Beruflich Dokumente
Kultur Dokumente
SG7900A/SG7900
FEATURES
These units feature a unique band gap reference which allows the
SG7900A series to be specified with an output voltage tolerance of 1.5%.
The SG7900A versions also offer much improved line regulation characteristics.
All protective features of thermal shutdown, current limiting, and safe-area
control have been designed into these units and since these regulators
require only a single output capacitor (SG7900 series) or a capacitor and
5mA minimum load (SG120 series) for satisfactory performance, ease of
application is assured.
Although designed as fixed-voltage regulators, the output voltage can be
increased through the use of a simple voltage divider. The low quiescent
drain current of the device insures good regulation when this method is
used, especially for the SG120 series.
SCHEMATIC DIAGRAM
**
**
For normal
operation the (VOS)
Sense Pin must be
externally
connected to the
load.
LINFINITY
Microelectronics Inc.
SG7900A/SG7900 SERIES
NEGATIVE REGULATOR
Input Voltage
-35V
-35V
-40V
150C
THERMAL DATA
K Package:
Thermal Resistance-Junction to Case, JC ................. 3.0C/W
Thermal Resistance-Junction to Ambient, JA ............... 35C/W
T Package:
Thermal Resistance-Junction to Case, JC .................. 15C/W
Thermal Resistance-Junction to Ambient, JA ............ 120C/W
IG Package:
Thermal Resistance-Junction to Case, JC ................. 3.5C/W
Thermal Resistance-Junction to Ambient, JA .............. 42C/W
L Package:
Thermal Resistance-Junction to Case, JC .................. 35C/W
Thermal Resistance-Junction to Ambient, JA ............ 120C/W
(Note 2)
CHARACTERISTIC CURVES
FIGURE 1.
MAXIMUM AVERAGE POWER DISSIPATION
FIGURE 2.
QUIESCENT CURRENT VS. LOAD
LINFINITY
FIGURE 3.
TEMPERATURE COEFFICIENT
Microelectronics Inc.
SG7900A/SG7900 SERIES
CHARACTERISTIC CURVES
NEGATIVE REGULATOR
(continued)
FIGURE 4.
SHORTCIRCUIT CURRENT VS. VIN
FIGURE 5.
QUIESCENT CURRENT VS. VIN
FIGURE 7.
DROPOUT CHARACTERISTICS
FIGURE 6.
SHORT CIRCUIT CURRENT VS. VIN
FIGURE 8.
RIPPLE REJECTION VS. FREQUENCY
APPLICATIONS
VOUT = V (REGULATOR)
R2 =
LINFINITY
R 1 + R2
R1
V(REG)
15mA
Microelectronics Inc.
SG7900A/SG7900 SERIES
ELECTRICAL SPECIFICATIONS
(Note 1)
(Unless otherwise specified, these specifications apply over the operating ambient temperatures for SG7905A/SG7905 with -55C TA 150C,
VIN = -10V, IO = 500mA for the K and IG -Power Packages-, IO = 100mA for the T and L packages, CIN = 2F, and COUT = 1.0F. Low duty cycle pulse
testing techniques are used which maintains junction and case temperatures equal to the ambient temperature.)
SG7905A/SG7905
Parameter
Output Voltage
Line Regulation (Note 1)
Load Regulation (Note 1)
Dropout Voltage
Peak Output Current
Short Circuit Current
Ripple Rejection
Output Noise Voltage (rms)
Long Term Stability
Thermal Shutdown
Test Conditions
TJ = 25C
VIN = -7.5V to -25V, TJ = 25C
VIN = -8V to -12V, TJ = 25C
Power Pkgs: IO = 5mA to 1.5A, TJ = 25C
IO = 250mA to 750mA, TJ = 25C
T - Pkg: IO = 5mA to 500mA, TJ = 25C
VIN = -8V to -20V
Power Pkgs: IO = 5mA to 1.0A, P 20W
T - Pkg: IO = 5mA to 500mA, P 2W
Over Temperature Range
TJ = 25C
with Line: VIN = -8V to -25V
with Load: IO = 5mA to 1.0A (Power Packages)
IO = 5mA to 500mA (T)
VO = 100mV, TJ = 25C
Power Pkgs: IO = 1.0A, T - Pkg: IO = 500mA
Power Pkgs: TJ = 25C
T - Pkg: TJ = 25C
Power Pkgs: VIN = -35V, TJ = 25C
T - Pkg: VIN = -35V, TJ = 25C
VIN = 10V, f = 120Hz, TJ = 25C
f = 10Hz to 100KHz (Note 2)
1000hrs. at TJ = 125C
IO = 5mA
SG7905A
SG7905
Min. Typ. Max. Min. Typ. Max.
-4.92 -5.00 -5.08 -4.8 -5.0 -5.2
5
25
50
3
3
12
1
25
15
75
100
15
15
25
15
25
5
30
5
100
-4.85 -5.00 -5.15 -4.70 -5.00 -5.30
-4.85 -5.00 -5.15 -4.70 -5.00 -5.30
2.5
2.5
2.0
2.0
1.3
1.3
0.5
0.5
0.5
0.5
1.1
1.5
0.5
2.3
3.3
1.4
1.2
0.6
54
1.1
2.3
3.3
1.4
1.2
0.6
25
20
175
80
1.5
0.5
54
25
20
175
80
Units
V
mV
mV
mV
mV
mV
V
V
mA
mA
mA
mA
mA
V
A
A
A
A
dB
V/V
mV
C
Note 1. All regulation tests are made at constant junction temperature with low duty cycle testing.
2. This test is guaranteed but is not tested in production.
LINFINITY
Microelectronics Inc.
SG7900A/SG7900 SERIES
ELECTRICAL SPECIFICATIONS
(Note 1)
(Unless otherwise specified, these specifications apply over the operating ambient temperatures for SG7912A/SG7912 with -55C TA 150C,
VIN = -19V, IO = 500mA for the K and IG -Power Packages-, IO = 100mA for the T and L packages, CIN = 2F, and COUT = 1.0F. Low duty cycle pulse
testing techniques are used which maintains junction and case temperatures equal to the ambient temperature.)
SG7912A/SG7912
Parameter
Output Voltage
Line Regulation (Note 1)
Load Regulation (Note 1)
Dropout Voltage
Peak Output Current
Short Circuit Current
Ripple Rejection
Output Noise Voltage (rms)
Long Term Stability
Thermal Shutdown
Test Conditions
TJ = 25C
VIN = -14.5V to -30V, TJ = 25C
VIN = -16V to -22V, TJ = 25C
Power Pkgs: IO = 5mA to 1.5A, TJ = 25C
IO = 250mA to 750mA, TJ = 25C
T - Pkg: IO = 5mA to 500mA, TJ = 25C
VIN = -14.5V to -27V
Power Pkgs: IO = 5mA to 1.0A, P 20W
T - Pkg: IO = 5mA to 500mA, P 2W
Over Temperature Range
TJ = 25C
with Line: VIN = -14.5V to -30V
with Load: IO = 5mA to 1.0A (Power Packages)
IO = 5mA to 500mA (T)
VO = 100mV, TJ = 25C
Power Pkgs: IO = 1.0A, T - Pkg: IO = 500mA
Power Pkgs: TJ = 25C
T - Pkg: TJ = 25C
Power Pkgs: VIN = -35V, TJ = 25C
T - Pkg: VIN = -35V, TJ = 25C
VIN = 10V, f = 120Hz, TJ = 25C
f = 10Hz to 100KHz (Note 2)
1000hrs. at TJ = 125C
IO = 5mA
SG7912A
SG7912
Min. Typ. Max. Min. Typ. Max.
-11.8 -12.0 -12.2 -11.5 -12.0 -12.5
4
60
10
120
30
3
3
60
12
20
90
120
40
4
10
60
10
10
40
240
-11.7 -12.0 -12.3 -11.4 -12.0 -12.6
-11.7 -12.0 -12.3 -11.4 -12.0 -12.6
4
4
3
3
1.0
1.0
0.5
0.5
0.5
0.5
1.1
1.5
0.5
2.3
3.3
1.4
1.2
0.6
1.1
2.3
3.3
1.4
0.2
0.6
25
60
175
80
1.5
0.5
54
54
25
60
175
80
Units
V
mV
mV
mV
mV
mV
V
V
mA
mA
mA
mA
mA
V
A
A
A
A
dB
V/V
mV
C
Note 1. All regulation tests are made at constant junction temperature with low duty cycle testing.
2. This test is guaranteed but is not tested in production.
LINFINITY
Microelectronics Inc.
SG7900A/SG7900 SERIES
ELECTRICAL SPECIFICATIONS
(Note 1)
(Unless otherwise specified, these specifications apply over the operating ambient temperatures for SG7915A/SG7915 with -55C TA 150C,
VIN = -23V, IO = 500mA for the K and IG -Power Packages-, IO = 100mA for the T and L packages, CIN = 2F, and COUT = 1.0F. Low duty cycle pulse
testing techniques are used which maintains junction and case temperatures equal to the ambient temperature.)
SG7915A/SG7915
Parameter
Output Voltage
Line Regulation (Note 1)
Load Regulation (Note 1)
Dropout Voltage
Peak Output Current
Short Circuit Current
Ripple Rejection
Output Noise Voltage (rms)
Long Term Stability
Thermal Shutdown
Test Conditions
TJ = 25C
VIN = -17.5V to -30V, TJ = 25C
VIN = -20V to -25V, TJ = 25C
Power Pkgs: IO = 5mA to 1.5A, TJ = 25C
IO = 250mA to 750mA, TJ = 25C
T - Pkg: IO = 5mA to 500mA, TJ = 25C
VIN = -18.5V to -30V
Power Pkgs: IO = 5mA to 1.0A, P 20W
T - Pkg: IO = 5mA to 500mA, P 2W
Over Temperature Range
TJ = 25C
with Line: VIN = -18.5V to -30V
with Load: IO = 5mA to 1.0A (Power Packages)
IO = 5mA to 500mA (T)
VO = 100mV, TJ = 25C
Power Pkgs: IO = 1.0A, T - Pkg: IO = 500mA
Power Pkgs: TJ = 25C
T - Pkg: TJ = 25C
Power Pkgs: VIN = -35V, TJ = 25C
T - Pkg: VIN = -35V, TJ = 25C
VIN = 10V, f = 120Hz, TJ = 25C
f = 10Hz to 100KHz (Note 2)
1000hrs. at TJ = 125C
IO = 5mA
SG7915A
SG7915
Min. Typ. Max. Min. Typ. Max.
-14.8 -15.0 -15.2 -14.4 -15.0 -15.6
5
75
11
150
3
40
3
75
30
100
12
150
4
50
4
75
10
50
10
240
-14.6 -15.0 -15.4 -14.25 -15.00 -15.75
-14.6 -15.0 -15.4 -14.25 -15.00 -15.75
4
4
3
3
1.0
1.0
0.5
0.5
0.5
0.5
1.1
1.5
0.5
2.3
3.3
1.4
1.2
0.6
54
1.1
2.3
3.3
1.4
1.2
0.6
25
60
175
80
1.5
0.5
54
25
60
175
80
Units
V
mV
mV
mV
mV
mV
V
V
mA
mA
mA
mA
mA
V
A
A
A
A
dB
V/V
mV
C
Note 1. All regulation tests are made at constant junction temperature with low duty cycle testing.
2. This test is guaranteed but is not tested in production.
LINFINITY
Microelectronics Inc.
SG7900A/SG7900 SERIES
NEGATIVE REGULATOR
20-PIN CERAMIC
LEADLESS CHIP CARRIER
L- PACKAGE
Note 1.
2.
3.
4.
5.
6.
Part No.
Ambient
Temperature Range
SG79XXAK/883B
SG7905AK/DESC
SG7912AK/DESC
SG7915AK/DESC
SG79XXAK
SG79XXK/883B
JAN7905K
JAN7912K
JAN7915K
SG79XXK
SG79XXK
-55C to 125C
-55C to 125C
-55C to 125C
-55C to 125C
-55C to 125C
-55C to 125C
-55C to 125C
-55C to 125C
-55C to 125C
-55C to 125C
0C to 125C
SG79XXAT/883B
SG7905AT/DESC
SG7912AT/DESC
SG7915AT/DESC
SG79XXAT
SG79XXT/883B
JAN7905T
JAN7912T
JAN7915T
SG79XXT
-55C to 125C
-55C to 125C
-55C to 125C
-55C to 125C
-55C to 125C
-55C to 125C
-55C to 125C
-55C to 125C
-55C to 125C
-55C to 125C
SG79XXAIG/883B
SG7905AIG/DESC
SG7912AIG/DESC
SG7915AIG/DESC
SG79XXAIG
SG79XXIG/883B
SG79XXIG
-55C to 125C
-55C to 125C
-55C to 125C
-55C to 125C
-55C to 125C
-55C to 125C
-55C to 125C
SG79XXL/883B
SG79XXL
SG7905AL/DESC
SG7912AL/DESC
SG7915AL/DESC
-55C to 125C
-55C to 125C
-55C to 125C
-55C to 125C
-55C to 125C
Connection Diagram
GROUND
2
CASE IS VIN
VOUT
GROUND
VOUT
VIN
CASE IS VIN
Tab is VIN
VOUT
VIN
GROUND
20 19
18
17
16
15
14
9
10 11 12 13
11. N.C.
12. N.C.
13. N.C.
14. N.C.
15. GND
16. N.C.
17. GND
18. N.C.
19. N.C.
20. VIN
LINFINITY
Microelectronics Inc.