Beruflich Dokumente
Kultur Dokumente
Nokia Networks Oy
The information in this document is subject to change without notice and describes only
the product defined in the introduction of this documentation. This document is intended
for the use of Nokia's customers only for the purposes of the agreement under which the
document is submitted, and no part of it may be reproduced or transmitted in any form or
means without the prior written permission of Nokia. The document has been prepared to
be used by professional and properly trained personnel, and the customer assumes full
responsibility when using it. Nokia welcomes customer comments as part of the process of
continuous development and improvement of the documentation.
The information or statements given in this document concerning the suitability, capacity,
or performance of the mentioned hardware or software products cannot be considered
binding but shall be defined in the agreement made between Nokia and the customer.
However, Nokia has made all reasonable efforts to ensure that the instructions contained
in the document are adequate and free of material errors and omissions. Nokia will, if
necessary, explain issues which may not be covered by the document.
Nokia's liability for any errors in the document is limited to the documentary correction of
errors. NOKIA WILL NOT BE RESPONSIBLE IN ANY EVENT FOR ERRORS IN THIS DOCUMENT
OR FOR ANY DAMAGES, INCIDENTAL OR CONSEQUENTIAL (INCLUDING MONETARY
LOSSES), that might arise from the use of this document or the information in it.
This document and the product it describes are considered protected by copyright
according to the applicable laws.
NOKIA logo is a registered trademark of Nokia Corporation.
Other product names mentioned in this document may be trademarks of their respective
companies, and they are mentioned for identification purposes only.
Copyright Nokia Oyj 2006. All rights reserved.
Nokia Networks Oy
Contents
Contents
1.
Product Description
2.
Module Objectives
3.
Course Programme
4.
Learning Environment
5.
Contents list
Nokia Networks Oy
Product Description
Product Code
Product name
Category
Intermediate
Target Group
Objectives
Duration
5.00 day /s
Prerequisite Courses
Underpinning knowledge & skills Good knowledge of 3G radio access networks and ATM technology.
Operating knowledge of Nokia IPA 2800 Platform.
Modules
Nokia Networks Oy
Nokia Networks Oy
Module Objectives
Module Objectives
Physical Interface Configuration
After completing this module, the participant should be able to:
Theory/ Practical:
Configure a PDH interface and an SDH interface.
-
Practical:
Configure CCS7 signalling in RNC
Nokia Networks Oy
Module Objectives
Practical:
Configure Routing and Digit Analysis in the RNC
IP Connection configuration for RNC
After completing this module, the participant should be able to:
Theory:
Explain the use of IP over ATM for user data in Iu-ps interfaces
and IP over ATM management in Iub interfaces.
-
Practical:
Implement IP connection configuration in RNC
Radio Network Integration and Expansion
After completing this module, the participant should be able to:
Theory:
Explain the procedure to set up an Iub by using NEMU.
-
Practical:
Create RNW database objects in RNC
Nokia Networks Oy
Module Objectives
Practical:
Interrogate all RNC Interfaces configuration
Nokia Networks Oy
Course Programme
Course Program
Programme
day 1
Morning
Physical Int Con
day 2
day 3
day 4
day 5
Nokia Networks Oy
Afternoon
Physical Int Con
ATM res man
Sig in ATM NW
Rout & Dig An
RNW Int & Exp
RNC Integration
Course Programme
Learning Environment
Learning
Environment
Nokia Networks Oy
- IPA2800
10
Course Programme
Contents list
Title
Document Numbers
6-273544 6-273545
CTXX5596en
CTXX5595en
6-273547 6-273548
CTXX5595en
6-273549
DN99557885
6-273551 6-273552
6-273554
6-273556
6-66105
6-273559 6-273560
Nokia Networks Oy
11