Beruflich Dokumente
Kultur Dokumente
RoHS compliant
GQ RELAYS (AGQ)
FEATURES
TYPICAL APPLICATIONS
1. High capacity: 2 A
2. Flat compact size
10.6 (L) 7.2 (W) 5.2 (H) mm
.417 (L) .283 (W) .205 (H) inch
3. High sensitivity single side stable
type (Nominal operating power:
100mW) is available
4. Outstanding surge resistance.
1,500 V 10160 s (FCC part 68)
(open contacts)
2,500 V 210 s (Telcordia) (contact
and coil)
5. The use of twin crossbar contacts
ensures high contact reliability
AgPd contact is used because of its
good sulfide resistance. Adopting lowgas molding material. Coil assembly
molding technology which avoids
generating volatile gas from coil.
1. Telephone switchboard
2. Telecommunications equipment
3. Security
4. Measurement equipment
5. Consumer electronic and audio
visual equipment
ORDERING INFORMATION
AGQ 2
Contact arrangement
2: 2 Form C
Operating function
0: Single side stable
1: 1 coil latching
6: High sensitivity single side
stable type
Type of operation
0: Standard type (B.B.M.)
Terminal shape
Nil: Standard PC board terminal
A: Surface-mount terminal A type
S: Surface-mount terminal S type
Nominal coil voltage (DC)
1H: 1.5V 03: 3V 4H: 4.5V 06: 6V 09: 9V
12: 12V 24: 24V
Packing style
Nil: Tube packing
X: Tape and reel packing (picked from 1/2/3/4 pin side)
Z: Tape and reel packing (picked from 5/6/7/8 pin side)
ASCTB7E 201407-T
GQ (AGQ)
TYPES
1. Standard PC board terminal
Nominal coil voltage
1.5 V DC
3 V DC
4.5 V DC
6 V DC
9 V DC
12 V DC
24 V DC
1 coil latching
Part No.
AGQ2101H
AGQ21003
AGQ2104H
AGQ21006
AGQ21009
AGQ21012
AGQ21024
1 coil latching
Part No.
AGQ2101H
AGQ21003
AGQ2104H
AGQ21006
AGQ21009
AGQ21012
AGQ21024
1 coil latching
Part No.
AGQ2101HZ
AGQ21003Z
AGQ2104HZ
AGQ21006Z
AGQ21009Z
AGQ21012Z
AGQ20024Z
AGQ21024Z
AGQ26024Z
2. Surface-mount terminal
1) Tube packing
Nominal coil voltage
1.5 V DC
3 V DC
4.5 V DC
6 V DC
9 V DC
12 V DC
24 V DC
: For each surface-mounted terminal identification, input the following letter. A type: A, S type: S
Standard packing: Tube: 50 pcs.; Case: 1,000 pcs.
: For each surface-mounted terminal identification, input the following letter. A type: A, S type: S
Standard packing: Tape and reel: 900 pcs.; Case: 1,800 pcs.
Notes: 1. Tape and reel packing symbol -Z is not marked on the relay. X type tape and reel packing (picked from 1/2/3/4-pin side) is also available.
2. Please inquire if you require a relay, between 1.5 and 24 V DC, with a voltage not listed.
RATING
1. Coil data
1) Single side stable type
Nominal operating
current
[10%] (at 20C 68F)
Coil resistance
[10%] (at 20C 68F)
1.5 V DC
93.8 mA
16
3 V DC
4.5 V DC
6 V DC
9 V DC
12 V DC
46.7 mA
31 mA
23.3 mA
15.5 mA
11.7 mA
64.2
145
257
579
1,028
Nominal coil
voltage
24
Pick-up voltage
(at 20C 68F)
75%V or less of
nominal voltage*
(Initial)
Drop-out voltage
(at 20C 68F)
10%V or more of
nominal voltage*
(Initial)
V DC
9.6 mA
2,504
Nominal operating
power
140 mW
150%V of
nominal voltage
230 mW
120%V of
nominal voltage
Nominal operating
power
100 mW
150%V of
nominal voltage
1.5 V DC
Nominal operating
current
[10%] (at 20C 68F)
66.7 mA
3 V DC
4.5 V DC
6 V DC
9 V DC
12 V DC
24 V DC
33.3 mA
22.2 mA
16.7 mA
11.1 mA
8.3 mA
5.0 mA
Nominal coil
voltage
Set voltage
(at 20C 68F)
75%V or less of
nominal voltage*
(Initial)
Reset voltage
(at 20C 68F)
75%V or less of
nominal voltage*
(Initial)
Coil resistance
[10%] (at 20C 68F)
22.5
90
202.5
360
810
1,440
4,800
120 mW
ASCTB7E 201407-T
GQ (AGQ)
3) High sensitivity single side stable type
Nominal coil
voltage
Set voltage
(at 20C 68F)
Nominal operating
current
[10%] (at 20C 68F)
Reset voltage
(at 20C 68F)
Coil resistance
[10%] (at 20C 68F)
1.5 V DC
66.7 mA
22.5
3 V DC
4.5 V DC
6 V DC
9 V DC
12 V DC
33.3 mA
22.2 mA
16.7 mA
11.1 mA
8.3 mA
90
202.5
360
810
1,440
24
80%V or less of
nominal voltage*
(Initial)
10%V or more of
nominal voltage*
(Initial)
V DC
5.0 mA
4,800
Nominal operating
power
100 mW
150%V of
nominal voltage
120 mW
120%V of
nominal voltage
2. Specifications
Characteristics
Contact
Rating
Item
Arrangement
Initial contact resistance, max.
Contact material
Nominal switching capacity
Max. switching power
Max. switching voltage
Max. switching current
Min. switching capacity (Reference value)*1
Single side stable
Nominal operating
High sensitivity single side
power
stable type
1 coil latching
Specifications
2 Form C
Max. 100 m (By voltage drop 6 V DC 1A)
Stationary contact: AgPd+Au clad Movable contact: AgPd
2 A 30 V DC, 1 A 30 V DC, 0.3 A 125 V AC (resistive load)
60 W (DC), 30 W (DC), 37.5 V A (AC) (resistive load)
110 V DC, 125 V AC
2A
10A 10 mV DC
140mW (1.5 to 12 V DC), 230mW (24 V DC)
100mW (1.5 to 12 V DC), 120mW (24 V DC)
Min. 1,000M (at 500V DC)
Measurement at same location as Initial breakdown voltage section.
750 Vrms for 1min. (Detection current: 10mA)
1,500 Vrms for 1min. (Detection current: 10mA)
1,000 Vrms for 1min. (Detection current: 10mA)
1,500 V (10160s) (FCC Part 68)
2,500 V (210s) (Telcordia)
Max. 50C
(By resistive method, nominal coil voltage applied to the coil; contact carrying current: 1A.)
Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
(without diode)
Min. 750 m/s2 (Half-wave pulse of sine wave: 6 ms; detection time: 10s.)
Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10s.)
10 to 55 Hz at double amplitude of 5 mm
Min. 5 107 (at 180 cpm)
Min. 5 104 (2 A 30 V DC resistive), Min. 105 (1 A 30 V DC resistive),
Min. 105 (0.3 A 125 V AC resistive) (at 20 cpm)
Ambient temperature:
(Single side stable, 1 coil latching type) 40C to +85C 40F to +185F
(High sensitivity single side stable type) 40C to +70C 40F to +158F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
20 cpm
Approx. 1 g .035 oz
Surge breakdown
voltage (Initial)
Mechanical
characteristics
Expected life
Conditions
Functional
Destructive
Functional
Vibration resistance
Destructive
Mechanical
Shock resistance
Electrical
Unit weight
Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2 Refer to AMBIENT ENVIRONMENT in GENERAL APPLICATION GUIDELINES.
REFERENCE DATA
1. Max. switching capacity
2. Life curve
3. Mechanical life
1.0
0.3
4
50
40
30
DC 30V resistive load
20
100
Contact voltage, V
Pick-up voltage
Max.
Min.
2
AC 125V
resistive load
10
30
Voltage, V
DC resistive load
AC resistive load
Switching current, A
100
0.2
0.4
0.6
0.8
1.0
Switching current, A
1.2
0
0
Drop-out voltage
10
30
Max.
Min.
50
ASCTB7E 201407-T
GQ (AGQ)
4. Electrical life (1A 30V DC resistive load)
90
90
80
Pick-up voltage
70
Max.
Min.
60
50
40
Drop-out voltage
30
80
70
60
50
X
X
40
30
Max.
Min.
20
70
N.C. contact
N.O. contact
Temperature rise, C
100
Contact resistance, m
1A
0A
30
10
0
0
10
No. of operations, 10
40
20
10
5
1A
0A
50
20
10
0
0
4.5V DC type
24V DC type
60
10
No. of operations, 10
100
110
120
130
140
150
Operate time
Release time
Max.
2
Min.
Max.
Min.
Operate time
Release time
Max.
Drop-out
voltage
-40 -20
0
Min.
Max.
Min.
Rate of change, %V
Pick-up
voltage
50
40
30
20
x
x
10
20 40
60
80 100
-10
Ambient temperature, C
-20
-30
-40
70
80
90
100
110
120
130
70
80
90
100
110
120
-50
130
1,000m/s2
Deenergized condition
Energized condition
X
1,000m/s2
Z
1,000m/s2
1,000m/s2
Z'
1,000m/s2
X'
1,000m/s2
Y'
10
5
ON
Pick-up voltage
0
-5
ON
-10
10
OFF
OFF
5
Drop-out voltage
OFF
-5
-10
0
ON
Rate of change, %V
X'
Rate of change, %V
Z X
Z'
Y
Y'
Rate of change, %V
Rate of change, %V
8. Malfunctional shock
CAD Data
ON
Pick-up voltage
0
ON
-5
ON
-10
10
OFF
5
Drop-out voltage
OFF
-5
-10
0
2
4
6
8 10 12
.079 .157 .236 .315 .394 .472
Inter-relay distance , mm inch
10
OFF
2
4
6
8 10 12
.079 .157 .236 .315 .394 .472
Inter-relay distance , mm inch
1. PC board terminal
External dimensions
CAD Data
10.600.3
.417.012
5.200.2
.205.008
PC board pattern
2.20
.087
7.200.3
.283.012
3.20
.126
0.400.1
.016.004
3.200.15
.126.006
2.200.15
.087.006 3.500.3
2.200.15 .138.012
.087.006
0.200.1
.008.004
5.080.15
.200.006
2.20
.087
5.08
.200
2 3 4
7 6 5
1 coil latching
2 3 4
7 6 5
0.85 dia.
.033 dia.
Direction indication
Direction indication
(Deenergized condition)
(Reset condition)
ASCTB7E 201407-T
GQ (AGQ)
2. Surface-mount terminal
CAD Data
External dimensions
Single side stable/1 coil latching/High sensitivity single side stable
Type
Max. 5.40
.213
7.200.3
.283.012
10.600.3
.417.012
A type
2.200.15
.087.006
2.200.15
.087.006
0.400.1
.016.004
3.200.15
.126.006
Max. 5.40
.213
0.200.1
.008.004
2.20
.087
2.20
.087
3.20
.126
2.66 6.74
.105 .265
5.080.15
.200.006
8.400.3
.331.012
0.80
.031
7.200.3
.283.012
10.600.3
.417.012
2.20
.087
2.20
.087
3.20
.126
S type
0.200.1
.008.004
5.080.15
.200.006
2.200.15
.087.006
0.400.1
.016.004
3.200.15
.126.006
2.200.15
.087.006
2.06
.081
6.14
.242
0.80
.031
7.200.3
.283.012
7 6 5
2 3 4
1 coil latcing
8
7 6 5
2 3 4
Direction indication
Direction indication
(Deenergized condition)
(Reset condition)
NOTES
1. Packing style
1) The relay is packed in a tube with the
relay orientation mark on the left side, as
shown in the figure below.
(S type)
(1)-2 Tape dimensions
Relay polarity bar
(Z type)
1.50 +0.1
0 dia.
.059 +.003
.0 dia.
2.0
.079
11.5
.453
Max. 6.55
.256
0.40
.016
24.00.3
.945.012
11.1
.437
7.8
.307
12.0
.472
GQ relays
Stopper (green)
Stopper (red)
mm inch
2. Automatic insertion
To maintain the internal function of the
relay, the chucking pressure should not
exceed the values below.
Chucking pressure in the direction A :
9.8 N {1 kgf} or less
Chucking pressure in the direction B :
9.8 N {1 kgf} or less
Chucking pressure in the direction C :
9.8 N {1 kgf} or less
A
21 dia.
.827 dia.
Stopper (green)
Stopper (red)
2.0
.079
801 dia.
3.150.039 dia.
mm inch
Relay polarity bar
(Z type)
1.50 +0.1
0 dia.
.059 +.003
.0 dia.
2.0
.079
dia.
4.00 2.00
.157 .079 dia.
1.75
.069
3302 dia.
12.992.079 dia.
Max. 6.55
.256
0.40
.016
13 dia.
.512 dia.
11.5
.453 24.00.3
.945.012
11.1
.437
GQ relays
12.0
.472
9.0
.354
ASCTB7E 201407-T