Beruflich Dokumente
Kultur Dokumente
WWW.POLYMER-BOOKS.COM
Contents:
01
02
2011-2012 Titles
10
Materials
11
18
20
21
23
Pharmaceutical
27
32
Materials
33
46
52
57
61
Pharmaceutical
65
Research Journals
66
International Representation
69
Publicationscatalogue2013
Hello...
:1
New and
Forthcoming
Titles
2:
Author
Rani Joseph
The book begins with a short history of natural rubber latex, formation in the tree and the tapping, storage and conversion of
latex to marketable forms. It discusses preservation and concentration of natural rubber latex and the most widely used latex
compounding ingredients. Dipping and casting techniques are discussed, as well as the technology related to foams, threads and
adhesives. In addition, the book offers an introduction to important lattices such as styrene-co-butadiene rubber, acrylonitrile-cobutadiene, polychloroprene, polyvinyl chloride, and so on. Fully illustrated throughout, with photographs from actual production
sites, this practical guide is ideal for academics, research and development managers, students of polymer technology and all
those working in the latex industry.
PUBLICATION DATE: JANUARY 2013
FORMAT: PAPERBACK
ISBN: 9781847355669
GB: 55
US: $90
EU: 70
FORMAT: eBOOK
ISBN: 9781847355676
GB: 55
US: $90
EU: 70
Author
T. R. Crompton
Each technique is discussed in detail and examples of the use of each technique are also given. Each chapter has an extensive
list of references so that the reader can follow up topics of interest.
This book will be a useful reference for those who already use any of these thermal methods but will also be of interest to
undergraduates and those who are just starting to use these techniques.
PUBLICATION DATE: JANUARY 2013
FORMAT: HARDBACK
ISBN: 9781847356611
GB: 125
US: $200
EU: 155
FORMAT: PAPERBACK
ISBN: 9781847356628
GB: 95
US: $155
EU: 120
FORMAT: eBOOK
ISBN: 9781847356635
GB: 125
US: $200
EU: 155
Author
Valerio Voliani
In this Update the reader can find in a single volume the methods used most often for the synthesis and coating of gold
nanoparticles (spheres, cages, cubes, rods), the links between optical features and geometries of gold nanoparticles, and the
novel applications in nanomedicine of gold nanoparticles determined by their geometry. One of the main objectives of this Update
is to provide, a readily comprehensible connection in all the chapters between the geometry of gold nanoparticles and their final
applications. Another target of this book is to provide information about efficient processes for the synthesis and the coating of
gold nanoparticles, all of which have been directly tested by the author.
This Update offers comprehensive information on the whole topic from the synthesis of the gold nanoparticles to their medical
applications; this is accompanied by a complete and recent bibliography, in order to give to the readers the opportunity to
research further the topics addressed in the book. In this way, students and researchers from academia and industry can have a
complete picture of gold nanostructures, physicians and biologists can develop ideas and applications for the new nano-tools,
and chemists can have a general guide to the synthesis of gold nanoparticles. This is a state-of-the-art guide for the synthesis
and uses of gold nanoparticles.
PUBLICATION DATE: JANUARY 2013
FORMAT: PAPERBACK
ISBN: 9781847356437
GB: 80
US: $130
EU: 100
FORMAT: eBOOK
ISBN: 9781847356444
GB: 80
US: $130
EU: 100
:3
Author
Chris Defonseka
This book imparts a sound knowledge of flexible and viscoelastic polyurethane foams from its chemistry to calculations
and formulating methodology for quality production. The author also presents very valuable detailed information on foam
manufacturing, based on over 40 years hands-on experience in both the local and international scenes. The detailed presentation
of two manufacturing set-ups will greatly benefit entrepreneurs, medium volume producers and the large manufacturers. For
the entrepreneurs, the innovative low-cost start-up, high profit, tried and tested methods will no doubt be very encouraging. The
medium to large volume producers will find the information provided both interesting and practical to solve inherent problems of
excess wastage, better process control and plant efficiency thus enhancing profitability.
Due to global environmental concerns, as polyurethane chemical components move from petroleum sources to bio-based
renewable resources, developers are facing interesting challenges. For continued profitable production, challenges facing the
foam machinery manufacturers will be to offer cost-effective, highly-efficient and compatible machinery to producers. This book
provides practical guidance in all aspects of flexible polyurethane foam manufacture and is an ideal information source for
students, teachers, producers and entrepreneurs.
PUBLICATION DATE: FEBRUARY 2013
FORMAT: PAPERBACK
ISBN: 9781847359742
GB: 55
US: $90
EU: 70
FORMAT: eBOOK
ISBN: 9781847359759
GB: 55
US: $90
EU: 70
Authors
Norbert Niessner
Daniel Wagner
4:
ISBN: 9781847355652
GB: 55
US: $90
EU: 70
FORMAT: eBOOK
ISBN: 9781847356918
GB: 55
US: $90
EU: 70
Author
Todorka G.Vladkova
The theoretical basis of surface engineering for improvement of biocontact properties of polymeric biomaterials as well as the
current state-of-the-art of the surface engineering of polymeric biomaterials are presented. The book also includes information
on the most used conventional and advanced surface engineering methods.
The book is targeted at researchers, post-doctorates, graduate students, and those already working in the field of biomaterials
with a special interest in the creation of polymeric materials with improved biocontact properties via surface engineering.
PUBLICATION DATE: FEBRUARY 2013
FORMAT: HARDBACK
ISBN: 9781847356581
GB: 150
US: $250
EU: 190
FORMAT: PAPERBACK
ISBN: 9781847356598
GB: 125
US: $205
EU: 155
FORMAT: eBOOK
ISBN: 9781847356604
GB: 150
US: $250
EU: 190
Author
T. R. Crompton
The second type are rendered fire retardant by the inclusion of a suitable additive in the formulation. These include additives
based on bromine, antimony, nitrogen phosphorus and silicon. An essential requirement for fire retardant polymers used in
enclosed spaces is that they do not release any toxic products upon combustion. In this respect antinomy containing additives are
going out of favour due to the release of toxic antimony volatiles upon combustion.
Thirdly, introduction of intumescence into polymers by the introduction of suitable compounds is being increasingly used as a
means of imparting fire retardancy in polymers.
There exists a plethora of methods used to assess fire retardancy in polymers. These are discussed and summarised in this book.
The book will be of interest not only to working in industry but also to design engineers and producers in the polymer fabrication
industries.
PUBLICATION DATE: MARCH 2013
FORMAT: HARDBACK
ISBN: 9781847354662
GB: 150
US: $250
EU: 190
FORMAT: PAPERBACK
ISBN: 9781847354679
GB: 125
US: $205
EU: 155
FORMAT: eBOOK
ISBN: 9781847354686
GB: 150
US: $250
EU: 190
:5
Edited by
Atul Tiwari
Due to large volume of research publications that have appeared on graphene, the basic important information is hard to
excavate. In order to collect vital information on graphene, this book is compiled in two volumes. Volume 1 is specifically meant
for the beginners who want to understand the science and technology associated with the nanomaterial. The first objective of this
book is to furnish detailed information on the manufacturing or syntheses of graphene and related materials in the lab without
the need of special equipments. The chapters are written systematically so that it is easy to understand science, engineering and
technology behind the material.
The second objective of this book is to deliver readers the information on different techniques used to characterise graphene
and related materials. Content of the book is carefully designed so that readers can easily understand new technologies that are
used to investigate graphene. The book is written for large readership including young scholars and researchers from diverse
backgrounds such as chemistry, physics, materials science, and engineering. It can be used as a textbook for both undergraduate
and graduate students, and also as a review or reference book by researchers in the materials science, engineering and
nanotechnology.
PUBLICATION DATE: MARCH 2013
FORMAT: HARDBACK
ISBN: 9781847359650
GB: 150
US: $250
EU: 190
FORMAT: PAPERBACK
ISBN: 9781847359667
GB: 125
US: $205
EU: 155
FORMAT: eBOOK
ISBN: 9781847359674
GB: 150
US: $250
EU: 190
Authors
Alexander L Kovarski
Olga N Sorokina
6:
ISBN: 9781847357755
GB: 80
US: $130
EU: 100
FORMAT: eBOOK
ISBN: 9781847357762
GB: 80
US: $130
EU: 100
Author
KTRM Project
FORMAT: HARDBACK
ISBN: 9781847357687
GB: TBC
US: $TBC
EU: TBC
FORMAT: PAPERBACK
ISBN: 9781847357694
GB: TBC
US: $TBC
EU: TBC
FORMAT: eBOOK
ISBN: 9781847357700
GB: TBC
US: $TBC
EU: TBC
Author
Salvatore Parisi
FORMAT: HARDBACK
ISBN: 9781847356093
GB: 125
US: $205
EU: 155
FORMAT: PAPERBACK
ISBN: 9781847356109
GB: 95
US: $155
EU: 120
FORMAT: eBOOK
ISBN: 9781847356116
GB: 125
US: $205
EU: 155
Authors
Hugh D.C. Smyth
Jason McConville
Ibrahim El-Sherbiny
This is the first volume totally dedicated to polymers in pulmonary drug delivery and should be the resource of choice for those
in the field, especially managers in the pharma/biotech industry. Naturally, the text will be of great interest to academics and
graduate students. Finally, regulatory affiliated scientists will also find this resource invaluable.
PUBLICATION DATE:APRIL 2013
FORMAT: HARDBACK
ISBN: 9781847356536
GB: 80
US: $130
EU: 100
FORMAT: ebook
ISBN: 9781847356550
GB: 80
US: $130
EU: 100
:7
Author
Jianwei Zhu
FORMAT: PAPERBACK
ISBN: 9781847359766
GB: 80
US: $130
EU: 100
FORMAT: ebook
ISBN: 9781847359773
GB: 80
US: $130
EU: 100
Author
Wayne R. Rogers
FORMAT: HARDBACK
ISBN: 9781847354525
GB: 120
US: $200
EU: 150
FORMAT: PAPERBACK
ISBN: 9781847354532
GB: 95
US: $155
EU: 120
FORMAT: eBOOK
ISBN: 9781847354549
GB: 120
US: $200
EU: 150
Author
Pratima Bajpai
8:
FORMAT: PAPERBACK
ISBN: 9781909030244
GB: 80
US: $130
EU: 100
FORMAT: eBOOK
ISBN: 9781909030251
GB: 80
US: $130
EU: 100
Authors
Akbar K. Haghi
Gennady Zaikov
ISBN: 9781909030190
GB: 80
US: $130
EU: 100
FORMAT: eBOOK
ISBN: 9781909030206
GB: 80
US: $130
EU: 100
Edited by
Ambikanandan Misra
Aliasgar Shahiwala
FORMAT: HARDBACK
ISBN: 9781847358516
GB: 150
US: $250
EU: 190
FORMAT: PAPERBACK
ISBN: 9781847358523
GB: 125
US: $205
EU: 155
FORMAT: eBOOK
ISBN: 9781847358530
GB: 150
US: $250
EU: 190
Edited by
FORMAT: HARDBACK
ISBN: 9781847356338
GB: 125
US: $205
EU: 155
Valentin Popa
FORMAT: PAPERBACK
ISBN: 9781847356345
GB: 95
US: $155
EU: 120
FORMAT: eBOOK
ISBN: 9781847356376
GB: 125
US: $205
EU: 155
:9
2011-2012
Titles
10:
Materials
Compiled by
Smithers Rapra and
Institute of Plastics
Processing (IKV)
ISBN: 9781909030138
GB: 100
US: $165
EU: 125
Authors
Akbar K. Haghi
Gennady Zaikov
ISBN: 9781847356031
GB: 120
US: $200
EU: 150
FORMAT: Paperback
ISBN: 9781847356048
GB: 100
US: $165
EU: 125
FORMAT: eBOOK
ISBN: 9781847356055
GB: 120
US: $200
EU: 150
Authors
Akbar K. Haghi
Gennady Zaikov
Nanomaterials are the study of how materials behave when their dimensions are reduced to the nanoscale. It can also refer to
the materials themselves that are used in nanotechnology. Materials reduced to the nanoscale can suddenly show very different
properties compared to what they exhibit on a macroscale, enabling unique applications. The book offers scopes that have
potential for applications in several disciplines of nano materials. Each chapter ranges from new methods to novel applications
of existing methods to gain understanding of the material and/or structural behaviour of new and advanced systems. In view of
the different background of the expected audience, readers are requested to focus on the main ideas, and to highlight as much
as possible the specific advantages that arise from applying modern ideas. A chapter may therefore be motivated by the specific
problem, but just as well by the advanced method used which may be more generally applicable.The collection of topics in this
second volume of the book reflects the diversity of recent advances in nanofibres with a broad perspective which will be practical
for scientists as well as graduate students and engineers.
PUBLICATION DATE: February 2012
FORMAT: Hardback
ISBN: 9781847356796
GB: 120
US: $200
EU: 150
FORMAT: Paperback
ISBN: 9781847356802
GB: 100
US: $165
EU: 125
FORMAT: eBOOK
ISBN: 9781847356819
GB: 120
US: $200
EU: 150
:11
Materials
Authors
Akbar K. Haghi
Gennady Zaikov
FORMAT: Hardback
ISBN: 9781847356383
GB: 120
US: $200
EU: 150
FORMAT: Paperback
ISBN: 9781847357731
GB: 100
US: $165
EU: 125
FORMAT: eBOOK
ISBN: 9781847357748
GB: 120
US: $200
EU: 150
Authors
Gneri Akovali
Bireswar Banerjee
A K Sen
Dipak K Setua
Polymer coated textiles are known as engineered composite materials at macro scale. Coating can offer significant improvements
to the substrate, thanks to a combination of physical (such as impermeability and fabric abrasion), chemical and aesthetic
components. The number of polymer combinations enables a wide variety of textile substrate structures and new, innovative
applications are being introduced almost every day.The polymer coated textile industry runs in parallel with the developments
in textile research: applications such as reactive coatings with nanoparticles (with self-cleaning, self-sterilising surfaces),
systems with conductive polymer coatings to provide EM shielding, electronic textile systems (with body monitoring properties),
environmental responsive systems and so forth, are already somewhat classical and are continually being developed and
updated.Advances in Polymer Coated Textiles is an up-to-date summary of the technical textile industry, considering the passage
from conventional to emerging technologies. It discusses the criteria for selection of coating and textile and summarises the
manufacturing basics of the system. It explores a range of emerging technologies, including smart, intelligent and nanostructured
applications, alongside the testing and quality control methods of such systems.This book is a must for textile and polymer
technologists, engineers, scientists and students and all those who are interested in this interdisciplinary field.
PUBLICATION DATE: July 2012
FORMAT: Hardback
ISBN: 9781847354976
GB: 125
US: $205
EU: 155
FORMAT: Paperback
ISBN: 9781847354983
GB: 95
US: $155
EU: 120
FORMAT: eBOOK
ISBN: 9781847354990
GB: 125
US: $205
EU: 155
Authors
Elena L. Pekhtasheva
Gennady Zaikov
Anatoly N Neverov
12:
The issue of biodamages comprises a wide range of scientific and practical tasks associated with protection of raw materials
and products against damage by bacteria, fungi, insects and rodents during long-term storage, production, transportation and
operation. The first objective of this book is to provide detailed information on the three interrelated parts: bacteria and fungi (the
source of biodamages); insects and rodents (materials and products depredators); and materials and products damaged by living
organisms. The most modern data on morphology and physiology of biodegrading microorganisms are presented. The second
objective of this book is to provide the reader with a systematisation of biological degradation on both natural and synthetic
materials and products (plastics, textile, fibres, leather and fur, wood and so on). Problems of utilisation of polymeric wastes
using microorganisms are discussed and main protection methods and technology for raw materials and semi-products against
biodamages are shown. Practical recommendation for struggle against biodamage of materials by insects (moth, leather beetles,
wood-fretters, cockroaches and termites) and rodents (mice and rats) are given.The final objective of this book is to illustrate
that the problem of biodamages is very real today because it is relevant to many aspects of our everyday lives.This volume is
intended to be a practical guide on biodamage and biodegradation of polymeric materials and a quick reference to students and
researchers from academia and the industry.
PUBLICATION DATE: September 2012
FORMAT: Hardback
ISBN: 9781847357519
GB: 125
US: $205
EU: 155
FORMAT: Paperback
ISBN: 9781847357526
GB: 95
US: $155
EU: 120
FORMAT: eBOOK
ISBN: 9781847357533
GB: 125
US: $205
EU: 155
Materials
Edited by
Atul Tiwari
Ravi B Srivastava
This comprehensive book provides up-to-date information on the developments in the field of biopolymers. The book introduces the
reader with the progress in the field, followed by outlining its applications in different areas. Different methods and techniques
of synthesis and characterisation are detailed as individual chapters. Various modes and mechanism of degradation of materials
will be discussed. There is a dedicated chapter on industrially available biopolymers and their applications, as well as a chapter
detailing the ongoing research, current trends and future challenges. Unlike other books, this book contains information that is
useful for students who are interested in biotech and polymer research. It will also be useful for researchers involved in hightech research as it will provide up-to-date information available in this field.
PUBLICATION DATE: May 2012
FORMAT: Hardback
ISBN: 9781847355423
GB: 125
US: $205
EU: 155
FORMAT: Paperback
ISBN: 9781847355430
GB: 95
US: $155
EU: 120
FORMAT: eBOOK
ISBN: 9781847355447
GB: 125
US: $205
EU: 155
Author
Antonio Pantano
Carbon nanotubes (CNTs) have amazing properties and a key way to take advantage of this is by incorporating nanotubes into
a matrix to build composite materials. The best candidates for this task are undoubtedly polymers. Almost every characteristic
of a polymer can be significantly enhanced by adding carbon nanotubes and as a result, new potential applications of carbon
nanotube enhanced polymer composites are discovered every day. However, before carbon nanotube enhanced polymer
composites become commonplace there are some tough challenges that need to be overcome. This book reviews the status of
worldwide research in both single-walled and multi-walled carbon nanotube based composites. It serves as a practical guide on
carbon nanotube based composites and a reference to students and researchers from the academia and industry.
PUBLICATION DATE: September 2012
FORMAT: Hardback
ISBN: 9781847355850
GB: 125
US: $205
EU: 155
FORMAT: Paperback
ISBN: 9781847355867
GB: 95
US: $155
EU: 120
FORMAT: eBOOK
ISBN: 9781847355874
GB: 125
US: $205
EU: 155
High Performance Elastomers and Polymers for Oil & Gas 2012
Compiled by
Smithers Rapra
Political pressures and environmental concerns have made new oil deposits more difficult and expensive to find in recent years.
In response to a decreasing supply of oil, the extraction of oil from new and mature reserves has called for high performance
materials with more and more extreme service temperature ranges, increased resistance to harsh oils and chemicals and
the ability to withstand higher pressures in down-hole environments. High performance elastomers and thermoplastics have
been constantly evolving to meet these needs and are now found in just about everything from subsea trees, well heads and
umbilicals to piping and chemical processing plants. Despite these advances, continued research, development and qualification
is still required to reduce the need for costly intervention and to respond to new challenges. These proceedings cover all the
presentations from the conference which was developed for operators, contractors, equipment and component suppliers, material
suppliers and research organisations involved with polymers and their use in oil and gas applications.
PUBLICATION DATE: June 2012
FORMAT: Paperback
ISBN: 9781847357298
GB: 100
US: $165
EU: 125
FORMAT: eBOOK
ISBN: 9781847357304
GB: 100
US: $165
EU: 125
:13
Materials
Compiled by
Smithers Rapra
High Performance Plastics 2011 Conference was dedicated to the advances in plastic materials that are tuned to excel even
in harsh environments and tough service conditions. Some key driving factors for the continued growth of these materials
include:(1) Oil and gas where the exploitation of hotter and deeper wells has necessitated the transition to new, higher
performing plastics; (2) Aerospace, a market which has seen the proliferation of light weight composites to replace traditional
materials like metal; and (3) Microelectronics and semi-conductor applications where reliability, longevity and ultra-low
contamination levels are needed for example in wafer and hard drive handling operations.Other topics covered at the conference
include: Membranes for water treatment, biomedical and fuel cell applications; Photovoltaics where extreme UV durability and
inertness are prerequisites; Electrical insulation for defense, aerospace and nuclear related applications; and Wear resistant and
self-lubricating materials for applications from CMP rings to gears and bearings.
PUBLICATION DATE:April 2011
FORMAT: Paperback
ISBN: 9781847356253
GB: 100
US: $165
EU: 125
FORMAT: eBOOK
ISBN: 9781847356260
GB: 100
US: $165
EU: 125
Compiled by
Smithers Rapra
These proceedings contain all the presentations from this international conference which focused on polymer-based materials
and fortified composites that meet the specific needs of the oil and gas industry. The conference provided a forum for speakers
to showcase new materials and processing technologies that will improve current application performance and open the door
to improve or replace existing material selections.Contributions included papers from leading academic contributors who
will describe investigation of novel high temperature resistant polymers including PPSs, PAEKs, and LCPs. In the oil and gas
application sessions, presentations included discussion of the ever popular PEEK grades from several sources, as well as other
important families of polymers in composite structures and alloys, including PPSs and TPUs. Papers which focus on the analysis
of corrosion, wear and RGD on high performance materials are also included in these proceedings.
PUBLICATION DATE: December 2011
FORMAT: Paperback
ISBN: 9781847356390
GB: 100
US: $180
EU: 160
FORMAT: eBOOK
ISBN: 9781847356406
GB: 100
US: $180
EU: 160
Compiled by
Smithers Rapra
14:
FORMAT: Paperback
ISBN: 9781847357250
GB: 100
US: $165
EU: 125
FORMAT: eBOOK
ISBN: 9781847357267
GB: 100
US: $165
EU: 125
Materials
Nanopolymers 2011
Compiled by
Smithers Rapra
These proceedings cover all the presentations from iSmithers third Nanopolymers conference. All aspects of this fascinating
and rapidly developing field were discussed, which is already beginning to impact on polymer users and researchers in most
industry sectors. The conference updated producers and users involved in polymers, both for components and films, with the
latest thoughts and developments which will affect them.Trends in the field of nanocomposites were covered, along with market
data for projected products. Information on the latest developments incorporating nano-clays, carbon nanotubes and graphene
into composites was also given.Other topics were those which use nano-based polymers for property enhancement, through
flame retardancy, heat resistance, durability, antimicrobial activity, self-cleaning properties, conducting materials, and also those
offering aesthetic effects.Nanotechnologies have attracted a lot of attention, but concerns have been expressed about risks and
environmental impact. Nanopolymers 2011 featured talks on characterisation of nanocomposites, regulatory proposals and
potential restraints, migration of the nano-component from polymers, recyclability, and the current patent landscape.Specific
applications for nanopolymers, including nano-biopolymers, focused on their use in some key industry sectors such as transport,
energy, and environmental applications.
PUBLICATION DATE: November 2011
FORMAT: Paperback
ISBN: 9781847356352
GB: 100
US: $165
EU: 125
FORMAT: eBOOK
ISBN: 9781847356369
GB: 100
US: $165
EU: 125
FORMAT: eBOOK
ISBN: 9781847356819
GB: 120
US: $200
EU: 150
Author
David J. Kemmish
High performance engineering plastics are used in a vast range of applications and environments. They are becoming
increasingly important because of trends towards more reliable and higher performance machines and devices. This book gives
readers a working knowledge and understanding of high performance engineering plastics. It starts with a simple, practical
overview of key properties and principles. In each of the chapters there are sections on production chemistry, product forms,
properties, processing and applications. There is a strong bias towards materials and concepts which are used in practice.
The materials covered include high performance Polyethersulfones, Polyetherimides, Polyphthalamides, Polyphenylene Sulfide,
Polyaryletherketones, Polyamideimides, Polyimides, Polybenzimidazole, Liquid Crystalline Polyesters and Perfluoropolymers.
The reader will develop the ability to understand why materials are chosen for certain applications, why those materials have
particular properties and how those properties can be modified. This will facilitate conversations with both materials suppliers
and end users. It will help to identify the best and most cost effective solutions.
PUBLICATION DATE:August 2011
FORMAT: Hardback
ISBN: 9781847355768
GB: 80
US: $130
EU: 100
FORMAT: Paperback
ISBN: 9781847355775
GB: 55
US: $90
EU: 70
FORMAT: eBOOK
ISBN: 9781847355782
GB: 80
US: $130
EU: 100
Edited by
Jinwen Zhang
Rosin is an abundantly available natural product composed of around 90% acidic and 10% neutral compounds. Rosin and its
derivatives have long been used as tackifiers in adhesives. They have also found other niche applications in inks, varnishes, paints,
sealing wax, some soaps, paper sizing; soldering, plasters, food additives, etc. However, many of the conventional applications
of rosin mainly utilize the inherent physical properties in various practices.In recent years there has been a growing interest
in using rosin acid-derivatives as building blocks in the synthesis of polyesters, polyurethanes, epoxies and curing agents. In
addition, rosin acid derived chemicals are also used as nucleating agents, surfactants, drugs and other special applications.
This book brings together a collection of scientific articles on recent research and development of utilizing natural chemicals
from pine resin as feedstock for polymers and new industrial chemicals. It focuses mainly on the new use of rosin acids, but also
covers the applications of other chemicals from tree sap such as terpinenes. This book will provide considerable material for
researchers in both academia and industry with the latest developments in the utilization of rosin and terpinenes.
PUBLICATION DATE: March 2012
FORMAT: Hardback
ISBN: 9781847355041
GB: 125
US: $205
EU: 155
FORMAT: Paperback
ISBN: 9781847355058
GB: 95
US: $155
EU: 120
FORMAT: eBOOK
ISBN: 9781847355065
GB: 125
US: $205
EU: 155
:15
Materials
RubberChem 2010
Compiled by
Smithers Rapra
The global economic downturn had a vast impact on the rubber chemicals sector as many customers in the allied automotive,
building and construction and industrial equipment fields saw their businesses badly hit. However, with the world economy now
growing and consumer confidence improving, the demand for higher performance and superior durability of rubber articles is
driving technical product developments and innovations in the use of chemicals in rubber compounds. With experts predicting
that the less industrialised nations of China and India will lead the economic recovery, low-price competition from Asia is likely
to continue to impact the European rubber chemicals market. Add to this the complications of the REACH regulations, which have
required large-scale product reformulations and it is clear to see why there is a need for continued research and development to
respond to new challenges.The seventh international conference devoted to rubber chemicals, compounding and mixing covered
developments in a range of rubber chemicals from accelerators, antioxidants and antiozonants to retarders and peptisers. This
event featured representatives from some of the worlds leading companies in the rubber chemicals arena, with papers from
Lanxess, DSM Elastomers, Dow Corning GmbH, Rhein Chemie Rheinau GmbH, Schill & Seilacher Struktol GmbH, and Trelleborg
Wheel Systems.
PUBLICATION DATE: February 2011
FORMAT: Paperback
ISBN: 9781847355553
GB: 100
US: $165
EU: 125
FORMAT: eBOOK
ISBN: 9781847356567
GB: 100
US: $165
EU: 125
Compiled by
Smithers Rapra
ISBN: 9781847356277
GB: 100
US: $165
EU: 125
FORMAT: eBOOK
ISBN: 9781847356284
GB: 100
US: $165
EU: 125
Compiled by
Smithers Rapra
16:
ISBN: 9781847357274
GB: 100
US: $165
EU: 125
FORMAT: eBOOK
ISBN: 9781847357281
GB: 100
US: $165
EU: 125
Materials
Authors
Gasan M. Magomedov
Georgii V Kozlov
Gennady Zaikov
This book gives a fresh point of view on the curing processes, structure and properties of crosslinked polymers. The general
view is that the structure and properties of crosslinked polymers are defined by their density, this book demonstrates that the
parameters are defined by the supermolecular (a more precisely, supersegmental structure) of the crosslinked polymers.The
quantitative relationships of the structures/properties are obtained for these polymers. Using an epoxy polymer as a nanofiller
for a nanocomposite is discussed and a new class of polymer is proposed. The introduction of the nanofiller gives variation in
the mechanical properties, degree of crystallinity, gas permeability and so on. The use of these crosslinked polymers as natural
nanocomposites is proposed. Practical methods of crosslinked polymers supersegmental structure regulation are considered,
and all the changes that this gives their properties are detailed.This book will be of significance to all material scientists and
students of material science.
PUBLICATION DATE: March 2011
FORMAT: Hardback
ISBN: 9781847355591
GB: 125
US: $205
EU: 155
FORMAT: Paperback
ISBN: 9781847355607
GB: 95
US: $155
EU: 120
FORMAT: eBOOK
ISBN: 9781847355614
GB: 125
US: $205
EU: 155
Compiled by
Smithers Rapra
Regarded by many as Europes premier international conference for the thermoplastic elastomer industry, this conference
was an ideal opportunity to hear about the latest developments from a range of exciting speakers from leading TPE producers
to academics. These proceeding will interest material suppliers, processors and manufacturers of finished and semi-finished
products/components as well as manufacturers considering TPEs as a replacement for vulcanised rubber. Indeed, anyone with
an interest in TPEs wishing to gain a better understanding of the subject.These proceedings include significant presentations
on current issues confronting the industry such as use of biomaterials in TPEs and PVC replacement. A specific session was
scheduled to help those struggling with the impact of current legislation on TPEs. As an example of the potential for continuous
development, which is a characteristic of TPEs, this years conference featured a session on new developments in one of the oldest
TPEs - styrene block co-polymers. Other areas covered include new materials such as foams and new building blocks for TPUs.
PUBLICATION DATE: November 2011
FORMAT: Paperback
ISBN: 9781847356413
GB: 100
US: $180
EU: 160
FORMAT: eBOOK
ISBN: 9781847356420
GB: 100
US: $180
EU: 160
Authors
Minna Hakkarainen
Anna-Finne Wistrand
ISBN: 9781847355829
GB: 80
US: $130
EU: 100
FORMAT: eBOOK
ISBN: 9781847355843
GB: 80
US: $130
EU: 100
:17
Author
iPolycond Consortium
Research was based on the compounding of engineering polymers and inherently conductive polymers (ICP) with improved
conductivity, or hybrid systems of ICP with conductive nanotubes and other fibrous conductors. Innovative processing technologies
specifically tailored to the new materials were also developed. The project aimed to dramatically extend the current performance
and processability of ICP and alternative materials to enable significant replacement of metals in EMI shielding and ESD
protection applications.
This book will benefit plastics converters who wish to take full advantage of the potential of conductive plastic materials.
PUBLICATION DATE: OCTOBER 2011
FORMAT: Paperback
ISBN: 9781847355898
GB: 50
US: $85
EU: 65
FORMAT: Hardback
ISBN: 9781847355881
GB: 75
US: $125
EU: 95
FORMAT: eBOOK
ISBN: 9781847355904
GB: 75
US: $125
EU: 95
Author
Elisabetta Princi
FORMAT: Hardback
ISBN: 9781847355799
GB: 120
US: $200
EU: 150
FORMAT: Paperback
ISBN: 9781847355805
GB: 95
US: $155
EU: 120
FORMAT: eBOOK
ISBN: 9781847355812
GB: 120
US: $200
EU: 150
Author
Abrahams Mwasha
18:
In this book, the applications of both vegetable and man-made fibres in situations where there is a requirement for short-term
ground reinforcement are examined and discussed. The use of vegetable fibre geotextiles (VFG), particularly in erosion control
and soil reinforcement, is covered in detail, with examples from various civil engineering applications.
PUBLICATION DATE: SEPTEMBER 2011
FORMAT: Paperback
ISBN: 9781847355300
GB: 55
US: $90
EU: 70
FORMAT: eBOOK
ISBN: 9781847355317
GB: 55
US: $90
EU: 70
Author
Robert Keller
ISBN: 9781847355218
GB: 55
US: $90
EU: 70
FORMAT: eBOOK
ISBN: 9781847355225
GB: 55
US: $90
EU: 70
:19
Author
T. R. Crompton
FORMAT: Hardback
ISBN: 9781847354853
GB: 125
US: $205
EU: 155
FORMAT: Paperback
ISBN: 9781847354860
GB: 95
US: $155
EU: 120
FORMAT: eBOOK
ISBN: 9781847354877
GB: 125
US: $205
EU: 155
Authors
Sergei Levchik
Marcelo Hirschler
Edward Weil
This book presents a state of the art overview of smoke formation from natural and synthetic polymeric materials. Also presented
is a discussion on why different commercial polymers have different intrinsic tendencies to generate smoke and ways in which
smoke generation can be assessed. Mechanisms and general approaches for decreasing smoke formation are examined.
This book also gives an overview of flammability tests for measuring smoke formation. In particular, the criticality of assessing
smoke formation in realistic scale is discussed. An overview is provided of regulations, codes and standards for critical
application of polymeric materials where smoke generation is controlled. Common commercial approaches to decrease smoke
formation in specific polymer systems and for specific applications are also presented. Finally, a balanced opinion on the
controversial issue of smoke and associated combustion gases is given.
PUBLICATION DATE: February 2011
FORMAT: Hardback
ISBN: 9781847354426
GB: 80
US: $130
EU: 100
FORMAT: Paperback
ISBN: 9781847355164
GB: 55
US: $90
EU: 70
FORMAT: eBOOK
ISBN: 9781847354433
GB: 80
US: $130
EU: 100
Author
T. R. Crompton
The mechanisms by which such changes occur are many and it is important to know what these are and to be able to measure
the rate of change of polymer structure and its dependence on temperature and time. Development of an understanding of the
mechanisms of thermal degradation will help the chemist to develop materials with better thermal stability. This is particularly
important in newer developments in engineering and aerospace.
This book reviews in nine chapters the measurement of these properties in the main types of polymers in use today. Numerous
techniques are discussed ranging from thermogravimetric analysis, differential scanning calorimetry, infrared and nuclear magnetic
resonance based methods to pyrolytic techniques such as those based on pyrolysis, gas chromatography and mass spectrometry.
The book is aimed at those engaged in the manufacture of polymers and the development of end-use applications. It is essential
that students of polymer science should have a thorough understanding of polymer stability and an additional aim of the book is to
help in the development of such an interest.
PUBLICATION DATE: May 2012
20:
FORMAT: Hardback
ISBN: 9781847355133
GB: 125
US: $205
EU: 155
FORMAT: Paperback
ISBN: 9781847355140
GB: 95
US: $155
EU: 120
FORMAT: eBOOK
ISBN: 9781847355157
GB: 125
US: $205
EU: 155
Compiled by
Smithers Rapra
As raw material costs still continue to pose a significant economic challenge to manufacturers in high volume markets, end-users
are increasingly sourcing novel materials that represent cost-effective alternatives to traditional choices. This conference was
an opportunity for companies using or considering using expansion processes. For many, foamed substrates can offer the answer
to these ever spiralling expenses as blowing agents and blowing gases are excellent fillers and have the dual benefits of saving
material and reducing weight (which in turn reduces transportation costs).
Today there are numerous solutions on offer - new methods, resins, technology, processes and additives and it seems that demand
for higher performance and lower costs is set to once again drive technical developments in polymeric foams.
PUBLICATION DATE: September 2012
FORMAT: Paperback
ISBN: 9781847357311
GB: 100
US: $165
EU: 125
FORMAT: eBOOK
ISBN: 9781847357328
GB: 100
US: $165
EU: 125
Compiled by
Smithers Rapra
ISBN: 9781847356314
GB: 100
US: $165
EU: 125
FORMAT: eBOOK
ISBN: 9781847356321
GB: 100
US: $165
EU: 125
Edited by
Olga Carneiro
Joao Miguel Nobrega
The main objective of this book is to provide detailed information on the design of extrusion forming tools. It describes the main
problems to be faced when designing dies and calibrators, the most relevant polymer properties to be considered in the design
process, the specific problems related to several types of conventional extrusion dies, and recent developments on the design of
special dies and process modeling. It will be an updated and uncommon book on the subject, where each chapter is prepared
by internationally recognized experts. Having in mind its nature, it is expected to become a useful reference book for higher
education students (both undergraduate and graduate ones), teachers, researchers and engineers active in the extrusion industry.
PUBLICATION DATE: December 2012
FORMAT: Hardback
ISBN: 9781847355171
GB: 125
US: $200
EU: 155
FORMAT: Paperback
ISBN: 9781847355188
GB: 95
US: $155
EU: 120
FORMAT: eBOOK
ISBN: 9781847355195
GB: 125
US: $200
EU: 155
250383
or contact us directly: 8: cparkinson@smithers.com (: UK: +44 (0)1939 250383
:21
Authors
Roy J. Crawford
Mark P. Kearns
ISBN: 9781847355119
GB: 55
US: $90
EU: 70
FORMAT: eBOOK
ISBN: 9781847355126
GB: 55
US: $90
EU: 70
Author
John A. Lindsay
The book is aimed at potential customers and personnel in the injection moulding industry, and emphasises quality control,
including working to the ISO 9001 Standard. It also highlights the need to consider the economics of operation prior to taking
on new projects. Above all, the customer-manufacturer relationship is emphasised at all stages. The customer is encouraged to
examine the capabilities of the manufacturer, and the manufacturer is encouraged to develop a good understanding of the exact
requirements of the customer. This book is of value to all areas of a company, from those who purchase raw materials to those
working in design, technology and production. It will provide a guide for automotive component buyers and should also be useful
to a CEO or board member who is new to the industry.
PUBLICATION DATE: November 2012
FORMAT: Paperback
ISBN: 9781847357076
GB: 55
US: $90
EU: 70
FORMAT: eBOOK
ISBN: 9781847357083
GB: 55
US: $90
EU: 70
Authors
Natamai
Subramanian
Muralisrinivasan
22:
This Update will help the reader enhance their knowledge in PVC processing technology. R&D scientists, researchers, production
managers, chemical engineers, and academics alike will all benefit.
PUBLICATION DATE: June 2011
FORMAT: Hardback
ISBN: 9781847355508
GB: 80
US: $130
EU: 100
FORMAT: eBOOK
ISBN: 9781847355515
GB: 80
US: $130
EU: 100
Author
Energywise Consortium
ISBN: 9781847355911
GB: 75
US: $125
EU: 95
FORMAT: Paperback
ISBN: 9781847355928
GB: 50
US: $85
EU: 65
FORMAT: eBOOK
ISBN: 9781847355935
GB: 75
US: $125
EU: 95
Author
Energywise Consortium
ISBN: 9781847355942
GB: 75
US: $125
EU: 95
FORMAT: Paperback
ISBN: 9781847355959
GB: 50
US: $85
EU: 65
FORMAT: eBOOK
ISBN: 9781847355966
GB: 75
US: $125
EU: 95
:23
Author
Energywise Consortium
ISBN: 9781847355973
GB: 75
US: $125
EU: 95
FORMAT: Paperback
ISBN: 9781847355980
GB: 50
US: $85
EU: 65
FORMAT: eBOOK
ISBN: 9781847355997
GB: 75
US: $125
EU: 95
Compiled by
Smithers Rapra
FORMAT: Paperback
ISBN: 9781847356239
GB: 100
US: $165
EU: 125
FORMAT: eBOOK
ISBN: 9781847356246
GB: 100
US: $165
EU: 125
Compiled by
Smithers Rapra
24:
ISBN: 9781847357236
GB: 100
US: $165
EU: 125
FORMAT: eBOOK
ISBN: 9781847357243
GB: 100
US: $165
EU: 125
Author
Salvatore Parisi
The first objective of this title is to provide detailed and comprehensible information about packaging materials. Food Operators
and Official Inspectors are not accustomed to understanding similar concepts (chemical and physical properties, marketing, QC
failures). Consequently, a descriptive approach will be used to explain the world of packaging materials, differences between
various packaging categories/subclasses and regulatory implications (REACH, BRC-IoP, etc.).
The second objective is to provide the reader with a detailed selection of food failures and different causes:
The incorrect design of package materials, or
The incorrect storage and use of package materials, or
Lack of technical information, or
Synergetic effects (packaging & food-related causes).
Every situation is described and analysed with the aim to provide a reliable diagnosis of the problem (microbial spreading,
alteration of shelf-life values, unpleasant appearance, possible safety problems).
This volume is intended as a practical guide on food packaging and HACCP implications and a quick reference to Official Safety
Inspection bodies, students and researchers from academia and industry.
PUBLICATION DATE: February 2012
FORMAT: Hardback
ISBN: 9781847356062
GB: 125
US: $205
EU: 155
FORMAT: Paperback
ISBN: 9781847356079
GB: 95
US: $155
EU: 120
FORMAT: eBOOK
ISBN: 9781847356086
GB: 125
US: $205
EU: 155
Author
Polymer REACH
Consortium
This book will be useful to anyone who works with polymers or the chemicals that are used to make polymers, whether they are
end-users or suppliers. REACH is affecting everyone concerned with the polymer industry and this book will help them to prepare
for the impact and consequences of the REACH legislation.
PUBLICATION DATE: January 2012
FORMAT: Hardback
ISBN: 9781847356208
GB: 75
US: $125
EU: 95
FORMAT: Paperback
ISBN: 9781847356215
GB: 50
US: $85
EU: 65
FORMAT: eBOOK
ISBN: 9781847356222
GB: 75
US: $125
EU: 95
:25
Compiled by
Smithers Rapra
In 2011 customers in the EU will begin facing the knock-on requirements of registrations from 2010, changes in classification
under the EU implementation of the Globally Harmonised System (GHS), conditions imposed by Exposure Scenarios and even uses
advised against. Not only are there widespread concerns over the EUs implementation of the GHS for the classification, labelling
and packaging of substances (CLP), but 2011 also brings new obligations, such as the need to notify substances of very high
concern (SVHC) to the European Chemicals Agency (ECHA). In the US plans to introduce the GHS will undoubtedly cause similar
fears.
At the same time, the next registration deadline is only 2 years away. This second phase of Registration presents additional
management hurdles, as it involves a large number of substances that may be relatively data poor compared with substances
registered in 2010. Companies must already begin planning, in particular with regards to budgeting for this next step in REACH.
2011 therefore presents industry and regulators with a critical year for gaining experience with how REACH actually works
in practice. In turn, changes in official guidance and a legislative review in 2012 offer the possibility of improvements to the
workability of REACH.
Whether youre a cosmetics company, an aerospace manufacturer or a raw material supplier, REACH applies to you. These
proceedings cover all the presentations from the conference which enveloped some of the vital lessons that have been learned,
how the next deadlines in 2013 will affect the way you do business and what damage limitation controls can be put in place for
2011 when many fail to meet their obligations.
PUBLICATION DATE: June 2011
26:
FORMAT: Paperback
ISBN: 9781847356291
GB: 100
US: $165
EU: 125
FORMAT: eBOOK
ISBN: 9781847356307
GB: 100
US: $165
EU: 125
Pharmaceutical
Edited by
Nuno M. Neves
ISBN: 9781847356000
GB: 150
US: $250
EU: 190
FORMAT: Paperback
ISBN: 9781847356017
GB: 125
US: $205
EU: 155
FORMAT: eBOOK
ISBN: 9781847356024
GB: 150
US: $250
EU: 190
Compiled by
Smithers Rapra
Extractables and leachables assessment of all materials and especially from elastomeric and plastic components forms an
integral part of the submission for approval of a new drug system or medical device. It is therefore essential that any company
involved in the supply chain - from raw material suppliers, processors, convertors to the pharmaceutical supplier - is fully aware
of the latest developments and best practice in generating test results and data to support successful regulatory submissions to
both the FDA and EMEA.
These proceedings cover all the presentations from this conference which brought together the pharmaceutical supply chain to
discuss the latest research in minimising the risks associated with extractables and leachables.
PUBLICATION DATE: NOVEMBER 2011
FORMAT: Paperback
ISBN: 9781847356642
GB: 100
US: $165
EU: 125
FORMAT: eBOOK
ISBN: 9781847356659
GB: 100
US: $165
EU: 125
:27
Pharmaceutical
Edited by
Eliana Souto
Also addressed is how diagnostic strategies with lipid nanocarriers can be combined with therapeutics, which will be important
for the personalized management of cancer.
Cancer chemotherapeutic drugs are also being used as immunosuppressive agents in the chronic treatment of non-neoplastic
diseases. The scientific research in this field has been focused on the development of strategies to target and deliver several
cancer chemotherapeutic drugs to decrease citotoxicity. These include both carrier- and receptor-mediated nanocarriers. Being
biodegradable and biocompatible systems, lipid nanocarriers have been extensively explored to increase its therapeutic index,
reducing adverse side effects to ultimately extend life-span of patients.
Furthermore, a familiarity with lipid materials science will enable scientists to conduct rational performulation studies, to
understand and optimize formulations, drug delivery systems and their manufacturing processes as well as associated process
analytical technologies and quality by design.
PUBLICATION DATE: JULY 2011
FORMAT: Hardback
ISBN: 9781847354778
GB: 130
US: $215
EU: 165
FORMAT: Paperback
ISBN: 9781847354785
GB: 90
US: $150
EU: 115
FORMAT: eBOOK
ISBN: 9781847354792
GB: 130
US: $215
EU: 165
Edited by
Valentin Popa
28:
ISBN: 9781847354365
GB: 160
US: $265
EU: 200
FORMAT: Paperback
ISBN: 9781847354372
GB: 135
US: $220
EU: 170
FORMAT: eBOOK
ISBN: 9781847354389
GB: 160
US: $265
EU: 200
Pharmaceutical
Authors
Viola B Morris
Chandra P. Sharma
Chitosan, being a linear cationic polysaccharide, consists of ? 1?4 linked glucosamine partly containing N-acetylglucosamine.
It was first described as a delivery system for plasmids by Mumpers group in 1995. The role of chitosan in gene delivery was
supported by its ability to protonate in acidic conditions and to form complexes with anionic DNA by electrostatic interactions. The
biodegradable cationic polymer chitosan is capable of forming small and stable toroidal complexes with plasmid DNA and provide
protection against DNase that is comparable to PEI.
The objective of this book is to integrate the concepts related to chitosan and its derivative-based drug/gene delivery carriers.
For example, the success of the gene delivery system mainly depends upon the uptake by the cells, unpacking behaviour of pDNA/
siRNA from the vector and its intracellular trafficking. Such concepts are introduced and discussed, in addition to the various
applications of chitosan as a drug delivery system in wound healing, tissue engineering and in gene delivery.
This book is an excellent resource for the academic faculty, graduate students and professionals interested in chitosan-based
drug/gene technologies.
PUBLICATION DATE: JUNE 2012
FORMAT: Hardback
ISBN: 9781847356666
GB: 80
US: $130
EU: 100
FORMAT: eBOOK
ISBN: 9781847356680
GB: 80
US: $130
EU: 100
Update on Life Cycle Strategy for New Implants and Medical Devices
With the emergence of new therapies for diseases which affect vital organs either partially or as a whole, the complexity of the
parameter interaction and the variety of new discoveries opens many possibilities to implement these proposals into clinical use.
Unfortunately, this diversity can also handicap an efficient design process.
Therefore, a practical tool has to be developed, which in the early development stages, systematically supports the product and
process optimization by preparing and providing information and knowledge.
This book details such a methodology for systematizing the product design process, which uses a knowledge-based design
process, a customer-oriented engineering process, and a business supporting life cycle model.
Author
Marvi Sri Harwoko
This book describes how this methodology can be used as a product design guidance tool for supporting the development of a new
implant. The methodology resolves the development complexity by using a series of logical steps and provides researchers with
the means to assess these steps as soon as possible for anticipating and removing subsequent useless steps. The methodology
requires a systematization which supports a procedure for sustainable development and which will guide the industrialization of a
new therapy in life sciences.
PUBLICATION DATE: OCTOBER 2012
FORMAT: Hardback
ISBN: 9781847354396
GB: 80
US: $130
EU: 100
FORMAT: eBOOK
ISBN: 9781847354419
GB: 80
US: $130
EU: 100
:29
Pharmaceutical
Authors
Andreas M. Nystrm
Xianghui Zeng
Yuning Zhang
Jakob Regberg
One focus of this update is to give examples of recent developments in drug delivery, ligand targeted therapy and diagnostic
imaging techniques. One section is devoted to the latest developments in nanomedicine - theranostic systems - which combine
therapeutic delivery with diagnostic imaging capabilities in the same device. Such systems will play a crucial role in developing
personalised medicine.
PUBLICATION DATE: OCTOBER 2012
FORMAT: Hardback
ISBN: 9781847357472
GB: 80
US: $130
EU: 100
FORMAT: eBOOK
ISBN: 9781847357465
GB: 80
US: $130
EU: 100
Author
Atish S. Mundada
The effective dose of medication administered ophthalmically may be altered by increasing the retention time of medication in
contact with the surface of the eye. To date, Pharmaceutical Technologists have tried to develop different novel formulations like
gel, ocular inserts, collagen shields, implants, liposomes, nanoparticles, penetration enhancers and in-situ gelling systems, in
order to increase the bioavailability and duration of the therapeutic action of ocular drugs and polymers plays an important role
in all these approaches.
This book provides detailed information regarding all such polymers which have been used and shown to be excellent in
improving the bioavailability of ocular drugs.
PUBLICATION DATE: DECEMBER 2011
FORMAT: Hardback
ISBN: 9781847355621
GB: 80
US: $130
EU: 100
FORMAT: eBOOK
ISBN: 9781847355645
GB: 80
US: $130
EU: 100
Authors
Fang Liu
Emma McConnell
Samuel Pygall
30:
This update will interest everyone involved in the pharmaceutical world, whether in academia or in industry. It will be of particular
value to those responsible for designing new oral drug delivery systems involving polymers. It will provide a useful reference
text both for researchers and manufacturers, and will also be a helpful introduction for students of all levels to the application of
polymers in pharmacy.
PUBLICATION DATE: DECEMBER 2011
FORMAT: Hardback
ISBN: 9781847355379
GB: 80
US: $130
EU: 100
FORMAT: eBOOK
ISBN: 9781847355386
GB: 80
US: $130
EU: 100
Pharmaceutical
Author
Luigi Pasqua
ISBN: 9781847355072
GB: 80
US: $130
EU: 100
FORMAT: eBOOK
ISBN: 9781847355096
GB: 80
US: $130
EU: 100
Author
Andrew Feilden
FORMAT: Hardback
ISBN: 9781847354556
GB: 80
US: $130
EU: 100
FORMAT: eBOOK
ISBN: 9781847354563
GB: 80
US: $130
EU: 100
:31
(2000-2010)
32:
Materials
ISBN: 9781859572955
GB: 90
US: $162
EU: 144
GB: 100
US: $180
EU: 160
GB: 100
US: $180
EU: 160
GB: 100
US: $180
EU: 160
GB: 100
US: $180
EU: 160
GB: 100
US: $180
EU: 160
GB: 100
US: $180
EU: 160
ISBN: 9781859573181
ISBN: 9781859573709
ISBN: 9781859574515
ISBN: 9781859575307
ISBN: 9781847350039
ISBN: 9781847350183
ISBN: 9781847359353
GB: 100
US: $180
EU: 160
FORMAT: Paperback
ISBN: 9781847350756
GB: 100
US: $180
EU: 160
ISBN: 9781847353962
GB: 100
US: $180
EU: 160
FORMAT: eBOOK
ISBN: 9781847357489
GB: 100
US: $180
EU: 160
ISBN: 9781859572757
GB: 150
US: $198
EU: 240
FORMAT: eBOOK
ISBN: 9781847351753
GB: 150
US: $198
EU: 240
:33
Materials
ISBN: 9781847354310
GB: 80
US: $130
EU: 100
FORMAT: eBOOK
ISBN: 9781847354327
GB: 100
US: $165
EU: 125
ISBN: 9781847354204
GB: 80
US: $130
EU: 100
FORMAT: eBOOK
ISBN: 9781847354297
GB: 100
US: $165
EU: 125
ISBN: 9781847354341
GB: 80
US: $130
EU: 100
FORMAT: eBOOK
ISBN: 9781843754358
GB: 100
US: $165
EU: 125
ISBN: 9781847350725
GB: 100
US: $180
EU: 160
FORMAT: eBOOK
ISBN: 9781847357489
GB: 100
US: $180
EU: 160
Biocides in Plastics
PUBLICATION DATE: 2004
FORMAT: Paperback
ISBN: 9781859575123
GB: 85
US: $153
EU: 136
FORMAT: eBOOK
ISBN: 9781847350497
GB: 85
US: $153
EU: 136
ISBN: 9781847350671
GB: 100
US: $180
EU: 160
FORMAT: eBOOK
ISBN: 9781847359407
GB: 100
US: $180
EU: 160
ISBN: 9781847355546
GB: 100
US: $165
EU: 125
FORMAT: eBOOK
ISBN: 9781847356574
GB: 100
US: $165
EU: 125
FORMAT: Paperback
ISBN: 9781859573792
GB: 85
US: $153
EU: 136
FORMAT: eBOOK
ISBN: 9781847351890
GB: 85
US: $153
EU: 136
Biopolymers
PUBLICATION DATE: 2003
34:
ISBN: 9781859573150
GB: 100
US: $180
EU: 160
Materials
ISBN: 9781859573662
GB: 100
US: $180
EU: 160
ISBN: 9781859575154
GB: 100
US: $180
EU: 160
ISBN: 9781847350718
GB: 100
US: $180
EU: 160
FORMAT: eBook
ISBN: 9781847359384
GB: 100
US: $180
EU: 160
ISBN: 9781847353924
GB: 100
US: $180
EU: 160
FORMAT: eBOOK
ISBN: 9781847357502
GB: 100
US: $180
EU: 160
ISBN: 9781847354952
GB: 100
US: $180
EU: 160
FORMAT: eBOOK
ISBN: 9781847357540
GB: 100
US: $180
EU: 160
ISBN: 9781859573211
GB: 80
US: $144
EU: 128
FORMAT: eBOOK
ISBN: 9781847351890
GB: 80
US: $144
EU: 128
ISBN: 9781859575017
GB: 135
US: $243
EU: 216
FORMAT: eBOOK
ISBN: 9781847350350
GB: 135
US: $243
EU: 216
ISBN: 9781859574874
GB: 100
US: $180
EU: 160
FORMAT: Hardback
ISBN: 9781859574881
GB: 150
US: $270
EU: 240
FORMAT: eBOOK
ISBN: 9781847351821
GB: 100
US: $180
EU: 160
ISBN: 9781859573730
GB: 85
US: $153
EU: 136
FORMAT: eBOOK
ISBN: 9781847351807
GB: 85
US: $153
EU: 136
:35
Materials
ISBN: 9781859574331
GB: 85
US: $153
EU: 136
FORMAT: eBOOK
ISBN: 9781847351852
GB: 85
US: $153
EU: 136
ISBN: 9781859573808
GB: 300
US: $540
EU: 480
FORMAT: eBOOK
ISBN: 9781847350602
GB: 300
US: $540
EU: 480
ISBN: 9781859574362
GB: 85
US: $153
EU: 136
FORMAT: eBOOK
ISBN: 9781847351990
GB: 85
US: $153
EU: 136
US: $180
EU: 160
ISBN: 9781859573693
GB: 100
ISBN: 9781847350657
GB: 85
US: $153
EU: 136
FORMAT: eBOOK
ISBN: 9781847351555
GB: 85
US: $153
EU: 136
ISBN: 9781859573853
GB: 300
US: $540
EU: 480
FORMAT: eBOOK
ISBN: 9781847351609
GB: 300
US: $540
EU: 480
Fluoroplastics
PUBLICATION DATE: 2005
FORMAT: Paperback
ISBN: 9781847350077
GB: 85
US: $153
EU: 136
FORMAT: eBOOK
ISBN: 9781847350312
GB: 85
US: $153
EU: 136
ISBN: 9781859572733
GB: 255
US: $459
EU: 408
US: $180
EU: 160
36:
ISBN: 9781847350121
GB: 100
Materials
ISBN: 9781859573891
GB: 110
US: $198
EU: 176
FORMAT: eBOOK
ISBN: 9781847350442
GB: 110
US: $198
EU: 176
ISBN: 9781859573389
GB: 110
US: $198
EU: 176
FORMAT: eBOOK
ISBN: 9781847351722
GB: 110
US: $198
EU: 176
ISBN: 9781859573099
GB: 500
US: $900
EU: 800
ISBN: 9781859572498
GB: 150
US: $270
EU: 240
ISBN: 9781859572788
GB: 150
US: $270
EU: 240
ISBN: 9781859573037
GB: 150
US: $270
EU: 120
ISBN: 9781859573044
GB: 150
US: $270
EU: 120
ISBN: 9781859573884
GB: 95
US: $171
EU: 152
FORMAT: eBOOK
ISBN: 9781847350541
GB: 95
US: $171
EU: 152
ISBN: 9781847354105
GB: 125
US: $225
EU: 200
FORMAT: Paperback
ISBN: 9781847354112
GB: 100
US: $180
EU: 160
FORMAT: eBOOK
ISBN: 9781847354129
GB: 125
US: $225
EU: 200
:37
Materials
ISBN: 9781847350213
GB: 100
US: $180
EU: 160
ISBN: 9781847354938
GB: 100
US: $165
EU: 125
FORMAT: eBOOK
ISBN: 9781847357557
GB: 100
US: $165
EU: 125
US: $180
EU: 160
US: $180
EU: 160
ISBN: 9781859575000
GB: 100
ISBN: 9781847350138
GB: 100
ISBN: 9781847353894
GB: 100
US: $180
EU: 160
FORMAT: eBOOK
ISBN: 9781847357571
GB: 100
US: $180
EU: 160
ISBN: 9781859575055
GB: 100
US: $180
EU: 160
ISBN: 9781859573198
GB: 100
US: $180
EU: 160
HPE 2002
PUBLICATION DATE: 2002
FORMAT: Paperback
ISBN: 9781847351708
GB: 80
US: $108
EU: 128
FORMAT: Paperback
ISBN: 9781859572795
GB: 80
US: $108
EU: 128
ISBN: 9781859572993
GB: 90
US: $162
EU: 144
Latex 2001
PUBLICATION DATE: 2001
FORMAT: Paperback
38:
FORMAT: Paperback
ISBN: 9781847350664
GB: 100
US: $180
EU: 160
FORMAT: eBOOK
ISBN: 9781847359735
GB: 100
US: $180
EU: 160
Materials
ISBN: 9781847353993
GB: 100
US: $165
EU: 125
FORMAT: eBOOK
ISBN: 9781847357588
GB: 100
US: $165
EU: 125
GB: 80
US: $124
EU: 128
ISBN: 9781859572146
ISBN: 9781859571668
GB: 95
US: $126
EU: 152
FORMAT: eBOOK
ISBN: 9781859573433
GB: 95
US: $126
EU: 152
GB: 100
US: $180
EU: 160
GB: 100
US: $180
EU: 160
ISBN: 9781859575406
Nanopolymers 2007
PUBLICATION DATE: 2007
FORMAT: Paperback
ISBN: 9781847350169
Nanopolymers 2008
PUBLICATION DATE: 2008
FORMAT: Paperback
ISBN: 9781847350749
GB: 100
US: $180
EU: 160
FORMAT: eBOOK
ISBN: 9781847357601
GB: 100
US: $180
EU: 160
US: $459
EU: 408
ISBN: 9781859573600
GB: 255
ISBN: 9781859573594
GB: 80
US: $144
EU: 128
FORMAT: eBOOK
ISBN: 9781859574287
GB: 80
US: $144
EU: 128
Nucleating Agents
PUBLICATION DATE: 2005
FORMAT: Paperback
ISBN: 9781847350831
GB: 85
US: $153
EU: 136
FORMAT: eBOOK
ISBN: 9781847351531
GB: 85
US: $153
EU: 136
:39
Materials
ISBN: 9781859573105
GB: 80
US: $144
EU: 128`
FORMAT: eBOOK
ISBN: 9781847350329
GB: 80
US: $144
EU: 128
US: $180
EU: 160
ISBN: 9781847350343
GB: 100
ISBN: 9781859573822
GB: 100
US: $180
EU: 160
ISBN: 9781847351845
GB: 85
US: $153
EU: 136
FORMAT: Paperback
ISBN: 9781859574355
GB: 85
US: $153
EU: 136
Plastics Additives
PUBLICATION DATE: 2005
FORMAT: Paperback
ISBN: 9781859574997
GB: 300
US: $540
EU: 480
FORMAT: eBOOK
ISBN: 9781847350374
GB: 300
US: $540
EU: 480
ISBN: 9781847355003
GB: 120
US: $200
EU: 150
FORMAT: eBOOK
ISBN: 9781847355027
GB: 120
US: $200
EU: 150
FORMAT: Paperback
ISBN: 9781847355010
GB: 100
US: $165
EU: 125
ISBN: 9781859573952
GB: 85
US: $153
EU: 136
FORMAT: eBOOK
ISBN: 9781847351791
GB: 85
US: $153
EU: 136
GB: 50
US: $90
EU: 80
Polymer Lexicon
PUBLICATION DATE: 1998
FORMAT: Hardback
ISBN: 9781859571361
Polymer Yearbook 18
PUBLICATION DATE: 2003
40:
FORMAT: Paperback
ISBN: 9781859573839
GB: 100
US: $180
EU: 160
FORMAT: eBOOK
ISBN: 9781847351685
GB: 100
US: $180
EU: 160
Materials
ISBN: 9781859573914
GB: 85
US: $153
EU: 136
FORMAT: eBOOK
ISBN: 9781847352071
GB: 85
US: $153
EU: 136
Polyolefin Foams
PUBLICATION DATE: 2003
FORMAT: Paperback
ISBN: 9781859574348
GB: 85
US: $153
EU: 136
FORMAT: eBOOK
ISBN: 9781847351869
GB: 85
US: $153
EU: 136
ISBN: 9781847350961
GB: 85
US: $153
EU: 136
FORMAT: Paperback
ISBN: 9781847350954
GB: 85
US: $153
EU: 136
ISBN: 9781847351180
GB: 50
US: $80
EU: 65
FORMAT: Hardback
ISBN: 9781847351173
GB: 75
US: $125
EU: 95
FORMAT: eBOOK
ISBN: 9781847351197
GB: 75
US: $125
EU: 95
ISBN: 9781859574935
GB: 50
US: $90
EU: 80
FORMAT: eBOOK
ISBN: 9781847350510
GB: 50
US: $90
EU: 80
ISBN: 9781847350589
GB: 50
US: $90
EU: 80
FORMAT: eBOOK
ISBN: 9781847350596
GB: 50
US: $90
EU: 80
ISBN: 9781859572825
GB: 50
US: $90
EU: 80
FORMAT: eBOOK
ISBN: 9781859573457
GB: 50
US: $90
EU: 80
ISBN: 9781859575116
GB: 50
US: $90
EU: 80
FORMAT: eBOOK
ISBN: 9781847350527
GB: 50
US: $90
EU: 80
US: $459
EU: 408
ISBN: 9781859573112
GB: 255
:41
Materials
ISBN: 9781847353757
GB: 50
US: $90
EU: 80
FORMAT: eBOOK
ISBN: 9781847353764
GB: 50
US: $90
EU: 80
Rubber Basics
PUBLICATION DATE: 2002
FORMAT: Paperback
ISBN: 9781859573075
GB: 80
US: $144
EU: 128
FORMAT: eBOOK
ISBN: 9781859573402
GB: 80
US: $144
EU: 128
GB: 15
US: $90
EU: 24
ISBN: 9781859573204
ISBN: 9781847350992
GB: 135
US: $243
EU: 216
FORMAT: Hardback
ISBN: 9781847351005
GB: 160
US: $288
EU: 256
FORMAT: eBOOK
ISBN: 9781847351012
GB: 160
US: $288
EU: 256
GB: 90
US: $162
EU: 144
GB: 100
US: $180
EU: 160
GB: 100
US: $180
EU: 160
GB: 100
US: $180
EU: 160
GB: 100
US: $180
EU: 160
RubberChem 2001
PUBLICATION DATE: 2001
FORMAT: Paperback
ISBN: 9781859572535
RubberChem 2002
PUBLICATION DATE: 2002
FORMAT: Paperback
ISBN: 9781859573167
RubberChem 2004
PUBLICATION DATE: 2004
FORMAT: Paperback
ISBN: 9781859574522
RubberChem 2006
PUBLICATION DATE: 2006
FORMAT: Paperback
ISBN: 9781847350053
RubberChem 2008
PUBLICATION DATE: 2009
FORMAT: Paperback
ISBN: 9781847350770
Silicone Elastomers
PUBLICATION DATE: 2001
42:
FORMAT: Paperback
ISBN: 9781859572979
GB: 80
US: $144
EU: 128
FORMAT: eBOOK
ISBN: 9781859574133
GB: 80
US: $144
EU: 128
Materials
ISBN: 9781847350022
GB: 100
US: $180
EU: 160
ISBN: 9781847350695
GB: 100
US: $180
EU: 160
FORMAT: eBOOK
ISBN: 9781847357656
GB: 100
US: $180
EU: 160
ISBN: 9781847353955
GB: 100
US: $180
EU: 160
FORMAT: eBOOK
ISBN: 9781847357663
GB: 100
US: $180
EU: 160
ISBN: 9781847354945
GB: 100
US: $180
EU: 160
FORMAT: eBOOK
ISBN: 9781847357670
GB: 100
US: $180
EU: 160
GB: 100
US: $180
EU: 160
ISBN: 9781859573365
ISBN: 9781859572856
GB: 80
US: $144
EU: 128
FORMAT: eBOOK
ISBN: 9781847359964
GB: 80
US: $144
EU: 128
Styrenic Copolymers
PUBLICATION DATE: 2003
FORMAT: Paperback
ISBN: 9781859573631
GB: 80
US: $144
EU: 128
FORMAT: eBOOK
ISBN: 9781859574300
GB: 80
US: $144
EU: 128
GB: 255
US: $459
EU: 408
Thermoplastic Elastomers
PUBLICATION DATE: 2001
FORMAT: Paperback
ISBN: 9781859573020
ISBN: 9781847350640
GB: 120
US: $216
EU: 192
FORMAT: Paperback
ISBN: 9781847350626
GB: 95
US: $171
EU: 152
FORMAT: Hardback
ISBN: 9781847350633
GB: 120
US: $216
EU: 192
:43
Materials
Thermoset Resins
PUBLICATION DATE: 2002
FORMAT: Paperback
ISBN: 9781859573556
GB: 255
US: $459
EU: 408
FORMAT: eBOOK
ISBN: 9781847351623
GB: 255
US: $459
EU: 408
ISBN: 9781859572764
GB: 90
US: $162
EU: 144
ISBN: 9781859573174
GB: 100
US: $180
EU: 160
ISBN: 9781859573686
GB: 100
US: $180
EU: 160
ISBN: 9781859574508
GB: 100
US: $180
EU: 160
ISBN: 9781859575253
GB: 100
US: $180
EU: 160
ISBN: 9781847350046
GB: 100
US: $180
EU: 160
ISBN: 9781847350206
GB: 100
US: $180
EU: 160
FORMAT: Paperback
ISBN: 9781847350763
GB: 100
US: $180
EU: 160
FORMAT: eBOOK
ISBN: 9781847359377
GB: 100
US: $180
EU: 160
FORMAT: Paperback
ISBN: 9781847353979
GB: 100
US: $165
EU: 125
FORMAT: eBOOK
ISBN: 9781847356727
GB: 100
US: $165
EU: 125
TPE 2001
PUBLICATION DATE: 2001
FORMAT: Paperback
TPE 2002
PUBLICATION DATE: 2002
FORMAT: Paperback
TPE 2003
PUBLICATION DATE: 2003
FORMAT: Paperback
TPE 2004
PUBLICATION DATE: 2004
FORMAT: Paperback
TPE 2005
PUBLICATION DATE: 2005
FORMAT: Paperback
TPE 2006
PUBLICATION DATE: 2006
FORMAT: Paperback
TPE 2007
PUBLICATION DATE: 2007
FORMAT: Paperback
TPE 2008
PUBLICATION DATE: 2009
TPE 2009
PUBLICATION DATE: 2010
44:
Materials
TPE 2010
PUBLICATION DATE: 2010
FORMAT: Paperback
ISBN: 9781847354969
GB: 100
US: $165
EU: 125
FORMAT: eBOOK
ISBN: 9781847359346
GB: 100
US: $165
EU: 125
ISBN: 9781847354808
GB: 75
US: $125
EU: 95
FORMAT: eBOOK
ISBN: 9781847354815
GB: 75
US: $125
EU: 95
ISBN: 9781847351203
GB: 75
US: $125
EU: 95
FORMAT: eBOOK
ISBN: 9781847351210
GB: 75
US: $125
EU: 95
ISBN: 9781859572382
GB: 255
US: $459
EU: 408
:45
ISBN: 9781847351746
GB: 300
US: $540
EU: 480
FORMAT: Paperback
ISBN: 9781859573655
GB: 300
US: $540
EU: 480
ISBN: 9781847351715
GB: 110
US: $198
EU: 176
FORMAT: Hardback
ISBN: 9781859572771
GB: 110
US: $198
EU: 176
ISBN: 9781859575277
GB: 90
US: $162
EU: 144
FORMAT: eBOOK
ISBN: 9781847350268
GB: 90
US: $162
EU: 144
ISBN: 9781847350794
GB: 85
US: $153
EU: 136
FORMAT: eBOOK
ISBN: 9781847351357
GB: 85
US: $153
EU: 136
ISBN: 9781859573815
GB: 85
US: $153
EU: 136
FORMAT: eBOOK
ISBN: 9781847351784
GB: 85
US: $153
EU: 136
ISBN: 9781859572375
GB: 255
US: $459
EU: 408
FORMAT: eBOOK
ISBN: 9781847351692
GB: 255
US: $459
EU: 408
ISBN: 9781847351418
GB: 100
US: $180
EU: 160
FORMAT: Paperback
ISBN: 9781847354198
GB: 80
US: $144
EU: 128
FORMAT: eBOOK
ISBN: 9781847354150
GB: 100
US: $180
EU: 160
ISBN: 9781847353900
GB: 100
US: $180
EU: 160
FORMAT: eBOOK
ISBN: 9781847357564
GB: 100
US: $180
EU: 160
46:
FORMAT: Paperback
ISBN: 9781859575222
GB: 85
US: $153
EU: 136
FORMAT: eBOOK
ISBN: 9781847350332
GB: 85
US: $153
EU: 136
Geosynthetics
PUBLICATION DATE: 2003
FORMAT: Paperback
ISBN: 9781859573754
GB: 85
US: $153
EU: 136
ISBN: 9781859572634
GB: 95
US: $126
EU: 152
FORMAT: eBOOK
ISBN: 9781847350114
GB: 95
US: $126
EU: 152
ISBN: 9781859572863
GB: 155
US: $207
EU: 248
FORMAT: eBOOK
ISBN: 9781847351654
GB: 155
US: $207
EU: 248
GB: 100
US: $180
EU: 160
ISBN: 9781859572900
ISBN: 9781859574843
GB: 300
US: $540
EU: 480
FORMAT: eBOOK
ISBN: 9781847351661
GB: 300
US: $540
EU: 480
ISBN: 9781859573006
GB: 90
US: $162
EU: 144
ISBN: 9781859575659
GB: 100
US: $180
EU: 160
ISBN: 9781859574799
GB: 85
US: $153
EU: 136
FORMAT: eBOOK
ISBN: 9781847352019
GB: 85
US: $153
EU: 136
US: $180
EU: 160
ISBN: 9781847350176
GB: 100
ISBN: 9781859574805
GB: 300
US: $540
EU: 480
FORMAT: eBOOK
ISBN: 9781847351678
GB: 300
US: $540
EU: 480
:47
ISBN: 9781859572344
GB: 255
US: $459
EU: 408
ISBN: 9781859573297
GB: 255
US: $459
EU: 408
ISBN: 9781847354228
GB: 80
US: $144
EU: 128
FORMAT: Hardback
ISBN: 9781847354211
GB: 100
US: $180
EU: 160
FORMAT: eBOOK
ISBN: 9781847354235
GB: 100
US: $180
EU: 160
ISBN: 9781859572405
GB: 255
US: $459
EU: 408
FORMAT: eBOOK
ISBN: 9781847351616
GB: 255
US: $459
EU: 408
ISBN: 9781847351944
GB: 85
US: $153
EU: 136
ISBN: 9781859572542
GB: 90
US: $162
EU: 144
ISBN: 9781859571903
GB: 255
US: $459
EU: 408
ISBN: 9781847350930
GB: 85
US: $140
EU: 105
FORMAT: eBOOK
ISBN: 9781847354693
GB: 85
US: $140
EU: 105
48:
ISBN: 9781859574492
GB: 100
US: $180
EU: 160
ISBN: 9781859574607
GB: 85
US: $153
EU: 136
FORMAT: eBOOK
ISBN: 9781847351975
GB: 85
US: $153
EU: 136
Polymers in Asphalt
PUBLICATION DATE: 2004
FORMAT: Paperback
ISBN: 9781859575079
GB: 85
US: $153
EU: 136
FORMAT: eBOOK
ISBN: 9781847350480
GB: 85
US: $153
EU: 136
ISBN: 9781859575451
GB: 100
US: $180
EU: 160
ISBN: 9781859573327
GB: 255
US: $459
EU: 408
FORMAT: Paperback
ISBN: 9781859573624
GB: 80
US: $144
EU: 128
FORMAT: eBOOK
ISBN: 9781847350503
GB: 80
US: $144
EU: 128
ISBN: 9781859574911
GB: 95
US: $171
EU: 152
FORMAT: eBOOK
ISBN: 9781847350275
GB: 95
US: $171
EU: 152
Polymers in Construction
PUBLICATION DATE: 2005
FORMAT: Paperback
ISBN: 9781859574683
GB: 95
US: $171
EU: 152
FORMAT: eBOOK
ISBN: 9781847351777
GB: 95
US: $171
EU: 152
ISBN: 9781847353986
GB: 100
US: $165
EU: 125
FORMAT: eBOOK
ISBN: 9781847357618
GB: 100
US: $165
EU: 125
Polymers in Electronics
PUBLICATION DATE: 2006
FORMAT: Paperback
ISBN: 9781847350060
GB: 300
US: $540
EU: 480
FORMAT: eBOOK
ISBN: 9781847350404
GB: 300
US: $540
EU: 480
US: $180
EU: 160
ISBN: 9781847350091
GB: 100
:49
ISBN: 9781859572559
GB: 55
US: $99
EU: 88
US: $144
EU: 128
ISBN: 9781859572597
GB: 80
ISBN: 9781859572894
GB: 80
US: $144
EU: 128
FORMAT: eBOOK
ISBN: 9781859574119
GB: 80
US: $144
EU: 128
ISBN: 9781859573617
GB: 80
US: $144
EU: 128
FORMAT: eBOOK
ISBN: 9781859574294
GB: 80
US: $144
EU: 128
ISBN: 9781859573587
GB: 80
US: $144
EU: 128
FORMAT: eBOOK
ISBN: 9781859574270
GB: 80
US: $144
EU: 128
ISBN: 9781847351968
GB: 50
US: $90
EU: 80
FORMAT: Paperback
ISBN: 9781859572580
GB: 50
US: $90
EU: 80
ISBN: 9781859572627
GB: 160
US: $288
EU: 256
FORMAT: Paperback
ISBN: 9781859574409
GB: 100
US: $180
EU: 160
FORMAT: eBOOK
ISBN: 9781847351937
GB: 160
US: $288
EU: 256
ISBN: 9781847350978
GB: 85
US: $153
EU: 136
FORMAT: eBOOK
ISBN: 9781847358790
GB: 85
US: $153
EU: 136
50:
FORMAT: eBOOK
ISBN: 9781847350398
GB: 95
US: $171
EU: 152
FORMAT: Paperback
ISBN: 9781859574904
GB: 95
US: $171
EU: 152
ISBN: 9781847351050
GB: 100
US: $180
EU: 160
FORMAT: Hardback
ISBN: 9781847351067
GB: 125
US: $225
EU: 200
FORMAT: eBOOK
ISBN: 9781847351074
GB: 125
US: $225
EU: 200
ISBN: 9781859573068
GB: 80
US: $144
EU: 128
FORMAT: eBOOK
ISBN: 9781859574164
GB: 80
US: $144
EU: 128
Tyre Recycling
PUBLICATION DATE: 2004
FORMAT: Paperback
ISBN: 9781859574898
GB: 85
US: $153
EU: 136
FORMAT: eBOOK
ISBN: 9781847352064
GB: 85
US: $153
EU: 136
ISBN: 9781847352095
GB: 75
US: $135
EU: 120
FORMAT: Hardback
ISBN: 9781847352088
GB: 75
US: $135
EU: 120
ISBN: 9781847354082
GB: 75
US: $125
EU: 95
FORMAT: eBOOK
ISBN: 9781847354099
GB: 75
US: $125
EU: 95
:51
ISBN: 9781847354495
GB: 45
US: $75
EU: 55
FORMAT: Paperback
ISBN: 9781847354501
GB: 25
US: $40
EU: 30
FORMAT: eBOOK
ISBN: 9781847354518
GB: 45
US: $75
EU: 55
ISBN: 9781847350558
GB: 95
US: $171
EU: 152
FORMAT: Hardback
ISBN: 9781847350565
GB: 120
US: $216
EU: 192
FORMAT: eBOOK
ISBN: 9781847350572
GB: 120
US: $216
EU: 192
ISBN: 9781859572740
GB: 225
US: $405
EU: 360
FORMAT: eBOOK
ISBN: 9781859573488
GB: 225
US: $405
EU: 360
ISBN: 9781859572641
GB: 225
US: $405
EU: 360
FORMAT: eBOOK
ISBN: 9781859573495
GB: 225
US: $405
EU: 360
Analysis of Plastics
PUBLICATION DATE: 2002
FORMAT: Paperback
ISBN: 9781859573334
GB: 80
US: $144
EU: 128
FORMAT: eBOOK
ISBN: 9781859574256
GB: 80
US: $144
EU: 128
ISBN: 9781859573907
GB: 85
US: $153
EU: 136
FORMAT: eBOOK
ISBN: 9781847351814
GB: 85
US: $153
EU: 136
ISBN: 9781847351289
GB: 150
US: $270
EU: 240
FORMAT: Hardback
ISBN: 9781847351326
GB: 200
US: $360
EU: 320
FORMAT: eBOOK
ISBN: 9781847351272
GB: 200
US: $360
EU: 320
52:
FORMAT: Paperback
ISBN: 9781847351289
GB: 150
US: $270
EU: 240
FORMAT: Hardback
ISBN: 9781847351326
GB: 200
US: $360
EU: 320
FORMAT: eBOOK
ISBN: 9781847351272
GB: 200
US: $360
EU: 320
ISBN: 9781847351258
GB: 100
US: $180
EU: 160
FORMAT: Hardback
ISBN: 9781847351265
GB: 125
US: $225
EU: 200
FORMAT: eBOOK
ISBN: 9781847351272
GB: 125
US: $225
EU: 200
ISBN: 9781847354839
GB: 100
US: $165
EU: 125
FORMAT: eBOOK
ISBN: 9781847354846
GB: 130
US: $215
EU: 165
FORMAT: Hardback
ISBN: 9781847354822
GB: 130
US: $215
EU: 165
ISBN: 9781847354587
GB: 75
US: $135
EU: 120
FORMAT: Hardback
ISBN: 9781847354570
GB: 75
US: $135
EU: 120
ISBN: 9781847350893
GB: 85
US: $153
EU: 136
ISBN: 9781847350008
GB: 100
US: $180
EU: 160
FORMAT: Hardback
ISBN: 9781847350220
GB: 125
US: $225
EU: 200
ISBN: 9781847350367
GB: 125
US: $225
EU: 200
ISBN: 9781859572689
GB: 70
US: $126
EU: 112
ISBN: 9781859575178
GB: 150
US: $270
EU: 240
FORMAT: eBOOK
ISBN: 9781847351883
GB: 150
US: $270
EU: 240
ISBN: 9781859572665
GB: 80
US: $144
EU: 128
:53
ISBN: 9781859572719
GB: 80
US: $144
EU: 128
ISBN: 9781859573242
GB: 80
US: $108
EU: 128
FORMAT: eBOOK
ISBN: 9781847351586
GB: 80
US: $108
EU: 128
ISBN: 9781859572849
GB: 80
US: $144
EU: 128
FORMAT: eBOOK
ISBN: 9781859574102
GB: 80
US: $144
EU: 128
ISBN: 9781847353863
GB: 130
US: $230
EU: 200
FORMAT: Hardback
ISBN: 9781847353849
GB: 130
US: $230
EU: 200
FORMAT: Paperback
ISBN: 9781847353856
GB: 100
US: $180
EU: 160
ISBN: 9781859573501
GB: 225
US: $405
EU: 360
FORMAT: Paperback
ISBN: 9781859572092
GB: 225
US: $405
EU: 360
ISBN: 9781847351449
GB: 125
US: $225
EU: 200
FORMAT: Paperback
ISBN: 9781847351425
GB: 100
US: $180
EU: 160
FORMAT: Hardback
ISBN: 9781847351432
GB: 125
US: $225
EU: 200
ISBN: 9781859574928
GB: 110
US: $198
EU: 176
FORMAT: Hardback
ISBN: 9781859575093
GB: 165
US: $297
EU: 264
FORMAT: eBOOK
ISBN: 9781847350251
GB: 165
US: $297
EU: 264
GB: 90
US: $162
EU: 88
54:
ISBN: 9781859572504
ISBN: 9781859573723
GB: 100
US: $180
EU: 160
FORMAT: eBOOK
ISBN: 9781847354891
GB: 100
US: $180
EU: 160
ISBN: 9781847354440
GB: 75
US: $125
EU: 95
FORMAT: Paperback
ISBN: 9781847354457
GB: 50
US: $80
EU: 65
FORMAT: eBOOK
ISBN: 9781847354464
GB: 75
US: $125
EU: 95
ISBN: 9781859573532
GB: 185
US: $333
EU: 296
FORMAT: Hardback
ISBN: 9781859573129
GB: 185
US: $333
EU: 296
ISBN: 9781859572603
GB: 80
US: $144
EU: 128
FORMAT: eBOOK
ISBN: 9781859573525
GB: 80
US: $144
EU: 128
US: $153
EU: 136
ISBN: 9781859574720
GB: 85
ISBN: 9781847350244
GB: 220
US: $396
EU: 352
ISBN: 9781847350237
GB: 220
US: $396
EU: 352
ISBN: 9781859574157
GB: 80
US: $144
EU: 128
FORMAT: Paperback
ISBN: 9781859573051
GB: 80
US: $144
EU: 128
ISBN: 9781859574232
GB: 80
US: $144
EU: 128
FORMAT: Paperback
ISBN: 9781859573303
GB: 80
US: $144
EU: 128
:55
ISBN: 9781859572726
GB: 80
US: $144
EU: 128
ISBN: 9781847351647
GB: 165
US: $216
EU: 264
FORMAT: Hardback
ISBN: 9781859572801
GB: 165
US: $216
EU: 264
ISBN: 9781847353740
GB: 50
US: $90
EU: 80
FORMAT: eBOOK
ISBN: 9781847354136
GB: 50
US: $90
EU: 80
ISBN: 9781859572481
GB: 80
US: $144
EU: 128
ISBN: 9781847351029
GB: 125
US: $205
EU: 155
FORMAT: Hardback
ISBN: 9781847351036
GB: 160
US: $265
EU: 200
FORMAT: eBOOK
ISBN: 9781847351043
GB: 160
US: $265
EU: 200
ISBN: 9781859574980
GB: 80
US: $144
EU: 128
FORMAT: eBOOK
ISBN: 9781847350381
GB: 80
US: $144
EU: 128
ISBN: 9781847351128
GB: 75
US: $135
EU: 120
FORMAT: eBOOK
ISBN: 9781847351135
GB: 75
US: $135
EU: 120
56:
FORMAT: Hardback
ISBN: 9781847354716
GB: 120
US: $200
EU: 150
FORMAT: Paperback
ISBN: 9781847354723
GB: 100
US: $165
EU: 125
ISBN: 9781859573235
GB: 80
US: $144
EU: 128
FORMAT: eBOOK
ISBN: 9781859574195
GB: 80
US: $144
EU: 128
Adhesion to Fluoropolymers
PUBLICATION DATE: 2005
FORMAT: Paperback
ISBN: 9781859575246
GB: 85
US: $153
EU: 136
FORMAT: eBOOK
ISBN: 9781847350305
GB: 85
US: $153
EU: 136
ISBN: 9781859572832
GB: 80
US: $144
EU: 128
FORMAT: eBOOK
ISBN: 9781859574096
GB: 80
US: $144
EU: 128
ISBN: 9781859574447
GB: 75
US: $135
EU: 120
FORMAT: eBOOK
ISBN: 9781847351913
GB: 75
US: $135
EU: 144
US: $180
EU: 160
ISBN: 9781859575352
GB: 100
ISBN: 9781847352057
GB: 85
US: $153
EU: 136
FORMAT: Paperback
ISBN: 9781859574959
GB: 85
US: $153
EU: 136
ISBN: 9781847352118
GB: 150
US: $270
EU: 240
FORMAT: Paperback
ISBN: 9781847352125
GB: 125
US: $225
EU: 200
FORMAT: eBOOK
ISBN: 9781847352132
GB: 150
US: $270
EU: 240
ISBN: 9781859573938
GB: 85
US: $153
EU: 136
FORMAT: eBOOK
ISBN: 9781847351876
GB: 85
US: $153
EU: 136
ISBN: 9781859572702
GB: 145
US: $261
EU: 232
FORMAT: eBOOK
ISBN: 9781847352040
GB: 145
US: $261
EU: 232
250383
or contact us directly: 8: cparkinson@smithers.com (: UK: +44 (0)1939 250383
:57
Electrospinning
PUBLICATION DATE: 2009
FORMAT: Paperback
ISBN: 9781847350916
GB: 85
US: $153
EU: 136
FORMAT: eBOOK
ISBN: 9781847350923
GB: 85
US: $153
EU: 136
ISBN: 9781847351456
GB: 75
US: $135
EU: 120
FORMAT: eBOOK
ISBN: 9781847351463
GB: 75
US: $135
EU: 120
ISBN: 9781859573945
GB: 100
US: $180
EU: 160
FORMAT: eBOOK
ISBN: 9781847351739
GB: 100
US: $180
EU: 160
ISBN: 9781859572085
GB: 125
US: $162
EU: 200
FORMAT: eBOOK
ISBN: 9781847351630
GB: 125
US: $162
EU: 200
GB: 100
US: $180
EU: 160
US: $144
EU: 128
ISBN: 9781859573143
ISBN: 9781859573280
GB: 80
ISBN: 9781859571507
GB: 80
US: $144
EU: 128
FORMAT: eBOOK
ISBN: 9781859573426
GB: 80
US: $144
EU: 128
ISBN: 9781847351302
GB: 110
US: $198
EU: 176
FORMAT: Paperback
ISBN: 9781847351296
GB: 90
US: $162
EU: 144
FORMAT: eBOOK
ISBN: 9781847351319
GB: 110
US: $198
EU: 176
Mixing of Rubber
PUBLICATION DATE: 2009
58:
FORMAT: Hardback
ISBN: 9781847351500
GB: 50
US: $90
EU: 80
FORMAT: Paperback
ISBN: 9781847354280
GB: 45
US: $81
EU: 72
FORMAT: eBOOK
ISBN: 9781847351517
GB: 45
US: $81
EU: 72
ISBN: 9781859574966
GB: 85
US: $153
EU: 136
FORMAT: eBOOK
ISBN: 9781847350473
GB: 85
US: $153
EU: 136
ISBN: 9781847350879
GB: 150
US: $270
EU: 240
FORMAT: Paperback
ISBN: 9781847350886
GB: 125
US: $225
EU: 200
FORMAT: eBOOK
ISBN: 9781847351562
GB: 150
US: $270
EU: 240
ISBN: 9781859573570
GB: 80
US: $144
EU: 128
FORMAT: eBOOK
ISBN: 9781859574263
GB: 80
US: $144
EU: 128
ISBN: 9781859573273
GB: 80
US: $144
EU: 128
FORMAT: eBOOK
ISBN: 9781859574218
GB: 80
US: $144
EU: 128
GB: 100
US: $180
EU: 160
ISBN: 9781859574461
ISBN: 9781859574942
GB: 85
US: $153
EU: 136
ISBN: 9781847351388
GB: 50
US: $80
EU: 65
FORMAT: Hardback
ISBN: 9781847351395
GB: 75
US: $125
EU: 95
FORMAT: eBOOK
ISBN: 9781847351401
GB: 75
US: $125
EU: 95
ISBN: 9781859575130
GB: 50
US: $90
EU: 80
FORMAT: eBOOK
ISBN: 9781847350411
GB: 50
US: $90
EU: 80
ISBN: 9781859573877
GB: 50
US: $90
EU: 80
FORMAT: eBOOK
ISBN: 9781847351593
GB: 50
US: $90
EU: 80
:59
Radiation Curing
PUBLICATION DATE: 2001
FORMAT: Paperback
ISBN: 9781859572887
GB: 80
US: $144
EU: 128
FORMAT: eBOOK
ISBN: 9781859574126
GB: 80
US: $144
EU: 128
ISBN: 9781859572511
GB: 55
US: $99
EU: 88
FORMAT: Paperback
ISBN: 9781859573136
GB: 55
US: $99
EU: 88
ISBN: 9781859573266
GB: 80
US: $144
EU: 128
FORMAT: eBOOK
ISBN: 9781859574201
GB: 80
US: $144
EU: 128
ISBN: 9781859571760
GB: 150
US: $270
EU: 240
FORMAT: Hardback
ISBN: 9781859572078
GB: 150
US: $270
EU: 240
FORMAT: Paperback
ISBN: 9781859573983
GB: 100
US: $180
EU: 160
ISBN: 9781859574706
GB: 85
US: $153
EU: 136
FORMAT: eBOOK
ISBN: 9781847352002
GB: 85
US: $153
EU: 136
ISBN: 9781847354075
GB: 75
US: $135
EU: 120
FORMAT: Hardback
ISBN: 9781847354068
GB: 75
US: $135
EU: 120
ISBN: 9781847351371
GB: 75
US: $125
EU: 95
FORMAT: eBOOK
ISBN: 9781847354709
GB: 75
US: $125
EU: 95
60:
ISBN: 9781859572870
GB: 70
US: $90
EU: 112
ISBN: 9781859573747
GB: 70
US: $126
EU: 112
Biodegradable Polymers
PUBLICATION DATE: 2006
FORMAT: Paperback
ISBN: 9781859575192
GB: 300
US: $540
EU: 480
FORMAT: eBOOK
ISBN: 9781847350282
GB: 300
US: $540
EU: 480
GB: 85
US: $153
EU: 136
ISBN: 9781859573860
ISBN: 9781859572412
GB: 255
US: $459
EU: 408
FORMAT: eBOOK
ISBN: 9781847351906
GB: 255
US: $459
EU: 408
ISBN: 9781859575161
GB: 85
US: $153
EU: 136
FORMAT: eBOOK
ISBN: 9781847350299
GB: 85
US: $153
EU: 136
ISBN: 9781847354006
GB: 100
US: $165
EU: 125
FORMAT: Paperback
ISBN: 9781847354013
GB: 80
US: $135
EU: 100
FORMAT: eBOOK
ISBN: 9781847354020
GB: 100
US: $180
EU: 160
US: $180
EU: 160
ISBN: 9781859573259
GB: 100
ISBN: 9781859573013
GB: 80
US: $144
EU: 128
ISBN: 9781847353771
GB: 100
US: $165
EU: 125
FORMAT: Hardback
ISBN: 9781847353795
GB: 120
US: $200
EU: 150
FORMAT: eBOOK
ISBN: 9781847353788
GB: 120
US: $200
EU: 150
250383
or contact us directly: 8: cparkinson@smithers.com (: UK: +44 (0)1939 250383
:61
ISBN: 9781847351548
GB: 50
US: $90
EU: 70
FORMAT: Paperback
ISBN: 9781859572931
GB: 50
US: $90
EU: 80
ISBN: 9781847350787
GB: 50
US: $90
EU: 70
FORMAT: Hardback
ISBN: 9781847350855
GB: 65
US: $117
EU: 91
ISBN: 9781859574324
GB: 80
US: $144
EU: 128
FORMAT: Paperback
ISBN: 9781859573648
GB: 80
US: $144
EU: 128
US: $171
EU: 152
ISBN: 9781859573846
GB: 95
ISBN: 9781847354907
GB: 100
US: $165
EU: 125
FORMAT: eBOOK
ISBN: 9781847355331
GB: 100
US: $165
EU: 125
ISBN: 9781847354914
GB: 100
US: $165
EU: 125
FORMAT: Paperback
ISBN: 9781847355560
GB: 80
US: $135
EU: 100
FORMAT: eBOOK
ISBN: 9781847355577
GB: 100
US: $165
EU: 125
ISBN: 9781859573310
GB: 80
US: $144
EU: 128
FORMAT: eBOOK
ISBN: 9781859574249
GB: 80
US: $144
EU: 128
62:
FORMAT: Paperback
ISBN: 9781847350817
GB: 95
US: $171
EU: 132
FORMAT: Hardback
ISBN: 9781847350824
GB: 110
US: $198
EU: 153
FORMAT: eBOOK
ISBN: 9781847351524
GB: 110
US: $198
EU: 153
REACH 2007
PUBLICATION DATE: 2007
FORMAT: Paperback
ISBN: 9781847350145
GB: 100
US: $180
EU: 160
FORMAT: eBOOK
ISBN: 9781847350619
GB: 100
US: $180
EU: 160
GB: 100
US: $180
EU: 160
ISBN: 9781847350732
ISBN: 9781847353931
GB: 100
US: $180
EU: 160
FORMAT: eBOOK
ISBN: 9781847357625
GB: 100
US: $180
EU: 160
ISBN: 9781847350701
GB: 100
US: $180
EU: 160
FORMAT: eBOOK
ISBN: 9781847351579
GB: 100
US: $180
EU: 160
ISBN: 9781847351524
GB: 100
US: $180
EU: 160
FORMAT: eBOOK
ISBN: 9781847359360
GB: 100
US: $180
EU: 160
ISBN: 9781847354921
GB: 100
US: $180
EU: 160
FORMAT: eBOOK
ISBN: 9781847355492
GB: 100
US: $180
EU: 160
ISBN: 9781859574713
GB: 85
US: $153
EU: 136
FORMAT: eBOOK
ISBN: 9781847352026
GB: 85
US: $153
EU: 136
ISBN: 9781847351470
GB: 75
US: $135
EU: 120
FORMAT: Paperback
ISBN: 9781847351487
GB: 60
US: $108
EU: 96
FORMAT: eBOOK
ISBN: 9781847351494
GB: 75
US: $135
EU: 120
:63
ISBN: 9781859572108
GB: 150
US: $270
EU: 240
FORMAT: Paperback
ISBN: 9781859571743
GB: 175
US: $315
EU: 280
FORMAT: eBOOK
ISBN: 9781847357229
GB: 175
US: $315
EU: 280
Toxicology of Solvents
PUBLICATION DATE: 2002
FORMAT: Hardback
ISBN: 9781859572962
GB: 75
US: $135
EU: 120
FORMAT: eBOOK
ISBN: 9781859573396
GB: 75
US: $135
EU: 120
ISBN: 9781847354259
GB: 75
US: $125
EU: 95
FORMAT: eBOOK
ISBN: 9781847354266
GB: 75
US: $125
EU: 95
64:
FORMAT: Hardback
ISBN: 9781847353948
GB: 75
US: $125
EU: 95
FORMAT: eBOOK
ISBN: 9781847355331
GB: 75
US: $125
EU: 95
Pharmaceutical
ISBN: 9781847355539
GB: 100
US: $165
EU: 125
FORMAT: eBOOK
ISBN: 9781847356123
GB: 100
US: $180
EU: 160
ISBN: 9781847353917
GB: 100
US: $180
EU: 160
FORMAT: eBOOK
ISBN: 9781847357595
GB: 100
US: $180
EU: 160
ISBN: 9781847350688
GB: 100
US: $180
EU: 160
FORMAT: eBOOK
ISBN: 9781847359391
GB: 100
US: $180
EU: 160
ISBN: 9781847354167
GB: 150
US: $250
EU: 190
FORMAT: Paperback
ISBN: 9781847354174
GB: 110
US: $180
EU: 140
FORMAT: eBOOK
ISBN: 9781847354181
GB: 150
US: $250
EU: 190
:65
Research
Journals
Our journals bring together original reviewed articles
from international researchers at theleading edge of
the science, technology and commercial applications
of rubbers and plastics.
Free online access
66:
ResearchJournals
Volume 1
4 issues
Edited by
Dr. Sanjay Palsule
Volume 4
The Journal offers rapid and reliable communication of new basic fundamental results and of experience gained during
development of technology from laboratory to pilot plant to industry and finally into the market. The Journal aims to bridge the gap
between research and development and the practical, commercial applications of polymers in a wide range of industries.
Current developments and likely future trends will be covered across key areas of the composites industry, together with existing
and potential opportunities for the innovative use of composites materials.
ANNUAL POSTAGE:
UK: 40
OVERSEAS: 45
FORMAT: PAPERBACK
ISSN: 2049-6230
4 issues
Edited by
Professor Sigbritt Karlsson,
KTH, Sweden
Volume 21
Editor, Professor Karlsson says Polymers from Renewable Resources is the place for publishing all the exciting new research
and development that strives to make tomorrows sustainable polymeric materials by the replacement of fossil based resources
with renewable ones
ANNUAL POSTAGE:
UK:40.00
OVERSEAS:45.00
FORMAT: PAPERBACK
ISSN:0967-3911
9 issues
Edited by
Professor P Foot,
Kingston University,
UK
The journal is rigorous in accepting papers solely on the basis of novelty and a thorough interpretation of results. Furthermore,in
such a fast-moving fi eld, prompt publication is essential, thus we aim to offer improved and rapid access to new research,
developed at the leading edge of industry and academia.
ANNUAL POSTAGE:
UK:75.00
OVERSEAS:80.00
FORMAT: PAPERBACK
ISSN:0967-3911
:67
ResearchJournals
Volume 29
4 issues
Edited by
Kate Evans,
Smithers Rapra
Volume 40
Areas also covered are all aspects of waste management in the use of polymers
and polymer related products, including:
ANNUAL POSTAGE:
UK:45.00
OVERSEAS:50.00
FORMAT: PAPERBACK
ISSN:0266-7320
12 issues
ANNUAL POSTAGE:
UK:80.00
OVERSEAS:50.00
FORMAT: PAPERBACK
ISSN:0307-174X
Edited by
Kate Evans,
Smithers Rapra
Volume 32
Cellular Polymers
This international peer reviewed journal deals not only with every type of foamed polymer, from elastomeric materials to rigid
plastics, but also raw materials, the manufacturing processes and also application technology.
Cellular Polymers is concerned primarily with the science of foamed materials, the technology and state of the art for processing
and fabricating, the engineering techniques and principles of the machines used to produce them economically, and their
applications in varied and wide ranging uses where they are making an increasingly valuable contribution.
Potential problems for the industry are also covered, including fi re performance of materials, CFC-replacement technology,
recycling and environmental legislation. Reviews of technical and commercial advances in the manufacturing and application
technologies are also included.
6 issues
Edited by
Professor
V. Kumar, University of Washington
68:
Cellular Polymers covers these and other related topics and also pays particular attention to the ways in which the science and
technology of cellular polymers is being developed throughout the world.
ANNUAL POSTAGE:
UK:60.00
OVERSEAS:65.00
FORMAT: PAPERBACK
ISSN:0266-7320
InternationalRepresentation
India, Pakistan,
Sri Lanka and
Bangladesh
Sara Books Pvt Ltd
G-1, Vardaan House,
7/28, Ansari Road, Daryaganj,
New Delhi - 110002.
India
Contact: Ravindra Saxena
United Kingdom
Smithers Rapra Publishing
Shawbury, Shrewsbury,
Shrophire,
SY4 4NR
Contact: Claire Griffiths
Eastern Europe
Books for Eastern Europe
Tindi u. 31.
1047 Budapest,
Hungary
Contact: Dr. Lszl Horvth
(: +36-1-3703614
4: +36-1-3795842
8: booksforeurope@gmail.com
:: www.laszlo-horvath.hu
Mexico, Central
America, South
America, The
Caribbean
Cranbury Associates
7 Clarendon Avenue, Suite 2
Montepelier, VT 05602
Contact: Ethan Atkin
Algeria, Cyprus,
Greece, Jordan,
Malta, Morocco,
Palestine, Tunisia,
Turkey
Avicenna Partnership Ltd
PO Box 484,
Oxford, OX2 9WQ
United Kingdom
Contact: Claire De Gruchy
(: +44 (0)7771 887843
4: +44 (0)1865 882 966
8: claire_degruchy@yahoo.co.uk
Bahrain, Egypt,
Iran, Iraq, Kuwait,
Lebanon, Libya,
Oman, Qatar, Saudi
Arabia, Sudan, Syria,
UAE, Yemen
(: 1 (802) 223-6565
4: 1 (802) 223-6824
8: eatkin@cranburyinternational.com Avicenna Partnership Ltd
PO Box 484,
Oxford, OX2 9WQ
United Kingdom
Contact: Bill Kennedy
:69
UK Office:
Shawbury, Shrewsbury,
Shropshire, SY4 4NR
Tel: +44 (0)1939 250383, Fax: +44 (0)1939 251118