Beruflich Dokumente
Kultur Dokumente
A
B
A
A
B
6
7
8
9
10
B
C
D
A
A
11
12
13
14
15
B
B
C
C
A
BAHAGIAN B
1)
16
17
18
19
20
C
D
C
C
E
ANSWER
(ii) Maximum pressure = weight of wooden block / area
tekanan maksimum = berat bungkah kayu / luas
= 75/(5 x 10-2 x 10 x 10-2)
= 1.5 x 104 N m-2.
3)
(a) When an object is partially or fully immersed in a fluid, the object experiences a
buoyant force that is equals to the weight of the fluid displaced.
Bila sebuah objek direndamkan separa atau sepenuhnya dalam cecair, objek itu akan
mengalami julangan yang sama dengan berat cecair yang disesarkan.
(b)(i)
(ii) 20 cm3
(iii) weight of block of wood
berat bungkah kayu
= (48 x 10-6)(800)(10) = 0.384 N
(iv) buoyant force/julangan = weight of wood = 0.384 N
BAHAGIAN C
1)
(i) rate of wear and tear low so that the brake shoe can last longer. Melting
point high so that the brake shoe doesnt soften when in use. Coefficient of
friction high so that the braking is effective. Specific heat capacity high so
that the temperature of the brake show will not increase dramatically.
ANSWER
haus dan lusus - boleh tahan haus dan lusuh - supaya brek dapat tahan lebih
lama. Takat lebur - tinggi - supaya kasut brek tidak akan jadi lembut bila
digunakan. Koefisien geseran - tinggi - supaya kesan membrek adalan tinggi.
Muatan haba tentu - rendah - tinggi - supaya suhu tidak ajan naik dengan cepat.
(ii) Material Q because its rate of wear and tear is low, its melting point is high, its
coefficient of friction is high and it have a high specific heat capacity.
Bahan Q kerana kadar haus dan lusuh adalah rendah, takat leburnya tinggi,
koefifien geserannya tinggi dan muatan haba tentunya tinggi.