Beruflich Dokumente
Kultur Dokumente
Native and configurable IEC61850 support for both vertical and horizontal
communication
Advanced HMI functionality by color touchscreen and embedded WEB server
One common powerful tool for application and communication engineering
(including IEC61850)
Application
Three set of hardware and software modules are available for the main
application areas
The
packages
include
the
tested
and
documented
factory
default
configuration. By means of EuroCAP software the user can modify the factory
defined functions or can create new ones.
Inserting additional HW modules on-site is also possible.
Application
* Future plan
Application
Application
Application
Selection table
* Future plan
Selection table
* Future plan
Selection table
* Future plan
Hardware design
Front panel
Subrack
EP+ cards
Number of inputs: 4
Rated current In: 1A, 5 A (electronically
selectable)
Current measuring range: 0250 A
Thermal withstand: 20 A (continuously)
500 A (for 1 s)
1200 A (for 10 ms)
EP+ cards
20 x I0n (for 10 s)
100 x I0n (for 1 s)
EP+ cards
500 A (for 1 s)
1200 A (for 10 ms)
EP+ cards
Voltage transformer (VT)
Number of inputs: 4
Rated voltage (Un): 100/3, 100V,
200/3, 200V (electronically selectable)
Voltage measuring range: 0 240 V
Continuous voltage withstand: 250 V
Burden: 100V 0.2VA, 200V 0.8VA
Frequency measuring range: 45-1500Hz
EP+ cards
Binary inputs
Opto8 (O8)
Number of independent inputs: 8
Rating voltage: 110V 220V DC
Clamp voltage: 0.6Un 0.8Un,
Digitally filtered per channel
Current drain approx.: 2 mA
Opto16 (O16)
Two groups of common minus
inputs, 8 pcs each
Rating voltage 110V, 220V DC
Clamp voltage 0.6Un 0.8Un,
Digitally filtered per channel
Current drain approx. 2 mA
EP+ cards
Signalling contacts
Relay4 (R4)
4 pcs independent change-over
contacts
Rated voltage: 250 V AC/DC
Continuous carry: 8 A
Breaking capacity, DC (L/R=40ms)
at 220 V DC: 0,2 A
Relay8 (R8)
8 pcs NO or NC contacts (jumper
selectable)
Rated voltage 250 V AC/DC
Continuous carry 8 A
Breaking capacity, DC (L/R=40ms)
at 220 V DC: 0,2 A
EP+ cards
Signalling contacts
Relay16 (R16)
Two groups of common plus output,
8 pcs each NO or NC contacts
(jumper selectable)
Rated voltage 250 V AC/DC
Continuous carry 8 A
Breaking capacity, DC (L/R=40ms)
at 220 V DC: 0,2 A
EP+ cards
Trip contacts
Number of contacts: 4 making
contacts
Rated voltage: 250 V AC/DC
Continuous carry: 8 A
Making capacity: 0.5s, 30 A
Breaking capacity: DC (L/R=40ms):
at 220 VDC 4A
Trip circuit supervision for each trip
contact
EP+ cards
Transducer output (TA)
4 channel isolated output
0-20mA 500,
4-20mA 500,
0-6mA 2k
6mA 2k
* Future plan
EP+ cards
Power supply
Type A (standard)
Rated voltage Uaux: 86 265 VDC
110-220 VAC
Type B (optional)
AC/DC: 1872 V*
Programmable window comparator for system
voltages
Input voltage supervisor
Internal relay fault indication
* Future plan
EP+ software
Time synchronization
Tools
Tools - EuroCAP
Tools - EuroCAP
Graphical editor
Factory defined logical elements (AND, OR, RS flip-flop, etc.)
Creation of graphical macros
Tools - EuroCAP
Display editor
Tools - EuroCAP
Display editor
Features
Add user defined screens to the built-in screens
Tools - EuroCAP
Features of IEC61850 generator
Features
The service is accessible from the front panel connector or from the rear panel fiber/RJ-45
connectors
The web pages are tested with the most popular browsers like Microsoft Internet Explorer,
Mozilla Firefox, Opera and Safari
The server is accessible using handheld devices which include web browsers
Functions
settings, view status and log files, set time sync mode,...
Download device documentation (user manuals)
Remote access to the front panel HMI via web browser
Discover devices connected to the same network with Network ProtectionHood function
Thank You