULAR COMPONENTS

Multi Operator Combiner

UMTS

UMTS

GSM 1800

GSM 1800

GSM 900

GSM 900

2 x GSM900, GSM1800, UMTS


6 Inputs to 2 Antenna Ports

Save money by installing our Multi


Operator Combiner
Combines 6 RBSs into 2 antenna ports
This Multi Operator Combiner enables 6 Radio Base Stations to connect to the combiner:
2 GSM900 Radio Base Stations
2 GSM1800 Radio Base Stations
2 UMTS Radio Base Stations
The combiner combines the 6 signals to the
2 antenna ports, or splits the signal to the 6
RBSs in the receiving direction. This is a
highly desirable function when designing
shared antenna systems wishing to connect
multiple RBSs to the shared antennas.

By utilizing our Multi Operator Combiner


you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation
for each system. By simply connecting the
RBSs into the combiner it will immediately
render you all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port1 GSM900:
Port2 GSM900:
Port3 GSM1800:
Port4 GSM1800:
Port5 UMTS:
Port6 UMTS:

EG 100 4201
806 - 960 MHz
806 - 960 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1920 - 2170 MHz
1920 - 2170 MHz

Insertion loss:
Port 1 + 2 GSM900 - ANT 1 + 2:
Port 3 + 4 GSM1800 - ANT 1 + 2:
Port 5 + 6 UMTS - ANT 1 + 2:

< 4.0 dB (3.3 dB typ)


< 4.0 dB (3.4 dB typ)
< 4.0 dB (3.5 dB typ)

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 20.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

350 x 400 x 220 mm


7/16 (f)
12 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevB

EGANT CELLULAR COMPONENTS

Multi Operator Combiner

Preliminary

3xUMTS, 2xGSM1800, 2xGSM900


7 Inputs to 4 Antenna Port

Combines 7 RBSs into 4 Antenna-port.


The Multi Operator Combiner allows you to
connect up to 8 Radio Base Stations to the Combiner.
3 UMTS Radio Base Stations
2 GSM1800 Radio Base Stations
2 GSM900 Radio Base Stations
The Combiner combines the 7 signals to the
4-Antenna ports or in the receiving way
splits the signal to the 7 RBSs.
This is a extremely important function when
you are designing shared antenna systems
and like to connect multiple RBSs to the
same antennas.

EGANT

CELLULAR COMPONENTS

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband
Port 1 GSM900:
Port 2 GSM900:
Port 3 UMTS:
Port 4 UMTS:
Port 5 UMTS:
Port 6 GSM1800:
Port 7 GSM1800:

EG 601 0055
806 - 960MHz
806 - 960MHz
1920 - 2170MHz
1920 - 2170MHz
1920 - 2170MHz
1710 - 1880MHz
1710 - 1880MHz

Insertion loss:
Port 1 - 7 to ANT:

< 7,5 dB (6,5 typ.)

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43dBm:

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

300 x 400 x 180 mm


7/16 (f)
16 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone:+46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
Preliminary RevB

EGANT CELLULAR COMPONENTS


ANT

Multi Operator Combiner

UMTS
UMTS
UMTS

GSM 1800

GSM 1800

GSM 1800

GSM 900

GSM 900

3xUMTS, 3xGSM1800, 2xGSM900


8 Inputs to 1 Antenna Port

Combines 8 RBSs into 1 Antenna-port.


The Multi Operator Combiner allows you to
connect up to 8 Radio Base Stations to the Combiner.
4 UMTS Radio Base Stations
4 GSM1800 Radio Base Stations
2 GSM900 Radio Base Stations
The Combiner combines the 8 signals to the
1-Antenna port or in the receiving way
splits the signal to the 8 RBSs.
This is a extremely important function when
you are designing shared antenna systems
and like to connect multiple RBSs to the
same antennas.

EGANT

CELLULAR COMPONENTS

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband
Port1: GSM900
Port2: GSM900
Port3: UMTS
Port4: UMTS
Port5: UMTS
Port6: GSM1800
Port7: GSM1800
Port8: GSM1800

EG 601 0034
806 - 960MHz
806 - 960MHz
1920 2170MHz
1920 2170MHz
1920 2170MHz
1710 1880MHz
1710 1880MHz
1710 1880MHz

Insertionloss
Port1-8 - ANT

< 5.5 dB

Input return loss:


Isolation between Systems:
Isolation between same Systems:
Intermodulation 2x43dBm

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications

300 x 400 x 180 mm


7/16 (f)
16 kg

Dimensions (WxHxD):
Connectors:
Weight:

Environmental Specifications
Temp. range (normal operation):
Humidity:

- 30 to + 70 C
Relative 5 - 100%

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone:+46 (0)8 62 00 650
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
Preliminary

EGANT

CELLULAR COMPONENTS

Multi Operator Combiner


2x TETRA/CDMA, 1x GSM900,
3xGSM1800, 2xUMTS
8 Ports In - 4 Ports Out

Save money by installing our Multi


Operator Combiner
Combines 12 RBSs into 4 antenna ports
This Multi Operator Combiner enables 12 Radio Base Stations to connect to the combiner:
2 TETRA/CDMA
1 GSM900 / CDMA Radio Base Stations
3 GSM1800 Radio Base Stations
2 UMTS Radio Base Stations
The combiner combines the 8 signals to the
4 antenna ports, or splits the signal to the 8
RBSs in the receiving direction. This is a highly
important function when designing shared
antenna systems wishing to connect multiple
RBSs to the shared antennas.

By utilizing our Multi Operator Combiner


you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation
for each system. By simply connecting the
RBSs into the combiner it will immediately
render you all the benefits of antenna sharing.

EGANT CELLULAR COMPONENTS

EGANT

CELLULAR COMPONENTS

Multi Operator Combiner


1 x 380 - 520MHz
4 x 800 - 2200 MHz
4 x Antenna Ports
5 Inputs to 4 Antenna Ports

Combines up to 5 RBSs into 4 antenna ports


The Multi Operator Combiner enables a maximum
of Radio Base Stations to connect to the combiner:
1 TETRA Radio Base Station
4 Cellular Radio Base Station
The combiner combines the TETRA and 800 2200MHz signals to the 4 antenna ports or splits
the signal in the receiving direction. This is a very
important function when designing shared antenna
systems wishing to connect multiple RBSs to the
shared antennas.

Save money by installing our Multi


Operator Combiner
By utilizing our Multi Operator Combiner
you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation
for each system. By simply connecting the
RBSs into the combiner it will render you all
the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 :
Port 2:
Port 3:
Port 4:
Port 5:

EG 601 0095
380 - 520 MHz
800 - 2200 MHz
800 - 2200 MHz
800 - 2200 MHz
800 - 2200 MHz

Insertion loss:
Port 1 - 5: ANT 1 - ANT 4:

< 1.2 dB

Coupling:
Port 1 - 5: ANT 1 - ANT 4:

6.0 dB +/- 0.6dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 50 dB
> 30 dB
< 117 dBm (160 dBc)

Max input power/port:

60 W

Impedance in/out:

50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Input connectors:
Antenna connectors:
Weight:

450 x 250 x 500 mm


N (f)
N(f)
18 Kg

Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:

0 to +55 C
Relative 5 - 95%
Indoor use

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
Rev A

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 TETRA / CDMA:
Port 2 TETRA / CDMA:
Port 3 GSM900:
Port 4 GSM1800:
Port 5 GSM1800:
Port 6 GSM1800:
Port 7 UMTS:
Port 8 UMTS:

EG 601 0079
376 - 500 MHz
376 - 500 MHz
824 - 960 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1920 - 2170 MHz
1920 - 2170 MHz

Insertion loss:
Port 1 - 2 TETRA / CDMA:
Port 3 GSM900 - ANT 1 - 4:
Port 4 - 6 GSM1800 - ANT 1 - 4:
Port 7 - 8 UMTS - ANT 1 - 4:

< 7.9 dB (7 dB typ)


< 7.9 dB (7 dB typ)
< 7.9 dB (7 dB typ)
< 7.9 dB (7 dB typ)

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 16.0 dB
> 35 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

20 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

494 x 214 x 500 mm


7/16 (f)
24 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevA

EGANT

CELLULAR COMPONENTS

Multi Operator Combiner


3 x 376 - 470MHz systems to
1 Antenna port

Combine 3 RBSs into 1 Antenna.


Do you have Radio Base Stations or
Repeaters that you like to combine to the
same antenna.
Connect your RBSs to the 3-Way
Combiner and it will give you an optimum
combination with as less loss as possible.
The combiner gives you an easy solution
so you dont need to worry about isolation
or intermodulation in your system.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 :
Port 2:
Port 3:

EG 601 0059
376 - 470 MHz
376 - 470 MHz
376 - 470 MHz

Insertion loss:
Port 1 - 3 to ANT 1

< 6.2 dB + 0,4 dB

Input return loss:


Isolation between same systems:

> 18.0 dB
> 25 dB (35dB typ)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications
Dimensions 19 rack:
Connectors:
Weight:

3HE
7/16 (f)
5 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification


at any time without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevA

EGANT
ANT 2

Multi Operator Combiner

TETRA

DVB-H, TETRA, GSM-R, GSM900


GSM1800, UMTS
6 Inputs to 2 Antenna Ports

DVB-H

GSM-R

GSM900

GSM1800

UMTS

ANT 1

Pr

el

im

in

ar

CELLULAR COMPONENTS

Combines 6 RBSs into 2 antenna ports


This Multi Operator Combiner enables 3 Radio
Base Stations to connect to the combiner:
1 DVB-H Radio Base Stations
1 TETRA Radio Base Station
1 GSM-R Radio Base Station
1 GSM900 Radio Base Station
1 GSM1800 Radio Base Station
1 UMTS Radio Base Station
The combiner combines the 6 signals to the
2 antenna ports, or splits the signal to the 6
RBSs in the receiving direction. This is a highly
important function when designing shared antenna systems wishing to connect multiple RBSs
to the shared antennas.

Save money by installing our Multi


Operator Combiner
By utilizing our Multi Operator Combiner
you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation for
each system. By simply connecting the RBSs
into the combiner it will immediately render
you all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 DVB-H:
Port 2 GSM-R:
Port 3 GSM900:
Port 4 GSM1800:
Port 5 UMTS:
Port 6 TETRA:

EG 601 0057
380 - 710 MHz
876 - 925 MHz
880 - 960 MHz
1710 - 1880 MHz
1920 - 2170 MHz
370 - 400 MHz

Insertion loss:
Port 1 to ANT 1 - 2:
Port 2 to ANT 1 - 2:
Port 3 to ANT 1 - 2:
Port 4 to ANT 1 - 2:
Port 5 to ANT 1 - 2:
Port 6 to ANT 1 - 2:

< 5.0 dB (typ 4.0 dB)


< 4.0 dB (typ 3.5 dB)
< 4.5 dB (typ 4.0 dB)
< 4.5 dB (typ 4.0 dB)
< 4.5 dB (typ 4.0 dB)
< 4.0 dB (typ 3.5 dB)

Input return loss:

> 16.0 dB

Isolation
GSM900 <> GSM1800 <> UMTS
GSM-R <> GSM1800 / UMTS
GSM-R <> GSM900
DVB-H <> GSM-R /GSM900 / GSM1800 / UMTS
DVB-H <> TETRA

> 50 dB
> 70 dB
> 25 dB
> 40 dB
> 22 dB

Max input power/port:


Impedance in/out:

50 W
50 Ohm

Antenna test ports


Port 4, Ant 1 370 - 2170 MHz
Port 5, Ant 2 370 - 2170 MHz

-30.0 dB + 1dB
-30.0 dB + 1dB

Mechanical Specifications
Dimensions (WxHxD):
Connectors:
Weight:

400 x 300 x 120 mm


7/16 (f)
11 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone:+46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevA

EGANT CELLULAR COMPONENTS


ANT1

EGANT

ANT3

ANT2

CELLULAR COMPONENTS

ANT4

Multi Operator Combiner


4 x GSM900, GSM1800, UMTS
1 x TETRA / PMR, FM
14 Inputs to 4 Antenna Ports

TETRA / PMR

UMTS
UMTS
UMTS
UMTS

GSM 1800

GSM 1800

GSM 1800
GSM 1800

GSM 900

GSM 900
GSM 900
GSM 900

FM

Save money by installing our Multi


Operator Combiner

Combines GSM900 / GSM1800 / UMTS /


TETRA / FM into 4 antenna ports
The Multi Operator Combiner enables a maximum of 14 Radio Base Stations to connect to
the combiner:
4 GSM900 Radio Base Stations
4 GSM1800 Radio Base Stations
4 UMTS Radio Base Stations
1 TETRA / PMR Radio Base Station
1 FM Radio Base Station
The combiner combines the 14 signals to the
4 antenna ports, or splits the signal to the 14
RBSs in the receiving direction. This is a very
important function when designing shared
antenna systems wishing to connect multiple
RBSs to the shared antennas.

By utilizing our Multi Operator Combiner


you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation
for each system. By simply connecting the
RBSs into the combiner it will render you all
the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 GSM900 - 1:
Port 2 GSM900 - 2:
Port 3 GSM900 - 3:
Port 4 GSM900 - 4:
Port 5 GSM1800 - 1:
Port 6 GSM1800 - 2:
Port 7 GSM1800 - 3:
Port 8 GSM1800 - 4:
Port 9 UMTS - 1:
Port 10 UMTS - 2:
Port 11 UMTS - 3:
Port 12 UMTS - 4:
Port 13 TETRA (option EG 601 0018):
Port 14 FM (option EG 601 0018):

EG 601 0017
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
1710 -1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
376 - 500 MHz
88 - 108 MHz

Insertion loss:
Port 1 - 4 GSM900 - ANT 1 - 4:
Port 5 - 8 GSM1800 - ANT 1 - 4:
Port 9 - 12 UMTS - ANT 1 - 4:
Port 13 TETRA - ANT 1 - 4:
Port 14 FM - ANT 1 - 4:

< 1.0 dB
< 1.0 dB
< 1.0 dB
< 1.0 dB
< 1.0 dB

Coupling (1 INPUT 4 - OUT):


Port 1, 2, 5, 6, 11, 12 to ANT 1 - 4:
Port 3, 7 to - ANT 3, 4:
Port 3, 7 to - ANT 2 (option EG 601 0019):
Port 4, 8 to - ANT 1, 2:
Port 4, 8 to - ANT 3 (option EG 601 0019):
Port 13 to ANT 1 - 4:
Port 14 to ANT 1 - 4:

6.0 dB +/- 0.5 dB


6.0 dB +/- 0.5 dB
30.0 dB +/- 0.5 dB
6.0 dB +/- 0.5 dB
30.0 dB +/- 0.5 dB
6.0 dB +/- 0.5 dB
6.0 dB +/- 0.5 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors port 1 - 12:
Connectors port 13, 14:
Weight:

300 x 800 x 180 mm


7/16 (f)
N (f)
28 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevB

EGANT

CELLULAR COMPONENTS

Multi Operator Combiner


88 - 500MHz, GSM900
5 Inputs - 4 Output

890-960

Port 1 88 - 500MHz

88 - 500
890-960

Port 2 88 - 500MHz

88 - 500
890-960

Port 3 88 - 500MHz

88 - 500
890-960

Port 4 88 - 500MHz

88 - 500

Feeder1
Feeder2
Feeder3
Feeder4

Port 5 GSM900

Save money by installing our Multi


Operator Combiner
By utilizing our Multi Operator Combiner
you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation
for each system. By simply connecting the
RBSs into the combiner it will immediately
render you all the benefits of antenna sharing.
Connects GSM900 and 88-500MHz systems
to 4 antenna ports
This Multi Operator Combiner enables the connection of 5 RBSs/repeaters to the combiner.
The combiner combines the 5 signals to the 4
antenna ports, or splits the signal to the 5 RBSs in
the receiving way. This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 - 4:
Port 5, GSM900:

EG 601 0061
88 - 500 MHz
890 - 960 MHz

Insertion loss:
Port 1 to ANT 1:
Port 2 to ANT 2:
Port 3 to ANT 3:
Port 4 to ANT 4:
Port 5 to ANT 1-4:

< 0.5 dB (0.25dB typ.)


< 0.5 dB (0.25dB typ.)
< 0.5 dB (0.25dB typ.)
< 0.5 dB (0.25dB typ.)
< 7.0 dB (6.4dB typ.)

Input return loss:


Isolation between systems:

> 16.0 dB
> 50 dB

Max input power/port:


Port 1-4:
Port 5:

300W
150W

Impedance in/out:

50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

250 x 150 x 250 mm


7/16 (f)
15 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevA

EGANT
ANT 2

Multi Operator Combiner


PMR, TETRA, GSM-R
3 Inputs to 2 Antenna Ports

GSM-R

TETRA

PMR

ANT 1

Pr

el

im

in

ar

CELLULAR COMPONENTS

Combines 3 RBSs into 2 antenna ports


This Multi Operator Combiner enables 3 Radio
Base Stations to connect to the combiner:
1 PMR Radio Base Stations
1 TETRA Radio Base Station
1 GSM-R Radio Base Station
The combiner combines the 3 signals to the
2 antenna ports, or splits the signal to the 3
RBSs in the receiving direction. This is a highly
important function when designing shared antenna systems wishing to connect multiple RBSs
to the shared antennas.

Save money by installing our Multi


Operator Combiner
By utilizing our Multi Operator Combiner
you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation for
each system. By simply connecting the RBSs
into the combiner it will immediately render
you all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 PMR:
Port 2 TETRA:
Port 3 GSM-R / GSM900:

EG 601 0056
50 - 470 MHz
370 - 480 MHz
870 - 960 MHz

Insertion loss:
Port 1 - 2 to ANT 1 - 2:
Port 3 to ANT 1 - 2:

< 4.0 dB (typ 3.3 dB)


< 3.5 dB (typ 3.2 dB)

Input return loss:

> 16.0 dB

Isolation
Port 1 to Port 2:
Port 1+2 to Port 3:

> 25 dB
> 50 dB

Max input power/port:


Impedance in/out:

50 W
50 Ohm

Antenna test ports


Port 4, Ant 1 370 - 960 MHz
Port 5, Ant 2 370 - 960 MHz

-30.0 dB + 1dB
-30.0 dB + 1dB

Mechanical Specifications
Dimensions (WxHxD):
Connectors:
Weight:

200 x 300 x 120 mm


7/16 (f)
6 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone:+46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevA

EGANT CELLULAR COMPONENTS


ANT1

ANT3

ANT2

ANT4

EGANT

CELLULAR COMPONENTS

Multi Operator Combiner

UMTS
UMTS
UMTS
UMTS

GSM 1800

GSM 1800

GSM 1800
GSM 1800

GSM 900

GSM 900
GSM 900
GSM 900

4 x GSM900, GSM1800, UMTS


12 Inputs to 4 Antenna Ports

Save money by installing our Multi


Operator Combiner
Combines GSM900 / GSM1800 / UMTS
into 4 antenna ports
The Multi Operator Combiner enables a maximum of 12 Radio Base Stations to connect to
the combiner:
4 GSM900 Radio Base Stations
4 GSM1800 Radio Base Stations
4 UMTS Radio Base Stations
The combiner combines the 12 signals to the
4 antenna ports, or splits the signal to the 12
RBSs in the receiving direction. This is a very
important function when designing shared
antenna systems wishing to connect multiple
RBSs to the shared antennas.

By utilizing our Multi Operator Combiner


you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation
for each system. By simply connecting the
RBSs into the combiner it will render you all
the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 GSM900:
Port 2 GSM900:
Port 3 GSM900:
Port 4 GSM900:
Port 5 GSM1800:
Port 6 GSM1800:
Port 7 GSM1800:
Port 8 GSM1800:
Port 9 UMTS:
Port 10 UMTS:
Port 11 UMTS:
Port 12 UMTS:

EG 100 4202
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
1710 -1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

Insertion loss:
Port 1 - 4 GSM900 - ANT 1 - 4:
Port 5 - 8 GSM1800 - ANT 1 - 4:
Port 9 - 12 UMTS - ANT 1 - 4:

< 1.0 dB
< 1.0 dB
< 1.0 dB

Coupling (1 INPUT 4 - OUT):


Port 1 - 4 GSM900 - ANT 1 - 4:
Port 5 - 8 GSM1800 - ANT 1 - 4:
Port 9 - 12 UMTS - ANT 1 - 4:

6.0 dB +/- 0.5 dB


6.0 dB +/- 0.5 dB
6.0 dB +/- 0.5 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

300 x 400 x 180 mm


7/16 (f)
22 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevB

ANT1

EGANT

CELLULAR COMPONENTS

ANT3

ANT2

ANT4

Multi Operator Combiner

UMTS
UMTS
UMTS
UMTS

GSM 900

GSM 900
GSM 900
GSM 900

4 x GSM900, UMTS
8 Inputs to 4 Antenna Ports

Save money by installing our Multi


Operator Combiner
Combines 8 RBSs into 4 antenna ports
This Multi Operator Combiner enables 8 Radio
Base Stations to connect to the combiner:
4 GSM900 Radio Base Stations
4 UMTS Radio Base Stations
The combiner combines the 8 signals to the
4 antenna ports, or splits the signal to the 8 RBSs
in the receiving direction.This is a highly important function when designing shared antenna
systems wishing to connect multiple RBSs to the
shared antennas.

By utilizing our Multi Operator Combiner


you will reduce the cost of antennas, feeders
and installation.It eliminates the cost inefficient need to make one antenna installation
for each system. By simply connecting the
RBSs into the combiner it will immediately
render you all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 GSM900:
Port 2 GSM900:
Port 3 GSM900:
Port 4 GSM900:
Port 5 UMTS:
Port 6 UMTS:
Port 7 UMTS:
Port 8 UMTS:

EG 100 4205
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

Insertion loss:
Port 1 - 4 GSM900 - ANT 1 - 4:
Port 5 - 8 UMTS - ANT 1 - 4:

< 7.0 dB
< 7.0 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

300 x 400 x 120 mm


7/16 (f)
15 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevB

EGANT

CELLULAR COMPONENTS

ANT1 ANT3
ANT4

UMTS
GSM1800
GSM1800
GSM1800

GSM 900
GSM 900
GSM 900
GSM 900

ANT2

Combines 8 RBSs into 4 antenna ports


This Multi Operator Combiner enables 8 Radio
Base Stations to connect to the combiner:
4 GSM900 Radio Base Stations
4 1800 Radio Base Stations
The combiner combines the 8 signals to the
4 antenna ports, or splits the signal to the 8 RBSs
in the receiving direction. This is a highly important function when designing shared antenna
systems wishing to connect multiple RBSs to the
shared antennas.

Multi Operator Combiner


4 x GSM900, GSM1800
8 Inputs to 4 Antenna Ports

Save money by installing our Multi


Operator Combiner
By utilizing our Multi Operator Combiner you
will reduce the cost of antennas, feeders and
installation. It eliminates the cost inefficient
need to make one antenna installation for each
system. By simply connecting the RBSs into
the combiner it will immediately render you
all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 GSM900:
Port 2 GSM900:
Port 3 GSM900:
Port 4 GSM900:
Port 5 GSM1800:
Port 6 GSM1800:
Port 7 GSM1800:
Port 8 GSM1800:

EG 100 4206
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz

Insertion loss:
Port 1 - 4 GSM900 - ANT 1 - 4:
Port 5 - 8 GSM1800 - ANT 1 - 4:

< 7.0 dB
< 7.0 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

300 x 400 x 120 mm


7/16 (f)
15 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevB

EGANT

CELLULAR COMPONENTS

Multi Operator Combiner


4 x GSM900 / CDMA, GSM1800,
UMTS
12 Ports In - 4 Ports Out

Save money by installing our Multi


Operator Combiner
Combines 12 RBSs into 4 antenna ports
This Multi Operator Combiner enables 12 Radio Base Stations to connect to the combiner:
4 GSM900 / CDMA Radio Base Stations
4 GSM1800 Radio Base Stations
4 UMTS Radio Base Stations
The combiner combines the 12 signals to the
4 antenna ports, or splits the signal to the 12
RBSs in the receiving direction. This is a highly
important function when designing shared
antenna systems wishing to connect multiple
RBSs to the shared antennas.

By utilizing our Multi Operator Combiner


you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation
for each system. By simply connecting the
RBSs into the combiner it will immediately
render you all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
EG 100 4209

EG 100 4210

824 - 960 MHz


824 - 960 MHz
824 - 960 MHz
824 - 960 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

824 - 960 MHz


824 - 960 MHz
824 - 960 MHz
824 - 960 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

Insertion loss:
Port 1 - 4 GSM900 - ANT 1 - 4:
Port 5 - 8 GSM1800 - ANT 1 - 4:
Port 9 - 12 UMTS - ANT 1 - 4:

< 7.9 dB (7 dB typ)


< 7.9 dB (7 dB typ)
< 7.9 dB (7 dB typ)

< 7.9 dB (7 dB typ)


< 7.9 dB (7 dB typ)
< 7.9 dB (7 dB typ)

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 17.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

> 17.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

100 W
50 Ohm

100 W
50 Ohm

494 x 214 x 500 mm


N (f)
24 kg

494 x 214 x 500 mm


7/16 (f)
24 kg

-30 to +70 C
Relative 5 - 100%

-30 to +70 C
Relative 5 - 100%

Product number:
Passband:
Port 1 GSM900 / CDMA:
Port 2 GSM900 / CDMA:
Port 3 GSM900 / CDMA:
Port 4 GSM900 / CDMA:
Port 5 GSM1800:
Port 6 GSM1800:
Port 7 GSM1800:
Port 8 GSM1800:
Port 9 UMTS:
Port 10 UMTS:
Port 11 UMTS:
Port 12 UMTS:

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

Environmental Specifications
Temp. range (normal operation):
Humidity:
Egant reserves the right to change this product specification at any time
without notice.

Antenna 4 Ports (all systems)

1920 - 2170 MHz 4 Ports

824 - 960 MHz 4 Ports

Monitor Port -30 dB

1710 - 1880 MHz 4 Ports

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevB

EGANT

CELLULAR COMPONENTS

Multi Operator Combiner


4 xCDMA800/GSM900, 4 x GSM1800,
4 x UMTS
4 Antenna Ports

Combines up to 12 RBSs into 4 antenna


ports
This Multi Operator Combiner enables up to 12
Radio Base Stations to connect to the combiner:
4 CDMA800/GSM900 Radio Base Stations
4 GSM1800 Radio Base Stations
4 UMTS Radio Base Stations
The combiner combines the signals to the
4 antenna ports, or splits the signal to the 12
RBSs in the receiving direction. This is a highly
important function when designing shared
antenna systems wishing to connect multiple
RBSs to the shared antennas.

Save money by installing our Multi


Operator Combiner
By utilizing the Egant Multi Operator Combiner you will reduce the cost of antennas,
feeders and installation. It eliminates the cost
inefficient need to make one antenna installation for each system. By simply connecting
the RBSs into the combiner it will immediately render you all the benefits of antenna
sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1: CDMA800/GSM900
Port 2: CDMA800/GSM900
Port 3: CDMA800/GSM900
Port 4: CDMA800/GSM900
Port 5: GSM1800
Port 6: GSM1800
Port 7: GSM1800
Port 8: GSM1800
Port 9: UMTS
Port 10: UMTS
Port 11: UMTS
Port 12: UMTS

EG 601 0048
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

Insertion loss:
Port 1 - 4: CDMA800 - ANT 1 - 4
Port 5 - 8: GSM1800 - ANT 1 - 4
Port 9 - 12: UMTS - ANT 1 - 4

< 1.2 dB
< 1.2 dB
< 1.2 dB

Coupling:
Port 1 - 4: CDMA800 - ANT 1 - 4
Port 5 - 8: GSM1800 - ANT 1 - 4
Port 9 - 12: UMTS - ANT 1 - 4

6.0 dB +/- 0.6 dB


6.0 dB +/- 0.6 dB
6.0 dB +/- 0.6 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

450 x 250 x 500 mm


N (f)
20 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification


at any time without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevA

EGANT

ANT

CELLULAR COMPONENTS

3G / UMTS Upgrade Module

Existing indoor
System
GSM900, GSM1800
CDMA/AMPS

3G/UMTS

2G - 3G / UMTS

Save money
Connects 3G / UMTS to existing 2G
indoor system
This 3G Upgrade Module enables the
connection of 3G / UMTS to your existing
2G infrastructure. This is a cost effective
solution when adding 3G to your system.
2G systems are easily connected to the
Upgrade Module and then combined with
the 3G system, which in turn makes all
systems available at the common antenna
port.

Installing the 3G Upgrade Module will render


you instantaneous savings since it enables
you to use your existing antenna system.
Moreover, it eliminates the cost of additional
feeders, grounding kits, clamps, installation
and maintenance.

Technical Specifications for the 3G / UMTS Upgrade Module


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1:
Port 2:

EG 601 0002
806 - 960 MHz & 1710 - 1880 MHz
1920 - 2170 MHz

Insertion loss:
Port 1:
Port 2:

< 0.7 dB (0.5 typ)


< 0.5 dB (0.2 typ)

Input return loss:


Isolation between systems:

> 18.0 dB
> 50 dB

Max input power/port:


Port 1:
Port 2:

< 250 W
< 100 W

Impedance in/out:

50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

480 x 434 x 140 mm


7/16 (f)
11 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:

-40 to +70 C
Relative 5 - 100%
IP65

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevB

EGANT

CELLULAR COMPONENTS

Multi Operator Combiner


1 x CDMA / GSM900, 4 x UMTS
5 Inputs to 2 Antenna Ports

Combines 5 RBSs into 4 antenna ports


This Multi Operator Combiner enables 5 Radio Base Stations to connect to the combiner:
1 GSM900 Radio Base Stations
4 UMTS Radio Base Stations
The combiner combines the 5 signals to the
4 antenna ports, or splits the signal to the 5
RBSs in the receiving direction. This is a
highly important function when designing
shared antenna systems wishing to connect
multiple RBSs to the shared antennas.

Save money by installing our Multi


Operator Combiner
By utilizing our Multi Operator Combiner
you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation
for each system. By simply connecting the
RBSs into the combiner it will immediately
render you all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
EG 601 0003

EG 601 0004

806 - 960 MHz


1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

806 - 960 MHz


1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

Insertion loss:
Port 1 GSM900 - ANT 1 - 4:
Port 2 - 5 UMTS - ANT1 - 4:

< 7.0 dB (6.5 typ)


< 7.0 dB (6.5 typ)

< 7.0 dB (6.5 typ)


< 7.0 dB (6.5 typ)

Test port -30 dB:

-30 dB +/- 0.5 dB

-30 dB +/- 0.5 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 40 dBm:

> 18.0 dB
> 50 dB
> 30 dB
< 150 dBc

> 18.0 dB
> 50 dB
> 30 dB
< 150 dBc

Max input power/port:


Impedance in/out:

100 W
50 Ohm

100 W
50 Ohm

494 x 214 x 500 mm


N (f)
15 kg

494 x 214 x 500 mm


7/16 (f)
15 kg

-30 to +70 C
Relative 5 - 100%

-30 to +70 C
Relative 5 - 100%

Product number:
Passband:
Port 1 CDMA / GSM900:
Port 2 UMTS:
Port 3 UMTS:
Port 4 UMTS:
Port 5 UMTS:

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

Environmental Specifications
Temp. range (normal operation):
Humidity:
Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevB

EGANT

CELLULAR COMPONENTS

Multi Operator Combiner


1xCDMA, 3xGSM1800, 4xUMTS
8 Ports In - 4 Ports Out
1 Monitor Port

Save money by installing our Multi


Operator Combiner
Combines 8 RBSs into 4 antenna ports
This Multi Operator Combiner enables 8 Radio
Base Stations to connect to the combiner:
1 CDMA Radio Base Stations
3 GSM1800 Radio Base Stations
4 UMTS Radio Base Stations
The combiner combines the 8 signals to the
4 antenna ports, or splits the signal to the 8
RBSs in the receiving direction. This is a highly
important function when designing shared
antenna systems wishing to connect multiple
RBSs to the shared antennas.

By utilizing our Multi Operator Combiner


you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation
for each system. By simply connecting the
RBSs into the combiner it will immediately
render you all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
EG 601 0069

EG 601 0070

820 - 890 MHz


1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

820 - 890 MHz


1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

Insertion loss:
Port 1 GSM900 - ANT 1 - 4:
Port 2 - 4 GSM1800 - ANT 1 - 4:
Port 5 - 8 UMTS - ANT 1 - 4:

< 8.5 dB (7 dB typ)


< 8.5 dB (7 dB typ)
< 8.5 dB (7 dB typ)

< 8.5 dB (7 dB typ)


< 8.5 dB (7 dB typ)
< 8.5 dB (7 dB typ)

Monitoring port 30dB

-30dB +/- 2dB

-30dB +/- 2dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 70 dB
> 30 dB
< 140 dBc

> 18.0 dB
> 70 dB
> 30 dB
< 140 dBc

Max input power/port:


Impedance in/out:

100 W
50 Ohm

100 W
50 Ohm

494 x 214 x 500 mm


N (f)
30 kg

494 x 214 x 500 mm


7/16 (f)
30 kg

-30 to +70 C
Relative 5 - 100%

-30 to +70 C
Relative 5 - 100%

Product number:
Passband:
Port 1 GSM900 / CDMA:
Port 2 GSM1800:
Port 3 GSM1800:
Port 4 GSM1800:
Port 5 UMTS:
Port 6 UMTS:
Port 7 UMTS:
Port 8 UMTS:

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

Environmental Specifications
Temp. range (normal operation):
Humidity:
Egant reserves the right to change this product specification at any time
without notice.

Antenna 4 Ports (all systems)

1920 - 2170 MHz 4 Ports

820 - 960 MHz 1 Ports

Monitor Port -30 dB

1710 - 1880 MHz 3 Ports

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevA

EGANT

CELLULAR COMPONENTS

ANT1

Multi Operator Combiner


UMTS
3 Inputs - 1 Output

EG 601 007

UMTS

UMTS
UMTS

Save money by installing our Multi


Operator Combiner

Combines 3 UMTS signals into 1


antenna port
This Multi Operator Combiner enables the connection of 3 RBSs/repeaters to the combiner.
The combiner combines the 3 signals to the
antenna port, or splits the signal to the 3 RBSs in
the receiving way. This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.

By utilizing our Multi Operator Combiner


you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation
for each system. By simply connecting the
RBSs into the combiner it will immediately
render you all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 - 3 UMTS:

EG 601 0007
1920 - 2170 MHz

Insertion loss:
Port 1 - 3 UMTS - ANT 1:

< 5.0 dB

Input return loss:


Isolation between same systems:

> 18.0 dB
> 25 dB

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

300 x 100 x 350 mm


7/16 (f)
15 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevB

EGANT

ANT2

CELLULAR COMPONENTS

ANT1

Multi Operator Combiner

GSM 1800

GSM 1800

UMTS

GSM 900

GSM 900

2 x GSM900, GSM1800
4 Inputs to 2 Antenna Ports

Combines 4 RBSs into 2 antenna ports


This Multi Operator Combiner enables 4 Radio
Base Stations to connect to the combiner:
2 GSM900 Radio Base Stations
2 GSM1800 Radio Base Stations
The combiner combines the 4 signals to the
2 antenna ports, or splits the signal to the 4
RBSs in the receiving direction. This is a highly important function when designing shared
antenna systems wishing to connect multiple
RBSs to the shared antennas.

Save money by installing our Multi


Operator Combiner
By utilizing our Multi Operator Combiner
you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation for
each system. By simply connecting the RBSs
into the combiner it will immediately render
you all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 GSM900:
Port 2 GSM900:

EG 601 0089

Port 3 GSM1800:
Port 4 GSM1800:

1710 - 1880 MHz


1710 - 1880 MHz

Insertion loss:
Port 1 - 2 GSM900 - ANT 1 - 2:
Port 3 - 4 GSM1800 - ANT 1 - 2:

< 4.0 dB (typ 3.3 dB)


< 4.0 dB (typ 3.4 dB)

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

880 - 960 MHz


880 - 960 MHz

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

300 x 400 x 120 mm


7/16 (f)
8 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone:+46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevA

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 - 3 UMTS:

EG 601 0007
1920 - 2170 MHz

Insertion loss:
Port 1 - 3 UMTS - ANT 1:

< 5.0 dB

Input return loss:


Isolation between same systems:

> 18.0 dB
> 25 dB

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

300 x 100 x 350 mm


7/16 (f)
15 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevB

EGANT

ANT1

CELLULAR COMPONENTS

ANT2

Multi Operator Combiner

UMTS

GSM 1800
UMTS
UMTS

GSM 900
GSM 900
GSM 900
GSM 1800
GSM 1800

3 x GSM900, GSM1800, UMTS


9 Inputs to 2 or 4 Antenna Ports

Save money by installing our Multi


Operator Combiner
Combines GSM900 / GSM1800 / UMTS
into 2 or 4 antenna ports
This Multi Operator Combiner enables a
maximum of 9 Radio Base Stations to connect
to the combiner:
3 GSM900 Radio Base Stations
3 GSM1800 Radio Base Stations
3 UMTS Radio Base Stations
The combiner combines the 9 signals to the
2 (4) antenna ports, or splits the signal to the
9 RBSs in the receiving direction. This is a
highly important function when designing
shared antenna systems wishing to connect
multiple RBSs to the shared antennas.

By utilizing our Multi Operator Combiner


you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation
for each system. By simply connecting the
RBSs into the combiner it will immediately
render you all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 GSM900:
Port 2 GSM900:
Port 3 GSM900:
Port 4 GSM1800:
Port 5 GSM1800:
Port 6 GSM1800:
Port 7 UMTS:
Port 8 UMTS:
Port 9 UMTS:

EG 601 0014

EG 601 0015

806 - 960 MHz


806 - 960 MHz
806 - 960 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

806 - 960 MHz


806 - 960 MHz
806 - 960 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

Antenna ports:

Insertion loss:
Port 1 - 3 GSM900 - ANT 1 - 2 + 3 - 4:
Port 4 - 6 GSM1800 - ANT 1 - 2 + 3 - 4:
Port 7 - 9 UMTS - ANT 1 - 4 + 3 - 4:

< 7.0 dB
< 7.0 dB
< 7.0 dB

< 7.0 dB
< 7.0 dB
< 7.0 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 20.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

> 20.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

60 W
50 Ohm

300 x 400 x 180 mm


7/16 (f)
22 kg

300 x 400 x 180 mm


7/16 (f)
22 kg

-30 to +70 C
Relative 5 - 100%

-30 to +70 C
Relative 5 - 100%

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

Environmental Specifications
Temp. range (normal operation):
Humidity:
Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevB

EGANT CELLULAR COMPONENTS

Multi Operator Combiner


4x GSM900 / 4x GSM1800
4 Inputs to 2 Antenna Ports

Multi Opertor Combiner


EG 601 0031

Combines GSM900/ GSM1800


into 2 Antenna-ports.
The Multi Operator Combiner allows you to
connect a maximum of 2 Radio Base Stations
to the Combiner.
2 GSM900 Radio Base Stations
The Combiner combines the 4 signals to the
2-Antenna ports or in the receiving way
splits the signal to the 2 RBSs.
The product is also available for GSM1800.
This is a extremely important function when
you are designing shared antenna systems
and like to connect multiple RBSs to the
same antennas.

EGANT

CELLULAR COMPONENTS

Save money by using our Multi Operator Combiner.


By using our Multi Operator Combiner you
will reduce the cost of antennas, feeders and
installation cost.
You will not need to make one antenna
installation for each system, just plug your
RBSs into the combiner and it will give you
the benefit of share all antennas.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
EG 601 0031

EG 601 0032

806 - 960MHz
806 - 960MHz
806 - 960MHz
806 - 960MHz

1710-1880MHz
1710-1880MHz
1710-1880MHz
1710-1880MHz

Insertionloss
Port1+3 - ANT1
Port2+4 - ANT2

< 0.3 dB
< 0.3 dB

< 0.3 dB
< 0.3 dB

Coupling (1INPUT 2-OUT)


Port1+3 - ANT1
Port2+4 - ANT2

3.0 dB +/- 0,5dB


3.0 dB +/- 0,5dB

3.0 dB +/- 0,5dB


3.0 dB +/- 0,5dB

Input return loss:


Isolation between Systems:
Intermodulation 2x43dBm

> 18.0 dB
> 25 dB
< 117 dBm (160dBc)

> 18.0 dB
> 25 dB
< 117 dBm (160dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

60 W
50 Ohm

200 x 200 x 120 mm


7/16 (f)
9kg

200 x 200 x 120 mm


7/16 (f)
9kg

- 30 to + 70 C
Relative 5 - 100%

- 30 to + 70 C
Relative 5 - 100%

Product number:
Passband
Port1: Tx/Rx1
Port2: Rx2
Port3: Tx/Rx1
Port4: Rx2

Mechanical Specifications
Dimensions (WxHxD):
Connectors:
Weight:

Environmental Specifications
Temp. range (normal operation):
Humidity:

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone:+46 (0)8 62 00 650
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevA

EGANT

CELLULAR COMPONENTS

Multi Operator Combiner


4 x GSM900, 4 x GSM1800
8 Inputs to 2 Antenna Ports
Multi Operator Combiner
EG 601 0030

Save money by installing our Multi


Operator Combiner
Combines GSM900 / GSM1800 into 2
antenna ports
This Multi Operator Combiner enables 4 Radio
Base Stations to connect to the combiner:
4 GSM900 Radio Base Stations
4 GSM1800 Radio Base Stations
The combiner combines the 8 signals to the 2
antenna ports, or splits the signal to the 8 RBSs in
the receiving direction. This is a highly important
function when designing shared antenna systems
wishing to connect multiple RBSs to the shared
antennas.

By utilizing our Multi Operator Combiner


you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient
need to make one antenna installation for
each system. By simply connecting the RBSs
into the combiner it will immediately render
you all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 GSM900 Tx / Rx 1:
Port 2 GSM900 Rx 2:
Port 3 GSM900 Tx / Rx 1:
Port 4 GSM900 Rx 2:

EG 601 0030

Port 5 GSM1800 Tx / Rx 1:
Port 6 GSM1800 Rx 2:
Port 7 GSM1800 Tx / Rx 1:
Port 8 GSM1800 Rx 2:

1710 - 1880 MHz


1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz

Insertion loss:
Port 1 - 4 GSM900 - ANT 1 - 4:
Port 5 - 8 GSM1800 - ANT 1 - 4:

< 1.0 dB (typ. 0.3 dB)


< 1.0 dB (typ. 0.3 dB)

Coupling (1 INPUT 2 - OUT):


Port 1 + 3 GSM900 - ANT 1:
Port 2 + 4 GSM900 - ANT 2:

3.0 dB +/- 0.5 dB


3.0 dB +/- 0.5 dB

Port 5 + 7 GSM1800 - ANT 1:


Port 6 + 8 GSM1800 - ANT 2:

3.0 dB +/- 0.5 dB


3.0 dB +/- 0.5 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

806 - 960 MHz


806 - 960 MHz
806 - 960 MHz
806 - 960 MHz

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

300 x 400 x 180 mm


7/16 (f)
15 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone:+46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevB

EGANT CELLULAR COMPONENTS


ANT1

EGANT

ANT3

ANT2

CELLULAR COMPONENTS

ANT4

Multi Operator Combiner


4 x GSM900, GSM1800, UMTS
1 x TETRA / PMR, FM
14 Inputs to 4 Antenna Ports

TETRA / PMR

UMTS
UMTS
UMTS
UMTS

GSM 1800

GSM 1800

GSM 1800
GSM 1800

GSM 900

GSM 900
GSM 900
GSM 900

FM

Save money by installing our Multi


Operator Combiner

Combines GSM900 / GSM1800 / UMTS /


TETRA / FM into 4 antenna ports
The Multi Operator Combiner enables a maximum of 14 Radio Base Stations to connect to
the combiner:
4 GSM900 Radio Base Stations
4 GSM1800 Radio Base Stations
4 UMTS Radio Base Stations
1 TETRA / PMR Radio Base Station
1 FM Radio Base Station
The combiner combines the 14 signals to the
4 antenna ports, or splits the signal to the 14
RBSs in the receiving direction. This is a very
important function when designing shared
antenna systems wishing to connect multiple
RBSs to the shared antennas.

By utilizing our Multi Operator Combiner


you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation
for each system. By simply connecting the
RBSs into the combiner it will render you all
the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 GSM900 - 1:
Port 2 GSM900 - 2:
Port 3 GSM900 - 3:
Port 4 GSM900 - 4:
Port 5 GSM1800 - 1:
Port 6 GSM1800 - 2:
Port 7 GSM1800 - 3:
Port 8 GSM1800 - 4:
Port 9 UMTS - 1:
Port 10 UMTS - 2:
Port 11 UMTS - 3:
Port 12 UMTS - 4:
Port 13 TETRA (option EG 601 0018):
Port 14 FM (option EG 601 0018):

EG 601 0017
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
1710 -1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
376 - 500 MHz
88 - 108 MHz

Insertion loss:
Port 1 - 4 GSM900 - ANT 1 - 4:
Port 5 - 8 GSM1800 - ANT 1 - 4:
Port 9 - 12 UMTS - ANT 1 - 4:
Port 13 TETRA - ANT 1 - 4:
Port 14 FM - ANT 1 - 4:

< 1.0 dB
< 1.0 dB
< 1.0 dB
< 1.0 dB
< 1.0 dB

Coupling (1 INPUT 4 - OUT):


Port 1, 2, 5, 6, 11, 12 to ANT 1 - 4:
Port 3, 7 to - ANT 3, 4:
Port 3, 7 to - ANT 2 (option EG 601 0019):
Port 4, 8 to - ANT 1, 2:
Port 4, 8 to - ANT 3 (option EG 601 0019):
Port 13 to ANT 1 - 4:
Port 14 to ANT 1 - 4:

6.0 dB +/- 0.5 dB


6.0 dB +/- 0.5 dB
30.0 dB +/- 0.5 dB
6.0 dB +/- 0.5 dB
30.0 dB +/- 0.5 dB
6.0 dB +/- 0.5 dB
6.0 dB +/- 0.5 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors port 1 - 12:
Connectors port 13, 14:
Weight:

300 x 800 x 180 mm


7/16 (f)
N (f)
28 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevB

EGANT

CELLULAR COMPONENTS

ANT1

ANT3

ANT2

ANT4

Multi Operator Combiner

UMTS
GSM1800
GSM1800

GSM 900

GSM 900
GSM 900
GSM 900
UMTS
GSM
900
GSM 900

6 x GSM900, 2 x GSM1800
8 Ports In - 4 Ports Out

Save money by installing our Multi


Operator Combiner
Combines 8 RBSs into 4 antenna ports
This Multi Operator Combiner enables 8 Radio Base Stations to connect to the combiner:
6 GSM900 Radio Base Stations
2 GSM1800 Radio Base Stations
The combiner combines the 8 signals to the
4 antenna ports, or splits the signal to the 8
RBSs in the receiving direction. This is a
highly important function when designing
shared antenna systems wishing to connect
multiple RBSs to the shared antennas.

By utilizing our Multi Operator Combiner


you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation
for each system. By simply connecting the
RBSs into the combiner it will immediately
render you all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 GSM900:
Port 2 GSM900:
Port 3 GSM900:
Port 4 GSM900:
Port 5 GSM900:
Port 6 GSM900:
Port 7 GSM1800:
Port 8 GSM1800:

EG 601 0022
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
1710 - 1880 MHz
1710 - 1880 MHz

Insertion loss:
Port 1 - 4 GSM900 - ANT 1 - 6:
Port 5 - 8 GSM1800 - ANT 1 - 4:

< 10.0 dB
< 7.0 dB

Input return loss:


Isolation between systems:
Isolation between same systems:

> 18.0 dB
> 50 dB
> 25 dB

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

300 x 400 x 120 mm


7/16 (f)
15 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevB

EGANT

CELLULAR COMPONENTS

ANT1
ANT2

Multi Operator Combiner

UMTS
UMTS

UMTS
UMTS

GSM 900

GSM 900
GSM 900
GSM 900

4 x GSM900, UMTS
8 Inputs to 2 Antenna Ports

Save money by installing our Multi


Operator Combiner
Combines 8 RBSs into 4 antenna ports
This Multi Operator Combiner enables 8 Radio
Base Stations to connect to the combiner:
4 GSM900 Radio Base Stations
4 UMTS Radio Base Stations
The combiner combines the 8 signals to the
2 antenna ports, or splits the signal to the 8
RBSs in the receiving direction. This is a highly
important function when designing shared
antenna systems wishing to connect multiple
RBSs to the shared antennas.

By utilizing our Multi Operator Combiner


you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation for
each system. By simply connecting the RBSs
into the combiner it will immediately render
you all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 GSM900:
Port 2 GSM900:
Port 3 GSM900:
Port 4 GSM900:
Port 5 UMTS:
Port 6 UMTS:
Port 7 UMTS:
Port 8 UMTS:

EG 601 0024
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

Insertion loss:
Port 1 - 4 GSM900 - ANT 1 - 2:
Port 5 - 8 UMTS - ANT 1 - 2:

< 7.0 dB
< 7.0 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

300 x 400 x 120 mm


7/16 (f)
15 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone:+46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevB

EGANT

CELLULAR COMPONENTS

ANT1
ANT2

Multi Operator Combiner

UMTS

UMTS

GSM 900

GSM 900

2 x GSM900, UMTS
4 Inputs to 2 Antenna Ports

Combines 8 RBSs into 4 antenna ports


This Multi Operator Combiner enables 4 Radio
Base Stations to connect to the combiner:
2 GSM900 Radio Base Stations
2 UMTS Radio Base Stations
The combiner combines the 4 signals to the
2 antenna ports, or splits the signal to the 4
RBSs in the receiving direction. This is a highly important function when designing shared
antenna systems wishing to connect multiple
RBSs to the shared antennas.

Save money by installing our Multi


Operator Combiner
By utilizing our Multi Operator Combiner
you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation for
each system. By simply connecting the RBSs
into the combiner it will immediately render
you all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 GSM900:
Port 2 GSM900:

EG 601 0025

Port 3 UMTS:
Port 4 UMTS:

1920 - 2170 MHz


1920 - 2170 MHz

Insertion loss:
Port 1 - 2 GSM900 - ANT 1 - 2:
Port 3 - 4 UMTS - ANT 1 - 2:

< 4.0 dB (typ 3.3 dB)


< 4.0 dB (typ 3.4 dB)

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

806 - 960 MHz


806 - 960 MHz

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

300 x 400 x 120 mm


7/16 (f)
9 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone:+46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevB

EGANT

CELLULAR COMPONENTS

ANT1

Multi Operator Combiner

UMTS

GSM 900

GSM 900

2 x GSM900, 1 x UMTS
3 Inputs to 1 Antenna Port

Combines 3 RBSs into 1 antenna port


This Multi Operator Combiner enables 3 Radio
Base Stations to connect to the combiner:
2 GSM900 Radio Base Stations
1 UMTS Radio Base Station
The combiner combines the 3 signals to the
antenna port, or splits the signal to the 3
RBSs in the receiving direction. This is a highly
important function when designing shared antenna systems wishing to connect multiple RBSs
to the shared antennas.

Save money by installing our Multi


Operator Combiner
By utilizing our Multi Operator Combiner
you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation for
each system. By simply connecting the RBSs
into the combiner it will immediately render
you all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 GSM900:
Port 2 GSM900:
Port 3 UMTS:

EG 601 0026
806 - 960 MHz
806 - 960 MHz
1920 - 2170 MHz

Insertion loss:
Port 1 - 2 GSM900 - ANT 1:
Port 3 UMTS - ANT 1:

< 3.5 dB (typ 3.3 dB)


< 0.3 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

300 x 400 x 120 mm


7/16 (f)
5 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone:+46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevA

ANT1

ANT3

EGANT

CELLULAR COMPONENTS

ANT2

Multi Operator Combiner

UMTS
UMTS

UMTS

GSM 900

GSM 900
GSM 900

3 x GSM900, UMTS
6 Inputs to 3 Antenna Ports

Combines 6 RBSs into 3 antenna ports


This Multi Operator Combiner enables 6 Radio
Base Stations to connect to the combiner:
3 GSM900 Radio Base Stations
3 UMTS Radio Base Stations
The combiner combines the 6 signals to the
3 antenna ports, or splits the signal to the 6
RBSs in the receiving direction. This is a highly
important function when designing shared antenna systems wishing to connect multiple RBSs
to the shared antennas.

Save money by installing our Multi


Operator Combiner
By utilizing our Multi Operator Combiner
you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation
for each system. By simply connecting the
RBSs into the combiner it will immediately
render you all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 GSM900:
Port 2 GSM900:
Port 3 GSM900:
Port 4 UMTS:
Port 5 UMTS:
Port 6 UMTS:

EG 601 0027
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

Insertion loss:
Port 1 - 3 GSM900 - ANT 1 - 3:
Port 4 - 6 UMTS - ANT 1 - 3:

< 7.0 dB
< 7.0 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

300 x 400 x 120 mm


7/16 (f)
13 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone:+46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevA

EGANT

CELLULAR COMPONENTS

ANT1

Multi Operator Combiner

GSM 1800

UMTS

GSM 900

GSM 900

2 x GSM900, 1 x GSM1800 1 x UMTS


4 Inputs to 1 Antenna Port

Combines 4 RBSs into 1 antenna port


This Multi Operator Combiner enables 4 Radio
Base Stations to connect to the combiner:
2 GSM900 Radio Base Stations
1 GSM1800 Radio Base Station
1 UMTS Radio Base Station
The combiner combines the 4 signals to the
antenna port, or splits the signal to the 4
RBSs in the receiving direction. This is a highly
important function when designing shared antenna systems wishing to connect multiple RBSs
to the shared antennas.

Save money by installing our Multi


Operator Combiner
By utilizing our Multi Operator Combiner
you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation
for each system. By simply connecting the
RBSs into the combiner it will immediately
render you all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 GSM900:
Port 2 GSM900:
Port 3 GSM1800:
Port 4 UMTS:

EG 601 0028
806 - 960 MHz
806 - 960 MHz
1710 -1880 MHz
1920 - 2170 MHz

Insertion loss:
Port 1 - 2 GSM900 - ANT 1:
Port 3 GSM1800 - ANT 1:
Port4 UMTS - ANT 1:

< 3.5 dB (typ 3.3 dB)


< 0.3 dB
< 0.5 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

300 x 400 x 120 mm


7/16 (f)
7 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone:+46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevA

EGANT

CELLULAR COMPONENTS

ANT

Multi Operator Combiner


3 x GSM1800, 3 x UMTS
6 Inputs to 1 Antenna Port

UMTS

UMTS

UMTS

GSM1800

GSM1800

GSM1800

Combines 6 RBSs into 1 antenna port


This Multi Operator Combiner enables 6 Radio
Base Stations to connect to the combiner:
3 GSM1800 Radio Base Stations
3 UMTS Radio Base Stations
The combiner combines the 6 signals to the antenna port, or splits the signal to the 6
RBSs in the receiving direction. This is a highly
important function when designing shared antenna systems wishing to connect multiple RBSs
to the shared antennas.

Save money by installing our Multi


Operator Combiner
By utilizing our Multi Operator Combiner
you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation
for each system. By simply connecting the
RBSs into the combiner it will immediately
render you all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1: GSM1800
Port 2: GSM1800
Port 3: GSM1800
Port 4: UMTS
Port 5: UMTS
Port 6: UMTS

EG 601 0050
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

Insertion loss:
Port 1 - 3: GSM1800 - ANT
Port 4 - 6: UMTS - ANT

< 5.8 dB
< 5.8 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

350 x 500 x 220 mm


7/16 (f)
14 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone:+46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevA

EGANT

CELLULAR COMPONENTS

Multi Operator Combiner


4 x CDMA800/GSM900
5 x GSM1800
5 x UMTS
1 x WiFi
4 x Antenna Ports
4 x Monitor Ports

Combines up to 15 RBSs into 4 antenna


ports
This Multi Operator Combiner enables up to 15
Radio Base Stations to connect to the combiner:
4 CDMA800/GSM900 Radio Base Stations
5 GSM1800 Radio Base Stations
5 UMTS Radio Base Stations
1 WiFi Radio Base Station
The combiner combines the signals to the
4 antenna ports, or splits the signal to the 15
RBSs in the receiving direction. This is a highly
important function when designing shared
antenna systems wishing to connect multiple
RBSs to the shared antennas.

Save money by installing our Multi


Operator Combiner
By utilizing the Egant Multi Operator Combiner you will reduce the cost of antennas,
feeders and installation. It eliminates the cost
inefficient need to make one antenna installation for each system. By simply connecting
the RBSs into the combiner it will immediately render you all the benefits of antenna
sharing.

Monitoring ports
This product comes equipped with four -30
dB monitoring ports (N(f)).

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
EG 601 0077

EG 601 0078

1710 - 1880 MHz


1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
2400-2500MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

1710 - 1880 MHz


1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
2400-2500MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

Insertion loss:
Port 1: GSM1800 - ANT 1 - 4
Port 2 - 5: GSM1800 - ANT 1 - 4
Port 6: CDMA/GSM900 - ANT 1 - 4
Port 7 - 9: CDMA/GSM900 - ANT 1 - 4
Port 10 WiFi - Ant 1 - 4
Port 11: UMTS - ANT 1 - 4
Port 12 - 15: UMTS - ANT 1 - 4

< 1.7 dB
< 1.2 dB
< 1.7 dB
< 1.2 dB
< 1.2 dB
< 1.7 dB
< 1.2 dB

< 1.7 dB
< 1.2 dB
< 1.7 dB
< 1.2 dB
< 1.2 dB
< 1.7 dB
< 1.2 dB

Coupling:
Port 1 - 3: GSM1800 - ANT 1 - 4
Port 4 - 5: GSM1800 - ANT 1 - 4
Port 6 - 8: CDMA800 - ANT 1 - 4
Port 9: CDMA800 - ANT 1 - 4
Port 10 WiFi - Ant 1 - 4
Port 11 - 13: UMTS - ANT 1 - 4
Port 14 - 15: UMTS - ANT 1 - 4

6.0 dB +/- 0.6 dB


9.0 dB +/- 0.6 dB
6.0 dB +/- 0.6 dB
9.0 dB +/- 0.6 dB
6.0 dB +/- 0.6 dB
6.0 dB +/- 0.6 dB
9.0 dB +/- 0.6 dB

6.0 dB +/- 0.6 dB


9.0 dB +/- 0.6 dB
6.0 dB +/- 0.6 dB
9.0 dB +/- 0.6 dB
6.0 dB +/- 0.6 dB
6.0 dB +/- 0.6 dB
9.0 dB +/- 0.6 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

60 W
50 Ohm

450 x 250 x 500 mm


7/16 (f)
N(f)
N(f)
30.5 kg

450 x 250 x 500 mm


N (f)
N(f)
N(f)
30..5 kg

Product number:
Passband:
Port 1: GSM1800
Port 2: GSM1800
Port 3: GSM1800
Port 4: GSM1800
Port 5: GSM1800
Port 6: CDMA800/GSM900
Port 7: CDMA800/GSM900
Port 8: CDMA800/GSM900
Port 9: CDMA800/GSM900
Port 10: WiFi
Port 11: UMTS
Port 12: UMTS
Port 13: UMTS
Port 14: UMTS
Port 15: UMTS

Mechanical Specifications
Dimensions (W x H x D):
Input connectors:
Output connectors:
Monitoring ports (-30 dB)
Weight:

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevA

EGANT

CELLULAR COMPONENTS

ANT

ANT

Multi Operator Combiner


3 x GSM1800, 3 x UMTS
6 Inputs to 2 Antenna Ports

UMTS

UMTS

UMTS

GSM1800

GSM1800

GSM1800

Combines 6 RBSs into 2 antenna ports


This Multi Operator Combiner enables 6 Radio
Base Stations to connect to the combiner:
3 GSM1800 Radio Base Stations
3 UMTS Radio Base Stations
The combiner combines the 6 signals to the
2 antenna ports, or splits the signal to the 6
RBSs in the receiving direction. This is a highly
important function when designing shared antenna systems wishing to connect multiple RBSs
to the shared antennas.

Save money by installing our Multi


Operator Combiner
By utilizing our Multi Operator Combiner
you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation
for each system. By simply connecting the
RBSs into the combiner it will immediately
render you all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1: GSM1800
Port 2: GSM1800
Port 3: GSM1800
Port 4: UMTS
Port 5: UMTS
Port 6: UMTS

EG 601 0049
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

Insertion loss:
Port 1 - 3: GSM1800 - ANT 1 - 2
Port 4 - 6: UMTS - ANT 1 - 2

< 7.0 dB
< 7.0 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

350 x 500 x 220 mm


7/16 (f)
14 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone:+46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevA

ANT1

ANT3

EGANT

CELLULAR COMPONENTS

ANT2

Multi Operator Combiner

UMTS

UMTS
UMTS

GSM 1800

GSM 1800

GSM 1800

3 x GSM1800, 3xUMTS
6 Inputs to 3 Antenna Ports

Combines 6 RBSs into 3 antenna ports


This Multi Operator Combiner enables 6 Radio
Base Stations to connect to the combiner:
3 GSM1800 Radio Base Stations
3 UMTS Radio Base Stations
The combiner combines the 6 signals to the
3 antenna ports, or splits the signal to the 6
RBSs in the receiving direction. This is a highly
important function when designing shared antenna systems wishing to connect multiple RBSs
to the shared antennas.

Save money by installing our Multi


Operator Combiner
By utilizing our Multi Operator Combiner
you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation
for each system. By simply connecting the
RBSs into the combiner it will immediately
render you all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 GSM900:
Port 2 GSM900:
Port 3 GSM900:
Port 4 UMTS:
Port 5 UMTS:
Port 6 UMTS:

EG 601 0027
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

Insertion loss:
Port 1 - 3 GSM1800 - ANT 1 - 3:
Port 4 - 6 UMTS - ANT 1 - 3:

< 6.3 dB
< 6.3 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 17.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

300 x 400 x 120 mm


7/16 (f)
13 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone:+46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevA

EGANT

CELLULAR COMPONENTS

ANT

Multi Operator Combiner

UMTS
UMTS
UMTS
UMTS

GSM 1800

GSM 1800

GSM 1800
GSM 1800

4 x GSM1800, 4 x UMTS
8 Inputs to 1 Antenna Port

Combines 8 RBSs into 1 antenna port


This Multi Operator Combiner enables 8 Radio
Base Stations to connect to the combiner:
4 GSM1800 Radio Base Stations
4 UMTS Radio Base Stations
The combiner combines the 8 signals to the antenna port, or splits the signal to the 8
RBSs in the receiving direction. This is a highly
important function when designing shared antenna systems wishing to connect multiple RBSs
to the shared antennas.

Save money by installing our Multi


Operator Combiner
By utilizing our Multi Operator Combiner
you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation
for each system. By simply connecting the
RBSs into the combiner it will immediately
render you all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1: GSM1800
Port 2: GSM1800
Port 3: GSM1800
Port 4: GSM1800
Port 5: UMTS
Port 6: UMTS
Port 7: UMTS
Port 8: UMTS

EG 601 0071
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

Insertion loss:
Port 1 - 3: GSM1800 - ANT
Port 4 - 6: UMTS - ANT

< 1,0 dB
< 1,0 dB

Coupling:
Port 1 - 4: GSM1800 - ANT
Port 5 - 8: UMTS - ANT

6,0dB +/- 0.5dB


6.0dB +/- 0.5dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

150 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

350 x 500 x 220 mm


7/16 (f)
24 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone:+46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevA

ANT1

EGANT

CELLULAR COMPONENTS

ANT3

ANT2

ANT4

Multi Operator Combiner

UMTS
UMTS
UMTS
UMTS

GSM1800

GSM1800
GSM1800
GSM1800

4 x GSM1800, UMTS
8 Inputs to 4 Antenna Ports

Save money by installing our Multi


Operator Combiner

Combines 8 RBSs into 4 antenna ports


This multi operator combiner enables 8 Radio
Base Stations to connect to the combiner:
4 GSM1800 Radio Base Stations
4 UMTS Radio Base Stations
The combiner combines the 8 signals to the
4 antenna ports, or splits the signal to the 8 RBSs
in the receiving direction. This is a highly desirable function when designing shared antenna
systems wishing to connect multiple RBSs to the
shared antennas.

By utilizing our Multi Operator Combiner


you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation
for each system. By simply connecting the
RBSs into the combiner it will immediately
render you all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 GSM1800:
Port 2 GSM1800:
Port 3 GSM1800:
Port 4 GSM1800:
Port 5 UMTS:
Port 6 UMTS:
Port 7 UMTS:
Port 8 UMTS:

EG 601 0033
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

Insertion loss:
Port 1 - 4 GSM 1800 - ANT 1 - 4:
Port 5 - 8 UMTS - ANT 1 - 4:

< 1.0 dB
< 1.0 dB

Coupling (1 INPUT - 4 OUT):


Port 1 - 4 GSM 1800 - ANT 1 - 4:
Port 5 - 8 UMTS - ANT 1 - 4:

6.0 dB +/- 0.5 dB


6.0 dB +/- 0.5 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

300 x 400 x 180 mm


7/16 (f)
22 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevB

EGANT

CELLULAR COMPONENTS

ANT1 ANT3
ANT4

UMTS
GSM1800
GSM1800
GSM1800

GSM 900
GSM 900
GSM 900
GSM 900

ANT2

Combines 8 RBSs into 4 antenna ports


This Multi Operator Combiner enables 8 Radio
Base Stations to connect to the combiner:
4 GSM900 Radio Base Stations
4 1800 Radio Base Stations
The combiner combines the 8 signals to the
4 antenna ports, or splits the signal to the 8 RBSs
in the receiving direction. This is a highly important function when designing shared antenna
systems wishing to connect multiple RBSs to the
shared antennas.

Multi Operator Combiner


4 x GSM900, GSM1800
8 Inputs to 4 Antenna Ports

Save money by installing our Multi


Operator Combiner
By utilizing our Multi Operator Combiner you
will reduce the cost of antennas, feeders and
installation. It eliminates the cost inefficient
need to make one antenna installation for each
system. By simply connecting the RBSs into
the combiner it will immediately render you
all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 GSM900:
Port 2 GSM900:
Port 3 GSM900:
Port 4 GSM900:
Port 5 GSM1800:
Port 6 GSM1800:
Port 7 GSM1800:
Port 8 GSM1800:

EG 100 4206
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz

Insertion loss:
Port 1 - 4 GSM900 - ANT 1 - 4:
Port 5 - 8 GSM1800 - ANT 1 - 4:

< 7.0 dB
< 7.0 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

300 x 400 x 120 mm


7/16 (f)
15 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevB

ANT1

EGANT

CELLULAR COMPONENTS

ANT3

ANT2

ANT4

Multi Operator Combiner

UMTS
UMTS
UMTS
UMTS

GSM 900

GSM 900
GSM 900
GSM 900

4 x GSM900, UMTS
8 Inputs to 4 Antenna Ports

Save money by installing our Multi


Operator Combiner
Combines 8 RBSs into 4 antenna ports
This Multi Operator Combiner enables 8 Radio
Base Stations to connect to the combiner:
4 GSM900 Radio Base Stations
4 UMTS Radio Base Stations
The combiner combines the 8 signals to the
4 antenna ports, or splits the signal to the 8 RBSs
in the receiving direction.This is a highly important function when designing shared antenna
systems wishing to connect multiple RBSs to the
shared antennas.

By utilizing our Multi Operator Combiner


you will reduce the cost of antennas, feeders
and installation.It eliminates the cost inefficient need to make one antenna installation
for each system. By simply connecting the
RBSs into the combiner it will immediately
render you all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 GSM900:
Port 2 GSM900:
Port 3 GSM900:
Port 4 GSM900:
Port 5 UMTS:
Port 6 UMTS:
Port 7 UMTS:
Port 8 UMTS:

EG 100 4205
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

Insertion loss:
Port 1 - 4 GSM900 - ANT 1 - 4:
Port 5 - 8 UMTS - ANT 1 - 4:

< 7.0 dB
< 7.0 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

300 x 400 x 120 mm


7/16 (f)
15 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevB

ANT1

EGANT

CELLULAR COMPONENTS

ANT3

ANT2

ANT4

Multi Operator Combiner

UMTS
UMTS
UMTS
UMTS

GSM1800

GSM1800
GSM1800
GSM1800

4 x GSM1800, UMTS
8 Inputs to 4 Antenna Ports

Save money by installing our Multi


Operator Combiner

Combines 8 RBSs into 4 antenna ports


This multi operator combiner enables 8 Radio
Base Stations to connect to the combiner:
4 GSM1800 Radio Base Stations
4 UMTS Radio Base Stations
The combiner combines the 8 signals to the
4 antenna ports, or splits the signal to the 8 RBSs
in the receiving direction. This is a highly desirable function when designing shared antenna
systems wishing to connect multiple RBSs to the
shared antennas.

By utilizing our Multi Operator Combiner


you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation
for each system. By simply connecting the
RBSs into the combiner it will immediately
render you all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
EG 601 0045

EG 601 0046

EG 601 0047

880 - 960 MHz


880 - 960 MHz
880 - 960 MHz
880 - 960 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

1710 - 1880 MHz


1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

1710 - 1880 MHz


1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

Insertion loss:
Port 1 - 4: GSM900 - ANT 1 - 4
Port 5 - 8 (1 - 4): GSM1800 - ANT 1 - 4
Port 9 - 12 (5 - 8): UMTS - ANT 1 - 4

< 1.2 dB
< 1.2 dB
< 1.2 dB

< 1.2 dB
< 1.2 dB
< 1.2 dB

< 1.2 dB
< 1.2 dB
< 1.2 dB

Coupling: (1 IN - 4 OUT)
Port 1 - 4: GSM900 - ANT 1 - 4
Port 5 - 8 (1 - 4): GSM1800 - ANT 1 - 4
Port 9 - 12 (5 - 8): UMTS - ANT 1 - 4

6.0 dB +/- 0.6 dB


6.0 dB +/- 0.6 dB
6.0 dB +/- 0.6 dB

6.0 dB +/- 0.6 dB


6.0 dB +/- 0.6 dB

6.0 dB +/- 0.6 dB


6.0 dB +/- 0.6 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

60 W
50 Ohm

60 W
50 Ohm

450 x 250 x 500 mm


N (f)
SMA (f)
24 kg

450 x 250 x 500 mm


N (f)
SMA (f)
21 kg

450 x 250 x 500 mm


N (f)

-30 to +70 C
Relative 5 - 100%

-30 to +70 C
Relative 5 - 100%

-30 to +70 C
Relative 5 - 100%

Product number:
Passband:
Port 1: GSM900
Port 2: GSM900
Port 3: GSM900
Port 4: GSM900
Port 5 (1): GSM1800
Port 6 (2): GSM1800
Port 7 (3): GSM1800
Port 8 (4): GSM1800
Port 9 (5): UMTS
Port 10 (6): UMTS
Port 11 (7): UMTS
Port 12 (8): UMTS

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Monitoring ports (-30 dB):
Weight:

18 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:
Egant reserves the right to change this product specification
at any time without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevA

EGANT

CELLULAR COMPONENTS

Multi Operator Combiner


5 x GSM1800, 5 x UMTS
4 Antenna Ports

Combines up to 10 RBSs into 4 antenna


ports
This Multi Operator Combiner enables up to 10
Radio Base Stations to connect to the combiner:
5 GSM1800 Radio Base Stations
5 UMTS Radio Base Stations
The combiner combines the signals to the
4 antenna ports, or splits the signal to the 10
RBSs in the receiving direction. This is a highly
important function when designing shared
antenna systems wishing to connect multiple
RBSs to the shared antennas.

Save money by installing our Multi


Operator Combiner
By utilizing the Egant Multi Operator Combiner you will reduce the cost of antennas,
feeders and installation. It eliminates the cost
inefficient need to make one antenna installation for each system. By simply connecting
the RBSs into the combiner it will immediately render you all the benefits of antenna
sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 : GSM1800
Port 2: GSM1800
Port 3: GSM1800
Port 4: GSM1800
Port 5: GSM1800
Port 6: UMTS
Port 7: UMTS
Port 8: UMTS
Port 9: UMTS
Port 10: UMTS

EG 601 0054
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

Insertion loss:
Port 1 - 5: GSM1800 - ANT 1 - 4
Port 6 - 10: UMTS - ANT 1 - 4

< 1.2 dB
< 1.2 dB

Coupling:
Port 1 - 3: GSM1800 - ANT 1 - 4
Port 4 - 5: GSM1800 - ANT 1 - 4
Port 6 - 8: UMTS - ANT 1 - 4
Port 9 - 10: UMTS - ANT 1 - 4

6.0 dB +/- 0.6 dB


9.0 dB +/- 0.6 dB
6.0 dB +/- 0.6 dB
9.0 dB +/- 0.6 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

450 x 250 x 500 mm


N (f)
26 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification


at any time without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevB

ANT1

ANT3

EGANT

CELLULAR COMPONENTS

ANT2

Multi Operator Combiner

UMTS
UMTS

UMTS

GSM 900

GSM 900
GSM 900

3 x GSM900, UMTS
6 Inputs to 3 Antenna Ports

Combines 6 RBSs into 3 antenna ports


This Multi Operator Combiner enables 6 Radio
Base Stations to connect to the combiner:
3 GSM900 Radio Base Stations
3 UMTS Radio Base Stations
The combiner combines the 6 signals to the
3 antenna ports, or splits the signal to the 6
RBSs in the receiving direction. This is a highly
important function when designing shared antenna systems wishing to connect multiple RBSs
to the shared antennas.

Save money by installing our Multi


Operator Combiner
By utilizing our Multi Operator Combiner
you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation
for each system. By simply connecting the
RBSs into the combiner it will immediately
render you all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 GSM900:
Port 2 GSM900:
Port 3 GSM900:
Port 4 UMTS:
Port 5 UMTS:
Port 6 UMTS:

EG 601 0027
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

Insertion loss:
Port 1 - 3 GSM900 - ANT 1 - 3:
Port 4 - 6 UMTS - ANT 1 - 3:

< 7.0 dB
< 7.0 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

300 x 400 x 120 mm


7/16 (f)
13 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone:+46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevA

EGANT

CELLULAR COMPONENTS

ANT1

ANT3

ANT2

ANT4

Multi Operator Combiner

UMTS
UMTS

UMTS
UMTS

GSM 900

GSM 900
UMTS
GSM 900
UMTS

GSM 900
GSM 900
GSM 900

6 x GSM900, 6 x UMTS
12 Ports In - 4 Ports Out

Save money by installing our Multi Operator Combiner


Combines 12 RBSs into 4 antenna ports
This Multi Operator Combiner enables 12 Radio Base Stations to connect to the combiner:
6 GSM900 Radio Base Stations
6 UMTS Radio Base Stations
The combiner combines the 12 signals to the
4 antenna ports, or splits the signal to the 12
RBSs in the receiving direction. This is a highly
important function when designing shared
antenna systems wishing to connect multiple
RBSs to the shared antennas.

By utilizing our Multi Operator Combiner you


will reduce the cost of antennas, feeders and
installation. It eliminates the cost inefficient
need to make one antenna installation for each
system. By simply connecting the RBSs into
the combiner it will immediately render you all
the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port1 GSM900:
Port2 GSM900:
Port3 GSM900:
Port4 GSM900:
Port5 GSM900:
Port6 GSM900:
Port7 UMTS:
Port8 UMTS:
Port9 UMTS:
Port10 UMTS:
Port11 UMTS:
Port12 UMTS:

EG 601 0040
880 - 960 MHz
880 - 960 MHz
880 - 960 MHz
880 - 960 MHz
880 - 960 MHz
880 - 960 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

Insertion loss:
Port 1 - 4 GSM900 - ANT 1 - 4:
Port 5 - 6 GSM900 - ANT 1 - 4:
Port 7 - 10 UMTS - ANT 1 - 4:
Port 11 - 12 UMTS - ANT 1 - 4:

< 10.0 dB (typ. 9.5 dB)


< 7.0 dB, (typ. 6.5 dB)
< 10.0 dB (typ. 9.5 dB)
< 7.0 dB (typ. 6.5 dB)

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

300 x 400 x 180 mm


7/16 (f)
22 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevA

EGANT

ANT1

CELLULAR COMPONENTS

ANT2

Multi Operator Combiner

UMTS
UMTS

UMTS

GSM1800
GSM1800

2 x GSM1800, UMTS
4 Inputs to 2 Antenna Ports

Combines 4 RBSs into 2 antenna ports


This Multi Operator Combiner enables 4 Radio
Base Stations to connect to the combiner:
2 GSM1800 Radio Base Stations
2 UMTS Radio Base Stations
The combiner combines the 4 signals to the
2 antenna ports, or splits the signal to the 4
RBSs in the receiving direction. This is a highly
important function when designing shared antenna systems wishing to connect multiple RBSs
to the shared antennas.

Save money by installing our Multi


Operator Combiner
By utilizing our Multi Operator Combiner
you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation for
each system. By simply connecting the RBSs
into the combiner it will immediately render
you all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 GSM1800:
Port 2 GSM1800:

EG 601 0029

Port 3 UMTS:
Port 4 UMTS:

1920 - 2170 MHz


1920 - 2170 MHz

Insertion loss:
Port 1 - 2 GSM1800 - ANT 1 - 2:
Port 3 - 4 UMTS - ANT 1 - 2:

< 4.0 dB (typ 3.5 dB)


< 4.0 dB (typ 3.5 dB)

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

1710 - 1880 MHz


1710 - 1880 MHz

Mechanical Specifications
Dimensions (WxHxD):
Connectors:
Weight:

300 x 400 x 120 mm


7/16 (f)
11 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone:+46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevA

EGANT

CELLULAR COMPONENTS

ANT

Multi Operator Combiner

UMTS
UMTS
UMTS
UMTS

GSM 900

3 x UMTS, 1 x GSM900
4 Inputs to 1 Antenna Port

Combines 4 RBSs into 1 antenna port


This Multi Operator Combiner enables 4 Radio
Base Stations to connect to the combiner:
1 GSM900 Radio Base Station
3 UMTS Radio Base Stations
The combiner combines the 4 signals to the
1 antenna port, or splits the signal to the 4 RBSs
in the receiving direction. This is a highly important function when designing shared antenna
systems wishing to connect multiple RBSs to the
shared antennas.

Save money by installing our Multi


Operator Combiner
By utilizing our Multi Operator Combiner
you will reduce the cost of antennas, feeders
and installation. It eliminates the cost inefficient need to make one antenna installation
for each system. By simply connecting the
RBSs into the combiner it will immediately
render you all the benefits of antenna sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1 GSM900:
Port 2 UMTS:
Port 3 UMTS:
Port 4 UMTS:

EG 601 0041
880 - 960 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

Insertion loss:
Port 1 GSM900 - ANT 1:
Port 2 - 4 UMTS - ANT1:

< 0.2 dB
< 5.5 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

300 x 400 x 120 mm


7/16 (f)
15 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification at any time
without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevB

EGANT

CELLULAR COMPONENTS

Multi Operator Combiner


2 xCDMA800/GSM900, 4 x GSM1800,
4 x UMTS
4 Antenna Ports

Combines up to 10 RBSs into 4 antenna


ports
This Multi Operator Combiner enables up to 10
Radio Base Stations to connect to the combiner:
2 CDMA800/GSM900 Radio Base Stations
4 GSM1800 Radio Base Stations
4 UMTS Radio Base Stations
The combiner combines the signals to the
4 antenna ports, or splits the signal to the 10
RBSs in the receiving direction. This is a highly
important function when designing shared
antenna systems wishing to connect multiple
RBSs to the shared antennas.

Save money by installing our Multi


Operator Combiner
By utilizing the Egant Multi Operator Combiner you will reduce the cost of antennas,
feeders and installation. It eliminates the cost
inefficient need to make one antenna installation for each system. By simply connecting
the RBSs into the combiner it will immediately render you all the benefits of antenna
sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1: CDMA800/GSM900
Port 2: CDMA800/GSM900

EG 601 0074

EG 601 0075

806 - 960 MHz


806 - 960 MHz

806 - 960 MHz


806 - 960 MHz

Port 3: GSM1800
Port 4: GSM1800
Port 5: GSM1800
Port 6: GSM1800
Port 7: UMTS
Port 8: UMTS
Port 9: UMTS
Port 10: UMTS

1710 - 1880 MHz


1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

1710 - 1880 MHz


1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

Insertion loss:
Port 1 - 2: CDMA800 - ANT 1 - 4
Port 3 - 6: GSM1800 - ANT 1 - 4
Port 7 - 10: UMTS - ANT 1 - 4

< 1.2 dB
< 1.2 dB
< 1.2 dB

< 1.2 dB
< 1.2 dB
< 1.2 dB

Coupling:
Port 1 - 2: CDMA800 - ANT 1 - 4
Port 3 - 6: GSM1800 - ANT 1 - 4
Port 7 - 10: UMTS - ANT 1 - 4

6.0 dB +/- 0.6 dB


6.0 dB +/- 0.6 dB
6.0 dB +/- 0.6 dB

6.0 dB +/- 0.6 dB


6.0 dB +/- 0.6 dB
6.0 dB +/- 0.6 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

60 W
50 Ohm

450 x 250 x 500 mm


7/16 (f)
N(f)
19 kg

450 x 250 x 500 mm


N (f)
N(f)
19 kg

-30 to +70 C
Relative 5 - 100%

-30 to +70 C
Relative 5 - 100%

Mechanical Specifications
Dimensions (W x H x D):
Input connectors:
Output connectors:
Weight:

Environmental Specifications
Temp. range (normal operation):
Humidity:
Egant reserves the right to change this product specification
at any time without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevA

EGANT

CELLULAR COMPONENTS

Multi Operator Combiner


2 x CDMA800/GSM900, 5 x GSM1800,
5 x UMTS
4 Antenna Ports

Combines up to 12 RBSs into 4 antenna


ports
This Multi Operator Combiners enables up to
12 Radio Base Stations to connect to the combiner:
2 CDMA800/GSM900 Radio Base Stations
5 GSM1800 Radio Base Stations
5 UMTS Radio Base Stations
The combiner combines the signals to the
4 antenna ports, or splits the signal to the 12
RBSs in the receiving direction. This is a highly
important function when designing shared
antenna systems wishing to connect multiple
RBSs to the shared antennas.

Save money by installing our Multi


Operator Combiner
By utilizing the Egant Multi Operator Combiner you will reduce the cost of antennas,
feeders and installation. It eliminates the cost
inefficient need to make one antenna installation for each system. By simply connecting
the RBSs into the combiner it will immediately render you all the benefits of antenna
sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1: GSM1800
Port 2: GSM1800
Port 3: GSM1800
Port 4: GSM1800
Port 5: GSM1800
Port 6: CDMA800
Port 7: CDMA800
Port 8: UMTS
Port 9: UMTS
Port 10: UMTS
Port 11: UMTS
Port 12: UMTS

EG 601 0060
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
806 - 960 MHz
806 - 960 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

Insertion loss:
Port 1 - 5: GSM1800 - ANT 1 - 4
Port 6 - 7: CDMA800 - ANT 1 - 4
Port 8 - 12: UMTS - ANT 1 - 4

< 1.2 dB
< 1.2 dB
< 1.2 dB

Coupling:
Port 1 - 3: GSM1800 - ANT 1 - 4
Port 4 - 5: GSM1800 - ANT 1 - 4
Port 6 - 7: CDMA800 - ANT 1 - 4
Port 8 - 10: UMTS - ANT 1 - 4
Port 11 - 12: UMTS - ANT 1 - 4

6.0 dB +/- 0.6 dB


9.0 dB +/- 0.6 dB
6.0 dB +/- 0.6 dB
6.0 dB +/- 0.6 dB
9.0 dB +/- 0.6 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:

450 x 250 x 500 mm


N (f)
28 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification


at any time without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevB

EGANT

CELLULAR COMPONENTS

Multi Operator Combiner


4 x CDMA800/GSM900
5 x GSM1800
5 x UMTS
4 x Antenna Ports

Combines up to 14 RBSs into 4 antenna


ports
This Multi Operator Combiner enables up to 14
Radio Base Stations to connect to the combiner:
4 CDMA800/GSM900 Radio Base Stations
5 GSM1800 Radio Base Stations
5 UMTS Radio Base Stations
The combiner combines the signals to the
4 antenna ports, or splits the signal to the 14
RBSs in the receiving direction. This is a highly
important function when designing shared
antenna systems wishing to connect multiple
RBSs to the shared antennas.

Save money by installing our Multi


Operator Combiner
By utilizing the Egant Multi Operator Combiner you will reduce the cost of antennas,
feeders and installation. It eliminates the cost
inefficient need to make one antenna installation for each system. By simply connecting
the RBSs into the combiner it will immediately render you all the benefits of antenna
sharing.

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
EG 601 0072

EG 601 0073

EG 601 0082

1710 - 1880 MHz


1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

1710 - 1880 MHz


1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

1710 - 1880 MHz


1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

Insertion loss:
Port 1 - 5: GSM1800 - ANT 1 - 4
Port 6 - 9: CDMA/GSM900 - ANT 1 - 4
Port 10 - 14: UMTS - ANT 1 - 4

< 1.2 dB
< 1.2 dB
< 1.2 dB

< 1.2 dB
< 1.2 dB
< 1.2 dB

< 1.2 dB
< 1.2 dB
< 1.2 dB

Coupling:
Port 1 - 3: GSM1800 - ANT 1 - 4
Port 4: GSM1800 - ANT 1 - 4
Port 5: GSM1800 - ANT 1 - 4
Port 6 - 8: CDMA800 - ANT 1 - 4
Port 9: CDMA800 - ANT 1 - 4
Port 10 - 12: UMTS - ANT 1 - 4
Port 13 - 14: UMTS - ANT 1 - 4

6.0 dB +/- 0.6 dB


9.0 dB +/- 0.6 dB
9.0 dB +/- 0.6 dB
6.0 dB +/- 0.6 dB
9.0 dB +/- 0.6 dB
6.0 dB +/- 0.6 dB
9.0 dB +/- 0.6 dB

6.0 dB +/- 0.6 dB


9.0 dB +/- 0.6 dB
9.0 dB +/- 0.6 dB
6.0 dB +/- 0.6 dB
9.0 dB +/- 0.6 dB
6.0 dB +/- 0.6 dB
9.0 dB +/- 0.6 dB

6.0 dB +/- 0.6 dB


9.0 dB +/- 0.6 dB
9.0 dB +/- 0.6 dB
6.0 dB +/- 0.6 dB
9.0 dB +/- 0.6 dB
6.0 dB +/- 0.6 dB
9.0 dB +/- 0.6 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

60 W
50 Ohm

60 W
50 Ohm

450 x 250 x 500 mm


7/16 (f)
N(f)

450 x 250 x 500 mm


N (f)
N(f)

28 kg

28 kg

450 x 250 x 500 mm


7/16(f)
N(f)
N(f)
28 kg

-30 to +70 C
Relative 5 - 100%

-30 to +70 C
Relative 5 - 100%

-30 to +70 C
Relative 5 - 100%

Product number:
Passband:
Port 1: GSM1800
Port 2: GSM1800
Port 3: GSM1800
Port 4: GSM1800
Port 5: GSM1800
Port 6: CDMA800/GSM900
Port 7: CDMA800/GSM900
Port 8: CDMA800/GSM900
Port 9: CDMA800/GSM900
Port 10: UMTS
Port 11: UMTS
Port 12: UMTS
Port 13: UMTS
Port 14: UMTS

Mechanical Specifications
Dimensions (W x H x D):
Input connectors:
Antenna connectors:
Monitoring ports (-30dB)
Weight:

Environmental Specifications
Temp. range (normal operation):
Humidity:
Egant reserves the right to change this product specification
at any time without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevA

EGANT

CELLULAR COMPONENTS

Multi Operator Combiner


4 x CDMA800/GSM900, 5 x GSM1800,
5 x UMTS
4 x Antenna Ports
4 x Monitor Ports

Combines up to 14 RBSs into 4 antenna


ports
This Multi Operator Combiner enables up to 14
Radio Base Stations to connect to the combiner:
4 CDMA800/GSM900 Radio Base Stations
5 GSM1800 Radio Base Stations
5 UMTS Radio Base Stations
The combiner combines the signals to the
4 antenna ports, or splits the signal to the 14
RBSs in the receiving direction. This is a highly
important function when designing shared
antenna systems wishing to connect multiple
RBSs to the shared antennas.

Save money by installing our Multi


Operator Combiner
By utilizing the Egant Multi Operator Combiner you will reduce the cost of antennas,
feeders and installation. It eliminates the cost
inefficient need to make one antenna installation for each system. By simply connecting
the RBSs into the combiner it will immediately render you all the benefits of antenna
sharing.
Monitoring ports
This product comes equipped with four -30
dB monitoring ports (SMA).

Technical Specifications for the Multi Operator Combiner


Below are some typical data. For more detailed information, please contact us.

Electrical Specifications
Product number:
Passband:
Port 1: GSM1800
Port 2: GSM1800
Port 3: GSM1800
Port 4: GSM1800
Port 5: GSM1800
Port 6: CDMA800
Port 7: CDMA800
Port 8: CDMA800
Port 9: CDMA800
Port 10: UMTS
Port 11: UMTS
Port 12: UMTS
Port 13: UMTS
Port 14: UMTS

EG 601 0062
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
1710 - 1880 MHz
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
806 - 960 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz
1920 - 2170 MHz

Insertion loss:
Port 1 - 4: CDMA800 - ANT 1 - 4
Port 5 - 9: GSM1800 - ANT 1 - 4
Port 10 - 14: UMTS - ANT 1 - 4

< 1.2 dB
< 1.2 dB
< 1.2 dB

Coupling:
Port 1 - 3: GSM1800 - ANT 1 - 4
Port 4: GSM1800 - ANT 1 - 4
Port 5: GSM1800 - ANT 1 - 4
Port 6 - 8: CDMA800 - ANT 1 - 4
Port 9: CDMA800 - ANT 1 - 4
Port 10 - 12: UMTS - ANT 1 - 4
Port 13 - 14: UMTS - ANT 1 - 4

6.0 dB +/- 0.6 dB


9.0 dB +/- 0.6 dB
9.0 dB +/- 0.6 dB
6.0 dB +/- 0.6 dB
9.0 dB +/- 0.6 dB
6.0 dB +/- 0.6 dB
9.0 dB +/- 0.6 dB

Input return loss:


Isolation between systems:
Isolation between same systems:
Intermodulation 2 x 43 dBm:

> 18.0 dB
> 50 dB
> 25 dB
< 117 dBm (160 dBc)

Max input power/port:


Impedance in/out:

60 W
50 Ohm

Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Monitoring Ports (-30 dB):
Weight:

450 x 250 x 500 mm


N (f)
SMA
29 kg

Environmental Specifications
Temp. range (normal operation):
Humidity:

-30 to +70 C
Relative 5 - 100%

Egant reserves the right to change this product specification


at any time without notice.

Egant Cellular Components


Box 945
SE-114 79 Stockholm
Sweden
Phone: +46 (0)8 620 06 50
Fax: +46 (0)70 386 53 53
E-mail: info@egant.se
www.egant.se
RevA

Das könnte Ihnen auch gefallen