Beruflich Dokumente
Kultur Dokumente
Components
GOCO Software
Interface
Sample Output
TS-GO.01/28/4/03
Goyen Controls Co Pty Ltd reserves the right to change product designs and specifications without notice.
Interface
TS-BES.01/28/4/03
Goyen Controls Co Pty Ltd reserves the right to change product designs and specifications without notice.
Technical Specification
VN-45-PC-50
VN-25-PC-50
Description
Installation
For best performance, H=( Filter - 48)/0.353 (mm) or H=( Filter - 1.88)/0.353
(inches). Prepare 22mm (0.866") hole in the blowtube for VN-20PC-50 and
Prepare 26mm (1.023") hole in the blowtube for VN-25PC-50.
Filter
Suitable for
1" and 1.5" pipe diameters in reverse
pulse jet filter cleaning applications and
its variations including bag filters and
cartridge filters. Plastic nozzles are not
suitable for high ambient temperature
applications above 80C (176F).
Model
VN25PC-50
VN45PC-50
A
110 mm [4.33"]
126 mm [4.97"]
B
76mm [3.00"]
84 mm [3.29"]
33mm [1.32"]
48mm [1.90"]
VN-25-PC-50
1" (Schedule 40)
33 (1.32)
-40 (-40) to 80 (176)
PA-6
0.060 (0.13)
22.0 (0.866)
VN-45-PC-50
1.5" (Schedule 40)
48 (1.90)
-40 (-40) to 80 (176)
PA-6
0.065 (0.14)
26.0 (1.023)
Nozzle sizes can be optimised using Goyen's GOCO software. Contact your local
Goyen representative.
TS-PLC.01/28/4/03
Goyen Controls Co Pty Ltd reserves the right to change product designs and specifications without notice.
Technical Specification
Description
Installation
For best performance, H=( Filter - 48)/0.353 (mm) or H=( Filter - 1.88)/0.353
(inches). Nozzles must be drilled to appropriate orifice size before installation.
Filter
Suitable for
3/4" and 1" pipe diameters in reverse
pulse jet filter cleaning applications and
its variations including bag filters and
cartridge filters.
Plastic nozzles are not suitable for high
ambient temperature applications
above 80C (176F). These nozzles are
designed to be screwed directly into
the threaded outlet of a 'T' series dust
collector valve, or into threaded sockets
welded to blowtubes.
Connection Size
mm (inches)
20 (3/4)
20 (3/4)
20 (3/4)
20 (3/4)
25 (1)
25 (1)
25 (1)
25 (1)
Thread Type
NPT
R
NPT
R
NPT
R
NPT
R
Barrel Length
mm (inches)
56 (2.2)
56 (2.2)
104 (4.1)
104 (4.1)
56 (2.2)
56 (2.2)
104 (4.1)
104 (4.1)
Unit Mass
Kg (lbs)
0.040 (0.09)
0.040 (0.09)
0.065 (0.14)
0.065 (0.14)
0.040 (0.09)
0.040 (0.09)
0.065 (0.14)
0.065 (0.14)
Material
PA-6
PA-6
PA-6
PA-6
PA-6
PA-6
PA-6
PA-6
Temperature Rating
C (F)
-40(-40) to 80 (176)
-40(-40) to 80 (176)
-40(-40) to 80 (176)
-40(-40) to 80 (176)
-40(-40) to 80 (176)
-40(-40) to 80 (176)
-40(-40) to 80 (176)
-40(-40) to 80 (176)
Nozzle sizes can be optimised using Goyen's GOCO software. Contact your local Goyen representative.
TS-PLC.01/28/4/03
Goyen Controls Co Pty Ltd reserves the right to change product designs and specifications without notice.
Technical Specification
VNA25C-50
VNA25C-100
VNA45C-50
VNA45C-100
AL25-B, AL25-BD#,
AL45-B, AL45-BD#,
Description
Installation
Suitable for
1" and 1.5" pipe diameters in reverse
pulse jet filter cleaning applications and
its variations including bag filters,
cartridge filters, ceramic filters, and
sintered metal fibre filters.
Filter
Mass Kg (lbs)
0.175 (0.366)
0.160 (0.353)
0.055 (0.121)
VNA25C-50
To suit 1" schedule 40 pipe.
REG-#
Item
VNA25C-100
VNA45C-100
REG-#
Mass Kg (lbs)
0.220 (0.485)
0.205 (0.452)
0.020 (0.044)
VNA45C-50
To suit 1.5" schedule 40 pipe.
TS-VNA.01/28/4/03
Goyen Controls Co Pty Ltd reserves the right to change product designs and specifications without notice.
VNA25C-100
To suit 1" schedule 40 pipe.
VNA45C-100
To suit 1.5" schedule 40 pipe.
Description
Material
VNA25C-50
VNA25C-100
VNA45C-50
VNA45C-100
Code
Description
Material
AL25-B
Diecast aluminium
Temperature Range
C (F)
-60 (-76) to 400 (752)
AL25-BD#
Diecast aluminium
Diecast aluminium
Diecast aluminium
Nozzle Inserts
AL45-B
AL45-BD#
REG-#
To order specify nozzle and nozzle insert codes separately. For example:
VNA25C-50 and REG-14 for a short nozzle to suit a 1" pipe with a 14mm plastic insert.
VNA45C-100 and AL45-BD10 for a long nozzle to suit a 1.5" pipe with a 10mm aluminium insert.
Nozzle sizes can be optimised using Goyen's GOCO software. Contact your local Goyen representative.
TS-VNA.01/28/4/03
Goyen Controls Co Pty Ltd reserves the right to change product designs and specifications without notice.
Technical Specification
Description
Installation
Insert
Nozzle
Filter
Suitable for
2", 2.5", 3" and 4" schedule 40 pipe
diameters as used in reverse pulse jet
filter cleaning applications and its
variations including bag filters,
cartridge filters, ceramic filters, and
sintered metal fibre filters.
TS-SSN.01/28/4/03
TS-Q.01/28/4/03
Goyen Controls Co Pty Ltd reserves the right to change product designs and specifications without notice.
Mass Kg (lbs)
0.115 (0.254)
0.115 (0.254)
0.115 (0.254)
0.115 (0.254)
Item
VNA50I-100
VNA62I-100
VNA76I-100
VNA102I-100
Mass Kg (lbs)
0.205 (0.452)
0.205 (0.452)
0.205 (0.452)
0.205 (0.452)
Order Code
VNA50I-50
VNA62I-50
VNA76I-50
VNA102I-50
Y mm (inches)
88 (3.46)
94 (3.71)
102 (4.03)
115 (4.53)
Order Code
VNA50I-100
VNA62I-100
VNA76I-100
VNA102I-100
Y mm (inches)
138 (5.43)
145 (5.68)
152 (6.00)
165 (6.50)
Description
Material
VNA50I-50
VNA62I-50
VNA76I-50
VNA102I-50
VNA50I-100
VNA62I-100
VNA76I-100
Schedule 40
Pipe (inches)
2
2.5
3
4
2
2.5
3
Short barrel
Short barrel
Short barrel
Short barrel
Long barrel
Long barrel
Long barrel
Diecast
Diecast
Diecast
Diecast
Diecast
Diecast
Diecast
(lockring)
(lockring)
(lockring)
(lockring)
(lockring)
(lockring)
(lockring)
Temperature Range
C (F)
-60 (-76) - 400 (752)
-60 (-76) - 400 (752)
-60 (-76) - 400 (752)
-60 (-76) - 400 (752)
-60 (-76) - 400 (752)
-60 (-76) - 400 (752)
-60 (-76) - 400 (752)
VNA102I-100
Long barrel
aluminium
aluminium
aluminium
aluminium
aluminium
aluminium
aluminium
&
&
&
&
&
&
&
galvanised
galvanised
galvanised
galvanised
galvanised
galvanised
galvanised
steel
steel
steel
steel
steel
steel
steel
Note that assemblies include nozzle, pipe adaptor, nozzle insert and lockring. Nozzle inserts must be drilled to required orifice size.
Nozzle sizes can be optimised using Goyen's GOCO software. Contact your local Goyen representative
TS-SSN.01/28/4/03
Goyen Controls Co Pty Ltd reserves the right to change product designs and specifications without notice.
Technical Specification
CC 100
CC 150
Description
CC 200
Performance
Without cone
Av. pressure=4.5 Wg
Suitable for
Cartridge and pleated filter elements
used in reverse pulse jet dust
collectors. Suitable for filter elements
with internal diameter of 60mm (2.4")
or larger. The Cartridge Cleaning Cone
may be assembled to any of the Goyen
range of GOCO nozzles.
Not intended for use in gas turbine
applications.
As illustrated above for a typical system, the Cartridge Cleaning Cone ensures that
the developed overpressure is even along the entire length of the filter element. The
average developed pressure is nearly equal to the system without.
Note that in this case, the system without the attachment is unable to overcome the
normal filter differential pressure near the top of the filter. Massive over pressure is
developed at the bottom of the filter. The effects of this include blinding of significant
filter area and damage to the filter membrane - poor filtration performance and
reduced filter life.
Graphic shown is for internal 240mm, external 350mm cartridge filter 600mm
long operating at a pressure drop of 4" Wg. System pulse pressure is 413kPa
(60psi). No venturi used on cartridge element. CC200 used.
Nozzle sizes can be optimised using Goyen's GOCO software. Contact your
local Goyen representative.
Installation
When installing into baghouse, the end of the cone should lie between 30 and 80mm (1.13" and 3.14") from the filter opening.
10
TS-CC.01/28/4/03
Goyen Controls Co Pty Ltd reserves the right to change product designs and specifications without notice.
CC100
mm (inches)
33 (1.30)
CC150
mm (inches)
77 (3.03)
CC200
mm (inches)
102 (4.02)
Material
(cone and clip)
30% glass filled PA-6
30% glass filled PA-6
30% glass filled PA-6
Unit Mass
Kg (lbs)
0.03 (0.066)
0.07 (0.154)
0.13 (0.287)
Temperature Range
C (F)
-40 (-40) to 80 (176)
-40 (-40) to 80 (176)
-40 (-40) to 80 (176)
TS-CC.01/28/4/03
Goyen Controls Co Pty Ltd reserves the right to change product designs and specifications without notice.
11
Technical Specification
Bulkhead Connectors
BHD
BHSS
BHDD
Description
Goyen produces a range of aluminium
diecast bulkhead connectors designed
to ease the installation of cleaning
systems onto dust collectors. These
components eliminate the requirement
for welding and allow easy removal of
cleaning systems and blowtubes for
maintenance purposes.
Suitable for
Most reverse pulse jet dust collector
installations and their variations
including bag filters, cartridge filters,
envelope filters, ceramic filters, and
sintered metal fibre filters.
Installation
Model
BH20D
BH25D
BH40D
BH20DD
BH25DD
BH40DD
BH25SS
BH45SS
A mm (inches)
45 - 51 (1.75 - 2.0)
56 - 62 (2.2 - 2.4)
72 - 78 (2.8 - 3.1)
45 - 51 (1.75 - 2.0)
56 - 62 (2.2 - 2.4)
72 - 78 (2.8 - 3.1)
56 - 62 (2.2 - 2.4)
72 - 78 (2.8 - 3.1)
B mm (inches)
97 (3.81)
118 (4.63)
157 (6.19)
97 (3.81)
118 (4.63)
157 (6.19)
118 (4.63)
157 (6.19)
Mating Valve
20DD
25DD
45DD
20T
25T
45T
20FS
25FS
45FS
C mm (inches)
22 (0.86)
30 (1.18)
40 (1.57)
7 (0.28)
5 (0.20)
16 (0.63)
34 (1.34)
67 (2.63)
88 (3.46)
E mm (inches)
105 (4.13)
121 (4.76)
155 (6.10)
NA
NA
NA
66 (2.60)
82 (3.23)
96 (3.78)
12
TS-BH..01/28/4/03
Goyen Controls Co Pty Ltd reserves the right to change product designs and specifications without notice.
L - length
mm (inches)
51 (2.01)
55 (2.17)
72 (2.83)
52 (2.05)
55 (2.17)
72 (2.83)
52 (2.05)
51 (2.01)
BH20D
BH25D
BH40D
BH20DD
BH25DD
BH40DD
BH25SS
BH45SS
D - insertion depth
mm (inches)
34 (1.34)
30 (1.18)
48 (1.89)
52 (2.05)
58 (2.28)
Not Applicable
Not Applicable
Not Applicable
Style
Material
Temperature Range
C (F)
-40 (-40) to 80 (176)
-29(-20.2) to 232(449.6)
-40 (-40) to 80 (176)
-29(-20.2) to 232(449.6)
-40 (-40) to 80 (176)
-29(-20.2) to 232(449.6)
-40 (-40) to 80 (176)
-29(-20.2) to 232(449.6)
-40 (-40) to 80 (176)
-29(-20.2) to 232(449.6)
-40 (-40) to 80 (176)
-29(-20.2) to 232(449.6)
-40 (-40) to 80 (176)
-29(-20.2) to 232(449.6)
-29(-20.2) to 232(449.6)
-40 (-40) to 80 (176)
-29(-20.2) to 232(449.6)
-29(-20.2) to 232(449.6)
Unit Mass
Kg (lbs)
0.27 (0.60)
0.27 (0.60)
0.40 (0.88)
0.40 (0.88)
0.76 (1.68)
0.76 (1.68)
0.41 (0.90)
0.41 (0.90)
0.66 (1.46)
0.66 (1.46)
1.16 (2.56)
1.16 (2.56)
0.53 (1.17)
0.53 (1.17)
1.5* (3.4)*
0.85 (1.87)
0.85 (1.87)
2.5* (5.4)*
TS-BH.01/28/4/03
Goyen Controls Co Pty Ltd reserves the right to change product designs and specifications without notice.
13
Technical Specification
Venturis
6 Venturi
5 Venturi
Description
Installation
Model
Suitable for
5" and 6" diameter bag filters in most
reverse pulse jet dust collector
installations.
VC-5
VC-6
mm (inches)
GOCO Nozzle
mm inches)
100 (3.93)
160 (6.29)
70 (2.75)
15 (0.53)
14
Height (C)
mm (inches)
153 (6.02)
251 (9.88)
190 (7.48)
295 (11.61)
Material
Spun
Spun
Spun
Spun
Al
Al
Al
Al
1200
1200
1200
1200
Temperature Rating
C (F)
-40 (-40) to 400 (752)
-40 (-40) to 400 (752)
-40 (-40) to 400 (752)
-40 (-40) to 400 (752)
Mass
Kg (lbs)
0.15 (0.33)
0.24 (0.53)
0.18 (0.39)
0.32 (0.69)
TS-VEN.01/28/4/03
Goyen Controls Co Pty Ltd reserves the right to change product designs and specifications without notice.
Technical Specification
Description
Installation
Suitable for
Most reverse pulse jet dust collector
installations and their variations
including bag filters, cartridge filters,
envelope filters, ceramic filters, and
sintered metal fibre filters.
Style
690591
690591-2
690125
690125-2
690093
690093-2
690593
690593-2
690129
690129-2
690094
690094-2
Nom. Pipe OD
Schedule 40
"
"
1"
1"
1 "
1 "
"
"
1"
1"
1 "
1 "
Material
EPDM
Viton
EPDM
Viton
EPDM
Viton
EPDM
Viton
EPDM
Viton
EPDM
Viton
Temperature Range
C (F)
-40(-40) to 82(179.6)
-29(-20.2) to 232(449.6)
-40(-40) to 82(179.6)
-29(-20.2) to 232(449.6)
-40(-40) to 82(179.6)
-29(-20.2) to 232(449.6)
-40(-40) to 82(179.6)
-29(-20.2) to 232(449.6)
-40(-40) to 82(179.6)
-29(-20.2) to 232(449.6)
-40(-40) to 82(179.6)
-29(-20.2) to 232(449.6)
Unit Mass
Kg (lbs)
0.005
0.005
0.015
0.015
0.025
0.025
0.005
0.005
0.015
0.015
0.025
0.025
TS-BHSC.01/28/4/03
Goyen Controls Co Pty Ltd reserves the right to change product designs and specifications without notice.
15
Australia
Goyen Controls Co Pty Ltd
268 Milperra Road
Milperra
NSW 2214
Telephone:
Facsimile:
61 2 9792 0201
61 2 9771 5380
Queensland
Telephone:
Facsimile:
61 7 3260 2161
61 7 3260 2165
South Australia
Telephone:
61 2 9792 0201
Facsimile:
61 2 9771 5380
Victoria
Telephone:
Facsimile:
61 3 9874 6655
61 3 9874 1846
Western Australia
Telephone:
61 8 9302 8800
Facsimile:
61 8 9302 6500
Asia
Goyen Controls Co Pty Ltd
Shanghai Representative Office
2521 Zhao Feng World Trade Building
369 Jiang Su Road Shanghai 200050 CHINA
Telephone:
86 21 5239 8810
Facsimile:
86 21 5239 8812
USA
Goyen Valve Corporation
1195 Airport Road
Lakewood
New Jersey 08701 USA
Telephone:
Facsimile:
www.cleanairsystems.com
49 6432 1001/1002
49 6432 63810
Mecair S.r.l
Via per Cinisello 97
1-20054 Nova Milanese
Milano
ITALY
Telephone:
39 0362 3751
Facsimile:
39 0362 367 279
CAS Cleaning
Rev1 - 4/03
Europe