Sie sind auf Seite 1von 4

Code.

No: 16028
NR SET-1
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
III B.TECH II SEM SUPPLEMENTARY EXAMINATIONS FEBRUARY - 2010
COMMUNICATION ENGINEERING
(ELECTRONICS AND INSTRUMENTATION ENGINEERING)
Time: 3hours Max.Marks:80
Answer any FIVE questions
All questions carry equal marks
---

1.a) Explain the method of detecting SSB using coherent detector.


b) What are the advantages of balanced modulator over a simple non-linear circuit? [8+8]

2.a) Explain Preemphasis and deemphasis with neat circuit diagrams.


b) Explain the working principle of Varactor diode modulator for FM generation. [8+8]

3.a) Explain the requirements of carrier frequency for a radio transmitter.


b) Explain the working of broadcast transmitter? [8+8]

4.a) What is simple automatic gain control? What are its functions? What is
delayed AGC and what are its merits compared to simple AGC?
b) Discuss the considerations in the choice of I.F. and the design of I.F. stage. [8+8]

5.a) Explain the phenomena of fading in detail.


b) Describe different diversity reception techniques including the MUSA system to combat
fading. [8+8]

6.a) What is Pulse Modulation? Classify pulse modulation systems.


b) State and explain Sampling Theorem. [8+8]

7.a) Draw the block diagram of a Delta Modulation and explain its operation with waveform.
b) What is meant by Slope-overload error in Delta modulation? Explain. [8+8]

8.a) Compare Datagram packet switching with Virtual circuit packet switching.
b) Explain serial and parallel transmission of data. [8+8]

--ooOoo--
Code.No: 16028
NR SET-2
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
III B.TECH II SEM SUPPLEMENTARY EXAMINATIONS FEBRUARY - 2010
COMMUNICATION ENGINEERING
(ELECTRONICS AND INSTRUMENTATION ENGINEERING)
Time: 3hours Max.Marks:80
Answer any FIVE questions
All questions carry equal marks
---

1.a) Explain the requirements of carrier frequency for a radio transmitter.


b) Explain the working of broadcast transmitter? [8+8]

2.a) What is simple automatic gain control? What are its functions? What is
delayed AGC and what are its merits compared to simple AGC?
b) Discuss the considerations in the choice of I.F. and the design of I.F. stage. [8+8]

3.a) Explain the phenomena of fading in detail.


b) Describe different diversity reception techniques including the MUSA system to combat
fading. [8+8]

4.a) What is Pulse Modulation? Classify pulse modulation systems.


b) State and explain Sampling Theorem. [8+8]

5.a) Draw the block diagram of a Delta Modulation and explain its operation with waveform.
b) What is meant by Slope-overload error in Delta modulation? Explain. [8+8]

6.a) Compare Datagram packet switching with Virtual circuit packet switching.
b) Explain serial and parallel transmission of data. [8+8]

7.a) Explain the method of detecting SSB using coherent detector.


b) What are the advantages of balanced modulator over a simple non-linear circuit? [8+8]

8.a) Explain Preemphasis and deemphasis with neat circuit diagrams.


b) Explain the working principle of Varactor diode modulator for FM generation. [8+8]

--ooOoo--
Code.No: 16028
NR SET-3
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
III B.TECH II SEM SUPPLEMENTARY EXAMINATIONS FEBRUARY - 2010
COMMUNICATION ENGINEERING
(ELECTRONICS AND INSTRUMENTATION ENGINEERING)
Time: 3hours Max.Marks:80
Answer any FIVE questions
All questions carry equal marks
---

1.a) Explain the phenomena of fading in detail.


b) Describe different diversity reception techniques including the MUSA system to combat
fading. [8+8]

2.a) What is Pulse Modulation? Classify pulse modulation systems.


b) State and explain Sampling Theorem. [8+8]

3.a) Draw the block diagram of a Delta Modulation and explain its operation with waveform.
b) What is meant by Slope-overload error in Delta modulation? Explain. [8+8]

4.a) Compare Datagram packet switching with Virtual circuit packet switching.
b) Explain serial and parallel transmission of data. [8+8]

5.a) Explain the method of detecting SSB using coherent detector.


b) What are the advantages of balanced modulator over a simple non-linear circuit? [8+8]

6.a) Explain Preemphasis and deemphasis with neat circuit diagrams.


b) Explain the working principle of Varactor diode modulator for FM generation. [8+8]

7.a) Explain the requirements of carrier frequency for a radio transmitter.


b) Explain the working of broadcast transmitter? [8+8]

8.a) What is simple automatic gain control? What are its functions? What is
delayed AGC and what are its merits compared to simple AGC?
b) Discuss the considerations in the choice of I.F. and the design of I.F. stage. [8+8]

--ooOoo--
Code.No: 16028
NR SET-4
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
III B.TECH II SEM SUPPLEMENTARY EXAMINATIONS FEBRUARY - 2010
COMMUNICATION ENGINEERING
(ELECTRONICS AND INSTRUMENTATION ENGINEERING)
Time: 3hours Max.Marks:80
Answer any FIVE questions
All questions carry equal marks
---

1.a) Draw the block diagram of a Delta Modulation and explain its operation with waveform.
b) What is meant by Slope-overload error in Delta modulation? Explain. [8+8]

2.a) Compare Datagram packet switching with Virtual circuit packet switching.
b) Explain serial and parallel transmission of data. [8+8]

3.a) Explain the method of detecting SSB using coherent detector.


b) What are the advantages of balanced modulator over a simple non-linear circuit? [8+8]

4.a) Explain Preemphasis and deemphasis with neat circuit diagrams.


b) Explain the working principle of Varactor diode modulator for FM generation. [8+8]

5.a) Explain the requirements of carrier frequency for a radio transmitter.


b) Explain the working of broadcast transmitter? [8+8]

6.a) What is simple automatic gain control? What are its functions? What is
delayed AGC and what are its merits compared to simple AGC?
b) Discuss the considerations in the choice of I.F. and the design of I.F. stage. [8+8]

7.a) Explain the phenomena of fading in detail.


b) Describe different diversity reception techniques including the MUSA system to combat
fading. [8+8]

8.a) What is Pulse Modulation? Classify pulse modulation systems.


b) State and explain Sampling Theorem. [8+8]

--ooOoo--

Das könnte Ihnen auch gefallen