Beruflich Dokumente
Kultur Dokumente
Tunnel lighting
Front access
Composite material
APPLICATIONS
The PF5 is a luminaire made from a composite material resistant to all types of corrosion, even where the environment is particularly aggressive (high humidity, snow
clearing salts, tunnels through high mountains).
ADVANTAGES
Entirely non-corrodible luminaire.
Reversible protector allowing two types of inclination.
Tightness level: IP 66. Double gasket.
Can be washed with a high pressure jet.
Wide range of reflectors.
The PF5 luminaire offers a wide range of reflectors. It can take up to three optical
compartments simultaneously.
DESCRIPTION
Luminaire made of glass reinforced polyester composed of
two parts: a casing containing the reflector and a reversible
protector. This reversibility enables the PF5 to be installed with
the protector inclined at 0 or 13.
Two closing levers mounted on the sides of the casing give
access to the control gear and the lamp.
A glass with extremely high thermal and mechanical
resistance is sealed into the protector frame.
The tightness of the luminaire (IP 66) - optical compartment
and control gear - is ensured by a double gasket with
chicanes.
OPTIONS
Electrical disconnection when opening the luminaire.
Closing levers in composite material.
Tightness level
IP 66
IK 08 / IK 10
Fire behaviour
0% halogen
Self-quenching
(VO according to UL94)
I or II
Weight (empty)
17,5 kg
The design of the PF5 luminaire provides convenient reversibility of the protector.
Depending on the type of application, it can be inclined either at an angle of 0 or 13.
PF5
REVERSIBILITY OF THE PROTECTOR
Due to the fact that the lower and upper hinges match up, the PF5 protector is reversible. It can either be inclined or lie parallel to the casing. The PF5 with inclined protector is particularly ideal for wall mounted applications. This device removes the necessity of installing the luminaire at an angle.
Two easily dismantled stainless steel axles allow the protector to be reversed. Once the axles have been inserted,
their position is locked.
ELECTRICAL INSTALLATION
Power supply interfacing possibilities:
by compression glands: looped feed possible.
by exit cable and moulded plug (3 or 5 contacts) that can be dismantled.
by a moulded base (3 or 5 contacts) that can be dismantled.
INSTALLATION
Mounting by screws
mm
200
Sta Adap
nda
t
rd = able
646
mm
30 mm
ble
pta rd =
a
Ad nda m
m
a
St 40
4
66 mm
48
0m
m
195 mm
715 mm
545 mm
200 mm
260 mm
DIMENSIONS
480 mm
715 mm
MAINTENANCE
PF5
PHOTOMETRY
Wall mounting
Ceiling
Plafond
Reflector 1289
Reflectors: 2 x 1627
Reflector 1170
Reflector 1548
Applications:
Entrance zone
Applications:
Interior zone
The use of 2*1627 reflectors facilitates
the transition from day to night level by
switching off one light source.
Applications:
Interior zone
Applications:
Entrance zone
Interior zone
210/330
90/270
25/155
90/270
0/180
0/180
90/270
90/270
Reflector 1585
Reflector 1587
Reflector 1516
Reflector 1397
Applications:
Entrance zone
Applications:
Entrance zone
Applications:
Entrance zone
Applications:
Entrance zone
90/270
90/270
90/270
90/270
Ceiling
LAMPS
Reflector 1289
High pressure sodium 150 W
Applications:
Entrance zone
Interior zone
Lamp
High
Pressure
Sodium
20/160
90/270
Reflector
1289
(Sealsafe)(*)
2 or 3 x 1627
(Sealsafe)(*)
1170
1 or 2 x 1548
1585
(Sealsafe)(*)
1587 - 1516
1397
50 W
70 W
100 W
100 W
100 W
100 W
100 W
150 W
150 W
150 W
150 W
150 W
250 W
250 W
250 W
250 W
400 W
400 W
400 W
400 W