Beruflich Dokumente
Kultur Dokumente
DIAL INDICATORS
DIAL TEST INDICATORS
INSTRUMENTS & STANDS
F-1
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Digimatic Indicators
Dial Indicators
Dial Test Indicators
Instruments & Stands
CONTENTS
Digimatic Indicators
Digimatic Indicators
Solar Indicator ID-SS
Indicators ID-N/B
High Accuracy/Functionality Indicator ID-H
Indicator ID-CX
Peak Value Hold Indicator ID-C
Calculating Indicator ID-C
Signal Output Indicator ID-C
Bore Gauge Indicator ID-C
Multi-Function Indicator ID-F
Economical Indicator ID-S
Slim Body Economical Indicator ID-U
Low-Cost Modular Display Unit
Dial Indicators
Compact Dial Indicators
0.01 mm Resolution Dial Indicators
0.001 mm and 0.005 mm Resolution Dial Indicators
Inch Reading Dial Indicators
One Revolution Dial Indicators
Long Stroke Dial Indicators
Long Stroke Large Dial Indicators
Special Purpose Dial Indicators
Back Plunger Dial Indicators
Optional Accessories
Dial Test Indicators
Lever Dial Test Indicators
Horizontal Dial Test Indicator
Vertical and Parallel Face Dial Test Indicators
Pocket Dial Test Indicator
Universal Dial Test Indicator
Optional Accessories
Instruments
i-Checker
UDT-2 Dial Indicator Tester
Calibration Tester
Thickness Gauges
Dial Thickness Gauges
Contact Force Gauge
IP67 Outside Caliper Gauge
IP65 Outside Dial Caliper Gauge
IP67 Inside Caliper Gauge
IP65 Inside Dial Caliper Gauge
Inside Dial Caliper Gauge
Dial Snap Gauges
Stands
Dial Gauge Stands
Magnetic Stands
Comparator Stands
Transfer Stand
V-Block Set
Quick Guide to Dial Gauges and Digital Indicators
Dial Indicators
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
F-2
F-3
F-5
F-7
F-9
F-11
F-12
F-13
F-14
F-15
F-16
F-17
F-18
F-21
F-23
F-25
F-27
F-29
F-31
F-33
F-35
F-36
F-37
F-44
F-45
F-47
F-49
F-51
F-52
F-55
F-57
F-58
F-59
F-61
F-63
F-64
F-65
F-66
F-67
F-68
F-69
F-70
F-71
F-72
F-73
F-74
F-75
Digimatic Indicators
SERIES 543 ABSOLUTE Digimatic Solar Indicator ID-SS
Solar power supply. An environmentally friendly
measuring instrument that does not require
batteries, eliminating the hassle and cost of
battery replacement. Can operate under
minimum light conditions of 40 lux lower than
the level of a warehouse.
Built-in recharger. The large-capacity built-in
recharger allows you to use the indicator for long
periods of time under light conditions below the
minimum level.*
Technical Data
Display:
Scale type:
Measuring force:
Usable positions:
Power supply:
Min. operating light:
Max. response speed:
Stem dia:
Standard contact point:
Functions
Origin set (zero-set), Count direction switching, Data output,
inch/mm reading
Alarm:
Counting value composition error
Insufficient illumination intensity or charge
543-501
543-506
F-3
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Optional Accessories
Inch/Metric
Code No.
With lug
543-501
543-506
Flat
543-501B
543-506B
Resolution
Range
Overall*
Hysteresis*
Repeatability*
Price
.00005"/0.001 mm
.0001"/0.003 mm .0001"/0.002 mm .0001"/0.002 mm
.5"/12.7 mm
.0005"/0.01 mm
.001"/0.02 mm .001"/0.02 mm
.005"/0.01 mm
203.00
102.00
.00005"/0.001 mm
.0001"/0.003 mm .0001"/0.002 mm .0001"/0.002 mm
.5"/12.7 mm
.0005"/0.01 mm
.001"/0.02 mm .001"/0.02 mm
.005"/0.01 mm
203.00
102.00
DIMENSIONS
Unit: mm
10.9
21.6
20
50.1
905338:
SPC data cable (1 m)
32.90
905409:
SPC data cable (2 m)
36.80
02AZD790F: SPC data cable for U-WAVE-T (160 mm)
52.20
02AZE140F: SPC data cable for U-WAVE-T and footswitch
(160/500 mm)
107.00
21EZA198: Plunger lifting lever
5.10
21EZA105: Plunger lifting knob
10.90
540774:
Plunger lifting cable 12.7 mm and 25.4 mm
20.50
264-504-5E: Digimatic Mini-Processor DP-1VR
342.00
Contact points for Mitutoyo's dial indicators (refer to pages
F-37 to F-40 for details)
Interchangeable backs (refer to page F-41 for details)
Measuring stands (refer to pages F-70 to F-73 for details)
SPECIFICATIONS
46.5
17
54.4
.5
0
8 -0.009
7.3
21.2
13.3
M2.5x0.45
S3
Lifting knob
Lifting release
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
F-4
7.6
54
Lifting lever
16
59
Digimatic Indicators
SERIES 543 ABSOLUTE Digimatic Indicators ID-N/B
Our unique ABSOLUTE sensor restores the last
origin position automatically when the indicator
is turned on.
Rated to IP66: can be used satisfactorily even in
adverse environments where the indicator is
subject to splashing by cutting fluid or coolant.
Slim body design (body width: only 35 mm) is
advantageous in multipoint measurement
situations where space is restricted. The LCD
readout can also be rotated 180 to allow reading
from the most convenient direction.
Succeeded in digitalization of the Back Plunger
type widely used for dial indicators for ID-B.
A 5 mm-stroke plunger with a higher degree of
accuracy has been implemented by adopting a
direct reading scale for plunger displacement.
Technical Data
Display:
Scale type:
Max. response speed:
Measuring force:
Stem dia:
Standard contact point:
Battery:
Battery life:
Functions
Zero-setting, Presetting, Direction switching, Tolerance
judgement, Display hold, Data output, inch/mm reading
(inch/mm models), LCD readout rotation
Alarm: Low voltage, Counting value composition error,
Overflow error, Tolerance limit setting error
543-576
543-506
SPECIFICATIONS
35 mm
Inch/Metric
Code No.
Slim type ID-N
543-571
Resolution
.0005", 0.01 mm
.0005"/.00005",
543-576
0.01 mm/0.001 mm
Back plunger type ID-B
543-581
.0005", 0.01 mm
.0005"/.00005",
543-586
0.01 mm/0.001 mm
Price
Range
Accuracy*
.0008", 0.02 mm
.0004"/.00012",
0.01 mm/0.003 mm
174.00
.5", 12.7 mm
.0008", 0.02 mm
.0004"/.00012",
0.01 mm/0.003 mm
186.00
.2", 5 mm
246.00
258.00
F-5
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Unit: mm
ID-N
25
35
20 - 22.5
10 - 13
7.6
2-R
3.2
5
6.5
21.7
ID-B
F
44.3
35
80.5
49.4
6.2
5.6
7.3
40.7
46.3
20 - 22.5
10 - 13
2-R
3.
6.5 25
7.6
0
9.52 -0.03
15.2
88.1
7.3
40.6
Contact point
4-48 UNF
13.3
53.9
15.2
0
9.52 -0.03
66.2
21EAA211:
21EZA146:
21EZA150:
02ACA376:
125317:
238774:
21EAA212:
49.4
6.2
21.7
21EAA194:
21EAA190:
02AZD790G:
02AZE140G:
21EAA210:
DIMENSIONS
66.2
Optional Accessories
Contact point
4-48 UNF
Lifting knob
Sample applications
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
F-6
Digimatic Indicators
SERIES 543 Digimatic High Accuracy/Functionality Indicator ID-H
This new-generation digital indicator offers the
excellent accuracy and functionality expected
from the top class of indicator.
Take advantage of its high accuracy backed up by
0.5 m/.00002" resolution, remote control
functionality via a handheld controller (or an
RS-232C interface) and easy runout
measurements with the well-established analogue
bar display.
Functionality meets the needs of diverse
measurement applications.
Measuring maximum value, minimum value and
runout (difference between a maximum and a
minimum value).
Technical Data
Display:
Power supply:
Positional detection
method:
Max. response speed:
Plunger direction:
Standard contact point:
Lifting lever:
Functions
Zero set, Preset, GO/NG judgement
Max/Min value hold, Runout measurement
Resolution switching
Counting direction switching
Data output, Data hold, Function lock
inch/mm reading (inch/mm models)
Alarm: Over speed error, Setting error, Overflow error
Application
543-562E
Difference/Runout measurement
Example: Indicator travel from points A to D
Difference (or Total Runout) is displayed as A. Dimensions
B (maximum value) and C (minimum value) can be recalled
from memory with a simple key sequence.
543-564E
SPECIFICATIONS
Inch/Metric
Code No.
Range
543-562E
1.2"/30.4 mm
543-564E
2.4"/60.9 mm
Resolution
Accuracy*
.00002", .00005", .00006"/0.0015 mm
.0001"/0.0005 mm,
.0001"/0.0025 mm
0.00 1 mm
Measuring force
Price
2.0N or less
548.00
2.5N or less
631.00
F-7
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Unit: mm
543-562E
543-564E
31
12
11
31
11
90
60
12
60
114
311.3
114
0
9.52 -0.03
30
0
9.52 -0.03
77.3
7.3
30.4
60.9
251.3
60
30
936937:
SPC data cable (1 m)
32.90
965014:
SPC data cable (2 m)
39.10
21EAA131: Connecting cable for RS-232 (2 m)
108.00
02AZD790D: SPC data cable for U-WAVE-T (160 mm)
52.20
02AZE140D: SPC data cable for U-WAVE-T and footswitch
(160/500 mm)
107.00
540774:
Plunger lifting cable (stroke: 30 mm)
20.50
21EZA101: Plunger lifting knob
18.80
101306:
Centre-lug back
2.80
264-504-5E: Digimatic Mini-Processor DP-1VR
342.00
21EZA099: Remote controller
58.50
Contact points for Mitutoyo's dial indicators (refer to pages
F-37 to F-40 for details)
Measuring stands (refer to pages F-70 to F-73 for details)
DIMENSIONS
47.3
Optional Accessories
Lifting knob
Tolerance judgement
Resolution switching
Difference / runout
measurement
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
F-8
Digimatic Indicators
SERIES 543 ABSOLUTE Digimatic Indicator ID-CX
Employing the ABSOLUTE Linear Encoder, the
ID-CX indicator always displays the absolute
position of the plunger from the origin at power on.
Thanks to the ABSOLUTE Linear Encoder,
reliability has been increased due to elimination
of over-speed errors.
Technical Data
Display:
Scale type:
Max. response speed:
Stem dia.:
Standard contact point:
Battery:
Battery life:
Dust/water protection
level:
Functions
Preset, Zeroset, GO/NG judgement, Counting direction
switching, Power ON/OFF, Simplified calculation, Function
lock, Data hold, Data output, inch/mm reading
Alarm:
Low voltage, Counting value composition error,
Overflow error, Tolerance limit setting error
Optional Accessories
905338:
SPC data cable (1 m)
32.90
905409:
SPC data cable (2 m)
36.80
02AZD790F: SPC data cable for U-WAVE-T (160 mm)
52.20
02AZE140F: SPC data cable for U-WAVE-T and footswitch
(160/500 mm)
107.00
21EZA198: Plunger lifting lever (12.7 mm/.5" type)
5.10
21EZA105: Plunger lifting knob (12.7 mm/.5" type)*1
10.90
21EZA197: Plunger lifting knob (25.4 mm/1" type)
39.50
21EZA200: Plunger lifting knob (50.8 mm/2" type)
38.00
540774:
Plunger lifting cable (12.7 mm and 25.4 mm)
20.50
02ACA571: Auxiliary plunger spring (25.4 mm/1" type)*2
5.10
02ACA773: Auxiliary plunger spring (50.8 mm/2" type)*2
5.40
264-504-5E: Digimatic Mini-Processor DP-1VR
342.00
Contact points for Mitutoyo's dial indicators (refer to pages
F-37 to F-40 for details)
Interchangeable backs (refer to page F-41 for details)
Measuring stands (refer to pages F-70 to F-73 for details)
543-391B
543-471B
543-491B
SPECIFICATIONS
Inch/Metric
Code No.
Range
Overall*1
Hysteresis*1
Resolution: .0005"/.0001"/.00005"/0.01 mm/0.001 mm
543-391B
.5"/12.7 mm
.0001"/
543-395B
.5"/12.7 mm
0.003 mm
.0001"/
0.002 mm
543-471B
1"/25.4 mm
.0002"/
543-491B
2"/50.8 mm
0.005 mm
Resolution: .0005"/0.01 mm
543-401B
.5"/12.7 mm
.001"/
.001"/
0.02 mm
0.02 mm
543-475B
1"/25.4 mm
Remarks
1.5N or less
.0001"/
0.002 mm
.0005"/
0.02 mm
Low measuring
0.4N - 0.7N
force
1.8N or less*2
Price
253.00
293.00
364.00
2.3N or less*
394.00
0.9N or less
1.8N or less*2
198.00
289.00
F-9
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Weight
Max. measuring
Spring
(approx. 0.1 N)
force
Yes
Yes
0.7 N or less
Yes
No
0.6 N or less
No
Yes
0.4 N or less
No
No
Not guaranteed
Not guaranteed
DIMENSIONS
Unit: mm
Large LCD
Power switch
Data output (when
connected to an
external device)
Data hold (when no
external device is
connected)
11 mm
Actual size
Calculation: f(x) = Ax
330
330
Function locking
Ensures reliability of measurement by locking the settings to
prevent preset function settings from being changed by mistake.
Application example
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
F-10
Digimatic Indicators
SERIES 543 ABSOLUTE Digimatic Peak Value Hold Indicator ID-C
The maximum, minimum, or runout value can be
measured and displayed during measurement.
The ABSOLUTE sensor restores the last origin
position automatically when the indicator is
turned on. It also realizes high reliability by
eliminating over-speed errors.
Technical Data
Display:
Scale type:
Stem dia:
Standard contact point:
Battery:
Battery life:
Dust/water protection
level:
Functions
Preset, Zeroset, Max/Min value hold, Run out value hold,
GO/NG judgement, Counting direction switching, Power
ON/OFF, Data output, inch/mm reading
Alarm:
Low voltage, Counting value composition error,
Overflow error, Tolerance limit setting error
Optional Accessories
543-261B
SPECIFICATIONS
Inch/Metric
Code No.
Range
543-261B
.5"/12.7 mm
Resolution
Accuracy*
Measuring force
.00005"/0.001 mm .00012"/0.003 mm
1.5 N or less
Price
905338:
SPC data cable (1 m)
32.90
905409:
SPC data cable (2 m)
36.80
02AZD790F: SPC data cable for U-WAVE-T (160 mm)
52.20
02AZE140F: SPC data cable for U-WAVE-T and footswitch
(160/500 mm)
107.00
902011:
Plunger lifting lever
2.80
540774:
Plunger lifting cable
20.50
264-504-5E: Digimatic Mini-Processor DP-1VR
342.00
Contact points for Mitutoyo's dial indicators (refer to pages
F-37 to F-40 for details)
Interchangeable backs (refer to page F-41 for details)
Measuring stands (refer to pages F-70 to F-73 for details)
279.00
DIMENSIONS
Unit: mm
10.9
29.3
50.1
20
16.5
54.4
46.5
6.
5
54
60.5
M2.5x0.45
0
8 -0.009
7.3
7.6
21.2
13.3
4.8
F-11
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Functions
Optional Accessories
905338:
SPC data cable (1 m)
32.90
905409:
SPC data cable (2 m)
36.80
02AZD790F: SPC data cable for U-WAVE-T (160 mm)
52.20
02AZE140F: SPC data cable for U-WAVE-T and footswitch
(160/500 mm)
107.00
902011:
Plunger lifting lever
2.80
540774:
Plunger lifting cable
20.50
264-504-5E: Digimatic Mini-Processor DP-1VR
342.00
Contact points for Mitutoyo's dial indicators (refer to pages
F-37 to F-40 for details)
Interchangeable backs (refer to page F-41 for details)
Measuring stands (refer to pages F-70 to F-73 for details)
543-286B
SPECIFICATIONS
Inch/Metric
Code No.
Range
543-286B
.5"/12.7 mm
Resolution (switchable)
.00001"-.05"/
0.0002-1 mm
Accuracy*
Measuring force
.00012"/0.003 mm
1.5 N or less
Price
298.00
DIMENSIONS
10.9
46.5
16.5
54.4
54
60.5
50.1
27.6
M2.5x0.45
8 0.009
4.8
21.2
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
7.3
7.6
F-12
Unit: mm
Digimatic Indicators
SERIES 543 ABSOLUTE Digimatic Signal Output Indicator ID-C
Technical Data
Display:
Scale type:
Stem dia:
Standard contact point:
Dust/water protection
level:
Functions
Signal output (NG/OK/+NG, NPN open collector), Remote
control (hold-reset, preset-recall, zero-set), Preset, Zeroset,
GO/NG judgement, Max/Min/Runout value holding,
Counting direction switching, Power ON/OFF, inch/mm
reading
Alarm:
Counting value composition error, Overflow
error, Tolerance limit setting error
Optional Accessories
902011:
540774:
543-281B
Output pattern
SPECIFICATIONS
Inch/Metric
Code No.
Range
543-281B
.5"/12.7 mm
Resolution
Accuracy*
Measuring force
.00005"/0.001 mm .00012"/0.003 mm
2.0 N or less
Price
420.00
DIMENSIONS
Unit: mm
20
20
Wire
NG OK + NG Composition error
Orange ( NG) Low High High
High
Green (OK)
High Low High
High
Brown (+ NG) High High Low
High
LED
Red Green Red
Red (blinking)
LCD
<
O
>
x.xxE indication
I/O Specifications
Wire
Signal
Black
V (GND)
Red
+V
I/O Description
Connected to minus (-)
terminal
I Power supply (12 - 24VDC)
Orange
NG
Green
OK
Brown
+ NG
Yellow
PRESET_RECALL
ZERO
Blue
HOLD_RESET
Shield
FG
Tolerance judgement
result output:
Only the terminal
corresponding to a
judgement result is set to
the low level.
28.5
10.9
50.1
Cable: 4 m
54
60.5
OUT
Load
SG
Output voltage: Max. 24V
Output current: Max. 30mA
Output saturation voltage: Max. 0.3V
0
8 -0.009
13.5
67.4
43.5
6.5
1000pF
DC+12-24V
7.6
24kW
7.3
13.3
37.2
Input
circuit
Input current:
Max. 10mA
F-13
OUT
1000pF
SG
Functions
Optional Accessories
905338:
905409:
02AZD790F:
02AZE140F:
264-504-5E:
543-265B
SPECIFICATIONS
Inch/Metric
Code No.
Range
543-265B
.5"/12.7 mm
Resolution
Accuracy*
Price
Measuring force
.00005"/0.001 mm .00012"/0.003 mm
1.5 N or less
351.00
DIMENSIONS
10.9
Unit: mm
16.5
54.4
46.5
54
60.5
50.1
29.3
M2.5x0.45
0
8 -0.009
21.2
13.3
4.8
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
7.3
7.6
F-14
ID-C112G
Digimatic Indicators
SERIES 543 ABSOLUTE Digimatic Multi-Function Indicator ID-F
Technical Data
Display:
Scale type:
Max. response speed:
Stem dia:
Standard contact point:
Power supply:
Lifting lever:
Functions
Optional Accessories
543-554E
543-552E
SPECIFICATIONS
Inch/Metric
Resolution
Accuracy*
.00002", .00005", .0001", .0005", .00012"/0.003 mm
.001"/0.001 mm, 0.01 mm
.00024"/0.006 mm
Price
421.00
447.00
Measuring force
1.8N or less
2.3N or less
DIMENSIONS
43.3
66
19.2
11
Unit: mm
66
19.2
43.3
Application
Difference/Runout measurement
Example: Indicator travel from points A to D
Difference (or Total Runout) is displayed as A. Dimensions B
(maximum value) and C (minimum value) can be recalled from
memory with a simple key sequence.
19.5
9.52
Point B
110.6
97.3
84.8
70
83.2
83.2
57.2
85.2
11
0
-0.03
4.8
4.8
7.3
65.3
Point C
52
#4-48UNF
Point D
Point A
0
9.52 -0.03
19.5
40.8
7.3
#4-48UNF
Range
1"/25 mm
2"/50 mm
936937:
SPC data cable (1 m)
32.90
965014:
SPC data cable (2 m)
39.10
02AZD790D: SPC data cable for U-WAVE-T (160 mm)
52.20
02AZE140D: SPC data cable for U-WAVE-T and footswitch
(160/500 mm)
107.00
540774:
Plunger lifting cable (stroke: 25.4 mm)
20.50
21EZA197: Lifting knob for 25 mm/1" model
39.50
21EZA200: Lifting knob for 50 mm/2" model
38.00
101306:
Centre-lug back
2.80
02ACA571: Auxiliary plunger spring for 25 mm/1" model
5.10
02ACA773: Auxiliary plunger spring for 50 mm/2" model
5.40
Contact points for Mitutoyo's dial indicators (refer to pages
F-37 to F-40 for details)
Interchangeable backs (refer to page F-41 for details)
Measuring stands (refer to pages F-70 to F-73 for details)
Code No.
543-552E
543-554E
26
F-15
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
IP42
Functions
Origin-set (Zeroset), Counting direction switching, Power ON/
OFF, Data output, inch/mm reading
Alarm:
Low voltage, Counting value composition error
Optional Accessories
F
543-782
SPECIFICATIONS
Inch/Metric
Code No.
Range
Resolution
Accuracy
Measuring force
543-782
.5"/12.7 mm
.00005"/0.001 mm
.0008"/0.02 mm
2.0N or less
Price
102.00
DIMENSIONS
60.4
10.9
25
20
10.6
52.2
905338:
SPC data cable (1 m)
32.90
905409:
SPC data cable (2 m)
36.80
02AZD790F: SPC data cable for U-WAVE-T (160 mm)
52.20
02AZE140F: SPC data cable for U-WAVE-T and footswitch
(160/500 mm)
107.00
264-504-5E: Digimatic Mini-Processor DP-1VR
342.00
903424:
Plunger lifting lever
3.40
540774:
Plunger lifting cable (stroke: 25.4 mm)
20.50
02ACB610: Post-type back
14.10
02ACB630: Adjustable back
14.10
02ACB640: Offset-lug back
14.10
02ACB650: Magnetic back
26.30
02ACB670: Screw-mount back
14.10
02ACB680: Adjustable-bracket back
41.60
Contact points for Mitutoyo's dial indicators (refer to pages
F-37 to F-40 for details)
Measuring stands (refer to pages F-70 to F-73 for details)
16
21.2
7.3
7.3
4.8
13.3
M2.5x0.45
46.5
54.4
6.
5
58.4
0
8 -0.009
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
F-16
Unit: mm
Digimatic Indicators
SERIES 543 ABSOLUTE Digimatic Slim Body Economical Indicator ID-U
General purpose indicator with the measuring
range of 25.4 mm/ 1".
Cost-effective and user-friendly type which is
equipped with the basic functions necessary.
The ABSOLUTE sensor restores the last origin
position automatically when the indicator
is turned on, and realizes high reliability by
eliminating over-speed errors.
Technical Data
Display:
Scale type:
Max. response speed:
Stem dia:
Standard contact point:
Battery:
Battery life:
Lifting lever:
Dust/water protection
level:
Functions
Origin-set (Zeroset), Counting direction switching, Power ON/
OFF, Data output, inch/mm reading
Alarm:
Low voltage, Counting value composition error
Optional Accessories
905338:
SPC data cable (1 m)
32.90
905409:
SPC data cable (2 m)
36.80
02AZD790F: SPC data cable for U-WAVE-T (160 mm)
52.20
02AZE140F: SPC data cable for U-WAVE-T and footswitch
(160/500 mm)
107.00
264-504-5E: Digimatic Mini-Processor DP-1VR
342.00
540774:
Plunger lifting cable (stroke: 10 mm)
20.50
Contact points for Mitutoyo's dial indicators (refer to pages
F-37 to F-40 for details)
Measuring stands (refer to pages F-70 to F-73 for details)
575-123
SPECIFICATIONS
Inch/Metric
Code No.
Range
Resolution
Accuracy*
Measuring force
575-123
1"/25.4 mm
.0005"/0.01 mm
.0008"/0.02 mm
1.8N or less
Price
137.00
DIMENSIONS
Application example
Unit: mm
0
9.52 -0.03
No. 4-48UNF
F-17
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Optional Accessories
936937:
965014:
214938:
C162-155:
SPECIFICATIONS
Code No.
Applicable input
Number of gauge inputs
Resolution
Display
Price
542-007E
Digimatic code (SPC)
1
0.01, 0.001 mm (automatically set depending on the gauge)
6-digit and a negative [-] sign LED (amber, green, red)
216.00
DIMENSIONS
48
44.4
Unit: mm
96
44.4
6.6
91.4
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
F-18
67
(8)
Dial Indicators
Mitutoyos dial indicators have long been used by many of our customers. In full recognition of their
needs, we have devoted ourselves to the research and development necessary to produce high-quality
and high-accuracy dial indicators. Due to the recent re-acknowledgement of the importance of
measurement technologies, the demands on dial indicators are many and varied: installation in measuring
jigs, mounting in countless types of precision equipment, etc. We offer numerous models with various
dial faces, measuring ranges, graduation styles and environmental resistance ratings. The stems, which
ensure the fixture reliability, and the plungers, which are the basis of accuracy, have excellent resistance
against hard use thanks to the hardened stainless steel construction. 0.01 mm resolution dial indicators
have a grand gear made of stainless steel with high resistance to wear and deformation.
0.001 mm resolution dial indicators employ a sector gear made of a special alloy in order to further
increase the resistance to wear.
F- and S-type dial indicators employ an O-ring to ensure air tightness between the outer frame and the
crystal case in order to prevent water or oil penetration.
Important factors in choosing a dial indicator: the size (bezel diameter), resolution (graduation) and
measuring range. Use the table on the right to help choose a suitable model for your application.
Feature icons
Icon
Feature description
Reverse reading type.
Suitable for depth and step measurement.
One revolution type for easy and error-free
reading.
Double scale spacing type, easy-on-the-eyes.
Shockproof type.
Waterproof type (IP63).
Waterproof type (IP64).
With damper at lowest rest point.
Jewelled bearing type.
F
Dustproof type.
With coaxial revolution counter.
Limit hand
Bezel clamp
Back plunger type.
Dial face
Serial No.
Stem
Plunger (or Spindle)
Contact point
F-19
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Spindle
Stem
Stem-bush
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
F-20
Dial Indicators
SERIES 1 Compact Dial Indicators
Compact dial indicators with outer bezel diameters of 31, 36 and 40 mm for restricted-space
applications in gauging fixtures.
1041S
1045S
1124S
1044S
1013S-10
F
1040S
1411S
SPECIFICATIONS
Metric
Accuracy
RepeatMeasuring
Scale
ability
force
Overall Retrace 1/10 rev 1 rev
0.002 mm 1 mm (0.2 mm) 6 m 2.5 m 2.5 m 5 m
1 m 0-100-0 1.5 N or less
0-50
0.01 mm
3.5 mm
(0.5 mm)
0.01 mm
0-25-0 1.4 N or less
0.01 mm
0-100
13 m 4 m
8 m 11 m
0.01 mm
0-100 0.4 N or less*
3 m
5 mm (1 mm)
0.01 mm
0-100 2.0 N or less
0.01 mm
0-50-0
1.4 N or less
3.5 mm
0.005 mm
12 m 3.5 m 6 m 10 m
0-50
(0.5 mm)
Range
(range/rev)
Price
90.00
60.00
60.00
42.00
58.00
70.00
46.00
70.00
Inch
Code No. Graduation
1923B*2
1925-10
1410S
1411S
1410S-10
1780S
1781S
1506S
1507S
1670S
1671S
1802S-10
1803S-10
*2 Flat-back
.0005"
.0001"
Range
(range/rev)
.05" (.02")
.025" (.01")
Accuracy
First 1 rev / 2.5 rev / 10 rev
.0005" / .005" /
.0002" / .0002" /
.25" (.1")
.001"
.001" / .001" /
.125" (.05")
.0005"
.0005" / .0005" /
.1" (.04")
.0001"
.025" (.01")
.0001" / .0001" /
RepeatMeasuring
Scale
force
Retrace ability
.0016" .0001" 0-10-0
1.8 N or less
.0001" .00003" 0-5-0
0-100
0-50-0
.0002" .0002" 0-100
0-50
0-25-0 1.4 N or less
0-50
0-25-0
.00016" .0001"
0-40
0-20-0
0-10
.0001" .00003"
1.5 N or less
0-5-0
Price
77.80
88.90
61.50
61.50
75.00
61.50
61.50
63.40
63.40
61.50
61.50
86.60
86.60
type.
F-21
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
DIMENSIONS
FEATURES
Metric
Unit: mm
Code No.
16
H
C
B
F
G
ANSI/AGD
Type
E
I
E
I
6.35
6.5
6.35
6.5
H
16
4
4
F
0
9.52 -0.03
M2.5x0.45
0
9.52 -0.03
4
G
4
4
0
8 -0.009
1923B
1925-10
1410S
1411S
1410S-10
1780S
1781S
1506S
1507S
1670S
1671S
1802S-10
1803S-10
6.5
Code No.
16
H
Inch
4
4
ISO/JIS
Type
1013S-10
1040S
1041S
1044S
1044S-15
1044S-60
1045S
1124S
No.4-48UNF
No.4-48UNF
Code No. A
ISO/JIS type
1013S-10 32.5
1040S
32.5
1041S
32.5
1044S
32.5
1044S-15* 32.5
1044S-60 32.5
1045S
32.5
1124S
32.5
49
46
46
47.5
47.5
57
47.5
46
40
40
40
40
40
40
40
40
14.5
14.5
14.5
14.5
14.5
14.5
14.5
14.5
20
20
20
20
20
20
20
20
13.8
13.8
13.8
13.8
13.8
12.2
13.8
13.8
15.2
12.2
12.2
13.7
13.7
24.8
13.7
12.2
38
38
38
38
38
38
38
38
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Code No. A
ANSI/AGD type
1923
15.5
1925-10 15.5
1410S
32.5
1411S
32.5
1410S-10 32.5
1780S
32.5
1781S
32.5
1506S
32.5
1507S
32.5
1670S
32.5
1671S
32.5
1802S-10 32.5
1803S-10 32.5
F-22
38.3
37.5
47.6
47.6
47.6
44.1
44.1
44.1
44.1
43.4
43.4
41.3
41.3
31
31
40
40
40
40
40
40
40
40
40
40
40
12.5
12.5
14.5
14.5
14.5
14.5
14.5
14.5
14.5
14.5
14.5
14.5
14.5
19
19
19
19
19
19
19
19
19
19
19
19
19
15
15
12.8
12.8
12.8
12.8
12.8
12.8
12.8
12.8
12.8
12.5
12.5
7.8
7
14.8
14.8
14.8
11.3
11.3
11.3
11.3
10.6
10.6
8.5
8.5
30
30
38
38
38
38
38
38
38
38
38
38
38
7
7
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
Dial Indicators
SERIES 2 0.01 mm Graduation Dial Indicators
Standard 0.01 mm graduation dial gauges having
a bezel with an outside diameter of 57 mm. All
types come with limit markers and a bezel clamp
as standard.
The bezel clamp and lifting lever (optional) can be
attached to either the right or left side. These
parts can be easily installed and removed without
tools.
Secure adhesion between the bezel and crystal as
well as the use of an O-ring prevents water or oil
penetration.
2047S
2902S
2310S-10
2044S
2045S
2046S
2046S-60
SPECIFICATIONS
Metric
Code No. Graduation
2046S
2046S-60
2047S
2902S
2310S-10
2044S
2044S-60
2044S-09
2045S
Range
(range/rev)
10 mm (1 mm)
0.01 mm
Overall
1 rev
Repeatability
13 m
15 m
5 mm (1 mm)
Accuracy
Retrace 1/10 rev
Scale
Measuring
force
0-100
1.4 N or less
2.5 N or less
0-50-0
100-0
3 m
5 m
10 m
3 m
12 m
0-100
13 m
12 m
0-50-0
F-23
1.4 N or less
2.5 N or less
1.4 N or less
Price
31.60
78.00
46.00
48.00
49.00
44.00
70.00
45.50
45.00
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
DIMENSIONS
FEATURES
Metric
10
6.5
30
12.
H
38.
30
16
Code No.
2046S
2046S-60
2047S
2902S
2310S-10
2044S
2044S-60
2044S-09
2045S
Unit: mm
ISO/JIS
Type
0
8 0.009
4.8
M2.5x0.45
I
Code No.
2046S
2046S-60
2047S
2902S
2310S-10
2044S
2044S-60
2044S-09
2045S
48.8
B
65.2
70
F
F
16.9
12.3
G
19.8
29.2
16.9
19.8
70
12.3
29.2
65.2
16.9
19.8
65.2
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
57
17.7
20
F-24
52
7.6
Dial Indicators
SERIES 2 0.001 mm and 0.005 mm Graduation Dial Indicators
Standard 0.001 mm and 0.005 mm graduation
dial indicators having a bezel with an outside
diameter of 57 mm. All types come with limit
markers and a bezel clamp.
The outer clamp and lifting lever (optional) can
be attached to either the right or left side. These
parts can be easily installed and removed without
tools.
Secure adhesion between the bezel and crystal as
well as the use of an O-ring prevents water or oil
penetration.
2113S-10
2124S-10
F
2110S-10
2109S-10
2119S-10
SPECIFICATIONS
Metric
Code No. Graduation
2109S-10
2110S-10
2110S-70
2113S-10
2119S-10
2124S-10
Range
(range/rev)
Overall
Accuracy
Retrace 1/10 rev
1 rev
Repeatability
1 mm (0.2 mm)
0.001 mm
1 mm (0.1 mm)
Scale
0-100-0
5 m
2 mm (0.2 mm) 7 m
5 mm (0.2 mm) 10 m
0.005 mm 5 mm (0.5 mm) 12 m
2 m
3 m
F-25
2 m
3.5 m
5 m
4 m
5 m
6 m
9 m
0.5 m
1 m
3 m
0-100
0-100-0
0-50
Measuring
force
1.5 N or less
2.0 N or less
1.5 N or less
Price
67.50
82.80
106.00
74.80
92.90
64.00
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
DIMENSIONS
FEATURES
Metric
4
4
10
6.5
16
30
12.
30
4
4
4
4
4
4
4
4
4
4
Code No.
2109S-10
2110S-10
2110S-70
2113S-10
2119S-10
2124S-10
Unit: mm
ISO/JIS
Type
38.
0
8 0.009
4.8
M2.5x0.45
I
Code No.
2109S-10
2110S-10
2110S-70
2113S-10
2119S-10
2124S-10
48.8
B
60.5
66.5
67.5
61
16.9
57
17.7
20
12.3
16.9
60.3
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
F-26
G
15.1
21.1
26.7
15.6
14.9
52
7.6
Dial Indicators
SERIES 2 Inch Reading Dial Indicators
Standard .0001" to 0.001" graduation dial
indicators having a bezel with an outside
diameter of 57 mm.
The outer clamp and lifting lever (optional) can
be attached to either the right or left side. These
parts can be easily installed and removed without
tools.
Secure adhesion between the bezel and crystal as
well as the use of an O-ring prevents water or oil
penetration.
A carbide contact point is used.
FEATURES
Inch
Code No.
2414S
2415S
2922S
2358S-10
2802S-10
2803S-10
2804S-10
2805S-10
2932S-10
4
4
4
4
4
4
4
4
4
4
4
F
2414S
2805S-10
2922S
SPECIFICATIONS
Inch
Code No.
2414S
2415S
2922S
Graduation
Range
(range/rev)
.001"
.5" (.1")
.0005"
2358S-10
2802S-10
2803S-10
2804S-10
2805S-10
Accuracy
First 1 rev / 2.5 rev / 10 rev Retrace
.001"/.001"/.001"
Repeatability
0-100
0-50-0 1.8 N or less
.00016" .0001" 0-25-0
.00003"
2923S-10
.0001"
0-10
59.30
59.30
57.00
92.50
92.50
0-5-0
.0001"
Price
112.00
0-10
.05" (.01")
Measuring
force
.0002" .0002"
.0001"/.0001"/
.0002"
Scale
2.0 N or less
98.70
98.70
0-5-0
89.90
F-27
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
DIMENSIONS
Unit: mm
ANSI/AGD
Type
D
D
E
I
16
H
6.35
0
9.52 -0.03
16
6.5
0
9.52 -0.03
6.35
6.5
4.8
4.8
No.4-48UNF
No.4-48UNF
Code No.
2414S
2415S
2922S
2358S-10
2802S-10
2803S-10
2804S-10
2805S-10
2923S-10
38.9
64.1
22
48.8
38.9
54.3
63.6
12.2
21.5
51.4
57
17.7
19
13.6
9.3
48.8
51.7
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
9.6
F-28
52
7.6
Dial Indicators
SERIES 1 and 2 One Revolution Dial Indicators
Mitutoyos unique shock-proof mechanism is
incorporated, providing improved resistance to
shock due to sudden plunger retraction caused
by impact.
This series has been developed to eliminate the
possibility of reading errors due to miscounting
multiple revolutions.
The dead zone in red indicates accuracy not
guaranteed.
One revolution type Back plunger dial gauges are
also available. (Refer to page F-36 for details.)
2970 Series:
Excellent water- and drip-proof characteristics
(IP43).
Smooth movement thanks to the improved
design of bush and stem.
Application of a hard coating on the surface of
the crystal makes it highly resistant to scratching
and chemical attack.
Lightweight (75 g).
2972
2901S-10
2929S
1929S
2971
2900S-10
SPECIFICATIONS
Metric
Code No.
Series 1
1929S
Series 2
2929S
2929S-62
2900S-10
2900S-72
2901S-10
2971
2972
Accuracy
Overall Retrace 1/10 rev 1 rev
Graduation
Range
(range/rev)
0.01 mm
1 mm (1.4 mm)
11 m
4 m
7 m
0.01 mm
0.8 mm (1 mm)
8 m
3 m
5 m
2 m
2 m
3 m
5 m
0.001 mm
Repeatability
Scale
Measuring
force
65.00
1.4 N or less
2.0 N or less
40-0-40
1.4 N or less
0.5 m
2.0 N or less
80-0-80
25-0-25 1.4 N or less
3 m
50-0-50
65.00
92.00
93.00
99.10
78.60
36.80
31.40
3 m
3 m
Price
Inch
Code No.
Graduation
Range
(range/rev)
Accuracy
First 1 rev / 2.5 rev / 10 rev Retrace
Series 2
2910S-10
2978
2976
.0001"
.001"
.0005"
.008" (.01")
.06" (.079")
.02" (.028")
.0001" / /
.001" / /
.0005" / /
F-29
Repeatability
Scale
Measuring
force
Price
83.30
34.70
36.80
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
DIMENSIONS
FEATURES
Metric
Unit: mm
1929S
Code No.
4
4
4
6.5
16
H
4
4
0
8 -0.009
4
4
4
4
4
4
4
4
1929S
2929S
2929S-62
2900S-10
2900S-72
2901S-10
2971
2972
4
G
Inch
Code No.
2910S-10
2978
2976
I
4
4
4
4
4
M2.5x0.45
ANSI/AGD
Type
ISO/JIS
Type
D
E
I
6.5
16
H
6.35
16
H
6.5
0
9.52 -0.03
4.8
0
9.52 -0.03
4.8
4.8
G
0
8 -0.009
No.4-48UNF
No.4-48UNF
I
M2.5x0.45
Code No.
ISO/JIS type
1929S
2929S
2929S-62
2900S-10
2900S-72
2901S-10
2971*
2972*
ANSI/AGD type
2910S-10
2978*
2976*
32.5
47.5
40
14.5
13.8
13.7
38
6.6
65.2
48.8
43.2
48.8
43.2
66
66.1
65.6
66
51.2
65.3
64.7
19.8
57
17.7
20
55.6
16.2
21
57
17.7
19
13.6
55.6
16.2
21
* Plain back
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
16.9
F-30
20.6
20.7
16.8
17.2
9.1
16.5
15.9
52
7.6
55
52
55
7.6
Dial Indicators
SERIES 2 Long Stroke Dial Indicators
Long stroke dial indicators with a 57 mm outer
frame. All models are equipped with limit
markers and a bezel clamp as standard.
An O-ring is employed to ensure air-tightness
between the outer frame and the crystal case to
prevent water or oil penetration.
Both the stem and the plunger are made of high strength quench-hardened stainless steel suitable
for heavy-duty use.
A carbide-tipped contact point is employed.
2052S
2330S-10
2320S-10
2776S
2050S
2904S
SPECIFICATIONS
Metric
Code No.
2050S
2320S-10
2052S
2330S-10
Graduation
Range
(range/rev)
Accuracy
Overall Retrace 1/10 rev 1 rev
Repeatability
Scale
Measuring
force
20 mm ( 1 mm)
20 m
5 m
8 m
15 m
4 m
30 mm (1 mm)
25 m
7 m
10 m 15 m
5 m
0.01 mm
Price
61.00
61.00
74.60
80.00
Inch
Code No.
2416S
2416S-10
2417S
Graduation
1" (.1")
.001"
2424S-19
2776S
2904S
Accuracy
Range
(range/rev) First 1 rev / 2.5 rev / 10 rev
2" (.1")
.0005"
.001"
1" (.05")
1" (.1")
Retrace
.0002"
Repeatability
Scale
0-100
Measuring
force
1.8 N or less
.0002" 0-50-0
.001" / .001" / .002" /
.00033"
0-100
.003" (first 20 rev)
2.5 N or less
.0005" / .0005" / .0015"
.0001" 0-50
.0002"
.001" / .001" / .002"
.0002" 100-0 1.8 N or less
F-31
Price
59.30
70.30
59.30
110.00
68.00
61.50
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
DIMENSIONS
FEATURES
Metric
Unit: mm
Code No.
2050S
2320S-10
2052S
2330S-10
4
4
4
4
ISO/JIS
Type
ANSI/AGD
Type
E
I
0
8-0.009
16
0
9.52 -0.03
16
6.35
6.5
2416S
2416S-10
2417S
2424S-19
2776S
2904S
6.5
Code No.
Inch
4.8
No.4-48UNF
I
Code No.
ISO/JIS type
2050S
2320S-10
2052S
2330S-10
ANSI/AGD type
2416S
2416S-10
2417S
2424S-19
2776S
2904S
M2.5x0.45
57
17.7
20
16.9
75.2
38.8
76.8
118
142.5
38.9
76.8
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
52
7.6
29.8
88.7
38.9
43.3
57
17.7
19
13.6
34.7
20.9
54.3
59.7
19
13.6
34.7
F-32
7.6
52
9.5
7.6
Dial Indicators
SERIES 3 and 4 Long Stroke Large Dial Indicators
Dial indicators with a large-diameter dial face for
easy reading.
Models with longer measuring ranges are also
available.
Both the stem and the plunger are made of high strength quench-hardened stainless steel suitable
for heavy-duty use.
3046S
*1: Can be attached only to Code No. 3046S, 3047S, 3050S, 3109S-10
and 4046S.
3047S
3050S
3109S-10
4046S
3052S-19
SPECIFICATIONS
Metric
Code No.
Range
(range/rev)
Graduation
3046S
3047S
3050S
3052S-19
0.01 mm
3058S-19
3060S-19*
3062S-19*
3109S-10 0.001 mm
4046S
0.01 mm
Accuracy
Overall Retrace 1/10 rev 1 rev
10 mm (1 mm)
15 m
3 m
5 m
20 mm (1 mm)
30 mm (1 mm)
50 mm (1 mm)
80 mm (1 mm)
100 mm (1 mm)
1 mm (0.2 mm)
10 mm (1 mm)
20 m
25 m
30 m
45 m
50 m
5 m
15 m
5 m
7 m
8 m
8 m
10 m
10 m
Repeatability
3 m
4 m
15 m
5 m
9 m
12 m 20 m
2 m
3 m
2 m
5 m
Scale
Measuring
force
0-100
1.4 N or less
0-50-0
2.0 N or less
2.5 N or less
0-100
3.0 N or less
4 m
10 m
3.2 N or less
0.5 m 0-100-0 1.5 N or less
3 m 0-100 1.4 N or less
Retrace
Repeatability
Price
85.00
85.00
105.00
115.00
126.00
166.00
267.00
116.00
117.00
3060S-19
Inch
Code No.
3414S
3415S
3416S
3417S
Graduation
Accuracy
Range
(range/rev) First 1 rev / 2.5 rev / 10 rev
.5" (.1") .001" / .001" / .001"
.0002"
1" (.1") .001" / .001" / .002"
.001"
3424S-19
3426S-19*
3428S-19*
3802S-10
3803S-10
4887S-19*
2" (.1")
.025"
(.01")
.001"
3" (.1")
.0001" / .0001" /
.0002"
.00033"
Scale
Measuring
force
0-100
0-50-0
1.8 N or less
0-100
0-50-0
0-100
3.0 N or less
3.2 N or less
.0001" .00003"
0-10
2.0 N or less
0-5-0
Price
3062S-19
68.50
68.50
84.70
84.70
95.90
158.00
198.00
99.60
94.90
158.00
F-33
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
DIMENSIONS
FEATURES
Metric
Unit: mm
61.2
61.2
16
71
92
16
92
6.5 0.1
M2.5x0.45
4
4
4
4
4
4
3058S-19
4
4
4
M2.5x0.45
84
84
18.9
0
8 -0.009
18.9
0
8 -0.009
4.8
4.8
I
19.1
4
4
4
4
4
4
21.5
19.1
3414S
3415S
3416S
3417S
3424S-19
3426S-19
3428S-19
3802S-10
3803S-10
4887S-19
Code No.
21
6.5 0.1
0
8 -0.009
4.8
Inch
4
6.5 0.1
4
4
4
4
4
4
4
4
21.5
4046S
16
A
C
4
4
4
4
4
3046S
3047S
3050S
3052S-19
3058S-19
3060S-19
3062S-19
3109S-10
4046S
Code No.
ISO/JIS
Type
M2.5x0.45
ANSI/AGD
Type
Code No.
A
ISO/JIS type
3046S
61.2
3047S
3050S
52.6
3052S-19
72.9
3058S-19
81.9
3060S-19
120.9
3062S-19
141.9
3109S-10
61.2
ANSI/AGD type
3414S
3415S
52.6
3416S
3417S
3424S-19
84
3426S-19
123
3428S-19
144
3803S-10
61.2
3802S-10
3052S-11
72.9
3058S-11
81.9
4887S-19
123
75.5
94
104.3
142.3
202.3
243.3
79
15.9
20.6
25.9
78
17.7
21
43.9
73.9
94.9
25.9
73.4
29.1
39.4
59.4
89.4
109.4
14.1
71
71
21.8
12.6
86.1
149.3
198.1
244.5
34.5
50.6
73.9
94.9
59.7
85.2
110.6
59.7
12.6
8.1
102.4
147.1
198.1
25.9
50.6
66.9
37.5
57.5
85.2
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
78
92
17.7
19
21.5
F-34
Dial Indicators
SERIES 2 Special Purpose Dial Indicators
FEATURES
Metric
Code No.
2048S-10
2046S-80
4
4
4
4
Inch
Code No.
2915S-10
2918S-10
2048S-10
2046S-80
F
Adjustable-hand dial gauge
The hand position can be adjusted independently
of the position of the plunger by rotating the top
knob.
SPECIFICATIONS
Metric
Code No.
Graduation
Range
(range/rev)
2048S-10
2046S-80
0.01 mm
10 mm (1 mm)
Accuracy
Overall Retrace 1/10 rev 1 rev
15 m
3 m
5 m
Repeatability
Scale
Measuring
force
10 m
3 m
0-100
1.4 N or less
5.0 N or less
Repeatability
Scale
Measuring
force
Price
56.40
80.00
Inch
Code No.
Graduation
Range
(range/rev)
Accuracy
First 1 rev / 2.5 rev / 10 rev
Retrace
2915S-10
2918S-10
.001"
.5" (.1")
.0002" .0002"
Price
74.40
74.40
0-100
1.8 N or less
0-50-0
DIMENSIONS
2048S-10
17.7
15.1
2046S-80
17.7
Unit: mm
2915S-10, 2918S-10
20
20
47.4
59.8
Clearance of
peak hold
16
52
57
6.5
16
52
57
6.5
M2.5x0.45
7.6
65.2
16.9
0
8-0.009
7.6
0
8-0.009
19.8
19.5
64.9
16.9
M2.5x0.45
F-35
5
0
9.52 -0.03
No.4-48UNF
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Metric
Code No.
1960
1160
2960F
4
4
4
2960F
1160
1960
SPECIFICATIONS
Metric
Code No.
1960
1160
2960F
90.00
82.00
110.00
Unit: mm
2960F
A
Holding bar (optional)
55.6
28
C
Code No.
1160
1960
0
8-0.009
12.8 23.7
0
8 -0.009
4
L
H
Price
2.16
2.20
2.20
2.16
2.16
2.20
0.01 mm
L
42 mm
81 mm
81 mm
42 mm
42 mm
81 mm
D
6 mm
6 mm
6.35 mm
6.35 mm
8 mm
8 mm
Price
DIMENSIONS
Accuracy
RepeatMeasuring
Scale
force
Overall Retrace 1/10 rev 1 rev ability
1 mm (1.27 mm) 14 m
50-0-50
5 mm (1 mm)
16 m 4 m 8 m 14 m 3 m
0-100 1.4 N or less
1 mm (1.27 mm) 14 m
50-0-50
M2.5x0.45
E
4
M2.5x0.45
22.1
35.6
39.6
21.5
35
22
F
25
28.7
G
13.8
12.8
H
43.3
46
55.6
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
F-36
Optional Accessories
Contact Points for Digimatic and Dial Indicators and Linear Gauges
Ball Point
Ball Point
Unit: mm
Unit: mm
7.3
S3
S3
21AZA319
For waterproof model (w/ groove for rubber boot)
S3
902119
S3
21AZA320
1.8
.118"(3)
21BZB005
Material
Price
5.30
10.20
8.70
2.70
11.70
6.80
3.10
16.50
13.40
2.70
16.50
13.40
7.3
8.3
12.1
14
15
17
25
Price
SD
40.30
33.90
4.20
33.90
40.60
1 mm, carbide
1.5 mm, carbide
1.8 mm, steel
2.5 mm, carbide
4 mm, carbide
5.90
1/4"
Spherical Point
Unit: mm
R2.5 (.16")
( ): For inch type
SR5/32"
Unit: mm
L
1.7
Price
5
10
15
20
25
4.20
4.20
4.20
4.20
4.20
5/32"
1/4"
1/2"
3/4"
7/8"
1"
4.20
3.50
4.20
4.20
3.10
4.20
F-37
Code No.
A: M2.5x0.45
111460
125258
101119
A: 4-48UNF
101205
101204
Radius (SR)
Radius (SR)
Code No.
A: M2.5x0.45
101386
101118
137393
101387
101388
A: 4-48UNF
101184
21AAA031
101185
101186
21AAA034
101187
Unit: mm
1/5"
L
5
Code No.
A: M2.5x0.45
901312
120047
901994
21AZA319
902119
21AZA320
21JAA225
120049
120051
21JAA224
120053
120055
A: 4-48UNF
21BZB005
Code No.
A: M2.5x0.45
21AAA349
21AAA350
101122
21AAA351
21AAA352
SR
Price
5.5
7.9
10
3
5
5
5
5
7
4.90
4.90
4.20
1/2"
3/8"
1/8"
3/32"
.35"
.28"
4.20
4.20
Code No.
A: M2.5x0.45
120058
120059
120060
SR
Price
5.2
7.5
10.5
5
10
10
5
7
10
41.00
47.00
56.20
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Conical Point
Unit: mm
L
5
5.2
(36.8)
Code No.
A: M2.5x0.45
101120
A: 4-48UNF
101190
15
Tip angle
Price
60
10
4.20
60
1/2"
4.20
Code No.
A: M2.5x0.45
120067
Price
56.20
Flat Point
Optimal for use on convex surfaces.
Unit: mm
5.2
Tip angle
Price
90
4.20
Flatness: 3 m
90
4.20
1/4"
Unit: mm
5 (.2")
Code No.
A: M2.5x0.45
101385
A: 4-48UNF
101191
Price
8
10
6.00
33.10
5/16"
1/2"
3/4"
1"
6.00
5.45
6.60
6.50
90
Code No.
A: M2.5x0.45
131365
21AAA340
A: 4-48UNF
133017
21AAA043
21AAA044
21AAA045
3/8"
1/10"
10
Code No.
A: M2.5x0.45
120057
Price
30.10
15
Unit: mm L
Unit: mm
Unit: mm
90
A
Flatness: 5m
0.5
Code No.
A: M2.5x0.45
120068
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Price
54.90
Code No.
A: M2.5x0.45
101117
21AAA341
21AAA342
21AAA343
21AAA344
A: 4-48UNF
101188
101189
F-38
Price
10
15
20
25
30
7.20
33.10
46.70
60.00
66.80
1/2"
3/8"
7.20
7.20
Optional Accessories
Contact Points for Digimatic and Dial Indicators and Linear Gauges
Flat Point
Needle Point
Unit: mm
8
Unit: mm
Flatness: 3 m
Radius (SR)
Code No.
A: M2.5x0.45
120056
Price
12.40
Unit: mm
1.7 (2)
( ): For 120042
Price
5.2
7
10.5
17
22
4.3*
6.5*
9.5*
15**
20**
5
10
10
10
10
34.10
37.90
45.70
80.00
91.50
SR
Price
11
13
21
31
15
17
25
35
0.4
0.2
0.4
0.4
4.20
4.20
4.90
6.25
.27"
.52"
.6"
1"
.016"
.016"
4.40
4.90
Flatness: *3 m, **5 m
Unit: mm
D
d
Code No.
A: M2.5x0.45
137255
137399
Price
7
9
6.4
8
10
10
56.40
60.10
Lever Point
Suitable for use on perpendicular faces, such as
those within mould cavities. Lever can be adjusted
to the required angle.
36
Unit: mm
26.3
3
Code No.
A: M2.5x0.45
120041
120042
120043
21AAA345
21AAA346
Code No.
A: M2.5x0.45
101121
137413
21AAA255
21AAA256
A: 4-48UNF
21AAA030
21AAA046
Code No.
A: M2.5x0.45
120066
21AAA329
120065
21AAA330
21AAA331
21AAA332
21AAA335
21AAA336
120064
21AAA337
21AAA338
137257
21AAA257
21AAA258
21AAA339
Price
0.45
0.45
1
1
1
1
1.5
1.5
1.5
1.5
1.5
2
2
2
2
3
5
3
5
8
10
5
10
13
20
40
8
18
28
40
26.40
105.00
19.30
74.20
77.70
84.50
70.90
105.00
20.80
80.30
94.50
30.60
48.20
42.00
102.00
M1.4x0.3
Code No.
A: M2.5x0.45
900391
A: 4-48UNF
900393
Price
11.10
16.50
F-39
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Extension Rod
5.2
Unit: mm
A
Unit: mm
10
2.5
A
5
Code No.
A: M2.5x0.45
120061
120062
120063
Price
0.4
0.6
1
2
2
4
36.90
36.90
43.00
Roller Point
Suitable for use on a moving workpiece surface, or
where the workpiece needs to slide from the side.
Unit: mm
15
23
10
3
9
R5
Code No.
A: M2.5x0.45
303611
21AAA259A
303612
21AAA259B
303613
21AAA259C
21AAA259F
304146
21AAA259J
21AAA259L
21AAA259M
304147
303614
A: 4-48UNF
139167
301655
301657
301659
Price
10
15
20
25
30
35
50
60
70
75
80
90
100
0.90
2.10
2.20
2.20
2.80
2.40
5.60
6.00
5.10
6.10
6.50
9.00
9.40
1/2"
1"
2"
4"
5.60
2.50
4.80
9.40
Code No.
A: M2.5x0.45
901954
A: 4-48UNF
901991
Price
30.60
30.60
5.25.2
(2")(2")
10
Code No.
21AAA011
5.25.2
(2")(2")
4-48 UNF
4-48 UNF
Code No.
21AAA012
Code No.
A: M2.5x0.45
7822
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Unit: mm
Unit: mm
4-48 UNF
4-48 UNF
M2.5x0.45
M2.5x0.45
9.5 (.35")
9.5 (.35")
Price
25.70
F-40
Price
6.90
9.5 (.35")
9.5 (.35")
M2.5x0.45
M2.5x0.45
Price
7.70
Unit: mm
44
6.5
12
12
455 45
16
20
Unit: mm
Unit: mm
Unit: mm
Unit: mm
36.60
Unit:
Unit: mm
mm
11.7From A
12.7
16
20
44
12.7
12.7
16
20
12.7
12.7
12.7
9.7
22.2
18.5
9.7
722.2
25.5
Series
1 (41 mm)
2 (57 mm)
3, 4
(78, 91 mm)
12.7
18.5
Unit: mm
7.1
6.4
Remarks38
M6x1
M6x1
1/4-20UNF
M6x1
1/4-20UNF
50.2
A
From A
60
9.7
22.2
16
10.5
Code No.
136025
136026
101168
136027
100838
2.5
16
18.5
12.7
12.7
Unit: mm
38
30
7 22.2 25.5
10.5
Series
2 (57 mm)
Remarks
Price
43.00
Unit: mm
60
32
M6 X1
16
Unit: mm
Unit: mm
F-41
18.5
6.4
Code No.
901963
18.5
From A
12.7
50.2
Unit: mm
7.1
11.7
2.5
5.3(6.4)
7
18.5
38
6.4
10.5
5.3(6.4)
38
Unit: mm
M616X1
12.7
12.7
50.2
36.60
38
9.7
30
32
28
M6 X12.5
16
25.5
7.1
6.4
Remarks
Price
7.1 Unit:
mm
10.5A
From A
38 11.7 60
7.20
50.2
38
100837
Series
2 (57 mm)
3, 4
(78, 91 mm)
Unit: mm
mm
Unit:
M6 X16.35
16
Code No.
101167
Unit: mm
10.5
16
20
12.7
50.2
5.3(6.4)
7.1
38
22.2
9.7
25.5
30
6.5
Unit: mm
32
Unit: mm
45
M645X1
28
2.5
Unit: mm
Price
13.30
7.20
7.20
36.60
36.60
Unit: mm
18.5
60
12
Unit: mm
38
50.2
25.5
44
12.712.7
6.4
32
M6 X12.5
38 11.7
7.1 Unit: mm
60
30
16
20
M6 X1
6.35
5.3(6.4)
From A
5.3(6.4)
16
20
8
6.4
10.5A
Unit: mm
Unit: mm
22.80
Unit:
mm
Price
19.90
7.20
7.20
Unit:
mm
Unit: mm
36.60
36.60
M6 X1
Unit: mm
Unit: mm
Unit: mm
326.5
Unit: mm
28
M645X1
5 45 Price
16
20
44 12.7
12.7 12.7
900929
3, 4
(78, 91 mm)
45 45
11.7
2 (57 mm)
32
M6 X1
28
2.5
Remarks
M6x1
M6x1
1/4-28UNF
50.2
5.3(6.4)
M6x1
1/4-28UNF
38
6.5
6.5
Series
2 (57 mm)
3, 4
(78, 91 mm)
Unit: mm
38
45 45
Series
1 (41 mm)
12.7
6.35
Code No.
193173
136023
101170
136024
100840
12.7
3.60
3.60
Unit:
mm
2.80
Unit:
mm
4.80
Unit:
mm
4.80
M6 X16.35
12
Remarks
Unit: mm
11.7From A
30
Unit:
mm
Price
28 45 45
5
12
Application
60
6.5
6.4
A
16
20
Magnetic Back
36.60
6.35
30
12
Unit: mm
Unit: mm
12.7 44
3, 4
(78, 91 mm)
Price
20.30
Unit: mm
7.20
22.2
44
16
20
2 (57 mm)
Unit: mm
326.5
Unit: mm
28
M6 X1 4
45 5
12
5.3(6.4)
6.5
Remarks 8
metric type
metric type
inch type
metric12 type
inch type
M6 X16.35
11.7
455 45
16
20
Series
1 (41 mm)
M6 X1
45 45
12
Unit: mm
6.5
Code No.
900928
Remarks
100839
Series
1 (41 mm)
2 (57 mm)
3, 4
(78, 91 mm)
Unit: mm
Lug-On-Centre Back
Code No.
101210
101040
101306
100691
100797
Code No.
193172
101169
Unit: mm
28 45 45
16
20
Remarks
Price
Unit:
mm
6.5
a = 2.2
1.20
a =122.5 45 45 1.20
2 (57 mm) (F type waterproof
Unit:
mm
3.10
model)
3, 4
a = 3.0
1.80
5
(78, 91 mm)
Series
1 (41 mm)
45 45
12
16
20
100836
Unit:
Unit: mm
mm
6.5
192910
6.35
6.5
12
Code No.
101211
101039
Unit: mm
a
44
Flat Back
Unit: mm
6.5
16
20
Optional Accessories
45 45
7.1 Unit: mm
From A
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
902100
902011
21AZB149
903424
21AZB150
F
Code No.
902100
21AZB149
21AZB150
21BZA205
902011
903424
Remarks
Use for S type Series 1 and F type Series 2 (up to 10 mm/.4" range) dial indicators.
Use for S type Series 2, 3, and 4 dial indicators (up to 10 mm/.4").
Use for S type Series 2 and 3 dial indicators (from 10 mm/.4" up to 20 mm/.8").
Use for F type Series 1 dial indicators.
Use for F type Series 2 dial indicators (up to 10 mm/.4" range).
Use for F type Series 2 dial indicators (up to 20 mm/.8" range) and
Series 3 and 4 dial indicators (up to 10 mm/.4" range).
Code No.
901975
Remarks
For Series 2 only
Price
12.70
Application
Plunger Lifting
Cable
Plunger
Code No.
137693
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Price
0.80
F-42
Price
5.70
2.60
2.90
4.60
2.80
3.40
Optional Accessories
Limit Stickers
These are stuck onto the dial face or crystal of a Series 2 dial indicator (55.6 mm or 57 mm bezel
diameter) to indicate tolerance limits.
10 pieces per set.
Code No.
136420
136421
136422
Remarks
Red (10 sheets)
Green (10 sheets)
Yellow (10 sheets)
Price
5.70
5.70
5.70
Plunger Caps
Plunger caps are available for dial indicators with a range of 10 mm or less.
Code No.
193051
193595
Remarks
Standard
Waterproof
Price
0.80
0.80
Note: When attaching to small dial indicators, the overall height will be
8 mm taller.
F-43
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Feature description
With revolution counter type.
Long stylus type.
Jewelled bearing type.
Double scale spacing type, easy-on-the-eyes.
Dustproof type.
Anti-magnetic type.
Stem 6 mm
Dovetail
Special-alloy sector
gear
Large-pitch
crown gear
Dovetail, 3 positions
(one-piece structure)
Rubber cushion
2 mm carbide-tipped stylus
(Inclination range: 200)
Jewelled bearing
Ballbearing
pivot
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
F-44
High sensitivity and quick response due to low friction jewelled bearings.
513-474E:
Ruby contact point model.
Higher resistance to wear.
Non-magnetic, non-conductive tip allows use in
EDM processes.
FEATURES
Metric
Code No.
513-424E
513-414E
513-404E
513-474E
513-415E
513-426E
513-405E
513-425E
513-401E
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
Inch
Code No.
513-402
513-412
513-403
Metric/inch
Code No.
513-474E
513-409T
513-415E
Inch/metric
Code No.
513-406T
Special Sets:
513-908:
513-907:
513-424E
513-404E
513-414
513-405E
513-425E
513-401E
F-45
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
SPECIFICATIONS
Set Configuration:
Metric and Metric/Inch
Metric
Full set
Swivel clamp
(900321, for
4 mm, 8 mm, dovetail)
Stylus,
1 mm
carbide
point
Metric holding
bar (L: 100 mm)
Stylus,
3 mm
carbide
point
Stem,
4 mm
Basic set
Stylus,
2 mm
contact
point
(carbide)
Indicator
Knurled
clamp ring
Stem, 8 mm
Code No.
Basic Set
513-424E
513-414E
513-404E
513-474E*
513-415E
513-426E
513-405E
513-425E
513-401E
Full Set
513-424T
513-414T
513-404T
513-415T
513-405T
Price
Graduation
Range
Accuracy
Scale
Measuring force
0.01 mm
0.01 mm
0.01 mm
0.01 mm
0.01 mm
0.01 mm
0.002 mm
0.002 mm
0.001 mm
0.5 mm
0.5 mm
0.8 mm
0.8 mm
1 mm
1.5 mm
0.2 mm
0.6 mm
0.14 mm
5 m
10 m
8 m
8 m
10 m
8 m
3 m
6 m
3 m
0-25-0
0-25-0
0-40-0
0-40-0
0-50-0
0-25-0
0-100-0
0-100-0
0-70-0
0.3 N or less
0.2 N or less
0.3 N or less
0.3 N or less
0.2 N or less
0.4 N or less
0.3 N or less
0.4 N or less
0.3 N or less
80.90
82.10
72.30
83.80
89.20
83.30
87.80
102.00
87.80
0.01 mm
0.01 mm
0.01 mm
0.01 mm
0.002 mm
0.5 mm
0.5 mm
0.8 mm
1 mm
0.2 mm
5 m
10 m
8 m
10 m
3 m
0-25-0
0-25-0
0-40-0
0-50-0
0-100-0
0.3 N or less
0.2 N or less
0.3 N or less
0.2 N or less
0.3 N or less
99.70
116.00
87.50
108.00
106.00
Graduation
Range
Accuracy
Scale
Measuring force
.0005"
.0005"
.0001"
.03"
.03"
.008"
.0005"
.0005"
.0001"
0-15-0
0-15-0
0-4-0
0.3 N or less
0.2 N or less
0.3 N or less
72.00
104.00
94.00
.0005"
.0005"
.0001"
.03"
.03"
.008"
.0005"
.0005"
.0001"
0-15-0
0-15-0
0-4-0
0.3 N or less
0.2 N or less
0.3 N or less
102.00
125.00
125.00
Graduation
Range
Accuracy
Scale
Measuring force
3 m
0-10-0/0-3.8-0
0.3 N or less
Inch
Code No.
Basic Set
513-402
513-412
513-403
Full Set
513-402T
513-412T
513-403T
Price
Metric/inch
Set Configuration:
Inch and Inch/Metric
Code No.
Full Set
513-409T
Full set
Price
115.00
Inch/metric
Stylus,
.039"
carbide
point
Stylus,
.118"
carbide
point
Stem,
.157"
Code No.
Full Set
513-406T
Graduation
Range
Accuracy
Scale
Measuring force
.0005"/0.01 mm
.03"/0.7 mm
.0005"
0-15-0/0-35-0
0.3 N or less
Price
108.00
* Provided with a 2 mm ruby contact point as a substitute for 2 mm carbide contact point.
Swivel clamp
(900322, for
.157", 3/8",
dovetail)
Inch
holding bar
(L: 4")
DIMENSIONS
Unit: mm
37
Code No.
513-424E
513-404E
513-474E
513-415E
513-426E
513-405E
513-425E
513-401E
513-414E
513-409
Stylus, .079"
contact point
(carbide)
8.3
0.8
Basic set
Indicator
17
25
Knurled
clamp ring
Stem,
3/8".
41
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
15.5
F-46
L
22.3
20.9
20.9
44.5
22.3
14.7
14.7
12.8
36.8
14.7
D
40
40
40
40
40
40
40
40
40
40
FEATURES
Metric
Code No.
513-454E
513-455E
513-284GE
4
4
4
4
4
4
4
4
4
4
Inch
Code No.
513-452
513-453
513-282GT
Optional Accessories
Swivel clamps, holding bars, stems and styli (refer to pages
F-52 to F-54 for details)
513-454E
513-455E
513-452
513-284GE
513-282GT
F-47
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
SPECIFICATIONS
Set Configuration:
Metric
Metric
Full set
Swivel clamp
(900321, for
4 mm, 8 mm, dovetail)
Stylus,
1 mm
carbide
point
Metric holding
bar (L: 100 mm)
Stylus,
3 mm
carbide
point
Stem,
4 mm
Code No.
Graduation
Vertical type, basic set
513-454E
0.01 mm
513-455E
0.002 mm
Vertical type, full set
513-454T
0.01 mm
513-455T
0.002 mm
Parallel type, basic set
513-284GE
0.01 mm
Parallel type, full set
513-284GT
0.01 mm
Price
Range
Accuracy
Scale
Measuring force
0.8 mm
0.2 mm
8 m
3 m
0-40-0
0-100-0
0.3 N or less
0.3 N or less
74.80
117.00
0.8 mm
0.2 mm
8 m
3 m
0-40-0
0-100-0
0.3 N or less
0.3 N or less
116.00
126.00
0.8 mm
8 m
0-40-0
0.3 N or less
80.60
0.8 mm
8 m
0-40-0
0.3 N or less
92.50
Range
Accuracy
Scale
Measuring force
.03"
.008"
.0005"
.0001"
0-15-0
0-4-0
0.3 N or less
0.3 N or less
86.40
102.00
.03"
.008"
.0005"
.0001"
0-15-0
0-4-0
0.3 N or less
0.3 N or less
92.50
126.00
.03"
.0005"
0-15-0
0.3 N or less
92.50
Inch
Basic set
Stylus,
2 mm
contact
point
(carbide)
Indicator
Code No.
Graduation
Vertical type, basic set
513-452
.0005"
513-453
.0001"
Vertical type, full set
513-452T
.0005"
513-453T
.0001"
Parallel type, full set
513-282GT
.0005"
Price
F
Knurled
clamp ring
Stem, 8 mm
DIMENSIONS
Unit: mm
Vertical Type
Parallel Type
Full set
40
20.9
21
40
17
Stem,
.157"
53
55.5
Stylus,
.118"
carbide
point
51.5
Stylus,
.039"
carbide
point
18
Set Configuration:
Inch
78.5
Swivel clamp
(900322, for
.157", 3/8",
dovetail)
Inch
holding bar
(L: 4")
Basic set
Knurled
clamp ring
8.3
Code No.
513-454E
513-455E
513-452
513-453
6.6
21.7
L
20.9
14.7
19.9
15
Indicator
Stem,
3/8".
Stylus, .079"
contact point
(carbide)
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
F-48
FEATURES
Metric
Code No.
513-514T
513-517T
513-517WT
513-503T
513-501T
4
4
4
4
4
4
4
Inch
Code No.
513-518T
513-512T
513-504T
Optional Accessories
Swivel clamps, holding bars, stems and styli (refer to pages
F-52 to F-54 for details)
513-517T
513-514T
513-517WT
513-501T
513-503T
513-518T
513-512T
F-49
513-504T
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
SPECIFICATIONS
Metric
Full set
Metric holding bar
(L: 100 mm)
Swivel clamp
(900321 for 4 mm,
8 mm, dovetail)
Code No.
513-514T
513-517T
513-517WT
513-503T
513-501T
Graduation
0.01 mm
0.01 mm
0.01 mm
0.002 mm
0.001 mm
Range
0.5 mm
0.8 mm
0.8 mm
0.2 mm
0.14 mm
Accuracy
10 m
8 m
8 m
3 m
3 m
Scale
0-25-0
0-40-0
0-40-0
0-100-0
0-70-0
Measuring force
0.3 N or less
0.3 N or less
0.3 N or less
0.3 N or less
0.4 N or less
Price
97.30
87.80
107.00
107.00
131.00
Graduation
.001"
.0005"
.0001"
Range
.04"
.02"
.01"
Accuracy
.001"
.0005"
.0002"
Scale
0-20-0
0-10-0
0-5-0
Measuring force
0.3 N or less
0.3 N or less
0.3 N or less
Price
86.50
97.30
101.00
Inch
Stem,
4 mm
8 mm
holding rod
(900211)
Code No.
513-518T
513-512T
513-504T
DIMENSIONS
Stylus, 2 mm
carbide point
Unit: mm
0.6
8 -0.03
Indicator
Stem,
8 mm
17
50
F
33
46
17
20.5
24
9.5 -0.03
Spanner (301336)
Full set
Swivel clamp
(900322 for
.157", 3/8",
dovetail)
L
36.8
20.9
14.7
12
20.9
9.5 -0.03
Code No.
513-514T
513-517T
513-503T
513-501T
513-517WT
30
Stylus,
.039"
carbide
point
Stem,
.157"
Stylus,
.118"
carbide
point
Spanner (301336)
Stem, 3/8"
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
F-50
Universal application to all directions. (Not only the direction of the contact point, but also the
direction of measurement itself can be adjusted 360 degrees without moving the indicator.)
Metric
Code No.
513-304GT
Inch
Code No.
513-302GT
Optional Accessories
102824:
Stylus, 1 mm ball contact (carbide)
4.20
102825:
Stylus, 2 mm ball contact (carbide)
7.20
102826:
Stylus, 3 mm ball contact (carbide)
4.20
Swivel clamps, holding bars, stems and styli (refer to pages
F-52 to F-54 for details)
DIMENSIONS
F
Unit: mm
513-304GT
513-304GT
SPECIFICATIONS
24
Metric
40
Graduation
0.01 mm
Range
0.8 mm
Accuracy
8 m
Scale
0-40-0
Measuring force
0.3N or less
Price
301.00
Graduation
.0005"
Range
.03"
Accuracy
.0005"
Scale
0-15-0
Measuring force
0.3N or less
Price
301.00
Inch
Code No.
513-302GT
Stylus, 1 mm
carbide point
Swivel clamp
(900321 for 4 mm
stem, 8 mm stem,
dovetail)
8 mm
stem
Stylus, 2 mm
carbide point
(102825)
Indicator
Inch holding
bar (L: 4")
Stylus, .118"
carbide point
Metric
holding bar
(L: 100 mm)
Stem,
4 mm
(900322 for
.157" stem,
3/8" stem,
dovetail)
Stylus, .039"
carbide point
Spare stylus, 2 mm
carbide point
Stylus,
3 mm
carbide point
19
26.6
Code No.
513-304GT
49
Indicator
Stylus, .079"
carbide point
(102825)
Knurled
clamp ring
3/8" stem
Knurled
clamp ring
Spanner
(102037)
Spanner
(102037)
F-51
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Optional Accessories
Styli for Metric Dial Test Indicators
Stylus length affects the scale factor of an indicator. The styli provided as standard give a scale factor of
unity.
L
0.5 mm ball-point
0.7 mm ball-point
1 mm ball-point (Carbide)
2 mm ball-point (Carbide)
2 mm ball-point (Ruby)
3 mm ball-point (Carbide)
SPECIFICATIONS
Metric
L
Code No.
0.5 mm ball-point
190547
14.7 mm
190549
20.9 mm
190654
22.3 mm
190656
44.5 mm
0.7 mm ball-point
190548
14.7 mm
190550
20.9 mm
190653
22.3 mm
190655
44.5 mm
1 mm ball-point (Carbide)
136756
12.1 mm
21CZA044
12.8 mm
103017
14.7 mm
103013
20.9 mm
137558
22.3 mm
137746
36.8 mm
136235
44.5 mm
2 mm ball-point (Carbide)
136104
12.1 mm
21CZA036
12.8 mm
103010
14.7 mm
103006
20.9 mm
137557
22.3 mm
129949
36.8 mm
136013
44.5 mm
2 mm ball-point (Ruby)
21CZA212
12.8 mm
21CZA209
14.7 mm
21CZA201
20.9 mm
21CZA210
22.3 mm
21CZA211
44.5 mm
3 mm ball-point (Carbide)
136758
12.8 mm
103018
14.7 mm
103014
20.9 mm
137559
22.3 mm
137747
36.8 mm
136236
44.5 mm
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
To fit models
Price
13.30
13.30
8.90
9.00
11.50
11.50
9.00
8.50
513-501T
513-401E
513-405E, 513-425E, 513-409, 513-455E, 513-503T
513-404E, 513-474E, 513-454E, 513-517T, 513-284GE
513-424E, 513-426E
513-414E, 513-514T
513-415E
2.70
5.80
4.20
4.20
4.20
4.20
2.80
513-501T
513-401E
513-405E, 513-425E, 513-409, 513-455E, 513-503T
513-404E, 513-474E, 513-454E, 513-517T, 513-284GE
513-424E, 513-426E
513-414E, 513-514T
513-415E
4.80
5.10
7.20
7.20
7.20
7.90
7.90
513-401E
513-405E, 513-425E, 513-409, 513-455E, 513-503T
513-404E, 513-474E, 513-454E, 513-517T, 513-284GE
513-424E, 513-426E
513-415E
10.50
10.50
15.90
10.50
10.50
513-401E
513-405E, 513-425E, 513-409, 513-455E, 513-503T
513-404E, 513-474E, 513-454E, 513-517T, 513-284GE
513-424E, 513-426E
513-414E, 513-514T
513-415E
2.70
4.20
4.20
4.20
4.20
2.80
F-52
Optional Accessories
Styli for Imperial Dial Test Indicators
Stylus length affects the scale factor of an indicator. The styli provided as standard give a scale factor of
unity.
L
.04" ball-point
.12" ball-point
SPECIFICATIONS
Inch
L
Code No.
.04" ball-point
136076
.59"
131314
.74"
133196
.78"
102824
.9"
103008
1.04"
136291
1.33"
131316
1.47"
.08" ball-point (Carbide)
136075
.59"
103011
.74"
133195
.78"
102825
.9"
103007
1.04"
136290
1.33"
131324
1.47"
.12" ball-point
136077
.59"
131315
.74"
133197
.78"
102826
.9"
103009
1.04"
136292
1.33"
131317
1.47"
To fit models
Price
513-403, 513-453
513-504T
513-402, 513-452, 513-282GT
513-302GT
513-518T
513-412
513-512T
2.70
4.80
4.20
4.20
4.20
2.80
4.20
513-403, 513-453
513-504T
513-402, 513-452, 513-282GT
513-302GT
513-518T
513-412
513-512T
4.80
7.20
7.20
7.20
4.20
4.80
4.20
513-403, 513-453
513-504T
513-402, 513-452, 513-282GT
513-302GT
513-518T
513-412
513-512T
2.70
4.80
4.20
4.20
4.20
2.80
4.20
F-53
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Swivel Clamps
Universal Holder
102037
Universal
holder
900321
Code No.
102037:
301336:
900321
900322
4.5
900322
Remarks
For 4 mm stem, 8 mm stem,
and dovetail
For .157" stem, 3/8" stem,
and dovetail
57
301336
15
6.4
Price
12.80
12.80
Code No.
901916
901459
901461
Holding Bars
Price
32.30
23.60
23.60
Stem
8 mm
.25"
6 mm
953638 (9 x 9 mm)
900209 (9 x 9 mm)
Universal holder
Stem
6 mm
.236"
Price
9.40
8.30
8.30
9.60
8.30
Length
50 mm
100 mm
115 mm
2"
4"
Code No.
901917
901546
901547
902805
58
902804
44
Centering Holder
902802
Price
32.30
23.60
23.60
Stem
8 mm
.25"
6 mm
Code No.
902802
902804
902805
Price
7.90
6.50
7.90
Diameter
4 mm / .157"
8 mm
3/8"
Centering
holder
102822
102081
Code No.
901959
901997
Code No.
102389
102822
102081
Diameter
4 mm / .157"
8 mm
3/8"
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Price
2.80
2.80
2.80
F-54
Stem
8 mm
.25"
Price
74.20
73.70
Instruments
SERIES 170 i-Checker
The i-Checker is specially designed to calibrate
all types of indicators and electronic gauges with
a stroke of up to 100 mm (4").
(0.2+L/100) m indication accuracy, where L =
indicator stroke (mm).
Directly inspects an indicator with a stroke of up
to 100 mm (4"). Dial test indicators, bore gauges
and lever-type inductive heads can be inspected
with optional accessories, such as the test
indicator attachment set (02ASK000).
Technical Data
Measuring range:
Resolution:
Accuracy:
Drive method:
Measuring unit:
Thermal expansion
coefficient:
Measurement method*:
Dimensions:
Operating temperature
range:
Power supply:
Mass:
100 mm/4"
0.02 m/0.8 in
(0.2+L/100) m in vertical position
(at 20C) (0.3+2L/100) m in
lateral position
L = arbitrary length (mm)
Electric motor
Reflective-type glass linear encoder
(81)x10-6/K
Automatic/semi-automatic
184 x 225 x 532 mm (W x D x H)
20C3C
100VAC to 240VAC 10%,
50/60 Hz
20 kg
* Consult your local Mitutoyo Sales Office for advice on your particular
application.
Functions
Code No.
170-321E
170-312E
Remarks
With 8 mm bush
With 3/8" bush
Price
7700.00
7700.00
Fully automatic inspection of digital indicator:
The Automatic Measurement
function, in tandem with
a digital indicator makes
the plunger move so that
measurement data is acquired
automatically. Therefore,
manual adjustment to the
measurement position is
unnecessary and the efficiency
of every inspection is enhanced.
F-55
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Unit: mm
180
532
02ASK000:
02ASK180:
02ASK370:
02ASK380:
902803:
902804:
02ASK040:
02ASJ856:
02ASK150:
02ASL150:
02ASK050:
02ASK060:
02ASK070:
02ASK080:
02ASK710:
02ASK090:
02ASK130:
02ASK730:
937179T:
DIMENSIONS
352
Optional Accessories
182
211
225
160
184
Dial indicator
Dial Test indicator*1
Hicator
Bore gauge*2
3
Digimatic indicator* Linear gauge
*1 Requires optional test indicator attachment set. Contact the nearest
Mitutoyo sales office for testable indicators.
*2 Requires optional bore gauge accessory.
*3 Requires optional SPC data cable for fully automatic measurement.
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
F-56
Instruments
SERIES 170 UDT-2 Dial Indicator Tester
UDT-2 is an accuracy tester for 0.01 mm resolution dial indicators, dial test indicators and bore gauges.
Accepts 6 mm and 8 mm stems.
Optional Accessory
12AAK824:
170-102-12
SPECIFICATIONS
Metric
Code No.
170-102-12
Range
0-25 mm
Graduation
0.001 mm
Accuracy
2 m
Price
1090.00
Range
0-1"
Graduation
.0001"
Accuracy
.0001"
Price
1090.00
Inch
Code No.
170-101-10
F-57
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
521-105
SPECIFICATIONS
Metric
Code No.
521-103
521-105
Range
0-1 mm
0-5 mm
Graduation
0.0002 mm
Accuracy
0.2 m
0.8 m
Price
3270.00
3470.00
Accuracy
.00001"
.00003"
Price
3270.00
3470.00
Inch
Code No.
521-104
521-106
Range
0-.05"
0-.2"
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Graduation
.00001"
F-58
Instruments
SERIES 547 ABSOLUTE Digimatic Thickness Gauges
Digimatic thickness gauges can quickly measure the thickness of thin products such as paper and felt.
Contact points and anvils of 547-300S and 547-320S are carbide or ceramic.
Integrated moulding of the bezel and crystal ensures protection against water and oil penetration via
the front face.
Tube thickness measurement type
Pipe wall thickness and the thickness of curved boards can be measured.
Lens thickness measurement type
Thickness of concave-convex lenses and surfaces can be measured.
Anvils and contact points are interchangeable to enable concave surfaces to be measured.
Provided with a ball point.
Groove depth measurement type
Suitable for measuring narrow grooves.
Measuring face of the contact point and anvil are blade-shaped (thickness: 1 mm).
Optional Accessories
905338:
905409:
02AZD790F:
264-504-5E:
Input Tool:
F
547-320S
547-300S
547-400S
547-361S
547-312S
547-316S
F-59
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
SPECIFICATIONS
Flat
point
Metric
Flat
point
SR2
Concave lens
Anvil
Convex lens
Anvil
Plano-convex lens
Flat
point
Flat
point
SR2
SR3
Concave lens
Price
Resolution
Accuracy
Measuring force
0.001 mm
3 m
3.5 N or less
Resolution
Accuracy
Measuring force
.00005"/0.001 mm
.0001"/3 m
3.5 N or less
500.00
.0005"/0.01 mm
.001"/20 m
1.5 N or less
310.00
.0005"/0.01 mm
.001"/20 m
1.5 N or less
269.00
.0005"/0.01 mm
.001"/20 m
1.5 N or less
310.00
.0005"/0.01 mm
.001"/20 m
1.5 N or less
320.00
.0005"/0.01 mm
.001"/20 m
1.5 N or less
290.00
500.00
Inch/Metric
SR3
Anvil
Code No.
Range
High accuracy, carbide plunger/anvil
547-401
0-12 mm
Anvil
Anvil
Convex lens
Anvil
Plano-convex lens
Code No.
Range
High accuracy, carbide plunger/anvil
547-400S
0-12 mm/0-.47"
Standard, ceramic plunger/anvil
547-300S
0-10 mm/0-.4"
Deep throat, ceramic plunger/anvil
547-320S
0-10 mm/0-.4"
Lens thickness
547-312S
0-10 mm/0-.4"
Groove depth
547-316S
0-10 mm/0-.4"
Tube thickness
547-361S
0-10 mm/0-.4"
Price
DIMENSIONS
Unit: mm
547-300S
547-320S
10
30
10
30
85
85
547-401
547-400S
10
120
10
120
175
175
Contact
point
6
4.8
4 ball point
(Standard accessory)
6.3
30
30
9.3
9.3
547-312S
Reversible
anvil (Travelling range 12 mm)
21
547-316S
SR2
30
6
4.8
30
547-361S
9.3
SR3
S3.5
Throat
depth
20
21
6 6
Contact point
3 Flat
30.3
(Throat depth)
85
SR3
Contact
point Reversible anvil 12 mm
85
Anvil
30.3
(Throat depth)
85
Anvil
85
5 5
30
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
F-60
6.5
85
Instruments
SERIES 7 Dial Thickness Gauges
Dial thickness gauges can quickly measure the thickness of thin products such as paper and felt.
Contact points and anvils of 547-300S and 547-320S are carbide or ceramic.
Integrated moulding of the bezel and crystal ensures protection against water and oil penetration via
the front face.
Tube thickness measurement type
Pipe wall thickness and the thickness of curved boards can be measured.
Lens thickness measurement type
Thickness of concave-convex lenses and surfaces can be measured.
Anvils and contact points are interchangeable to enable concave surfaces to be measured.
Provided with a ball point.
Groove depth measurement type
Suitable for measuring narrow grooves.
Measuring face of the contact point and anvil are blade-shaped (thickness: 1 mm).
7301
7321
7360
7326S
7313
7315
F-61
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
SPECIFICATIONS
Flat
point
Metric
Flat
point
SR2
SR3
Anvil
Concave lens
Anvil
Convex lens
Anvil
Plano-convex lens
Flat
point
Flat
point
SR2
SR3
Concave lens
Anvil
Anvil
Convex lens
Anvil
Plano-convex lens
Code No.
Range
Standard, ceramic plunger/anvil
7301
0-10 mm
7305
0-20 mm
Deep throat, ceramic plunger/anvil
7321
0-10 mm
7323
0-20 mm
Lens thickness
7313
0-10 mm
Groove depth
7315
0-10 mm
Tube thickness
7360
0-10 mm
Price
Graduation
Accuracy
Measuring force
0.01 mm
15 m
20 m
1.4 N or less
2.0 N or less
72.30
88.30
0.01 mm
15 m
22 m
1.4 N or less
2.0 N or less
87.00
101.00
0.01 mm
15 m
1.4 N or less
79.20
0.01 mm
15 m
1.4 N or less
98.00
0.01 mm
15 m
1.4 N or less
70.80
Graduation
Accuracy
Measuring force
.0001"
.0002"
1.4 N or less
117.00
.001"
.001"
.002"
1.4 N or less
2.0 N or less
76.00
88.30
.001"
.002"
2.0 N or less
101.00
.001"
.001"
1.4 N or less
98.00
.001"
.001"
1.4 N or less
98.00
Inch
Code No.
Range
Fine dial reading, ceramic plunger/anvil
7326S
0-.05"
Standard, ceramic plunger/anvil
7300S
0-.5"
7304S
0-1"
Deep throat, ceramic plunger/anvil
7322S
0-1"
Groove depth
7316S
0-.5"
Tube thickness
7361S
0-.5"
Price
DIMENSIONS
Unit: mm
7301, 7305
7321, 7323
10
30
10
30
85
85
10
10
120
120
175
7315
175
7313
Contact
point
Contact
point
30.3
(Throat depth)
85
7360
4 ball point
(Standard accessory)
Reversible
anvil (Travelling range 12 mm)
1
S3.5
Throat
depth
20
21
9.3
85
Anvil
SR2
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
30
6
4.8
SR3
85
F-62
30.3
(Throat depth)
85
30
3 Flat
5 5
SR3
30
Contact point
6.5
6
4.8
30
9.3
9.3
Anvil
6 6
Reversible anvil 12 mm
85
Instruments
SERIES 546 Contact Force Gauge
Contact Force Gauges are widely used to
determine the measuring force applied by an
instrument to a workpiece, as well as contact
forces of electrical relays, micro-switches, valves
and precision springs.
546-114
546-138
SPECIFICATIONS
Code No.
Standard type
546-113
546-114
546-118
Peak hold type
546-138
Graduation
Range
Accuracy
Price
5 mN
10 mN
0.1 N
10 mN-100 mN
30 mN-300 mN
0.3 N-3 N
0.5
(division)
102.00
97.70
90.00
0.1 N
0.3 N-3 N
0.5 (division)
150.00
DIMENSIONS
Unit: mm
39.5 (49.5)
Hole
1
0.8
47
Fulcrum
15
55
33.5 (43.5)
1.5
19
( ) : 546-113
F-63
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Versatile gauge with a choice of arm configurations suitable for measuring grooves and other hard-to measure features.
Optional Accessories
937387:
965013:
02AZD790E:
06ADV380E:
209-572
209-534
209-534
SPECIFICATIONS
Unit: mm
A
Inch/Metric
Measuring
force
Measuring contacts: Carbide ball 1.5 mm
209-572
0-20 mm
1.1/1.6 N
Measuring contacts: Carbide ball 5 mm
209-534
0-60 mm
0.9/1.2 N
Code No.
Range
Graduation
Accuracy
0.01 mm
0.03 mm
0.02 mm
0.06 mm
Figure 1
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
F-64
24.7 24.6
25
25
Type
Price
85
Fig. 1
671.00
190
Fig. 1
834.00
Instruments
SERIES 209 Coolant Proof Outside Dial Caliper Gauge
Versatile gauge with a choice of arm configurations suitable for measuring grooves and other hard-to measure features.
Figures 1/2/5
209-406
209-402
Unit: mm
Figures 3/4
A
209-405
L
Unit: mm
SPECIFICATIONS
Metric
Measuring
Graduation
force
Measuring contacts: Carbide bevel
209-405
0-20 mm
1.1/1.6 N
0.01 mm
Measuring contacts: Carbide ball 1.5/2 mm
209-402
0-10 mm
0.8/1.2 N
0.005 mm
209-404
0-20 mm
1.1/1.6 N
0.01 mm
209-911
0-50 mm
0.8/1.7 N
0.05 mm
209-407
0-20 mm
1.1/1.6 N
0.01 mm
Measuring contacts: Carbide ball/bevel
209-406
0-20 mm
1.1/1.6 N
0.01 mm
Measuring contacts: Carbide ball 2 mm
209-843
0-10 mm
0.3/1.3 N
0.1 mm
Code No.
Range
Accuracy
0.03 mm
Contact radii
Type
Price
24.7 24.6 81
0.4/0.4 mm
Fig. 1
433.00
24.7
Fig. 4
470.00
470.00
618.00
433.00
Fig. 2
80
0.4/0.75 mm
Fig. 3
433.00
0.1 mm
35
2/2 mm
Fig. 5
123.00
Accuracy
Contact radii
Type
Price
Fig. 1
561.00
Fig. 3
514.00
530.00
514.00
Figure 1
Figure 2
Figure 3
Figure 4
Inch
Measuring
Graduation
force
Measuring contacts: Carbide bevel
209-454
0-.8"
1.1/1.6 N
.0005"
Measuring contacts: Carbide ball .059"
209-456
0-.8"
1.1/1.6 N
.0005"
209-450
0-.4"
1.2/1.6 N
.0002"
209-455
0-.8"
1.1/1.6 N
.0005"
Measuring contacts: Carbide ball .118"
209-916
0-2"
0.8/1.7 N
.001"
209-917
Code No.
Range
.0015"
24.7 24.6 81
.02/.02"
.0015"
.0008"
.0015"
24.7 84
8.9 19 35
24.7 24.6 81
.06/.06"
30
.118/.118"
.002"
30
167
169
Fig. 2
Fig. 2
Fig. 4
618.00
618.00
Figure 5
F-65
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Optional Accessories
937387:
965013:
02AZD790E:
06ADV380E:
209-551
209-558
SPECIFICATIONS
Unit: mm
L
Inch/Metric
Measuring
force
Measuring contacts: Carbide ball 0.6 mm
209-551
5-15 mm
0.8/1.2 N
Measuring contacts: Carbide ball 1 mm
209-552
10-30 mm
1.1/1.6 N
209-904
13-43 mm
1.2/1.7 N
209-556
50-70 mm
1.1/1.6 N
209-558
70-90 mm
Code No.
Range
Figure 1
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Graduation
Accuracy
Type
Price
0.005 mm
0.015 mm
2.3
0.8
35
Fig. 3
620.00
0.01 mm
0.02 mm
0.03 mm
0.04 mm
5.2
5.9
1.2
5.9
85
127
Fig. 3
Fig. 1
0.01 mm
0.03 mm
8.3
1.2
85
Fig. 2
545.00
561.00
545.00
545.00
Figure 2
Figure 3
F-66
Instruments
SERIES 209 Coolant Proof Inside Dial Caliper Gauge
Versatile gauge for measuring internal groove diameter.
209-300
209-305
Unit: mm
L
A
SPECIFICATIONS
Metric
Measuring
force
Measuring contacts: Carbide bevel
209-300
2.5-12.5 mm
0.8/1.2 N
Measuring contacts: Carbide ball 0.6 mm
209-301
5-15 mm
0.8/1.2 N
Measuring contacts: Carbide ball 1 mm
209-302
10-30 mm
209-303
20-40 mm
209-304
30-50 mm
209-305
40-60 mm
1.1/1.6 N
209-306
50-70 mm
209-307
60-80 mm
209-308
70-90 mm
209-309
80-100 mm
Code No.
Range
Graduation
Accuracy
Type
Price
B
0.005 mm
0.015 mm
0.7
0.4
12
Fig. 1
470.00
0.005 mm
0.015 mm
2.3
0.8
35
Fig. 4
403.00
5.2
Fig. 4
Fig. 2
530.00
530.00
530.00
530.00
460.00
460.00
531.00
563.00
0.01 mm
0.03 mm
1.2
85
8.3
Fig. 3
Inch
Measuring
force
Measuring contacts: Carbide bevel
209-350
.1-.5"
0.8/1.2 N
209-351
.2-.6"
Measuring contacts: Carbide ball .0394"
209-352
.4-1.2"
1.1/1.6 N
209-354
.8-1.6"
209-356
1.6-2.4"
Code No.
Range
Graduation
Accuracy
Type
Price
.0002"
.0008"
0.9
4.6
0.5
0.8
35
Fig. 1
514.00
514.00
.0005"
.0015"
5.3
7.4
12.2
1.8
3.3
1.8
84
Fig. 1
Fig. 2
Fig. 3
514.00
433.00
514.00
F-67
Figure 1
Figure 2
Figure 3
Figure 4
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
209-106
F
209-117
SPECIFICATIONS
Metric
Code No.
209-106
209-107
209-108
Range
10-35 mm
30-55 mm
50-75 mm
Graduation
Accuracy
0.025 mm
0.04 mm
Range
.4-1.4"
1.2-2.2"
2-3"
Graduation
Accuracy
.001"
.02"
Price
150.00
182.00
217.00
Inch
Code No.
209-116
209-117
209-118
Price
150.00
182.00
217.00
DIMENSIONS
Unit: mm
80
C
51
B
2.3
Code No.
209-106
209-107
209-108
A
2.3
14.5
9.8
B
2.3
4.3
7.6
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
C
4.8
17
11.5
D
4.8
6.8
10
F-68
Instruments
SERIES 201 Dial Snap Gauges
Designed for quick GO/NG judgement of
diameters of cylinders and shafts in machining
processes.
Wide (13.5 x 12 mm/1.53 x 47"), flat carbide
anvils.
Anvil retracting stroke: 2 mm/.080"
Anvil positioning range: 25 mm/1"
Adjustment nut: adjusts the measuring range.
Clamp: adjustment nut.
Optional Accessories
21DZA000:
2046SB:
2109SB-10:
2803SB-10:
201-101
SPECIFICATIONS
DIMENSIONS
Metric
Parallelism
Range
0-1"
1-2"
2-3"
3-4"
4-5"
5-6"
6-7"
7-8"
8-9"
9-10"
10-11"
11-12"
Parallelism
5 m
15N3N
Price
286.00
295.00
309.00
318.00
332.00
346.00
364.00
378.00
398.00
417.00
427.00
445.00
Adjustment
nut
(44)
40
Unit: mm
Anvil
40
(44.6)
(12)
Range
0-25 mm
25-50 mm
50-75 mm
75-100 mm
100-125 mm
125-150 mm
150-175 mm
175-200 mm
200-225 mm
225-250 mm
250-275 mm
275-300 mm
16
Code No.
201-101
201-102
201-103
201-104
201-105
201-106
201-107
201-108
201-109
201-110
201-111
201-112
Clamp
Work Stopper
Dial indicator
protection arm
Heat shield
Inch
Code No.
201-151
201-152
201-153
201-154
201-155
201-156
201-157
201-158
201-159
201-160
201-161
201-162
.0002"
15N3N
F-69
Price
286.00
295.00
309.00
318.00
332.00
346.00
364.00
378.00
398.00
417.00
427.00
445.00
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Stands
SERIES 7 Dial Gauge Stands
Optional Accessories
101461:
101462:
101463:
101461
10
25
32
14
SR20
101462
14
14
32
SR20
58
10
25
58
58
58
58
32
SR20
58
11
26
101463
7001-10
7002-10
7007-10
SPECIFICATIONS
Metric
Code No.
7001-10
7002-10
7007-10
Price
389.00
364.00
399.00
Remarks
With 58 mm serrated anvil
With 58 mm flat anvil
With 90 mm square anvil
8 mm, 9.53 mm
Note: Perpendicularity of the mounting hole to the anvil: less than 0.4 mm/100 mm.
Consult us when mounting Mitutoyo's Linear Gauge on this stand. We will check the operation of the stand and Linear gauge before
shipment (made-to-order).
DIMENSIONS
Unit: mm
7001-10, 7002-10
Column travel: 0-95 mm
30
80
Column clamp
Fine adjustment
205
160
50
Stem hole
with Bush: 8
without Bush: 9.53
Indicator clamp
Anvil
Flatness: 1.3 m
45
58
168
7007-10
Column travel: 0-90 mm
80
Column clamp
Fine adjustment
Stem hole
with Bush: 8
without Bush: 9.53
205
160
50
30
110
Anvil
Flatness: 1.3 m
Indicator clamp
45
90
168
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
110
F-70
Stands
SERIES 7 Magnetic Stands
Mitutoyos Magnetic Stands accept all dial indicators and dial test indicators (with stem 6 mm or
8 mm) and clamp to iron or steel surfaces with a strong magnetic force.
DIMENSIONS
Unit: mm
7011SN
7010SN
F
7014
7012-10
7010SN
7012-10
7014
7033B
7033B
7011SN
SPECIFICATIONS
Code No.
7010SN
7011SN
7012-10
7014
7033B
Description
Dovetail groove
Magnetic stand
4 mm, 8 mm,
9.53 mm (3/8")
F-71
Provided
Provided
Provided
Remarks
Price
58.50
61.30
125.00
53.50
143.00
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
8 mm bush*
20.20
9.53 mm (3/8") bush*
20.20
15 mm bush*
10.90
215-405-10
215-505-10
SPECIFICATIONS
215-405-10
215-505-10
150 x 150 mm
Code No.
Column travel
235 mm
275 mm
Acceptable stem
sizes
8 mm, 9.53 mm
8 mm, 9.53 mm,
20 mm
Remarks
With fine adjustment of 1 mm range
With fine adjustment over the
entire travel
Price
500.00
656.00
Note: Perpendicularity of the mounting hole to the anvil: less than 0.4 mm/100 mm
DIMENSIONS
Unit: mm
40
95
Fine adjustment
Column clamp
320
60
Stem hole
without Bush 9.53
with Bush 8
Indicator clamp
Anvil
Flatness: 2.3 m
54
215-405-10
Column travel: 0-235 mm
134
201
115
Column clamp
Stem hole
without Bush 20
with Bush 9.53
with Bush 8
Anvil
Flatness: 2.3 m
400
100
50
Indicator clamp
64
215-505-10
Column travel: 0-275 mm
255
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
179
F-72
Stands
SERIES 519 Transfer Stand
Transfer Stands are designed for comparison measurements of size using a dial indicator or Digimatic
Indicator.
Optional Accessories
101461:
101462:
101463:
14
14
101461
58
58
14
101462
58
14
14
32
58
58
SR20
11
26
101463
58
519-109-10
(with a serrated anvil)
SPECIFICATIONS
Metric
Code No.
519-109-10
Remarks
With serrated anvil
Price
512.00
Note: Perpendicularity of the mounting hole to the anvil: less than 0.4 mm/100 mm.
DIMENSIONS
Unit: mm
80
Stem hole
without Bush 9.53
with Bush 8
430
385
50
30
45
58
Anvil
Flatness: 1.3 m
F-73
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Bottom-surface flatness
V-surface flatness
Parallelism between the
bottom-surface and the
cylinder on the V-surface
Inclination of the V-anvil
against the bottom-surface
Parallelism between the side
surface and the cylinder on
the V-surface
Difference in the height of a
pair of V-blocks
Reference
JIS B 7540
Grade 1,
100 mm or less
2 m
or less
7.5 m
or less
10 m or less
10 m
or less
7.5 m
or less
20 m or less
9 m
or less
10 m or less
181-902-10
SPECIFICATIONS
Metric
Code No.
181-902-10
Remarks
With clamp
Price
124.00
Remarks
With clamp
Price
124.00
Inch
Code No.
181-901-10
DIMENSIONS
Unit: mm
20.
31.8
13.
5
31.
8
41
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Application example.
F-74
Nomenclature
Cap
Bezel clamp
Limit hand
Pointer
Bezel
Revolution counting device
Stem
Dial Faces
0.01 mm
Continuous dial
(Bi-directional graduation)
0.001 mm
Continuous dial
(Standard scale spacing)
Continuous dial:
For direct reading
Balanced dial:
For reading the difference from a reference surface
Reverse reading dial: For depth or bore gauge measurement
One revolution dial: For error-free reading of small differences
F-75
Dial Indicator Standard B7503 : 2011 (Extract from JIS/Japanese Industrial Standards)
Item
Indication error
Retrace error
Calibration method
Hold the dial indicator with its plunger set vertically downward,
retract the plunger (retraction direction) to set the dial hand at
the zero point, and determine the indication error at the belowmentioned measurement points with reference to the dial
graduations.
- Every 1/10 revolution for the first two revolutions
- Every half revolution for the next five revolutions
- Every revolution for the next 25 revolutions
- Every 5 revolutions for after the 25th revolution
For one revolution type dial indicators and indicators whose
graduations are not factors of 10, determine the indication
errors at the closest measurement points mentioned above.
Next, retract the plunger more than three graduations over
the entire measuring range, reverse the plunger displacement
(extension direction), and determine the indication errors at
the same points measured during plunger retraction. Then
determine the indication errors and the retrace errors with
reference to the bidirectional indication errors thus obtained.
When automatically reading errors by automatic inspection
machine, determine the gap between the dial hand and the
graduation mark with reference to the displacement of the
measuring instrument.
Dial indicator
Supporting stand
Micrometer head or other
length measuring unit
F
Dial indicator
Repeatability
Measuring stage
Supporting stand
Supporting stand
Measuring stage
Dial indicator
Measuring
Force
Supporting stand
Unit: m
Supporting stand
Top pan type spring scale (graduation: 0.02 N or
less) or force gauge (sensitivity: 0.02 N or less)
Indication error
Repeatability
Arbitrary 1/10
revolution
Arbitrary 1/2
revolution
Arbitrary One
revolution
Entire
measuring
range
0.5
0.5
10
10
12
3.5
2.5
2.5
10
12
12
17
3.5
11
11
12
12
4.5
10
10
15
15
15
20
10
12
12
14
14
10
4.5
10
12
15
25
30
40
50
12
10
15
16
18
20
12
MPE for one revolution type dial indicators does not define the indication error of arbitrary 1/2 and 1 revolution.
Notes: (1) Values in the table above apply at 20C, which JIS B0680 defines as the standard temperature.
(2) The measurement characteristics of a dial indicator have to meet both maximum permissible error (MPE) and measurement force permissible limits (MPL) at any position within
the measuring range in any posture when the measurement characteristics are not specified by the manufacturer.
F-76
Method
rm
mo
8m
Stem
mounting
Note
ore
Method
Lug mounting
Note
Contact Element
plunger
5
M2.5 x 0.45
Incomplete thread section
shall be less than 0.7 mm
Remarks
2
3
1 0 9
8
7
4 5 6
4 5 6
2
3
1 0 9
8
7
Ground
Plunger horizontal
(lateral position)
Ground
4 5 6
2
3
1 0 9
8
7
Contact element up
(upside-down position)
Ground
0.2 mm
0.2 mm
Lugs can be changed 90 degrees in orientation according to the application. (The lug is set horizontally when shipped.)
Lugs of some Series 1 models (No. 1911,1913-10 & 1003), however, cannot be altered to horizontal.
To avoid cosine-effect error, ensure that any type of gauge or indicator is mounted with its plunger in line with the intended measurement direction.
F-77
Dial Test Indicator Standard B7533-1990 (Extract from JIS/Japanese Industrial Standards)
No.
1
Item
Calibration method
(1) For an indicator of 0.01 mm graduation: Displace the contact point so as to move the pointer
clockwise in increments of 0.1 mm with reference to the graduations from the zero point to
the end point of the measuring range while taking readings of the calibration tool at each
point and determine this accuracy from the error curve drawn by plotting the differences of
each "indicator reading - calibration tool reading".
(2) For an indicator of 0.002 mm graduation: Displace the contact point so as to move the pointer
clockwise in increment of 0.02 mm with reference to the graduations from the zero point to
the end point of the measuring range while taking readings of the calibration tool at each
point and determine this accuracy from the error curve drawn by plotting the differences of
each "indicator reading - calibration tool reading". The instrumental error of the calibration
tool shall be compensated prior to this measurement.
Wide-range
accuracy
2 Adjacent error
Micrometer head or
length measuring unit
After the completion of the wide-range accuracy measurement, reverse the contact point from
the last point of measurement while taking readings at the same scale graduations as for the
wide-range accuracy measurement and determine the retrace error from the error curve plotted.
3 Retrace error
Holding the dial test indicator with its stylus parallel with the top face of the measuring stage,
displace the contact point quickly and slowly five times at a desired position within the measuring
range and determine the maximum difference in indication.
Measuring stage
Supporting stand
Measuring stage,
Supporting stand, and
Gauge block of grade 1
as stipulated by JIS B7506
(Gauge block)
4 Repeatability
b
Holding the stylus parallel to a gauge block placed on the measuring stage, move the gauge block
to and fro and left to right under the contact point within the measuring range and determine the
maximum difference in indication.
Gauge block
5 Measuring force
Measuring stage
Holding an indicator by the case or stem, displace the contact point gradually and continuously
in the forward and backward directions respectively and take a reading of measuring force at the
zero, middle and end points of the measuring range in each direction.
Performance
The maximum measuring force in the forward direction shall not exceed 0.5 N. The difference
between the maximum and minimum measuring forces in one direction shall not exceed 0.2 N
(20 gf). Note that the smallest possible measuring force is desirable for indicators.
Notes: There are no JIS standards applicable to models with a graduation of 0.001 mm. Therefore, referring to JIS B 7533-1990 for inspecting the wide-range accuracy and adjacent error, the accuracy is measured
by moving the contact point 0.01 mm clockwise from the start point of the measuring range to the end point with reference to the graduations.
Accuracy of indication
Permissible indication errors of dial test indicators are as per the table below.
Graduation (mm)
0.01
0.002
Adjacent error
Repeatability
Retrace error
3
4*1
2
The reading of any indicator will not represent an accurate measurement if its
measuring direction is misaligned with the intended direction of measurement
(cosine effect). Because the measuring direction of a dial test indicator is at right
angles to a line drawn through the contact point and the stylus pivot, this effect
can be minimized by setting the stylus to minimize angle (as shown in the
figures). If necessary, the dial reading can be compensated for the actual value by
using the table below to give the true value of a measurement.
True value = indicated value x compensation factor
Compensating for a non-zero angle
Angle
10
20
30
40
50
60
Compensation factor
0.98
0.94
0.86
0.76
0.64
0.50
Examples
If a 0.200 mm measurement is indicated on the dial at
various values of , the true values are:
For = 10, 0.200 mm x .98 = 0.196 mm
For = 20, 0.200 mm x .94 = 0.188 mm
For = 30, 0.200 mm x .86 = 0.172 mm
Note: A special contact point of involute form can be used to apply compensation automatically and allow
measurement to be performed without manual compensation for any angle from 0 to 30. (This type of
contact point is custom-made.)
F-78