Beruflich Dokumente
Kultur Dokumente
Contents
SNFA is now a part of the SKF Group.
Our new, super-precision bearings are
built on the combined expertise of SKF
and SNFA, using the best technology
from each.
The result is leading-edge products. In
addition to the most comprehensive
assortment of state of the art superprecision bearings, customers now have
access to the advanced modelling and
virtual testing services that are at the
core of SKFs technical expertise.
This unique capability the most sophisticated in the industry enables
super-precision bearing customers to
go beyond bearings and look at all aspects of their application.
A.
C.
Product information
4
5
5
6
Applications . . . . . . . . . . . . . . . . . . . . . 8
B.
Recommendations
Product data
20
20
20
20
21
25
26
27
27
28
29
29
29
29
30
31
31
Bearing selection. . . . . . . . . . . . . . . . . 10
With core competencies in bearings,
seals, lubrication, mechatronics and
services, your SKF-SNFA team is poised
to partner with you to meet the requirements of your next generation of
machine tools.
SKF the knowledge engineering
company
Product tables. . . . . . . . . . . . . . . . . . . . 34
Bearing arrangement design. . . . . . . .
Single bearings. . . . . . . . . . . . . . . . . . .
Bearing sets. . . . . . . . . . . . . . . . . . . . . .
Type of arrangement. . . . . . . . . . . . . . .
Application examples. . . . . . . . . . . . . . .
11
11
11
12
14
16
16
16
17
18
D.
Additional information
1) Where
Machine tool design is becoming increasingly complex, particularly for multiple axis
machining centres. Exceptional demands
are placed on the main sub-assemblies such
as the drives. SKF-SNFA sealed super-precision angular contact ball bearings provide
optimum performance in applications where
there is a need for high reliability and super
ior accuracy. The bearings are filled with
high-speed grease. Non-contact seals keep
the grease in and contaminants out of the
bearings, with the lowest possible temperature rise and without compromising speed
capability.
These relubrication-free bearings are
particularly suitable for metal cutting and
woodworking machines.
applicable, designations in parentheses and italics refer to the corresponding SNFA equivalent.
The assortment
Sealed angular contact ball bearings in the
S719 .. B (HB .. /S) and S70 .. B (HX .. /S)
series have now been added to the SKFSNFA assortment of super-precision bearings. To accommodate the diverse operating
requirements of precision applications,
bearings in these series are available with
three contact angles and two ball materials.
Benefits
Shorter mounting time
Prevent entry of contaminants, relubrication-free, extended bearing service life
High-speed capability, good thermal stability
Provide a high degree of rigidity
Superior running accuracy, short running-in time
Facilitated mounting
Compact cross sections
Accommodate radial loads, and axial loads in one direction
Low friction, high-speed capability
High-speed, B design
bearings
Super-precision single row angular contact
ball bearings in the S719 .. B (HB .. /S) and
S70 .. B (HX .. /S) series are designed for
high-speed operation and are best suited for
light load and low temperature operating
conditions.
Features of B design bearings include:
asymmetrical inner and outer rings
a high number of very small balls
a lightweight phenolic resin cage
an optimized chamfer design
The asymmetrical bearing rings enable the
bearings to accommodate radial loads, and
axial loads in one direction. The outer ring
shoulder-guided cage is designed to enable
good lubricant supply to the ball/raceway
contact areas. The shape of the chamfer of
the inner and outer rings is optimized for
improved mounting accuracy. As a result,
mounting is not only facilitated, but there is
also less risk of damage to associated components. When compared to other angular
contact ball bearings in the 719 and 70 ser
ies, B design bearings have the greatest
possible number of very small balls for increased rigidity.
A non-contact seal is fitted, standard, on
both sides of the bearing outer ring. The
seal forms an extremely narrow gap with
the cylindrical surface of the inner ring
shoulder.
Bearing series
r1
b
r2
719 (HB) series
70 (HX) series
Bearing variants
Based on the operating conditions in precision applications, bearing requirements can
vary. As a result, there are many variants of
SKF-SNFA super-precision angular contact
ball bearings in the 719 .. B (HB) and 70 .. B
(HX) series to choose from.
Standard bearings are manufactured with
an integral seal fitted on both sides and filled
with premium grease. As there is no friction
generated at the seal lip, the attainable
speed of a sealed bearing is equivalent to
acomparably sized open bearing.
15
18
25
Sealed variant
Steel balls
Ceramic balls
Open variant
Contact angles
Standard bearings are manufactured with
the following contact angles:
a 15 contact angle, designation suffix
CB(1)
a 25 contact angle, designation suffix
ACB(3)
Bearings with an 18 contact angle, designation suffix FB(2), are available on
request.
With three contact angles to choose from,
designers can optimize their application
based on axial load, speed and rigidity
requirements.
Ball materials
Open bearings
Applications
In the highly contaminated environment of
amachine tool spindle, one of the primary
causes of premature bearing failure is the
ingress of solid contaminants and/or cutting
fluid into the bearing cavity. To eliminate this
problem, the SKF-SNFA assortment of
sealed super-precision angular contact ball
bearings in the S719 .. B (HB .. /S) and
S70 .. B (HX .. /S) series is an excellent solution. The ability ofthe bearings to provide a
high degree of rigidity and accommodate
high speeds with extremely low runout provides a variety of benefits for different
applications.
Applications
Electro-spindles
Metal cutting machines
Woodworking machines
Milling machines
Machining centres
Requirements
Efficient sealing against
contaminants
Low energy consumption
Long service life
Facilitated mounting
Increased machine uptime
High power density for
compactdesigns
High positioning accuracy
Solution
Bearing selection
Bearing selection is paramount when dealing with applications that require a high
degree of accuracy at high speeds. The
many variants of SKF-SNFA sealed superprecision angular contact ball bearings are
well suited to accommodate the conditions
dictated by these applications.
The main criteria when selecting bearings
in the S719 .. B (HB .. /S) and S70 .. B
(HX .. /S) series are:
precision
rigidity
speed
load
Precision
When dealing with rolling bearings, precision is described by tolerance classes for
running and dimensional accuracy.
When selecting bearings in the S719 .. B
(HB .. /S) and S70 .. B (HX .. /S) series, the
following should be considered:
All bearing variants are manufactured,
standard, to P4A (better than ABEC 7)
tolerance class.
All bearing variants can be manufactured
to the higher precision PA9A (better than
ABEC 9) tolerance class, on request.
Rigidity
In precision applications, the rigidity of the
bearing arrangement is extremely import
ant, as the magnitude of elastic deformation
under load determines the productivity and
accuracy of the equipment. Although bearing stiffness contributes to system rigidity,
there are other influencing factors such as
the number and position of the bearings.
When selecting bearings in the S719 .. B
(HB .. /S) and S70 .. B (HX .. /S) series, the
following should be considered:
Ceramic (silicon nitride) balls provide a
higher degree of stiffness than steel balls.
10
Speed
High-speed applications require cool-running, low-friction bearings like super-precision angular contact ball bearings.
When selecting bearings in the S719 .. B
(HB .. /S) and S70 .. B (HX .. /S) series, the
following should be considered:
Hybrid bearings can operate at higher
speeds than comparably sized all-steel
bearings.
As the contact angle increases, speed
capability decreases.
Load
In high-speed precision applications, the
load carrying capacity of a bearing is typically less important than in general engineering applications. Angular contact ball bearings can accommodate radial and axial loads
acting simultaneously. When these combined loads exist, the direction of the load
also plays an important role in the selection
process.
When selecting bearings in the S719 .. B
(HB .. /S) and S70 .. B (HX .. /S) series, the
following should be considered:
The greater the contact angle, thehigher
the axial load carrying capacity of the
bearing.
The axial load carrying capacity of a
bearing arrangement can be increased
byadding bearings mounted in tandem.
Single bearings
SKF-SNFA bearings in the S719 .. B
(HB .. /S) and S70 .. B (HX .. /S) series are
available as single (stand-alone) bearings or
single, universally matchable bearings.
When ordering single bearings, indicate the
number of individual bearings required.
Single bearings
Single bearings are intended for arrangements where only one bearing is used in
each bearing position.
Although the widths of the bearing rings
are made to very tight tolerances, these
bearings are not suitable for mounting immediately adjacent to each other.
Bearing sets
SKF-SNFA bearings in the S719 .. B
(HB .. /S) and S70 .. B (HX .. /S) series are
available as matched bearing sets or as sets
of universally matchable bearings. When
ordering bearing sets, indicate the number
of bearing sets required (the number of individual bearings per set is specified in the
designation).
What to order
Bearing designation1)
Order example
S719 .. BG../P4A
(HB .. /S 7CE .. U..)
3 x S71914 CBGA/P4A
(3 x HB70 /S 7CE1 UL)
S719 .. B/P4ATG..
(HB .. /S 7CE .. TU..)
1 x S71914 CB/P4ATGA
(1 x HB70 /S 7CE1 TUL)
S719 .. B/P4AT..
(HB .. /S 7CE .. TD..)
1 x S71914 CB/P4ATBTA
(1 x HB70 /S 7CE1 TDL)
1) For
11
Type of arrangement
Universally matchable bearings and
matched bearing sets can be arranged in
various combinations depending on the
stiffness, rigidity and load requirements of
the application. The possible combinations
are shown in fig. 1, including the designation suffixes applicable to matched bearing
sets.
Back-to-back bearing
arrangement
In a back-to-back bearing arrangement, the
load lines diverge toward the bearing axis.
Axial loads acting in both directions can be
accommodated, but only by one bearing or
bearing set in one direction each. Bearings
mounted back-to-back provide a relatively
rigid bearing arrangement that can also
accommodate tilting moments.
12
Face-to-face bearing
arrangement
In a face-to-face bearing arrangement, the
load lines converge toward the bearing axis.
Axial loads acting in both directions can be
accommodated, but only by one bearing or
bearing set in one direction each. Face-toface arrangements can accommodate small
amounts of deflection.
Fig. 1
Bearing sets with 2 bearings
Back-to-back arrangement
Designation suffix DB (DD)
Face-to-face arrangement
Designation suffix DF (FF)
Tandem arrangement
Designation suffix DT (T)
Tandem arrangement
Designation suffix TT (3T)
Tandem arrangement
Designation suffix QT (4T)
13
Application examples
Sealed super-precision angular contact ball
bearings are common in, but not limited to,
machine tool applications. Depending on the
type of machine tool and its intended purpose, spindles may have different requirements regarding bearing arrangements.
14
15
Sealed bearings
SKF-SNFA sealed bearings in the S719 .. B
(HB .. /S) and S70 .. B (HX .. /S) series are
relubrication-free under normal operating
conditions. They are filled with a high-grade,
low viscosity grease as standard. The grease
is characterized by:
high-speed capability (speed factor A up
to 1 600 000 mm/min)
excellent ageing resistance
very good rust inhibiting properties
The technical specifications of the grease
are provided in table 1. The quantity of
grease fills approximately 15% of the free
space in the bearing.
Table 2
Reference grease quantity for initial grease fill estimation
Bearing
Bore diameter
Size
Table 1
Technical specifications of the grease in
sealed bearings
Properties
Grease
specification
Thickener
Special lithium
soap
Ester/PAO
Temperature range
[C]
[F]
40 to +120
40 to +250
Kinematic viscosity
[mm2/s]
at 40 C
at 100 C
25
6
mm
cm3
30
35
40
45
06
07
08
09
0,7
1,0
1,4
1,8
1,4
1,8
2,2
2,9
50
55
60
65
10
11
12
13
1,9
2,6
2,8
3,0
3,1
4,7
5,0
5,5
70
75
80
85
14
15
16
17
4,5
4,8
5,3
6,5
7,3
7,7
10,5
11,0
90
95
100
110
18
19
20
22
7,4
7,5
10,0
11,4
14,1
14,7
15,3
22,3
120
24
14,0
23,7
1) Refers
16
Running-in of sealed
and open, grease
lubricated bearings
A grease lubricated super-precision bearing
will initially run with a relatively high frictional moment. If the bearing is run at high
speed without a running-in period, the tem-
where
A = speed factor [mm/min]
n = rotational speed [r/min]
dm = bearing mean diameter
= 0,5 (d + D) [mm]
perature rise can be considerable. The relatively high frictional moment is due to the
churning of the grease and it takes time for
the excess grease to work its way out of the
contact zone. For open bearings, this time
period can be minimized by applying a small
quantity of grease distributed evenly on
both sides of the bearing during the assembly stage. Spacers between two adjacent
Diagram 1
1,0
0,9
0,8
G = K Gref
0,7
where
G = initial grease fill [cm3]
K = a calculation factor dependent on the
speed factor A ( diagram 1)
Gref = reference grease quantity
( table 2) [cm3]
0,5
0,6
0,4
0,3
0,2
0,1
0
0,2
0,4
0,6
0,8
1,0
1,2
1,4
1,6
Speed factor A [106 mm/min]
Diagram 2
Graphic representation of a running-in procedure
Temperature [C]
Speed [r/min]
Absolute temperature limit
60
Operating
speed of the
system
20
Stage 1
Stage 2
Stage 3
Stage 4
Stage 5
0
Time [h]
Operating temperature
Speed
17
Fig. 1
Mixing valve
0,5 to 10 m
Helical coil
18
Fig. 2
Table 3
Oil nozzle position for oil-air lubrication
d dn
Bearing
Bore diameter
Size
mm
mm
30
35
40
45
06
07
08
09
36,6
43
49,1
54,2
40
46,1
51,6
57,2
50
55
60
65
10
11
12
13
58,7
64,8
69,8
74,8
61,8
69,2
74,2
79
70
75
80
85
14
15
16
17
81,9
86,9
91,7
99,2
86,1
91,1
98
103
90
95
100
110
18
19
20
22
103,9
109
116,1
125,7
110
115
120
134,6
120
24
138,2
144,7
19
Chamfer dimensions
Tolerances
Table 1
Class P4A tolerances
Inner ring
d
over incl.
dmp
high
mm
18
30
50
80
30
50
80
120
low
ds
high
low
Vdp
max
Vdmp
max
Bs
high
low
5
6
7
8
0
0
0
0
5
6
7
8
1,5
1,5
2
2,5
1
1
1,5
1,5
0
0
0
0
Outer ring
D
over incl.
Dmp
high
low
Ds
high
low
VDp
max
VDmp
max
Cs, C1s
mm
2
2
2,5
4
6
1,5
1,5
1,5
1,5
3
30
50
80
120
150
20
50
80
120
150
180
0
0
0
0
0
6
7
8
9
10
0
0
0
0
0
6
7
8
9
10
low
0
0
0
0
B1s
high
120
120
150
200
0
0
0
0
250
250
250
380
VBs
max
Kia
max
Sd
max
Sia
max
1,5
1,5
1,5
2,5
2,5
2,5
2,5
2,5
1,5
1,5
1,5
2,5
2,5
2,5
2,5
2,5
VCs
max
Kea
max
SD
max
Sea
max
1,5
1,5
2,5
2,5
4
2,5
4
5
5
6
1,5
1,5
2,5
2,5
4
2,5
4
5
5
6
Bearing preload
Preload in sets of universally
matchable bearings and
matched bearing sets prior to
mounting
A single super-precision angular contact ball
bearing does not have any preload. Preload
can only be obtained when one bearing is
placed against another to provide location in
the opposite direction.
Universally matchable bearings and
matched bearing sets are manufactured so
that when the bearings are placed against
each other, prior to mounting, a certain
preload will result.
Table 2
Class PA9A tolerances
Inner ring
d
over incl.
dmp
high
mm
18
30
50
80
30
50
80
120
low
ds
high
low
Vdp
max
Vdmp
max
Bs
high
low
2,5
2,5
4
5
0
0
0
0
2,5
2,5
4
5
1,5
1,5
2
2,5
1
1
1,5
1,5
0
0
0
0
Outer ring
D
over incl.
Dmp
high
low
Ds
high
low
VDp
max
VDmp
max
Cs, C1s
mm
2
2
2,5
2,5
4
1,5
1,5
1,5
1,5
3
30
50
80
120
150
50
80
120
150
180
0
0
0
0
0
4
4
5
5
7
0
0
0
0
0
4
4
5
5
7
low
0
0
0
0
B1s
high
120
120
150
200
0
0
0
0
250
250
250
380
VBs
max
Kia
max
Sd
max
Sia
max
1,5
1,5
1,5
2,5
2,5
2,5
2,5
2,5
1,5
1,5
1,5
2,5
2,5
2,5
2,5
2,5
VCs
max
Kea
max
SD
max
Sea
max
1,5
1,5
2,5
2,5
2,5
2,5
4
5
5
5
1,5
1,5
2,5
2,5
2,5
2,5
4
5
5
5
21
where
Gm = preload in the mounted bearing set
[N]
GA,B,C = built-in preload in the bearing set,
prior to mounting ( table 3) [N]
f
= a bearing factor dependent on the
bearing series and size ( table 4)
f1 = a correction factor dependent on the
contact angle ( table 5)
f2 = a correction factor dependent on the
preload class ( table 5)
fHC = a correction factor for hybrid
bearings ( table 5)
Gm = f f1 f2 fHC GA,B,C
Table 3
Axial preload of universally matchable bearings and matched bearing pairs, prior to mounting, arranged back-to-back or face-to-face
Bearing
Bore
Size
diameter
d
Axial preload
of bearings in the series1)
S719 CB (HB /S CE1)
S719 CB/HC (HB /S/NS CE1)
for preload class
A
B
C
mm
30
35
40
45
06
07
08
09
16
17
18
24
32
34
36
48
96
100
110
145
27
29
31
41
54
58
62
82
160
175
185
245
21
23
24
31
42
46
48
62
125
140
145
185
36
38
41
54
72
76
82
110
215
230
245
330
50
55
60
65
10
11
12
13
26
33
34
35
52
66
68
70
155
200
205
210
43
55
57
60
86
110
115
120
260
330
340
360
33
46
48
49
66
92
96
98
200
275
290
295
56
78
80
85
110
155
160
170
330
470
480
510
70
75
80
85
14
15
16
17
45
46
52
54
90
92
105
110
270
275
310
325
75
80
87
93
150
160
175
185
450
480
520
560
64
65
78
80
130
130
155
160
390
390
470
480
110
115
150
150
220
230
300
300
660
690
900
900
90
95
100
110
18
19
20
22
59
60
72
86
120
120
145
170
355
360
430
515
100
105
125
145
200
210
250
290
600
630
750
870
92
94
96
125
185
190
190
250
550
570
570
750
160
165
165
210
320
330
330
420
960
990
990
1 260
120
24
90
180
540
155
310
930
130
260
780
220
440
1 320
1) Data
22
is also applicable to open bearings. Data for bearings with an 18 contact angle is available on request.
Table 4
Size
Bearing factor f
for all-steel bearings in the series1)
S719 .. B (HB .. /S)
mm
30
35
40
45
06
07
08
09
1,07
1,06
1,06
1,08
1,03
1,04
1,04
1,05
50
55
60
65
10
11
12
13
1,09
1,09
1,11
1,13
1,06
1,06
1,06
1,07
70
75
80
85
14
15
16
17
1,1
1,11
1,13
1,11
1,07
1,08
1,07
1,08
90
95
100
110
18
19
20
22
1,12
1,13
1,11
1,14
1,07
1,07
1,08
1,07
120
24
1,13
1,08
1) Data
Table 5
Correction factors for calculating the preload in mounted bearing sets
Correction factors
f1
f2
for preload class
A
B
1
0,99
1
0,99
1
1
1
1
1,02
1,02
1,03
1,02
1,07
1,07
1,08
1,08
1
1
1,01
1,01
1
0,99
1
0,99
1
1
1
1
1,02
1,01
1,02
1,02
1,05
1,04
1,05
1,05
1
1
1,01
1,01
Bearing series1)
Fig. 1
1) Data
fHC
is also applicable to open bearings. Data for bearings with an 18 contact angle is available on request.
23
Table 6
Guidelines for spacer ring modification
Preload change of a bearing set
Width reduction
Value
a
b
a+b
inner
inner
inner
outer
outer
outer
a
b
a+b
outer
outer
outer
inner
inner
inner
Table 7
Guideline values for spacer ring width reduction
a, b
a, b
a, b
Increasing the preload
(back-to-back arrangement)
Bearing
Bore
diameter
d
Size
a, b
Decreasing the preload
(back-to-back arrangement)
mm
30
35
40
45
50
06
07
08
09
10
3
3
3
3
3
8
8
8
9
9
2
2
2
2
2
6
6
6
6
6
3
3
3
4
4
10
10
10
10
11
2
2
2
3
3
7
7
7
7
7
55
60
65
70
75
11
12
13
14
15
4
4
4
4
4
11
11
11
12
12
2
2
2
3
3
7
7
7
8
8
4
4
5
5
5
12
13
13
15
15
3
3
3
3
3
9
9
9
10
10
80
85
90
95
100
16
17
18
19
20
4
4
5
5
5
12
12
13
13
14
3
3
3
3
3
8
8
9
9
9
6
6
7
7
7
16
16
18
18
18
4
4
4
4
4
12
12
13
13
13
110
120
22
24
5
5
16
16
4
4
10
10
7
7
19
19
4
4
13
13
1) Data
24
is also applicable to open bearings. Data for bearings with an 18 contact angle is available on request.
Table 8
Static axial stiffness for bearing pairs arranged back-to-back or face-to-face
Bearing
Bore
Size
diameter
d
mm
N/m
30
35
40
45
06
07
08
09
16
17
19
22
20
22
24
29
33
34
39
47
68
74
84
98
87
95
107
126
130
142
158
190
22
25
28
31
29
33
36
40
46
52
57
64
100
106
121
138
126
136
158
183
190
204
233
280
50
55
60
65
10
11
12
13
24
24
26
27
32
32
34
36
50
53
54
58
102
106
112
122
132
136
146
158
202
206
214
238
33
38
41
41
43
50
54
54
69
80
86
85
147
170
178
185
183
215
225
239
273
331
338
359
70
75
80
85
14
15
16
17
31
32
33
35
39
42
44
47
63
68
68
74
132
148
140
158
167
190
184
201
251
287
272
308
47
50
52
54
63
65
68
71
99
104
109
112
212
235
278
278
268
299
353
353
405
451
529
533
90
95
100
110
18
19
20
22
34
36
45
46
46
46
60
59
72
74
95
96
152
164
205
201
192
208
266
257
294
317
403
392
54
56
58
71
71
74
76
93
112
117
120
147
246
258
262
309
317
330
337
396
480
497
510
597
120
24
49
65
104
225
290
437
75
98
156
333
427
641
1) Data
is also applicable to open bearings. Data for bearings with an 18 contact angle is available on request.
25
K Pa
Nb
Mt =
K [Fs + (NcpFc) + GA,B,C]
Mt =
It is difficult to accurately calculate the tightening torque Mt. The following formulas can
be used as guidelines, but the results should
be verified during operation.
The axial clamping force for a precision
lock nut or the bolts in an end cap is
Fig. 2
Pa = Fs + (NcpFc) + GA,B,C
The tightening torque for a precision lock
nut is
Nb
where
Mt = tightening torque [Nmm]
Pa = axial clamping force [N]
Fs = minimum axial clamping force
(table 9) [N]
Fc = axial fitting force ( table 9) [N]
GA,B,C = built-in bearing preload, prior to
mounting ( table 3 on page 22)
[N]
Ncp = the number of preloaded bearings
Nb = the number of end cap bolts
K
= a calculation factor dependent on
the thread ( table 10)
Mt = K Pa
= K [Fs + (NcpFc) + GA,B,C]
Table 9
Minimum axial clamping force and axial fitting force for precision lock nuts and end caps
Bearing
Bore diameter
Size
mm
30
35
40
45
06
07
08
09
1 900
2 600
3 100
3 800
2 500
3 300
4 100
4 500
300
440
500
480
550
750
750
750
50
55
60
65
10
11
12
13
3 100
4 100
4 500
4 800
5 000
6 000
6 500
7 000
380
430
400
370
650
800
750
700
70
75
80
85
14
15
16
17
6 500
6 500
7 000
9 000
8 500
9 000
11 000
11 000
500
480
650
900
800
750
1 200
1 400
90
95
100
110
18
19
20
22
9 500
10 000
12 000
13 000
16 000
14 000
15 000
20 000
850
850
1 000
900
1 700
1 500
1 400
1 800
120
24
16 000
22 000
1 200
1 900
1) Data
26
Factor K
for
precision
locknuts
M4
M5
M6
M8
0,8
1
1,2
1,6
M 10
M 12
M 14
M 15
1,4
1,6
1,9
2
2
2,4
2,7
2,9
M 16
M 17
M 20
M 25
2,1
2,2
2,6
3,2
3,1
M 30
M 35
M 40
M 45
3,9
4,5
5,1
5,8
M 50
M 55
M 60
M 65
6,4
7
7,6
8,1
M 70
M 75
M 80
M 85
9
9,6
10
11
M 90
M 95
M 100
M 105
11
12
12
13
M 110
M 120
M 130
M 140
14
15
16
17
M 150
M 160
18
19
1) Applicable
Fa = Gm
For bearing pairs under radial load and
preloaded by springs
Fa = GA,B,C
For bearing pairs under axial load and
mounted with an interference fit
Fa = Gm + 0,67 Ka
Fa = Ka
for Ka 3 Gm
for Ka > 3 Gm
Calculation factor
for
C
C0
Pu
1,62
2,16
2,64
27
for Fa/Fr e
for Fa/Fr > e
for Fa/Fr e
for Fa/Fr > e
where
P = equivalent dynamic load of the bearing
set [kN]
Fr = radial component of the load acting on
the bearing set [kN]
Fa = axial component of the load acting on
the bearing set [kN]
The values for the calculation factors e, X, Y,
Y1 and Y2 depend on the bearing contact
angle and are listed in tables 12 and 13.
Forbearings with a 15 contact angle, the
factors also depend on the relationship
f0Fa/C0 where f0 is the calculation factor
andC0 is the basic static load rating, both
ofwhich are listed in the product tables.
Table 12
Calculation factors for single bearings and bearings paired in tandem
f0Fa/C0
Calculation factors
e
X
Y0
0,178
0,357
0,714
1,07
0,38
0,4
0,43
0,46
0,44
0,44
0,44
0,44
1,47
1,4
1,3
1,23
0,46
0,46
0,46
0,46
1,43
2,14
3,57
5,35
0,47
0,5
0,55
0,56
0,44
0,44
0,44
0,44
1,19
1,12
1,02
1
0,46
0,46
0,46
0,46
0,68
0,41
0,87
0,38
Table 13
Calculation factors for bearing pairs arranged back-to-back or face-to-face
Calculation factors
e
X
Y1
Y2
Y0
0,178
0,357
0,714
1,07
0,38
0,4
0,43
0,46
0,72
0,72
0,72
0,72
1,65
1,57
1,46
1,38
2,39
2,28
2,11
2
0,92
0,92
0,92
0,92
1,43
2,14
3,57
5,35
0,47
0,5
0,55
0,56
0,72
0,72
0,72
0,72
1,34
1,26
1,14
1,12
1,93
1,82
1,66
1,63
0,92
0,92
0,92
0,92
0,68
0,67
0,92
1,41
0,76
28
Attainable speeds
2 f0Fa/C0
Cages
Materials
Heat treatment
Seals
The non-contact seals in SKF-SNFA
S719 .. B (HB .. /S) and S70 .. B (HX .. /S)
series bearings are made of acrylonitrilebutadiene rubber (NBR) and are designed
for high-speed operation (speed factor A up
to 1 600 000 mm/min). The permissible operating temperature range of the seals is
25 to +100 C and up to 120 C for brief
periods.
Table 14
Fig. 3
Speed reduction factors for bearing sets
Number of
bearings
Arrangement
Designation suffix
Back-to-back
Face-to-face
DB (DD)
DF (FF)
0,83
0,8
0,78
0,74
0,58
0,54
TBT (TD)
TFT (TF)
0,72
0,64
0,66
0,56
0,4
0,3
Tandem back-to-back
Tandem face-to-face
QBC (TDT)
QFC (TFT)
0,67
0,64
0,64
0,6
0,48
0,41
29
Marking of bearings
and bearing sets
Each SKF-SNFA bearing in the S719 .. B
(HB .. /S) and S70 .. B (HX .. /S) series has
various identifiers on the external surfaces
of the rings ( fig. 4):
1 SKF trademark
2 Complete designation of the bearing
3 Country of manufacture
4 Date of manufacture, coded
5 Deviation from the mean outside
diameter, DDm [m]
6 Deviation from the mean bore diameter,
Ddm [m]
7 Serial number (bearing sets only)
8 V-shaped marking (matched bearing
sets only)
V-shaped marking
Fig. 5
A V-shaped marking on the outside surface of the outer rings of matched bearing
sets indicates how the bearings should be
mounted to obtain the proper preload in
theset. The marking also indicates how the
bearing set should be mounted in relation
tothe axial load. The V-shaped marking
should point in the direction in which the
axial load will act on the inner ring (
fig. 5). In applications where there are axial
loads in both directions, the V-shaped
marking should point toward the greater of
the two loads.
Fa
Fig. 4
6
5
8
2
30
Packaging
Fig. 6
Designation system
31
Designation system for SKF-SNFA super-precision angular contact ball bearings in the 719 .. B (HB) and 70 .. B (HX) series
Single bearing:
S71912 ACBGA/HCP4A
719
12
Variant
prefix
Series
Size
70
06
ACB
GA
Execution
Contact
angle
and preload
and design (single bearing)
CB
HC
Ball
material
Tolerance
Arrangement Preload
class
Variant (prefix)
S
V
Bearing series
719
70
Bearing size
6
to
24
P4A
PA9A
QBC
Fabric reinforced phenolic resin, outer ring centred (no designation suffix)
Ball material
HC
Tolerance class
P4A
PA9A
Dimensional accuracy in accordance with ISO tolerance class 4, running accuracy better than ISO tolerance class 4
Dimensional and running accuracy better than ABMA tolerance class ABEC 9
1) For
32
Variant
suffix
L
Table 15
SNFA designation system for super-precision angular contact ball bearings in the 719 .. B (HB) and 70 .. B (HX) series
Single bearing:
HB60 /S/NS 7CE3 UL
Variant
/S
/XN
HB
60
/S
/NS
CE
Series and
design
Size
Variant
Ball
material
Tolerance
class
Cage
Contact
angle
Arrangement
Preload
HX
30
/GH
CE
TDT
Contact angle
1
2
3
15 contact angle
18 contact angle
25 contact angle
30 mm bore diameter
Ball material
/NS
Tolerance class
7
9
Dimensional and running accuracy in accordance with ABMA tolerance class ABEC 7
Dimensional and running accuracy in accordance with ABMA tolerance class ABEC 9
33
r2
r2
r4
r2
C1
r3
C2
r1
D D1
C3
d d1
Sealed variant
Basic load ratings
dynamic1) static
Fatigue
load limit
Calculation
factor
Pu
f0
kN
mm
Open variant
Principal dimensions
D
C0
kN
Attainable speed
Mass3)
when lubricating with
grease
oil-air2)
r/min
kg
30
47
47
47
47
55
55
55
55
9
9
9
9
13
13
13
13
4,88
4,88
4,62
4,62
6,5
6,5
6,18
6,18
3,15
3,15
3
3
4,15
4,15
3,9
3,9
0,134
0,134
0,127
0,127
0,176
0,176
0,166
0,166
9,5
9,5
9,4
9,4
40 000
48 000
36 000
43 000
36 000
43 000
34 000
40 000
60 000
75 000
56 000
67 000
56 000
67 000
50 000
60 000
0,050
0,047
0,050
0,047
0,13
0,13
0,13
0,13
S71906 CB/P4A
S71906 CB/HCP4A
S71906 ACB/P4A
S71906 ACB/HCP4A
S7006 CB/P4A
S7006 CB/HCP4A
S7006 ACB/P4A
S7006 ACB/HCP4A
HB30 /S 7CE1
HB30 /S/NS 7CE1
HB30 /S 7CE3
HB30 /S/NS 7CE3
HX30 /S 7CE1
HX30 /S/NS 7CE1
HX30 /S 7CE3
HX30 /S/NS 7CE3
35
55
55
55
55
62
62
62
62
10
10
10
10
14
14
14
14
5,2
5,2
4,88
4,88
6,89
6,89
6,5
6,5
3,65
3,65
3,45
3,45
4,8
4,8
4,55
4,55
0,156
0,156
0,146
0,146
0,204
0,204
0,193
0,193
9,7
9,7
9,6
9,6
34 000
40 000
30 000
36 000
32 000
38 000
28 000
34 000
53 000
63 000
48 000
56 000
48 000
60 000
43 000
53 000
0,081
0,077
0,081
0,077
0,17
0,16
0,17
0,16
S71907 CB/P4A
S71907 CB/HCP4A
S71907 ACB/P4A
S71907 ACB/HCP4A
S7007 CB/P4A
S7007 CB/HCP4A
S7007 ACB/P4A
S7007 ACB/HCP4A
HB35 /S 7CE1
HB35 /S/NS 7CE1
HB35 /S 7CE3
HB35 /S/NS 7CE3
HX35 /S 7CE1
HX35 /S/NS 7CE1
HX35 /S 7CE3
HX35 /S/NS 7CE3
40
62
62
62
62
68
68
68
68
12
12
12
12
15
15
15
15
5,4
5,4
5,07
5,07
7,41
7,41
6,89
6,89
4,15
4,15
4
4
5,6
5,6
5,3
5,3
0,176
0,176
0,166
0,166
0,236
0,236
0,224
0,224
9,8
9,8
9,8
9,8
30 000
36 000
28 000
32 000
28 000
34 000
26 000
32 000
45 000
56 000
43 000
50 000
43 000
53 000
40 000
48 000
0,12
0,12
0,12
0,12
0,21
0,20
0,21
0,20
S71908 CB/P4A
S71908 CB/HCP4A
S71908 ACB/P4A
S71908 ACB/HCP4A
S7008 CB/P4A
S7008 CB/HCP4A
S7008 ACB/P4A
S7008 ACB/HCP4A
HB40 /S 7CE1
HB40 /S/NS 7CE1
HB40 /S 7CE3
HB40 /S/NS 7CE3
HX40 /S 7CE1
HX40 /S/NS 7CE1
HX40 /S 7CE3
HX40 /S/NS 7CE3
45
68
68
68
68
75
75
75
75
12
12
12
12
16
16
16
16
7,41
7,41
7,02
7,02
9,56
9,56
9,04
9,04
5,7
5,7
5,4
5,4
7,2
7,2
6,8
6,8
0,245
0,245
0,232
0,232
0,305
0,305
0,285
0,285
9,7
9,7
9,6
9,6
28 000
32 000
24 000
30 000
26 000
30 000
24 000
28 000
43 000
50 000
38 000
45 000
40 000
48 000
36 000
43 000
0,14
0,13
0,14
0,13
0,26
0,25
0,26
0,25
S71909 CB/P4A
S71909 CB/HCP4A
S71909 ACB/P4A
S71909 ACB/HCP4A
S7009 CB/P4A
S7009 CB/HCP4A
S7009 ACB/P4A
S7009 ACB/HCP4A
HB45 /S 7CE1
HB45 /S/NS 7CE1
HB45 /S 7CE3
HB45 /S/NS 7CE3
HX45 /S 7CE1
HX45 /S/NS 7CE1
HX45 /S 7CE3
HX45 /S/NS 7CE3
50
72
72
72
72
80
80
80
80
12
12
12
12
16
16
16
16
7,61
7,61
7,28
7,28
9,95
9,95
9,36
9,36
6,2
6,2
5,85
5,85
7,8
7,8
7,35
7,35
0,265
0,265
0,25
0,25
0,335
0,335
0,31
0,31
9,8
9,8
9,7
9,7
26 000
30 000
22 000
28 000
24 000
28 000
22 000
26 000
38 000
45 000
36 000
43 000
36 000
45 000
32 000
40 000
0,14
0,13
0,14
0,13
0,29
0,28
0,29
0,28
S71910 CB/P4A
S71910 CB/HCP4A
S71910 ACB/P4A
S71910 ACB/HCP4A
S7010 CB/P4A
S7010 CB/HCP4A
S7010 ACB/P4A
S7010 ACB/HCP4A
HB50 /S 7CE1
HB50 /S/NS 7CE1
HB50 /S 7CE3
HB50 /S/NS 7CE3
HX50 /S 7CE1
HX50 /S/NS 7CE1
HX50 /S 7CE3
HX50 /S/NS 7CE3
1) The
basic dynamic load ratings listed in the product tables are calculated in accordance with ISO 281:2007 and cannot be compared with ratings calculated
by other calculation methods.
2) Applicable to open bearings only
3) Applicable to sealed bearings only
4) For designations of open bearings and other variants, refer to table 15 on pages 32 and 33.
34
ra
rb
ra
ra
Da db
da D b
Dimensions
d
d1
~
r1,2
min
r3,4
min
C3
C2
C1
mm
da,db
min
Da
max
Db
max
ra
max
rb
max
mm
30
36
36
36
36
39,5
39,5
39,5
39,5
43
43
43
43
47,2
47,2
47,2
47,2
0,3
0,3
0,3
0,3
1
1
1
1
0,15
0,15
0,15
0,15
0,6
0,6
0,6
0,6
12
12
16
16
12
12
16
16
32
32
32
32
34,6
34,6
34,6
34,6
45
45
45
45
50,4
50,4
50,4
50,4
45
45
45
45
50,4
50,4
50,4
50,4
0,3
0,3
0,3
0,3
1
1
1
1
0,15
0,15
0,15
0,15
0,6
0,6
0,6
0,6
35
42,5
42,5
42,5
42,5
45,5
45,5
45,5
45,5
49,5
49,5
49,5
49,5
53,3
53,3
53,3
53,3
0,6
0,6
0,6
0,6
1
1
1
1
0,3
0,3
0,3
0,3
0,6
0,6
0,6
0,6
14
14
18
18
14
14
18
18
38,2
38,2
38,2
38,2
39,6
39,6
39,6
39,6
51,8
51,8
51,8
51,8
57,4
57,4
57,4
57,4
51,8
51,8
51,8
51,8
57,4
57,4
57,4
57,4
0,6
0,6
0,6
0,6
1
1
1
1
0,3
0,3
0,3
0,3
0,6
0,6
0,6
0,6
40
48,5
48,5
48,5
48,5
51
51
51
51
55,6
55,6
55,6
55,6
58,8
58,8
58,8
58,8
0,6
0,6
0,6
0,6
1
1
1
1
0,3
0,3
0,3
0,3
0,6
0,6
0,6
0,6
15
15
20
20
15
15
20
20
2,8
2,8
2,8
2,8
3,6
3,6
3,6
3,6
1,7
1,7
1,7
1,7
2,6
2,6
2,6
2,6
5,9
5,9
5,9
5,9
7,8
7,8
7,8
7,8
2
2
2
2
1,5
1,5
1,5
1,5
43,2
43,2
43,2
43,2
44,6
44,6
44,6
44,6
58,8
58,8
58,8
58,8
63,4
63,4
63,4
63,4
58,8
58,8
58,8
58,8
63,4
63,4
63,4
63,4
0,6
0,6
0,6
0,6
1
1
1
1
0,3
0,3
0,3
0,3
0,6
0,6
0,6
0,6
45
53,5
53,5
53,5
53,5
56,5
56,5
56,5
56,5
61,8
61,8
61,8
61,8
65,5
65,5
65,5
65,5
0,6
0,6
0,6
0,6
1
1
1
1
0,3
0,3
0,3
0,3
0,6
0,6
0,6
0,6
16
16
22
22
16
16
22
22
2,8
2,8
2,8
2,8
3,6
3,6
3,6
3,6
1,7
1,7
1,7
1,7
2,6
2,6
2,6
2,6
5,9
5,9
5,9
5,9
8,6
8,6
8,6
8,6
2
2
2
2
1,5
1,5
1,5
1,5
48,2
48,2
48,2
48,2
49,6
49,6
49,6
49,6
64,8
64,8
64,8
64,8
70,4
70,4
70,4
70,4
64,8
64,8
64,8
64,8
70,4
70,4
70,4
70,4
0,6
0,6
0,6
0,6
1
1
1
1
0,3
0,3
0,3
0,3
0,6
0,6
0,6
0,6
50
58
58
58
58
61,5
61,5
61,5
61,5
66
66
66
66
70,7
70,7
70,7
70,7
0,6
0,6
0,6
0,6
1
1
1
1
0,3
0,3
0,3
0,3
0,6
0,6
0,6
0,6
17
17
23
23
17
17
23
23
2,8
2,8
2,8
2,8
2,6
2,6
2,6
2,6
1,7
1,7
1,7
1,7
2,6
2,6
2,6
2,6
5,9
5,9
5,9
5,9
8,6
8,6
8,6
8,6
5,9
5,9
5,9
5,9
1,5
1,5
1,5
1,5
53,2
53,2
53,2
53,2
54,6
54,6
54,6
54,6
68,8
68,8
68,8
68,8
75,4
75,4
75,4
75,4
68,8
68,8
68,8
68,8
75,4
75,4
75,4
75,4
0,6
0,6
0,6
0,6
1
1
1
1
0,3
0,3
0,3
0,3
0,6
0,6
0,6
0,6
35
r2
r2
r4
r2
C1
r3
C2
r1
D D1
C3
d d1
Sealed variant
Basic load ratings
dynamic1) static
Fatigue
load limit
Calculation
factor
Pu
f0
kN
mm
Open variant
Principal dimensions
D
C0
kN
Attainable speed
Mass3)
when lubricating with
grease
oil-air2)
r/min
kg
55
80
80
80
80
90
90
90
90
13
13
13
13
18
18
18
18
9,95
9,95
9,36
9,36
14
14
13,3
13,3
8,15
8,15
7,65
7,65
11
11
10,4
10,4
0,345
0,345
0,325
0,325
0,465
0,465
0,44
0,44
9,8
9,8
9,7
9,7
22 000
28 000
20 000
24 000
22 000
26 000
19 000
24 000
34 000
43 000
32 000
38 000
32 000
40 000
30 000
36 000
0,19
0,18
0,19
0,18
0,42
0,40
0,42
0,40
S71911 CB/P4A
S71911 CB/HCP4A
S71911 ACB/P4A
S71911 ACB/HCP4A
S7011 CB/P4A
S7011 CB/HCP4A
S7011 ACB/P4A
S7011 ACB/HCP4A
HB55 /S 7CE1
HB55 /S/NS 7CE1
HB55 /S 7CE3
HB55 /S/NS 7CE3
HX55 /S 7CE1
HX55 /S/NS 7CE1
HX55 /S 7CE3
HX55 /S/NS 7CE3
60
85
85
85
85
95
95
95
95
13
13
13
13
18
18
18
18
10,4
10,4
9,75
9,75
14,6
14,6
13,5
13,5
8,8
8,8
8,3
8,3
12
12
11,4
11,4
0,375
0,375
0,355
0,355
0,51
0,51
0,48
0,48
9,8
9,8
9,7
9,7
22 000
26 000
19 000
22 000
19 000
24 000
17 000
22 000
32 000
40 000
30 000
36 000
30 000
36 000
26 000
32 000
0,20
0,19
0,20
0,19
0,45
0,43
0,45
0,43
S71912 CB/P4A
S71912 CB/HCP4A
S71912 ACB/P4A
S71912 ACB/HCP4A
S7012 CB/P4A
S7012 CB/HCP4A
S7012 ACB/P4A
S7012 ACB/HCP4A
HB60 /S 7CE1
HB60 /S/NS 7CE1
HB60 /S 7CE3
HB60 /S/NS 7CE3
HX60 /S 7CE1
HX60 /S/NS 7CE1
HX60 /S 7CE3
HX60 /S/NS 7CE3
65
90
90
90
90
100
100
100
100
13
13
13
13
18
18
18
18
10,6
10,6
9,95
9,95
15,6
15,6
14,6
14,6
9,5
9,5
9
9
12,9
12,9
12,2
12,2
0,4
0,4
0,38
0,38
0,55
0,55
0,52
0,52
9,9
9,9
9,7
9,7
20 000
24 000
18 000
22 000
18 000
22 000
16 000
19 000
30 000
36 000
28 000
34 000
28 000
34 000
26 000
30 000
0,22
0,20
0,22
0,20
0,47
0,45
0,47
0,45
S71913 CB/P4A
S71913 CB/HCP4A
S71913 ACB/P4A
S71913 ACB/HCP4A
S7013 CB/P4A
S7013 CB/HCP4A
S7013 ACB/P4A
S7013 ACB/HCP4A
HB65 /S 7CE1
HB65 /S/NS 7CE1
HB65 /S 7CE3
HB65 /S/NS 7CE3
HX65 /S 7CE1
HX65 /S/NS 7CE1
HX65 /S 7CE3
HX65 /S/NS 7CE3
70
100
100
100
100
110
110
110
110
16
16
16
16
20
20
20
20
13,5
13,5
12,7
12,7
19
19
18,2
18,2
12,2
12,2
11,6
11,6
16,3
16,3
15,6
15,6
0,52
0,52
0,49
0,49
0,695
0,695
0,655
0,655
9,9
9,9
9,6
9,6
18 000
22 000
16 000
19 000
17 000
20 000
15 000
18 000
28 000
32 000
24 000
30 000
26 000
30 000
24 000
28 000
0,36
0,34
0,36
0,34
0,47
0,63
0,47
0,63
S71914 CB/P4A
S71914 CB/HCP4A
S71914 ACB/P4A
S71914 ACB/HCP4A
S7014 CB/P4A
S7014 CB/HCP4A
S7014 ACB/P4A
S7014 ACB/HCP4A
HB70 /S 7CE1
HB70 /S/NS 7CE1
HB70 /S 7CE3
HB70 /S/NS 7CE3
HX70 /S 7CE1
HX70 /S/NS 7CE1
HX70 /S 7CE3
HX70 /S/NS 7CE3
75
105
105
105
105
115
115
115
115
16
16
16
16
20
20
20
20
14
14
13,3
13,3
19,9
19,9
19
19
13,2
13,2
12,5
12,5
17,6
17,6
16,6
16,6
0,56
0,56
0,52
0,52
0,75
0,75
0,71
0,71
9,9
9,9
9,7
9,7
17 000
20 000
15 000
18 000
16 000
18 000
14 000
17 000
26 000
30 000
24 000
28 000
24 000
28 000
22 000
26 000
0,38
0,36
0,38
0,36
0,70
0,66
0,70
0,66
S71915 CB/P4A
S71915 CB/HCP4A
S71915 ACB/P4A
S71915 ACB/HCP4A
S7015 CB/P4A
S7015 CB/HCP4A
S7015 ACB/P4A
S7015 ACB/HCP4A
HB75 /S 7CE1
HB75 /S/NS 7CE1
HB75 /S 7CE3
HB75 /S/NS 7CE3
HX75 /S 7CE1
HX75 /S/NS 7CE1
HX75 /S 7CE3
HX75 /S/NS 7CE3
1) The
basic dynamic load ratings listed in the product tables are calculated in accordance with ISO 281:2007 and cannot be compared with ratings calculated
by other calculation methods.
2) Applicable to open bearings only
3) Applicable to sealed bearings only
4) For designations of open bearings and other variants, refer to table 15 on pages 32 and 33.
36
ra
rb
ra
ra
Da db
da D b
Dimensions
d
d1
~
r1,2
min
r3,4
min
C3
C2
C1
mm
da,db
min
Da
max
Db
max
ra
max
rb
max
mm
55
64
64
64
64
68,2
68,2
68,2
68,2
73,2
73,2
73,2
73,2
79,3
79,3
79,3
79,3
1
1
1
1
1,1
1,1
1,1
1,1
0,3
0,3
0,3
0,3
0,6
0,6
0,6
0,6
19
19
26
26
19
19
26
26
3,8
3,8
3,8
3,8
4,3
4,3
4,3
4,3
1,7
1,7
1,7
1,7
2,8
2,8
2,8
2,8
6,5
6,5
6,5
6,5
9
9
9
9
2
2
2
2
2,2
2,2
2,2
2,2
59,6
59,6
59,6
59,6
61
61
61
61
75,4
75,4
75,4
75,4
84
84
84
84
75,4
75,4
75,4
75,4
84
84
84
84
1
1
1
1
1
1
1
1
0,3
0,3
0,3
0,3
0,6
0,6
0,6
0,6
60
69
69
69
69
73,2
73,2
73,2
73,2
78,3
78,3
78,3
78,3
84,3
84,3
84,3
84,3
1
1
1
1
1,1
1,1
1,1
1,1
0,3
0,3
0,3
0,3
0,6
0,6
0,6
0,6
19
19
27
27
19
19
27
27
3,8
3,8
3,8
3,8
4,3
4,3
4,3
4,3
1,7
1,7
1,7
1,7
2,8
2,8
2,8
2,8
6,5
6,5
6,5
6,5
9
9
9
9
2
2
2
2
2,2
2,2
2,2
2,2
64,6
64,6
64,6
64,6
66
66
66
66
80,4
80,4
80,4
80,4
89
89
89
89
80,4
80,4
80,4
80,4
89
89
89
89
1
1
1
1
1
1
1
1
0,3
0,3
0,3
0,3
0,6
0,6
0,6
0,6
65
74
74
74
74
78
78
78
78
83,4
83,4
83,4
83,4
89,6
89,6
89,6
89,6
1
1
1
1
1,1
1,1
1,1
1,1
0,3
0,3
0,3
0,3
0,6
0,6
0,6
0,6
20
20
28
28
20
20
28
28
3,8
3,8
3,8
3,8
4,3
4,3
4,3
4,3
1,7
1,7
1,7
1,7
2,8
2,8
2,8
2,8
6,5
6,5
6,5
6,5
9,7
9,7
9,7
9,7
2
2
2
2
1,5
1,5
1,5
1,5
69,6
69,6
69,6
69,6
71
71
71
71
85,4
85,4
85,4
85,4
94
94
94
94
85,4
85,4
85,4
85,4
94
94
94
94
1
1
1
1
1
1
1
1
0,3
0,3
0,3
0,3
0,6
0,6
0,6
0,6
70
81
81
81
81
85
85
85
85
91,6
91,6
91,6
91,6
97,8
97,8
97,8
97,8
1
1
1
1
1,1
1,1
1,1
1,1
0,3
0,3
0,3
0,3
0,6
0,6
0,6
0,6
22
22
31
31
22
22
31
31
3,8
3,8
3,8
3,8
4,4
4,4
4,4
4,4
1,7
1,7
1,7
1,7
2,9
2,9
2,9
2,9
8,6
8,6
8,6
8,6
10,9
10,9
10,9
10,9
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
74,6
74,6
74,6
74,6
76
76
76
76
95,4
95,4
95,4
95,4
104
104
104
104
95,4
95,4
95,4
95,4
104
104
104
104
1
1
1
1
1
1
1
1
0,3
0,3
0,3
0,3
0,6
0,6
0,6
0,6
75
86
86
86
86
90
90
90
90
97,5
97,5
97,5
97,5
102,8
102,8
102,8
102,8
1
1
1
1
1,1
1,1
1,1
1,1
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
22
22
32
32
22
22
32
32
3,8
3,8
3,8
3,8
4,4
4,4
4,4
4,4
2,7
2,7
2,7
2,7
2,9
2,9
2,9
2,9
8,6
8,6
8,6
8,6
10,9
10,9
10,9
10,9
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
79,6
79,6
79,6
79,6
81
81
81
81
100
100
100
100
109
109
109
109
100
100
100
100
109
109
109
109
1
1
1
1
1
1
1
1
0,3
0,3
0,3
0,3
0,6
0,6
0,6
0,6
37
r2
r4
r2
r2
C1
r3
C2
r1
D D1
Fatigue
load limit
Calculation
factor
Pu
f0
kN
mm
C0
kN
Open variant
Principal dimensions
B
C3
d d1
Sealed variant
Attainable speed
Mass3)
when lubricating with
grease
oil-air2)
r/min
kg
80
110
110
110
110
125
125
125
125
16
16
16
16
22
22
22
22
15,6
15,6
14,8
14,8
26,5
26,5
25,1
25,1
14,6
14,6
14
14
22,8
22,8
21,6
21,6
0,63
0,63
0,585
0,585
0,95
0,95
0,9
0,9
9,9
9,9
9,6
9,6
16 000
19 000
14 000
17 000
14 000
17 000
12 000
15 000
24 000
30 000
22 000
26 000
20 000
26 000
19 000
22 000
0,40
0,37
0,40
0,37
0,92
0,86
0,92
0,86
S71916 CB/P4A
S71916 CB/HCP4A
S71916 ACB/P4A
S71916 ACB/HCP4A
S7016 CB/P4A
S7016 CB/HCP4A
S7016 ACB/P4A
S7016 ACB/HCP4A
HB80 /S 7CE1
HB80 /S/NS 7CE1
HB80 /S 7CE3
HB80 /S/NS 7CE3
HX80 /S 7CE1
HX80 /S/NS 7CE1
HX80 /S 7CE3
HX80 /S/NS 7CE3
85
120
120
120
120
130
130
130
130
18
18
18
18
22
22
22
22
16,3
16,3
15,3
15,3
27
27
25,1
25,1
16,3
16,3
15,3
15,3
23,6
23,6
22,4
22,4
0,68
0,68
0,64
0,64
0,965
0,965
0,915
0,915
10
10
9,6
9,6
15 000
18 000
13 000
16 000
13 000
16 000
12 000
14 000
22 000
28 000
20 000
24 000
20 000
24 000
18 000
22 000
0,59
0,56
0,59
0,56
0,96
0,90
0,96
0,90
S71917 CB/P4A
S71917 CB/HCP4A
S71917 ACB/P4A
S71917 ACB/HCP4A
S7017 CB/P4A
S7017 CB/HCP4A
S7017 ACB/P4A
S7017 ACB/HCP4A
HB85 /S 7CE1
HB85 /S/NS 7CE1
HB85 /S 7CE3
HB85 /S/NS 7CE3
HX85 /S 7CE1
HX85 /S/NS 7CE1
HX85 /S 7CE3
HX85 /S/NS 7CE3
90
125
125
125
125
140
140
140
140
18
18
18
18
24
24
24
24
17,8
17,8
16,8
16,8
29,1
29,1
27
27
17,6
17,6
16,6
16,6
25
25
23,6
23,6
0,72
0,72
0,68
0,68
0,98
0,98
0,93
0,93
10
10
9,7
9,7
14 000
16 000
12 000
15 000
12 000
15 000
11 000
13 000
22 000
26 000
19 000
22 000
19 000
24 000
17 000
20 000
0,61
0,58
0,61
0,58
1,25
1,20
1,25
1,20
S71918 CB/P4A
S71918 CB/HCP4A
S71918 ACB/P4A
S71918 ACB/HCP4A
S7018 CB/P4A
S7018 CB/HCP4A
S7018 ACB/P4A
S7018 ACB/HCP4A
HB90 /S 7CE1
HB90 /S/NS 7CE1
HB90 /S 7CE3
HB90 /S/NS 7CE3
HX90 /S 7CE1
HX90 /S/NS 7CE1
HX90 /S 7CE3
HX90 /S/NS 7CE3
95
130
130
130
130
145
145
145
145
18
18
18
18
24
24
24
24
18,2
18,2
17,2
17,2
29,6
29,6
27,6
27,6
18,6
18,6
17,6
17,6
26
26
24,5
24,5
0,75
0,75
0,71
0,71
1
1
0,95
0,95
10
10
9,7
9,7
13 000
16 000
12 000
14 000
12 000
14 000
11 000
13 000
20 000
24 000
18 000
22 000
18 000
22 000
16 000
19 000
0,64
0,61
0,64
0,61
1,30
1,20
1,30
1,20
S71919 CB/P4A
S71919 CB/HCP4A
S71919 ACB/P4A
S71919 ACB/HCP4A
S7019 CB/P4A
S7019 CB/HCP4A
S7019 ACB/P4A
S7019 ACB/HCP4A
HB95 /S 7CE1
HB95 /S/NS 7CE1
HB95 /S 7CE3
HB95 /S/NS 7CE3
HX95 /S 7CE1
HX95 /S/NS 7CE1
HX95 /S 7CE3
HX95 /S/NS 7CE3
100
140
140
140
140
150
150
150
150
20
20
20
20
24
24
24
24
21,6
21,6
20,8
20,8
29,6
29,6
28,1
28,1
22,4
22,4
21,2
21,2
27
27
25,5
25,5
0,865
0,865
0,815
0,815
1,02
1,02
0,98
0,98
10
10
9,8
9,8
12 000
15 000
11 000
13 000
11 000
13 000
10 000
12 000
19 000
24 000
17 000
20 000
17 000
20 000
15 000
18 000
0,88
0,83
0,88
0,83
1,40
1,30
1,40
1,30
S71920 CB/P4A
S71920 CB/HCP4A
S71920 ACB/P4A
S71920 ACB/HCP4A
S7020 CB/P4A
S7020 CB/HCP4A
S7020 ACB/P4A
S7020 ACB/HCP4A
HB100 /S 7CE1
HB100 /S/NS 7CE1
HB100 /S 7CE3
HB100 /S/NS 7CE3
HX100 /S 7CE1
HX100 /S/NS 7CE1
HX100 /S 7CE3
HX100 /S/NS 7CE3
1) The
basic dynamic load ratings listed in the product tables are calculated in accordance with ISO 281:2007 and cannot be compared with ratings calculated
by other calculation methods.
2) Applicable to open bearings only
3) Applicable to sealed bearings only
4) For designations of open bearings and other variants, refer to table 15 on pages 32 and 33.
38
ra
rb
ra
ra
Da db
da D b
Dimensions
d
d1
~
r1,2
min
r3,4
min
C3
C2
C1
mm
da,db
min
Da
max
Db
max
ra
max
rb
max
mm
80
90,7
90,7
90,7
90,7
96,7
96,7
96,7
96,7
102,2
102,2
102,2
102,2
111,4
111,4
111,4
111,4
1
1
1
1
1,1
1,1
1,1
1,1
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
25
25
35
35
25
25
35
35
3,8
3,8
3,8
3,8
4,7
4,7
4,7
4,7
2,7
2,7
2,7
2,7
3,2
3,2
3,2
3,2
8,6
8,6
8,6
8,6
11,1
11,1
11,1
11,1
2
2
2
2
2,5
2,5
2,5
2,5
84,6
84,6
84,6
84,6
86
86
86
86
105
105
105
105
119
119
119
119
105
105
105
105
119
119
119
119
1
1
1
1
1
1
1
1
0,3
0,3
0,3
0,3
0,6
0,6
0,6
0,6
85
98,2
98,2
98,2
98,2
101,7
101,7
101,7
101,7
110,2
110,2
110,2
110,2
116,4
116,4
116,4
116,4
1,1
1,1
1,1
1,1
1,1
1,1
1,1
1,1
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
26
26
36
36
26
26
36
36
4,5
4,5
4,5
4,5
4,7
4,7
4,7
4,7
2,9
2,9
2,9
2,9
3,2
3,2
3,2
3,2
9,3
9,3
9,3
9,3
11,1
11,1
11,1
11,1
2,2
2,2
2,2
2,2
2,5
2,5
2,5
2,5
91
91
91
91
91
91
91
91
114
114
114
114
124
124
124
124
114
114
114
114
124
124
124
124
1
1
1
1
1
1
1
1
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
90
103
103
103
103
108,7
108,7
108,7
108,7
115
115
115
115
125
125
125
125
1,1
1,1
1,1
1,1
1,5
1,5
1,5
1,5
0,6
0,6
0,6
0,6
1
1
1
1
28
28
39
39
28
28
39
39
4,5
4,5
4,5
4,5
5,2
5,2
5,2
5,2
2,9
2,9
2,9
2,9
4,2
4,2
4,2
4,2
9,3
9,3
9,3
9,3
13,4
13,4
13,4
13,4
2,2
2,2
2,2
2,2
2,2
2,2
2,2
2,2
96
96
96
96
97
97
97
97
119
119
119
119
133
133
133
133
119
119
119
119
133
133
133
133
1
1
1
1
1,5
1,5
1,5
1,5
0,6
0,6
0,6
0,6
1
1
1
1
95
108
108
108
108
113,7
113,7
113,7
113,7
120,7
120,7
120,7
120,7
130
130
130
130
1,1
1,1
1,1
1,1
1,5
1,5
1,5
1,5
0,6
0,6
0,6
0,6
1
1
1
1
28
28
40
40
28
28
40
40
4,5
4,5
4,5
4,5
5,2
5,2
5,2
5,2
2,9
2,9
2,9
2,9
4,2
4,2
4,2
4,2
9,3
9,3
9,3
9,3
13,4
13,4
13,4
13,4
2,2
2,2
2,2
2,2
2,2
2,2
2,2
2,2
101
101
101
101
102
102
102
102
124
124
124
124
138
138
138
138
124
124
124
124
138
138
138
138
1
1
1
1
1,5
1,5
1,5
1,5
0,6
0,6
0,6
0,6
1
1
1
1
100
115
115
115
115
118,7
118,7
118,7
118,7
128,7
128,7
128,7
128,7
135
135
135
135
1,1
1,1
1,1
1,1
1,5
1,5
1,5
1,5
0,6
0,6
0,6
0,6
1
1
1
1
29
29
41
41
29
29
41
41
4,5
4,5
4,5
4,5
5,2
5,2
5,2
5,2
2,9
2,9
2,9
2,9
4,2
4,2
4,2
4,2
10,9
10,9
10,9
10,9
13,4
13,4
13,4
13,4
2,2
2,2
2,2
2,2
2,2
2,2
2,2
2,2
106
106
106
106
107
107
107
107
134
134
134
134
143
143
143
143
134
134
134
134
143
143
143
143
1
1
1
1
1,5
1,5
1,5
1,5
0,6
0,6
0,6
0,6
1
1
1
1
39
r2
r4
r2
r2
C1
r3
C2
r1
D D1
Fatigue
load limit
Calculation
factor
Pu
f0
kN
mm
C0
kN
Open variant
Principal dimensions
B
C3
d d1
Sealed variant
Attainable speed
Mass3)
when lubricating with
grease
oil-air2)
r/min
kg
110
150
150
150
150
170
170
170
170
20
20
20
20
28
28
28
28
26
26
24,7
24,7
37,1
37,1
35,1
35,1
27
27
25,5
25,5
36
36
34
34
1
1
0,95
0,95
1,29
1,29
1,22
1,22
10
10
9,7
9,7
11 000
14 000
10 000
12 000
10 000
12 000
9 000
11 000
17 000
22 000
15 000
19 000
16 000
19 000
14 000
16 000
0,93
0,87
0,93
0,87
2,20
2,10
2,20
2,10
S71922 CB/P4A
S71922 CB/HCP4A
S71922 ACB/P4A
S71922 ACB/HCP4A
S7022 CB/P4A
S7022 CB/HCP4A
S7022 ACB/P4A
S7022 ACB/HCP4A
HB110 /S 7CE1
HB110 /S/NS 7CE1
HB110 /S 7CE3
HB110 /S/NS 7CE3
HX110 /S 7CE1
HX110 /S/NS 7CE1
HX110 /S 7CE3
HX110 /S/NS 7CE3
120
165
165
165
165
180
180
180
180
22
22
22
22
28
28
28
28
27
27
25,5
25,5
37,7
37,7
35,8
35,8
30,5
30,5
28,5
28,5
39
39
36,5
36,5
1,08
1,08
1,02
1,02
1,34
1,34
1,27
1,27
10
10
9,8
9,8
10 000
12 000
9 000
11 000
9 500
11 000
8 500
10 000
16 000
20 000
14 000
17 000
14 000
17 000
13 000
15 000
1,30
1,20
1,30
1,20
2,35
2,20
2,35
2,20
S71924 CB/P4A
S71924 CB/HCP4A
S71924 ACB/P4A
S71924 ACB/HCP4A
S7024 CB/P4A
S7024 CB/HCP4A
S7024 ACB/P4A
S7024 ACB/HCP4A
HB120 /S 7CE1
HB120 /S/NS 7CE1
HB120 /S 7CE3
HB120 /S/NS 7CE3
HX120 /S 7CE1
HX120 /S/NS 7CE1
HX120 /S 7CE3
HX120 /S/NS 7CE3
1) The
basic dynamic load ratings listed in the product tables are calculated in accordance with ISO 281:2007 and cannot be compared with ratings calculated
by other calculation methods.
2) Applicable to open bearings only
3) Applicable to sealed bearings only
4) For designations of open bearings and other variants, refer to table 15 on pages 32 and 33.
40
ra
rb
ra
ra
Da db
da D b
Dimensions
d
d1
~
r1,2
min
r3,4
min
C3
C2
C1
mm
da,db
min
Da
max
Db
max
ra
max
rb
max
mm
110
124,5
124,5
124,5
124,5
133,2
133,2
133,2
133,2
139
139
139
139
151,9
151,9
151,9
151,9
1,1
1,1
1,1
1,1
2
2
2
2
0,6
0,6
0,6
0,6
1
1
1
1
33
33
47
47
33
33
47
47
4,5
4,5
4,5
4,5
6,2
6,2
6,2
6,2
2,9
2,9
2,9
2,9
4,2
4,2
4,2
4,2
10,9
10,9
10,9
10,9
15,1
15,1
15,1
15,1
2,2
2,2
2,2
2,2
2,2
2,2
2,2
2,2
116
116
116
116
119
119
119
119
144
144
144
144
161
161
161
161
144
144
144
144
161
161
161
161
1
1
1
1
2
2
2
2
0,6
0,6
0,6
0,6
1
1
1
1
120
137
137
137
137
143,2
143,2
143,2
143,2
151,9
151,9
151,9
151,9
161,9
161,9
161,9
161,9
1,1
1,1
1,1
1,1
2
2
2
2
0,6
0,6
0,6
0,6
1
1
1
1
34
34
49
49
34
34
49
49
4,5
4,5
4,5
4,5
6,3
6,3
6,3
6,3
2,9
2,9
2,9
2,9
4,3
4,3
4,3
4,3
11,9
11,9
11,9
11,9
15,1
15,1
15,1
15,1
2,2
2,2
2,2
2,2
2,2
2,2
2,2
2,2
126
126
126
126
129
129
129
129
159
159
159
159
171
171
171
171
159
159
159
159
171
171
171
171
1
1
1
1
2
2
2
2
0,6
0,6
0,6
0,6
1
1
1
1
41
42
Other SKF-SNFA
super-precision bearings
Super-precision
angular contact ball
bearings in the 718
(SEA) series
SKF-SNFA super-precision angular contact
ball bearings in the 718 (SEA) series provide
optimum performance in applications where
a low cross section and high degree of rigidity, speed and superior accuracy are critical
design parameters. They are particularly
suitable for machine tool applications, multispindle drilling heads, robotic arms, measuring devices, racing car wheels and other
precision applications.
The standard assortment includes
all-steel bearings and hybrid bearings and
accommodates shaft diameters ranging
from 10 to 160 mm. To balance the need
forrotational speed and system rigidity,
thebearings are manufactured to different
preload classes.
Super-precision
angular contact thrust
ball bearings for screw
drives
Single direction angular
contact thrust ball bearings
Single direction angular contact thrust ball
bearings in the BSA and BSD (BS) series are
available for shaft diameters ranging from
12 to 75 mm. These bearings are characterized by superior axial stiffness and high
axial load carrying capacity.
43
Variant
18
Open
19
All-steel
Hybrid
All-steel
719 FB
719 DB
Hybrid
C719 FB
C719 DB
All-steel
S719 FB
S719 DB
Hybrid
SC719 FB
SC719 DB
All-steel
70 FB
70 DB
Hybrid
C70 FB
C70 DB
All-steel
S70 FB
S70 DB
Hybrid
SC70 FB
SC70 DB
Open
All-steel
BSA 2
Sealed
All-steel
BSA 2 2RS
BSA 2 2Z
Open
All-steel
BSA 3
Sealed
All-steel
BSA 3 2RS
BSA 3 2Z
Open
All-steel
BSD
Sealed
All-steel
BSD 2RS
BSD 2Z
Sealed
All-steel
BEAS
BEAM
Sealed
All-steel
FBSA
FBSD
Open
Sealed
10
Open
Sealed
02
03
44
Previous assortment
SKF bearings
SKF publication
in the series
High-precision bearings
(Publication No. 6002)
High-precision bearings
(Publication No. 6002)
High-precision bearings
(Publication No. 6002)
High-precision bearings
(Publication No. 6002)
High-precision bearings
(Publication No. 6002)
Table 1
SNFA bearings
in the series
SNFA publication
SEA 1
SEA 3
New assortment
SKF-SNFA bearings in the series
SKF publication
HB /NS CE1
HB /NS CE2
HB /NS CE3
HB /S CE1
HB /S CE2
HB /S CE3
HB /S/NS CE1
HB /S/NS CE2
HB /S/NS CE3
HX CE1
HX CE2
HX CE3
70 CB (HX CE1)
70 FB (HX CE2)
70 ACB (HX CE3)
HX /NS CE1
HX /NS CE2
HX /NS CE3
HX /S CE1
HX /S CE2
HX /S CE3
HX /S/NS CE1
HX /S/NS CE2
HX /S/NS CE3
BS 200
BS 200/S
BSA 3 (BS 3)
BS /
BS /S
BEAS (BEAS)
BEAM (BEAM)
BSDU, BSQU
45
SKF is also a leader in automotive by-wire technology, and has partnered with automotive engineers to develop two concept cars, which employ
SKF mechatronics for steering and braking. Further by-wire development has led SKF to produce
an all-electric forklift truck, which uses mechatronics rather than hydraulics for all controls.
Seals
Bearings
and units
Mechatronics
46
Lubrication
systems
Services
47
Bearings
and units
Mechatronics
Lubrication
systems
Services
Drawing on five areas of competence and application-specific expertise amassed over more than 100
years, SKF brings innovative solutions to OEMs and production facilities in every major industry worldwide. These five competence areas include bearings and units, seals, lubrication systems, mechatronics
(combining mechanics and electronics into intelligent systems), and a wide range of services, from 3-D
computer modelling to advanced condition monitoring and reliability and asset management systems.
A global presence provides SKF customers uniform quality standards and worldwide product availability.
skf.com