Beruflich Dokumente
Kultur Dokumente
Fire
Protection
Products
Fivalco Inc
Limited Warranty
Applicable to
Fivalco,Inc.Valves
FivaIco Inc.warrants each metaI valve to be free from defects in material and
workmanship under normal use and service for a period of one year from the date
of purchase.
In the event that any defect is discovered which may be covered by this warranty,
the owner should contact FivaIco Inc.in writing or by E-mail to this address.
The owner may be instructed to return the vaIve at owner's expense to Fivalco
Inc.or an authorized FivaIco location for inspection.In the case that the inspection
reveals that the valve is defective it will be replaced at Fivalco Inc.'s expense.
Replacements shall be shipped free of charge to the owners provided that the
valve was installed in accordance with Fivalco lnc.instructions and in accordance
with the local authority having jurisdiction.
To the extent permitted by law this warranty specificaIIy excludes incidental and
consequential damages of every type and description resulting from any claimed
defect in materiaI or workmanship,incIuding,but not limited to, personal injuries
and property damages.To the extent permitted by law implied warranties of
merchantability and fitness for particuIar purposes are limited in duration.
Some states or countries do not alIow excIusions or limitation of incidental damages
so these limitations may not apply to you.
This warranty provides the owner with specific Iegal rights and owner may have
other rights,which vary from state to state.
.......................................................................................................................................................................................................................................
Distributed by:
FIVALCO, INC.
Product lndex
Approved and Listed Valves
Fireriser Valves
Gate VaIves
GV-OSY-RW-1161-200PSI OS& Y Gate Valve-Flanged ................................................................................... 4
GV-OSY-RW-1161-250PSI OS&Y Gate Valve-Flanged .................................................................................... 5
GVNR-RW-1161-200PSI Non Rising Stem Gate Valve-Flanged ...................................................................... 6
PIV 888 Post lndicator ....................................................................................................................................... 7
Check VaIves
DDCV-1161- U . UL Wafer Check 175PSI ....................................................................................................... 8
Butterfly Valves
Fireriser HPW Wafer Butterfly Valve 300PSI ................................................................................................... 9
Fireriser HPG Grooved Butterfly Valve 300PSI ............................................................................................. 10
Fireriser DW Grooved Butterfly Valve 175PSI ............................................................................................... 11
Fireriser DG Wafer Butterfly Valve 175PSl .................................................................................................... 12
Firefly BG Grooved Bronze Butterfly Valve 175PSl ....................................................................................... 13
Firefly BT Threaded Bronze Butterfly Valve 175PSI ...................................................................................... 14
Design,Care and Maintenance........................................................................................................................ 15
Fivalco
Fireriser RESILIENT SEATED GATE VALVES
Outside Screw and Yoke-Rising StemFlanged Ends
FIG No:
GVOS-RW-1161
200PSI
Materials List
PART NAME
Body
Wedge Disc
Stem Nut
O-Ring
Stem
O-Ring(Cover)
Bonnet
Packing
Packing Gland
MATERIAL
Cast Iron: ASTM A126 CL.B
Cast Iron: ASTM A126B EPDM Coated
Bronze: ASTM B62 C83600
NBR/EPDM
Brass: ASTM B16 C3600/SS: AISI 420
NBR/EPDM
Cast Iron: ASTM A126 CL.B
Sq.Braided Non-Asbestos
Cast Iron: ASTM A126 CL.B
Yoke Nut
Washer
Handwheel
Lock Nut
2-1/2"
190.5 7-1/2
422.0 16-5/8
359.0 14-1/8
184.0 7-3/4
178.0 7.0
3"
203.0
482.5
406.5
254.0
190.5
8.0
19.0
16.0
10.0
7-1/2
4"
229.0 9.0
568.0 22-3/8
467.0 18-3/8
254.0 10.0
228.6 9.0
Performance Information
1. Design and dimensions conform to AWWA C509.
2. Flanged to ANSI B16.1, 125#. Other flange types available.
3. Fusion bonded epoxy coated inside and out.
4. Valve is rated at 200 PSI for Fire Protection Service.
-4-
6"
267.0
765.0
613.0
305.0
279.4
8"
10-1/2 292.0
30-1/8 945.0
24-1/8 743.0
12.0
355.5
11.0
343.0
11-1/2
37-1/4
29-1/4
14.0
13-1/2
10"
330.0 13.0
1175.0 46-1/4
921.0 36-1/4
444.5 17-1/2
406.4 16.0
Fivalco
Fireriser RESILIENT SEATED GATE VALVES
Outside Screw and Yoke-Rising StemFlanged Ends
FIG No:
GVOS-RW-1161
250PSI
Materials List
PART NAME
Body
Wedge Disc
Stem Nut
O-Ring
Stem
O-Ring (Cover)
Bonnet
Packing
Packing Gland
Yoke Nut
Washer
Handwheel
Lock Nut
MATERIAL
Ductile Iron : ASTM A536 65-45-12
ASTM A536 65-45-12 EPDM Coated
Bronze: ASTM B62 C83600
NBR / EPDM
Brass: ASTM B16 C3600 / SS: AISI 420
NBR / EPDM
Ductile Iron: ASTM A536 65-45-12
Sq. Braided Non-Asbestos
Ductile Iron: ASTM A536 65-45-12
Bronze: ASTM B62 C83600
PTFE
Ductile Iron: ASTM A536 65-45-12
Bronze: ASTM B62 C836000
4"
229.0
568.0
467.0
254.0
228.6
6"
9.0
22-3/8
18-3/8
10.0
9.0
267.0
765.0
613.0
305.0
279.4
8"
10-1/2
30-1/8
24-1/8
12.0
11.0
292.0
945.0
743.0
355.5
343.0
11-1/2
37-1/4
29-1/4
14.0
13-1/2
Performance Information
1. Design and dimensions conform to AWWA C509.
2. Flanged to ANSI B16.1, 125#. Other flange types available.
3. Fusion bonded epoxy coated inside and out.
4. Valve is rated at 250 PSI for Fire Protection Service.
Fivalco
Fireriser RESILIENT SEATED GATE VALVES
Non Rising Stem-Flanged Ends
FIG No:
GVNR-RW-1161
200PSI
Materials List
PART NAME
Body
Wedge Disc
Stem Nut
O-Ring
Stem
Bonnet
Thrust Washer
Post Plate
Operating Nut
MATERIAL
Cast Iron: ASTM A126 CL.B
CI ASTM A126 CL. B EPDM Coated
Bronze: ASTM B62 C83600
NBR / EPDM
Brass ASTM B16 C3600 / SS:AISI 420
Cast Iron: ASTM A126 CL.B
PTFE
Cast Iron: ASTM A126 CL. B
Cast Steel: ASTM A216 WCB
General Dimensions-mm/in
Valve Size
A
B
C
D
2-1/2"
190.5 7-1/2
422.0 16-5/8
305.0 12.0
178.0 7.0
3"
203.0 8.0
482.5 19.0
305.0 12.0
190.5 7-1/2
4"
229.0 9.0
448.0 17-5/8
305.0 12.0
228.6 9.0
6"
267.0
523.0
305.0
279.4
Performance Information
1. Design and dimensions conform to AWWA C509.
2. Flanged to ANSI B16.1, 125#. Other flange types available.
3. Fusion bonded epoxy coated inside and out.
4. Valve is rated at 200 PSI for Fire Protection Service.
-6-
10-1/2
20-5/8
12.0
11.0
292.0
628.0
305.0
343.0
8"
11-1/2
24-3/4
12.0
13-1/2
10"
330.0 13.0
706.0 27-3/4
305.0 12.0
406.4 16.0
Fivalco
Fireriser Indicator Post
Materials List
DET QTY.
DESCIPTION
1
1
Locking Wrench
2
1
Operating Nut
3
1
O-Ring
4
1
Top Section
5
1
Window Glass
6
2
Open Target
7
2
Shut Target
1
Target Carrier Nut
2
Target Carrier Plate
8
4
Clamp Target Retainer
8
Pan Head
4
Hex Nut
9
1
1/2" NPT Pipe Plug
10
1
3/8" Eyebolt
11
1
Hex Capscrew
12
1
1"Sq. Stem
13
1
Coupling
14
1
Cotter Pin
15
2
3/4" Hex Hd. Screw
16
1
Telescoping Barrel
17
1
Lower Standpipe
18
2
3/4" Hex Hd. Screw
19
1
Base Flange
20
4
5/8" Hex Capscrew
21
4
5/8" Hex Nut
MATERIAL
CI. A126-B
Bronze B584
Buna N
CI. A126-B
Commercial
Cast Aluminum
Cast Aluminum
Bronze B584
1/16" Sheet Metal
302 S.S.
Zinc Plated Steel
Zinc Plated Steel
Mall. Iron
Forged Steel
Zinc Plated Steel
AISI 1020
CI. A126-B
Brass
Zinc Plated Steel
CI. A126-B
4" DI. CI 52ANSI A21.51
Zinc Plated Steel
CI. A126-B
Zinc Plated Steel
Zinc Plated Steel
Field Adjustment
1. Remove the top section from the top of the Indicator Post assembly.
2. Cut the required length off the bottom of the Standpipe for the Ground Line to match up with
Standpipe Ground Line mark.
3. Set the "OPEN" and "SHUT" targets for the appropriate valve size.
4. Reattach the Top Section to the top of the Indicator Post assembly.
Fivalco
DOUBLE DOOR CHECK VALVE,WAFER TYPE
For Fire Protection Service
Fig No:
DDCV-1161-U
175PSI
Materials List
PART NO:
1
2
3
4
5
6
7
8
9
10
PART NAME
Body
Disc
Spring
Hinge Pin
Stop Pin
Spacer
Pin Retainer
Gasket
Washer
Lifting Hook
MATERIAL
Cast lron ASTM A126 CL. B MoIded-in EPDM Seat
Stainless Steel AlSl 304
Stainless Steel AISl 304
Stainless SteeI AISl 416
Stainless Steel AISl 416
PTFE
Stainless SteeI AISI 416
PTFE
PTFE
Carbon SteeI(Not Shown,only for 8",10"&12")
GeneraI Dimensions-mm/in
Size
4"
6"
8"
A
93.0 3.66
105.0 4.13
121.0 4.76
B
D
172.0 6.77 136.0 5.35
220.0 8.66 178.0 7.00
280.0 11.20 230.0 9.06
Performance lnformation
1.Working Pressure 175PSl
2.Stainless steel disc for exceIIent corrosion resistance.
-8-
Size
10"
12"
A
164.0 6.06
187.0 7.36
B
D
340.0 13.39 285.0 11.22
410.0 16.14 338.0 13.31
Fivalco
Fireriser Butterfly Valves
Wafer Type UL /ULc Listed FM Approved
Fig No:
Fireriser HPW
300PSI
Materials List
PART NAME
MATERIAL
Body
Ductile lron ASTM A536 EPDM Encapsulated
Disc
Ductile lron ASTM A536 Nylon Coated
Stems
Stainless Steel AISl 420
Worm Gear Shaft
Stainless Steel AISl 420
Gear Housing
Ductile lron ASTM A536 65-45-12
Hand Wheel
Ductile lron ASTM A536 65-45-12
Flag lndicator
Ductile lron ASTM A536 65-45-12
Segment Gear
Bronze ASTM B-148/ASTM B584
Gaskets and "O" rings
EPDM Grade"E"
General Dimensions-mm/in
Size
2-1/2"
3"
4"
6"
8"
A
5.35
5.63
6.14
7.40
8.74
136
143
156
188
222
B
3.43
3.66
4.29
5.67
6.54
87
93
109
144
166
C
1.81 46
1.81 46
2.05 52
2.20 56
2.28 58
D
5.88 149.4
6.62 168.2
7.88 200.2
10.6 269.8
13.0 330.2
E
6.54
6.81
7.32
8.58
9.92
166
173
186
218
252
F
5.31
5.31
5.31
8.66
8.66
135
135
135
193
193
G
5.04
5.04
5.04
8.66
8.66
128
128
128
220
220
H
0.32
0.57
0.89
1.79
2.72
8.2
14.5
22.7
45.4
69.1
Fivalco
Fireriser Butterfly VaIves
Grooved Ends UL/ULc Listed FM Approved
Fig No:
Fireriser HPG
300PSI
MateriaIs List
PART NAME
MATERIAL
Body
Ductile ASTM A536 Nylon Coated
Disc
Ductile lron ASTM A536 EPDM Encapsulated
Stems
Stainless Steel AISl 420
Worm Gear Shaft
Stainless Steel AISl 420
Gear Housing
Ductile lron ASTM A 536 65-45-12
Hand Wheel
Ductile lron ASTM A 536 65-45-12
Flag lndicator
Ductile lron ASTM A 536 65-45-12
Segment Gear
Bronze ASTM B-148/ASTM B584
Gaskets and "O" rings
EPDM Grade"E"
A
4.13
4.41
5.71
7.05
8.03
105
112
145
179
204
-10-
B
3.30 85
3.60 92
4.30 108
5.71 145
6.70 170
C
3.80 96.4
3.80 96.4
4.54 115.4
5.21 132.4
5.80 147.4
D
2.87
3.50
4.50
6.63
8.63
E
73.0 5.31
88.9 5.59
114.3 6.89
168.3 8.23
219.1 9.21
135
142
175
209
234
F
5.04
5.04
5.04
8.66
8.66
G
128
128
128
220
220
5.04
5.04
5.04
8.66
8.66
H
128
128
128
220
220
0.27
0.95
6.8
24.2
Fivalco
Fireriser Butterfly VaIves
Wafer Type UL/ULc Listed FM Approved
Fig No:
Fireriser DW
175PSI
MateriaIs List
PART NAME
MATERIAL
Body
Ductile lron ASTM A536 EPDM Encapsulated
Disc
Ductile lron ASTM A536 Nylon Coated
Stems
Stainless Steel AISl 420
Worm Gear Shaft
Stainless Steel AISl 420
Gear Housing
Ductile lron ASTM A536 65-45-12
Hand Wheel
Ductile lron ASTM A536 65-45-12
Flag lndicator
Ductile lron ASTM A536 65-45-12
Segment Gear
Bronze ASTM B-148/ASTM B584
Gaskets and "O" rings
EPDM Grade"E"
General Dimensions-mm/in
Size
21/2"
3"
4"
6"
8"
A
4.1
4.4
5.7
7.1
8.0
B
105
112
145
180
204
3.3
3.6
4.3
5.7
6.7
C
85
92
108
145
170
1.8
1.8
2.0
2.2
2.4
D
46
46
52
56
60
3.6
4.2
5.0
7.1
9.2
E
92
107
128
181
234
5.3
5.6
6.9
8.3
9.1
F
135
142
175
210
232
5.3
5.3
5.3
7.6
7.6
G
135
135
135
193
193
4.9
4.9
4.9
8.9
8.9
H
125
125
125
225
225
0.4
0.6
1.0
1.8
2.7
9.5
16.0
25.0
45.3
68.5
Fivalco
Fig No:
Fireriser Butterfly Valves
Fireriser DG
Grooved Ends UL/ULc Listed FM Approved
175PSI
MateriaIs List
PART NAME
MATERIAL
Body
Ductile ASTM A536 Nylon Coated
Disc
Ductile lron ASTM A536 EPDM Encapsulated
Stems
Stainless Steel AISl 420
Worm Gear Shaft
Stainless Steel AISl 420
Gear Housing
Ductile lron ASTM A 536 65-45-12
Hand Wheel
Ductile lron ASTM A 536 65-45-12
Flag lndicator
Ductile lron ASTM A 536 65-45-12
Segment Gear
Bronze ASTM B-148 or ASTM B584
Gaskets and "O" rings
EPDM Grade"E"
General Dimensions-mm/in
Size
21/2"
3"
4"
6"
8"
A
4.1
4.4
5.7
7.1
8.0
B
105
112
145
180
204
3.3
3.6
4.3
5.7
6.7
-12-
C
85
92
108
145
170
3.7 94.6
3.8 96.4
4.5 115.4
2.2 133.4
5.8 147.7
D
2.9
3.5
4.6
6.6
8.6
E
73.0
88.9
116.2
168.3
219.1
5.3
5.6
6.9
8.3
9.1
F
135
142
175
210
232
5.3
5.3
5.3
7.6
7.6
G
135
135
135
193
193
4.9
4.9
4.9
8.9
8.9
H
125
125
125
225
225
0.4
0.9
11.2
24.0
Fivalco
Firefly Butterfly Valves
Grooved Ends UL/ULc Listed FM Approved
Fig No:
Firefly BG
175PSI
MateriaIs List
PART NAME
Body
Disc
Stems
Gear Housing
Hand Wheel
Flag
Yoke
Conduit Conn.
"O" Rings
MATERIAL
Bronze ASTM B505
Ductile lron ASTM A 536 EPDM Encapsulated
Stainless Steel ASTM564
Steel ASTM A619
Steel ASTM A619
Brass ASTM B16
Steel ASTM A283
Steel ASTM A307
EPDM Grade"E"
General Dimensions-mm/in
Size
A
2" 4.56 114
21/2" 4.56 114
B
2.41 60.3
3.0
75
C
2.29
2.75
D
57.15
69. 1
0.64
0.64
E
16
16
0.32
0.32
F
8
8
1.96
2.18
49
54.5
G
3.62 90.5
3.82 95.5
Fivalco
FireflyButterfly Valves
Threaded Ends UL/ULc Listed FM Approved
Fig No:
Firefly BT
175PSI
MateriaIs List
PART NAME
Body
Disc
Stems
Gear Housing
Hand Wheel
Flag
Yoke
Conduit Conn.
"O" Rings
MATERIAL
Bronze ASTM B505
Ductile lron ASTM A 536 EPDM Encapsulated
Stainless Steel ASTM564
Steel ASTM A619
Steel ASTM A619
Brass ASTM B16
Steel ASTM A283
Steel ASTM A307
EPDM Grade"E"
General Dimensions-mm/in
Size
1"
11/4"
11/2"
2"
21/2"
A
1.75
2.16
2.40
3.04
3.60
-14-
B
43.70
54.00
60.00
76.00
90.00
1.56
1.96
2.24
2.80
3.36
C
39.70
49.00
56.00
70.00
84.00
2.16
2.68
2.92
3.30
4.16
D
54.00
67.00
73.00
82.40
104.00
2.08
2.24
2.36
2.56
2.78
E
52.00
56.00
59.00
64.00
69.50
1.48
1.64
2.45
1.96
2.18
37.00
41.00
61.30
49.00
54.50
Fivalco
Design Requirements
The Fivalco grooved butterfly valve should be connected to the piping system with approved
couplings or flange adapters. Flow may be from either direction, and the valve may be positioned
in any direction.
Fivalco butterfly valves have been designed with a slow close hand wheel operator which
effectively minimizes water hammer. These valves feature minimum flow restriction and
pressure loss when in the fully open position.
Installation
When the valves are received they should be handled carefully to avoid breakage and damage
to the seating area. Before installation of the valve,clean piping, flange and coupling. When
the valve closes hard, it is usually due to debris lodged in the sealing area. Often this may be
corrected by backing off the hand wheel and closing again.
The valve should never be forced to seat by applying a wrench to the hand wheel as this may
distort the valve components or score the sealing surface.The use of excessive force to open
or close the valve violates all warranties whether express or implied.
The inlet and outlet pipe adjacent to the valve should be properly supported to prevent excessive
stress on the valve body. The valve should not be used to force a pipeline into position as this
may result in distortion of the valve body.
Conduit and elecrical connections to the optional tamper switch must be in accordance with
National Electrical Code(NFPA 72)and/or requirements of the local authority having jurisdiction.
Care &Maintenance
Switch Installation
Fivalco butterfly valves are provided with internal supervisory position switches.The tamper
switch operates by a cam connected to the vallve stem.The switch will change position and
close within two(2)full turns of the hand wheel from the fully open position.
Switch#1:
For connection to the supervisory circuit.
Normally closed :2 Yellow
Normally open :2 Red
Common
:2 White
S-1
FIRE ALARM
CONTROL PANEL
SUPERVISORY CIRCUIT
COMMON(WHITE)
Switch#2:
Auxiliary switch connected per authority.
Normally closed :1Blue
Normally open :1Orange
Common
:1 Black
Ground Lead
:1Green
OPEN(RED)
CLOSED(YELLOW)
(GREEN)
S-2
VOLTAGE
SOURCE
COMMON(BLACK)
END OF LINE
RESISTOR OR
NEXT DEVICE
OPEN(ORANGE)
CLOSED(BLUE)
NOTES 1.RATED:5A-1/6HP-125/250V
AUX.DEVICE
(BELL OR HORN)
DISTRIBUTOR
Fivalco Inc.
Anaheim Californiai
E-mail:mikokokcn@yahoo.com