Beruflich Dokumente
Kultur Dokumente
Version 22/07/2010
SikaPlast ORC
Mid-range Water Reducing Concrete Admixture
Description
SikaPlast ORC is a newly developed admixture for concrete with midrange reducing effect. It is concentrated solution based on Synthetic Polymer
Construction
Uses
Advantages
Application
Dosage
Recommend dosage 200 - 600 CC. per 100 kg. of cement or cementitious
weight. Actual dosage depends on requirements and should be established from laboratory trials.
Mixing
Add the correct amount of SikaPlast ORC at the concrete plant. Addition should be by automatic dispenser into the water line at the batching
plant. Do not add directly on to the dry sand or cement.
Important indication
Technical Data
Colour
Brown
Specific Gravity
PH Value
Storage conditions
Shelf Life
Packaging
Safety Instructions
Safety precautions
Wear goggles and rubber gloves. In contact with skin wash with soap
water. In contact with eyes or mucous membrane flush immediately with
plenty of warm water and seek medical attention without delay.
Ecology
Toxicity
Transport
Non-hazardous.
The information, and, in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith based on Sikas current
knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sikas ecommendations. In
practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular
purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or
from any other advice offered. The user of the product must test the products suitability for the intended application and purpose. Sika reserves the right to change
the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery.
Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.