Beruflich Dokumente
Kultur Dokumente
Product overview
VDS 2700 is the video signal transmission system to
transmit video, alarm, audio, RS-485 data and DC
power via One coaxial cable.
VDS 2700 consists of remote unit and local unit
respectively. The remote unit connects to a P/T/Z
(pan/tilt/zoom) camera, the local unit connects to
a monitor in surveillance system. By using intercarrier technology, VDS 2700 provides an innovative
transmission method, simple installation and the
highest quality picture transmitted for CCTV system.
VDS
Alarm Sensor In
INPUT
DC 12V Out
RS485 Port
A
B
COM
Link Out
2700-R Sender
LINK OUT
Power Status
Alarm
Input
Type
Selector
Coaxial Cable
0 to 1,000Meters
use 5C-2V
DC
Power
Supply
LINK IN
LINK FAULT
Warning Devices
POWER / LINK
ON/OFF
2700-L Viewer
OUTPUT
VDS
A B
Video Signal Output
N.C.
C
N.O.
Alarm
Signal
Output
RS485 Network
(Daisy Chain)
Link In
NTSC/PAL to Monitor
DC Power Input
Specification
VDS
2700
Specification ofof
VDS
2700
Specification
Sender,
2700-R Sender(Remote Unit -RU)
Sender, 2700-R Sender(Remote Unit -RU)
Electrical:
Video
Input Signal: 1.0Vpp, 75
Electrical:
Video Input of
Signal:
1.0Vpp,
75 5.5MHz
Bandwidth
Video
Signal:
Bandwidth of Video Signal: 5.5MHz
Audio
Signal:
3.0Vpp,
Audioinput
input Signal:
3.0Vpp,
100K100K,
, Max. Max.
AlarmInput
Input Signal:
N.C./N.O./Terminal
1,000 1,000
Alarm
Signal:
N.C./N.O./Terminal
Power Output:
Output: DC12V,
1.2A,
Max.Max.
Power
DC12V,
1.2A,
RS-485 Data Rate: DC(0bps) to 38Kbps
RS-485 Data Rate: DC(0bps) to 38Kbps
Connection: (PTB= Plugable Terminal Block)
Mechanism:
Dimension: 100.0mm(L) x 75.0mm(W) x 26.75mm(H) Net
Model
Information
Weight:
225gm
VDS 2700 Video, RS-485, Audio and functional Alarm
A B
Electrical:
Electrical:
Video
Output Signal:
Signal: 1.0Vpp,
75 75
Video
Output
1.0Vpp,
Bandwidth of Video Signal: 5.5MHz
Bandwidth
of Video Signal: 5.5MHz
S/N ratio of Video Signal: 50dB
S/NGain
ratio
of Video
Signal:
50dB
of Audio
Output:
0dB 3dB,
600
Bandwidth
of Audio
Signal:
50Hz
to 10KHz
Gain
of Audio
Output:
0dB
3dB,
600
S/N Ratio of Audio Signal: 46dB
Bandwidth
of
Audio
Signal:
50Hz
to
10KHz
RS-485 Data Rate: DC(0bps) to 38Kbps
S/NAlarm
Ratio
of Audio
Signal:
46dB
Output:
N.C./N.O.,
Contact
Rating 1A, 30VDC
DC Power
Input:
40VDC(0bps)
2V
RS-485
Data
Rate:
to 38Kbps
Max. DC power Output: 38V, 1.6A, Min.
Alarm
Output:
N.C./N.O.,
Contact
Rating 1A, 30VDC
Link Fault Output: 0.15A, Min.
DC Power Input: 40V2V
Connection:
(PTB=
Plugable
Terminal
Max.
DC power
Output:
38V,
1.6A,Block)
Min.
Link In: BNC Socket
Link
Fault
Output:
0.15A,
Min.
Link Fault: 3 Pin PTB, 3.5mm Pitch
DC Power Input: 2 Pin PTB, 5.0mm Pitch
VDS 2710
Video, RS-485, Audio and Simple Alarm
Model
Information
EN 55022
Mechanism:
VDS
2720
Video,
Audio
VDS 2700 Video, RS-485
RS-485,and
Audio
and functional Alarm
EN 61000-3
VDS 2730 Video and RS-485
038aa-000en
100.0mm(L) x 75.0mm(W) x2003-Jul-20,
26.75mm(H)
EN 61000-4
VDS 2710 Video, RS-485, Audio and Simple Alarm VDS Dimension:
2 Net Weight: 210gm
VDS 2720 Video, RS-485 and Audio
2003-Oct-15, 038aa-000en
2
VDS 2720 Video and RS-485
Safety recognition of VDS 2700
EN 55022
EN 61000-3
EN 61000-4
Easily
transmit
two video
and two
alarm signals
by connecting 2system
cameras
VDS 2500 Two
videos
with
alarm
signals
transmission
Easily transmit two video and two alarm signals by connecting 2 cameras
This video
signal transmission Unit)
system/is2500-L
design toViewer(Local
transmit two videoUnit)
VDS 2500-R
Sender(Remote
transmit
video
twowhich
alarmwith
signals
by connecting 2 cameras
signals andEasily
two alarm
signalstwo
from
two and
cameras
two alarm
This video
signal
systemcontrol
is design
toby
transmit
twoone
video
signals
sensors
in totransmission
reach the surveillant
zone
using only
coaxial
and two
alarm signals from two cameras which with two alarm sensors in to
cable.
VDSthe
2500-R
Sender(Remote
/ 2500-L
Viewer(Local
Unit)
reach
surveillant
control zone Unit)
by using
only one
coaxial cable.
Features
This video signal transmission system is design to transmit two video
signals and
twovideos
alarmand
signals
from two
cameras
which with
two alarm
Two
two alarm
signals
transmission
channel.
sensors inSending
to reachDC
thepower
surveillant
control zone
by using
only
one coaxial
with 0.8Amp
in reward
from
Viewer
to Sender
cable.
Features reaching to 800M transmission length.
Fig
3. VDS2500
Fig.3
VDS2500Transmission
TransmissionSet
Set
Selecting
NC(Normally
Close)
or
NO(Normally
Open)
or
Features
Two videos and two alarm signals transmission channel.
Terminational type from Input Alarm sensor contact form directly.
Sending DC power with 0.8Amp in reward from Viewer to Sender reaching to 800M transmission length.
Auto
DC
power
supplysignals
systemtransmission
provide stable
and sufficient 12VDC power to camera.
Two videos
and
two alarm
channel.
Selecting
NC(Normally
Close)
or
NO(Normally
Open)
type
fromof
Input
Alarm
sensor conAdvanced
power
supply
system
in
Sender
provides
stable
and sufficient
power
12VDC
to camera.
Sending DC power with 0.8Amp in reward from Vieweror
toTerminational
Sender
tactreaching
form
directly.
Powerful
protection.
While length.
in coaxial link false or misconnection, theFig.3
DC Power
of coaxial
cable which
to 800M
transmission
VDS2500
Transmission
Set
Auto
DCcomes
power
supply
system
provide
and
sufficient
12VDC
power to camera.
from
Viewer
will be
offstable
to prevent
equipments
from damaged.
Selecting
NC(Normally
Close)
orcut
NO(Normally
Open)
or
Terminational
fromsystem
Input Alarm
sensorprovides
contact form
directly.
Advanced
power type
supply
in Sender
stable
and sufficient power of 12VDC to camera.
Auto DC
power supply
system
provide
stable
12VDCthe
power
camera.
Powerful
protection.
While
in coaxial
link
falseand
or sufficient
misconnection,
DC to
Power
of coaxial cable which
Advanced
power
supply
system
in
Sender
provides
stable
and
sufficient
power
of
12VDC
to camera.
comes from Viewer will be cut off to prevent equipments from damaged
Powerful
protection.
While
in
coaxial
link
false
or
misconnection,
the
DC
Power
of
coaxial
which indi When the coaxial lin false happened, the Link Fault warning signal can be conveyed to cable
teh external
comes from Viewer will be cut off to prevent equipments from damaged.
cator of Viewver
Fig.signal
4 VDS2500
Connection
Diagram
Audio
transmission
function equipped
on VDS2510 VDS 2500-R Sender (Remote Unit -RU)
connects with 2 cameras
Link Out
VDS
VDS 2500-R Sender (Remote Unit -RU)
2500-R Sender
Power Status
with 2 cameras
LINK OUT
Alarm Sensor In
Video Signal Input
DC 12V Out
Link
Alarm Out
Input
Type
Selector
VDS
2 Video and 2 Alarm Signals
Camera
No. 1No. 2
Camera
Alarm Sensor In
Coaxial Cable
0 to 800Meters
use 5C-2V
Power Status
LINK OUT
INPUT
Alarm Sensor In
Signal Input
DCVideo
12V Out
Camera No. 2
INPUT
DC 12V Out
2500-R Sender
Alarm
Input
2 Video and 2 Alarm Signals
Type
DC 12V Out
Selector
Coaxial Cable
0 to 800Meters
use 5C-2V
VDS
DC Power to CCD Cameras
DC
Power
Supply
2500-L Viewer
NTSC/PAL to Monitor
System Status
DC
Power
Input
OUTPUT
VDS
2 Video and 2 Alarm Signals
LINK IN
DC
Power
Supply
OUTPUT
LINK IN
System Status
Link In
N.C.
C
N.O.
Alarm
Signal
Output
N.C.
C
N.O.
Alarm
Signal
Output
N.C.
Alarm
Signal
C
Output
N.O.
Video Signal Output
N.C.
Alarm
C
Signal
Output
N.O.
Viewer
VDS2500-L
2500-L
Viewer(Local Unit -LU) connects to
NTSC/PAL to Monitor
a monitor in surveillance system
2 Video and 2 Alarm Signals
DC
Power
Input
3
3
2003-Oct-15, 038aa-000en
Video Signal Output
2003-Oct-15, 038aa-000en
Features
High efficiency
Light weight and small size
Adjustable DC voltage Input
Sufficient and stable DC current out(0.4A)
Remote Unit
VDS 2100/2200 has been used frequently in the surveillance equipment market.
Paab Tekno Trading AB - Box 608, Tingvallastrand 12, 661 29 Sffle, Sweden
Tel: +46 533 150 60 - Fax +46 533 169 31 - info@paab.com - www.paab.com