Beruflich Dokumente
Kultur Dokumente
Basic Design
Contents
Page
Change Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Verify Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Tribon M3 SP2
ii
Tribon M3 SP2
Description
The Section Modulus function has been improved in the following ways:
Individual items are presented in a dialogue, allowing the user to add individual factors
on each item.
Changed factors are stored with the view (in the drawing) and applied the next time a
calculation is made.
The neutral line and the summary of the calculations are presented in the drawing. The
presented information can be shown or hidden using the function:
Planar > View > Properties.
The results are presented in a CSV file accessible via the Job Launcher. Use the rightbutton (SendTo) to display or print the result file.
Benefits
Compatibility Constraints
None.
Affected Programs
Basic Design.
Tribon M3 SP2
Change Block
Description
The Rename Panel function in Basic Design is updated to allow the user to also change
block and functional description of an existing panel.
Benefits
The function makes it possible to easily change the block definition of an existing panel.
Compatibility Constraints
None.
Affected Programs
Basic Design.
Tribon M3 SP2
Description
A new function is implemented that generates blocks from data defined in a commaseparated file. The function can be activated via Basic Design using the function Project >
Block > Create and Options or from the Hull menu in the Job Launcher using entry Hull
Block Create.
Benefits
The function simplifies the creation of many blocks.
Compatibility Constraints
None.
Affected Programs
Basic Design
Tribon M3 SP2
Verify Model
Description
The function Verify Model investigates a model and reports in a log file potential problems
related to the topological dependencies.
The function should be executed prior to operations like Block Splitting and any reported
problems shall be corrected.
The function is available from the Project menu in Basic Design
Benefits
The function simplifies the maintenance of a correct model.
Compatibility Constraints
None.
See Tribon Basic Design / Functions in the Project Menu / Verify Model.
Affected Programs
Basic Design
Tribon M3 SP2