Beruflich Dokumente
Kultur Dokumente
1 of 17
http://www.techstreet.com/pages/boiler_code_2015_changes.html
Below is the summary of changes for the Boiler Pressure Vessel Code (BPVC) 2015
7/7/2015 8:05 AM
2015 ASME Boiler and Pressure Vessel Code (BPVC) | American Society...
2 of 17
http://www.techstreet.com/pages/boiler_code_2015_changes.html
7/7/2015 8:05 AM
2015 ASME Boiler and Pressure Vessel Code (BPVC) | American Society...
3 of 17
http://www.techstreet.com/pages/boiler_code_2015_changes.html
BPV II SG FS Section II, Part A; Revision of SA-213 Para. 6.2.2 to include S30432
BPV II SG FS Section II, Part A (1998 Edition); Intent Interpretation of SA-36/SA-36M Product
Analysis Requirement
BPV II SG FS Section II, Part A; Adoption of ASTM A31-14 as ASME SA-31
7/7/2015 8:05 AM
2015 ASME Boiler and Pressure Vessel Code (BPVC) | American Society...
4 of 17
http://www.techstreet.com/pages/boiler_code_2015_changes.html
Section II, Part D; Increase the Maximum Thickness of SA-841 Plates for SC VIII,
Divisions 1, 2, and 3 Code Construction
Section II, Part D; Re-evaluate the Cu-Si Alloy Trend Curves and Update Section II Part D Tables
Section II, Part D; Deletion of SB-283 TQ50 Stress Lines from Table 1B
BPV II SG Physical Properties Section II, Part D; Correction of Footnotes in Table TCD
Section II, Part D; Develop Table U and Y-1 Stress Values for Alloys A95052, A95083, A95086
BPV II Section II, Part D, Revision to Appendix 5, 5-800
Section II, Part D; Correction to Table 3 Bolting Stress Values for Cu-Si Alloys
Section II, Part D; Addition of SA-336/SA-336M F91 for SC VIII-2 use up to 1200F (649C) in
Table 5A
7/7/2015 8:05 AM
2015 ASME Boiler and Pressure Vessel Code (BPVC) | American Society...
5 of 17
http://www.techstreet.com/pages/boiler_code_2015_changes.html
Stress Indices for Branch Connections for r/R < or = 0.5 15-10
Editorial Revision to NB-3112.2 (b), NG-3112.2 (a), and NH-3112.2 (a) to replace "Subsection" with
"Article" and "Centigrade" with "Celsius".
NB-3653.6 Meaning of moment term in Equation 13
BPV III Incorporate the technical content of essential portions of BPV Section III Article NB hopper
diagram notes into the body of Code
Definitions of Local Primary Membrane Stress Intensity and Local Thin Areas
BPV III Editorial Revisions to ASME BPV III NB-,NC- and ND-3600
ASME BPV III, Section III changes to implement revised Bolting Sm values
NB-3224.3 and Figure NB-3224-1 and methods to calculate collapse load
Incorporation of acceptance of ASNT SNT-TC-1A 2011 into Section III.
BPV-III-NB, NB-3222.2 "Primary Plus Secondary Stress Intensity (Range)"
BPV III Section III updated Design by Analysis rules for reversing Dynamic Loads
BPVC, Section III, Division 1, Organization of Section III
BPV III Table NB-3681(a)-1, Stress Indices for straight pipe: Proposed Revision to Table NB3681(a)-1
Clarification of Sm, Sh and Sy Temperature in NB/NC/ND-3650
Pipe Bends in NB/NC/ND-3642.1
Clarification of ME Definition in NB/NC/ND
BPV Section III, DIvision 1, NB-3226. Part 1: The intent inquiry with proposed reply. Part 2. The
proposed revision to NB-3226.
**INTENT INTERPRETATION** ASME BPVC, Section III, Division 1, NB-2126.1(e) Fin Tube
visual examination
Relocate reference of applicable Edition for PTC-25 from NB/NC/ND/NE-7000 to Table NCA7100-2, Update PTC-25 reference year
7/7/2015 8:05 AM
2015 ASME Boiler and Pressure Vessel Code (BPVC) | American Society...
6 of 17
http://www.techstreet.com/pages/boiler_code_2015_changes.html
7/7/2015 8:05 AM
2015 ASME Boiler and Pressure Vessel Code (BPVC) | American Society...
7 of 17
http://www.techstreet.com/pages/boiler_code_2015_changes.html
7/7/2015 8:05 AM
2015 ASME Boiler and Pressure Vessel Code (BPVC) | American Society...
8 of 17
http://www.techstreet.com/pages/boiler_code_2015_changes.html
ASME BPV III, Section III changes to implement revised Bolting Sm values
BPV III Incorporation of acceptance of ASNT SNT-TC-1A 2011 into Section III.
BPVC, Section III, Division 1, Organization ofSection III
Replace weight limts in WB-3700 and also revise WC-3700 to reflect energy limited definition
Section III, Division 3, WB-3000
ASME BPV Code, Section III, Division 3
Editorial corrections to ND-2360, NE-4122, NG-3222, and WC-2150.
BPV Code, Section III, Division 3, Subsection WC-3000
7/7/2015 8:05 AM
2015 ASME Boiler and Pressure Vessel Code (BPVC) | American Society...
9 of 17
http://www.techstreet.com/pages/boiler_code_2015_changes.html
7/7/2015 8:05 AM
2015 ASME Boiler and Pressure Vessel Code (BPVC) | American Society...
10 of 17
http://www.techstreet.com/pages/boiler_code_2015_changes.html
BPV IV Section IV - Incorporation of CC 2583 and Annulment six months after publication
BPV IV Section IV - Incorporation of CC 2614 and Annulment six months after publication of
incorporation
Section IV - Code Case 2800 Incorporation
BPV IV Section IV - Incorporation of Case 2615 and Annulment six months after incorporation
Section IV - Revision to Table HF-300.2 and HF-300.2M
Section IV - HG-403 Heating Surface
Section IV - HG-307.5 Electric Immersion
Heating Element Support Plates - Intent Interp + Code Revision
Section IV - HG-530 Marking of Boilers
Section IV - Revision to HF-201
Section IV - Proposed Revision to New Nonmandatory Appendix A100
Section IV - Incorporation of Code Case 2654-1
BPV IV - Traceability of Multi-page Data Report Forms
BPV IV - Mandatory Appendix 2
Section IV - REVISION - Deletion of specific references to II-D, Appendix A, Metallurgical
Phenomena - HF-207
BPV IV HLW-431.6 Internally Threaded Fittings Attached by Resistance Welding
7/7/2015 8:05 AM
2015 ASME Boiler and Pressure Vessel Code (BPVC) | American Society...
11 of 17
http://www.techstreet.com/pages/boiler_code_2015_changes.html
Section V: Review of ASTM A435 / A435M - 90(2012) Standard Specification for Straight-Beam
Ultrasonic Examination of Steel Plates for Adoption as SA-435
V Section V: Article 4; Mandatory Appendices VII and VIII
Section V: Review of ASTM A745 / A745M - 12 Standard Practice for Ultrasonic Examination of
Austenitic Steel Forgings for Adoption as SA 745
Section V: Review ASTM D129 - 11 Standard Test Method for Sulfur in Petroleum Products (General
High Pressure Decomposition Device Method) for Adoption as SD 129
Section V: Review ASTM D516 - 11 Standard Test Method for Sulfate Ion in Water for Adoption as SD
516
Section V: Review ASTM D808 11 Standard Test Method for Chlorine in New and Used Petroleum
Products (High Pressure Decomposition Device Method) for Adoption as SD 808
Section V: Review ASTM E165 / E165M - 12 Standard Practice for Liquid Penetrant Examination for
General Industry for Adoption as SE 165
Section V: Review ASTM E2096 / E2096M - 10 Standard Practice for In Situ Examination of
Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing for Adoption as SE2096
Section V: Mandatory Appendix to Article 4 for the Examination of HDPE
13-1355
Section V: Review of ASTM E650 / E650M - 12 Standard Guide for Mounting Piezoelectric Acoustic
Emission Sensors for Adoption as SE 650
Section V: Article 6; Documentation Requirements
Section V: Article 7; Documentation Requirements
Section V: Review the Use of the Term "Manufacturer" in Section V
Section V: Article 4; Revision to Mandatory Appendix II-440
Section V: Consistent Use of the Term "Through Wall" In All Articles of Section V
Section V: Review of ASTM E2491 - 13 Standard Guide for Evaluating Performance Characteristics of
Phased-Array Ultrasonic Testing Instruments and Systems
V Section V: Revision of Article 2; Mandatory Appendix VI 14-6
Section V: Revision of Article 12; Change to T-1224.1
Section V: Image Brightness Variation Requirements
Section V: Revision of T-224
Section V: Article 4, IX-435.4; Weld Joint Configuration and TOFD
Section V: Review of ASTM A577 / A577M - 90(2012) Standard Specification for Ultrasonic
Angle-Beam Examination of Steel Plates for Adoption as SA-577
Section V: Review of ASTM A578 / A578M - 07 (2012 Standard Specification for Straight-Beam
Ultrasonic Examination of Rolled Steel Plates for Special Applications for Adoption as SA-578
Section V: Review of ASTM A609 / A609M - 12 Standard Practice for Castings, Carbon, Low-Alloy,
and artensitic Stainless Steel, Ultrasonic Examination Thereof for Adoption as SA-609
Section V: Revision of Article 2, Mandatory Appendix V, Definition of "Radiograph"
Section V: Article 8 Mandatory Appendix; VIII-810 Revision of the Term Nonmagnetic to
Nonferromagnetic.
Section V: Article 13; Revise T-1311
Section V: Revision of Article 2, Appendices VIII & IX; Paragraphs VIII-287 and IX-287 on Measuring
Scale
Section V: Article 4, Figure T-434.3-1; Revision to the General Notes
7/7/2015 8:05 AM
2015 ASME Boiler and Pressure Vessel Code (BPVC) | American Society...
12 of 17
http://www.techstreet.com/pages/boiler_code_2015_changes.html
7/7/2015 8:05 AM
2015 ASME Boiler and Pressure Vessel Code (BPVC) | American Society...
13 of 17
http://www.techstreet.com/pages/boiler_code_2015_changes.html
23
Section VIII Divisions 1 and 2; Incorporation of Code Case 2270
Section VIII, Divisions 1 and 2; Table UCS-23 - Withdrawal of Specification SA-202
Section VIII, Divisions 1 & 2; Appendix 26 & 4.19: Shear Stress in Bellows Under Torsion Load
Section VIII, Division 1; UIG-3 - Terminology
Section VIII, Division 1; Appendix 39
Section VIII, Division 1; Part UIG form CMQ
Section VIII, Division 1; UIG-116(b)
Section VIII, Division 1; Part UIG for CCQ and CPQ.
Section VIII, Division 1; Table UHA-32-2, General Note (a)
Section VIII, Division 1; UG-37(a) - Use of Welded Product Form Specifications
Section VIII, Division 1; Fig. UG-118 ); Division 2, Paragraph 2-F.1(h),Fig. 2.F.1; Division 3, Fig. KS132
Section VIII, Divisions 1 and 2; References to SC IX, Part QG
Section VIII, Division 1; UG-11(d)(5)
Section VIII, Division 1; App 26 and Division 2, Part 4.19, Maximum Design Temperature
Section VIII, Divisions 1 and 2; Operating Load Cases
Section VIII, Division 1; UG-45 and UG-53(j)
Section VIII, Division 1; Caution Note in Figure L-11-3.
Section VIII, Division 1; Table UHA-23 - Addition of SA-403 N08904
Section VIII, Divisions 1 and 2; Incorporate S31266
Section VIII, Division 1; NDE Procedure Qualification Requirements
Section VIII, Division 1, 2013 Edition; Editorial Corrections to UG-11, UW-5, UW-18, and UCS-66
Section VIII, Division 1; Appendix 26: Yield Strength Values
Section VIII, Division 1; U-2(a)(5)
Section VIII, Division 1; Editorial Errors
Section VIII, Divisions 1 and 2; UHX-19.3.2 and 4.18.14.3 Manufacturer's Data Reports
BPVC-VIII-2 2015 Edition Items
Section VIII, Divisions1 and 2; Incorporation of Code Case 2637 for UNS S32205 Material
Section VIII, Division 2; Incorporation of Code Case 2562
Section VIII, Division 1; UG-40(e) Section VIII, Division 2, 4.5.2
Section VIII, Division 1; UW-3(a) and UW-11(a) and Section VIII, Division 2; Table 4.2.1 and Table
7.2
Section VIII, Divisions 1 and 2; PWHT Exemptions in Section VIII - NPS 4 Limitation
Section VIII, Division 2; Para. 4.3.11.3
Section VIII, Division 2; Table 7.2
Section VIII, Division 2; Clad Tubesheets
Section VIII, Division 2; Paragraph 3.11.2.2 (b) Section VIII, Division 1; Paragraph UCS-66(f)
Section VIII, Division 1: UG-37(g) and (h); Section VIII, Division 2: 4.5.3.2(d)
Section VIII, Division 2; Part 5 Local Failure Check
Section VIII, Division 1: UW-27(a); & Section VIII, Division 2: 6.2.1.1 Hybrid Welding Processes
Section VIII, Divisions 1 and 2; Incorporation of EN 10028-2:2003 Grade 10CrMo9-10
Section VIII, Division 2; Review Environmental Factor for Structural Stress Method in Division 2
Section VIII, Division 1; UHT-6(b)(2), Division 2, 3.11.3.3(c)
Section VIII, Division 1; Revise Part UHX, Appendix 5 and Appendix 26 to comply with revisions to
U-2(g) and consistency with Division 2. Section VIII, Division 2; Revise paragraphs 4.18, 4.19 and 4.20
for consistency with the Division 1 changes relating to U-2(g).
Section VIII, Division 1; Intent interpretation with revision to UCL-11; and revision to VIII-2; Part
3.3.6.2.
Section VIII, Division 2: Incorporate Code Case 2728 for Use of SB-564 Nickel-Iron-ChromiumMolybdenum-Copper Alloy UNS N08825 Forgings
7/7/2015 8:05 AM
2015 ASME Boiler and Pressure Vessel Code (BPVC) | American Society...
14 of 17
http://www.techstreet.com/pages/boiler_code_2015_changes.html
7/7/2015 8:05 AM
2015 ASME Boiler and Pressure Vessel Code (BPVC) | American Society...
15 of 17
http://www.techstreet.com/pages/boiler_code_2015_changes.html
7/7/2015 8:05 AM
2015 ASME Boiler and Pressure Vessel Code (BPVC) | American Society...
16 of 17
http://www.techstreet.com/pages/boiler_code_2015_changes.html
Revision of QG-106.2
BPV IX 13-590 SC IX; Appendix K
Forms QW-482 through QW-485
Table QW/QB-422 and Appendix D - Withdrawal of Specification SA-202
Part QF - Electrofusing
QF-464 HSTIT Specimen
Assignment of a P-No. for UNS N06025
Request from B31.3: P-number assignment for A928
F-number assignment for new SFA 5.10 AWS Classifications
Definition of "bare electrode"
Appendix K
Editorial Markups of SC IX
Addition of A694 Grades F48 and F50
Nonmandatory Appendix on Qualification of Welders under ISO rules
Bend testing of Aluminum
Review of AWS B2.2 E4 WD-1
Definition of Special Positions
Addition of S31266 Superaustenitic Stainless Steel
Incorporation of Code Case 2648 (UNS N10362)
QW-171 - Impact Testing
Forms QF-482 & QF-483
QW-403.3
QW-409.1
QW/QB-422 and Appendix D inclusion of A/SA-403 WP S31726
Variable Definitions Revisions
7/7/2015 8:05 AM
2015 ASME Boiler and Pressure Vessel Code (BPVC) | American Society...
17 of 17
http://www.techstreet.com/pages/boiler_code_2015_changes.html
Extent of Surface Examination Requirements for Table IWB 2500 1, Category B-O, Item No. B14.10,
Control Rod Drive (CRD) Housing Welds
BPV XI SG ES IWA-9000 Glossary Definition for "Analytical Evaluation"
Intent Interpretation and Code Change to IWF-1300(e).
PQ&SV&ECE Visual Examination requirements of IWA-2210 of the 2013 Edition and of Code Case
N-823
Acceptance of through-wall or through-weld leakage in Class 1 components.
Pressure Test Requirements for Class 2 & 3 Open End Systems
Hold Time Requirements for Class 2 or Class 3 Segments of a Pressure Test when performed in
conjunction with the Class 1 Test.
Revision to Underwater Welding Requirements - Code Case N-516-3 and IWA-4660
Intent Inquiry and Proposed Code Changes to Clarify Support Exemptions in IWF-1230.
PRA-Related Revisions to Appendix R
Section XI, Mandatory Appendix III - Ultrasonic Examination of Vessel and Piping Welds
Incorporate Code Case N-805 into Section XI
Clarify Class 2 Nozzle to Vessel Volumetric Examination Requirements
Clarify open-ended IWC-1221(d) and IWC-1222(d) exemption for normally dry lines.
Change to Supplement 10 (DM welds) to clarify single side qualification rules for DM welds with no
austenitic base material Section XI, Division 1
Cable Length Tolerance added to VIII-2100 for Performance Demonstration.
Change to Appendix VIII-3000 Full Scale Test Piece Identification Section XI, Division 1
Supplement 14 Circumferential Flaw Depth Sizing Requirements. Section XI, Division 1
General Requirements Table IWA-1600-1 Reference Update
Add figures to Figure IWB-2500-12 to address bolting with integral heads in addition to studs.
Examination Requirements for Reduced-Shank Bolting
Add figures to Figure IWC-2500-6 to address integral head bolting in addition to studs
Adoption of ANSI/ASNT CP-189, 2006 Edition
IWA-2300 References
BPV XI New Code Case to Replace N-629 and Revision to Appendix A, A-4200 for Kia Fracture
Toughness Determination
7/7/2015 8:05 AM