Beruflich Dokumente
Kultur Dokumente
The value of an ULTRA sampler in your studio or live rig has just gone through the roof!
Once you add the RFX-32 upgrade to your ULTRA sampler, you can apply effects to the
audio coming into the stereo sampling input jacks through the RFX. You can also use the
AES/EBU stereo digital input [optional (model# 6862) for E5000/6400]. On top of that,
two more upgrades can be installed for additional inputs; the 24-BIT - 4 ANALOG
INPUT option (model# 6868) and the 24-BIT - 8 INPUT/16 OUTPUT ADAT option
(model# 6866). With both options added, your sampler has...16 inputs! Now why would a
sampler need 16 inputs?...Thanks for asking!
Now, you can input 16 audio sources (as 8 stereo pairs), each pair routed to an
independent RFX Bus! Think of the possibilities:
"How To Do It" in-depth tutorial covering every button press and edit.
PREPARATIONS: Start with an empty bank in your sampler, MASTER button, F2
(Bank), F1 (Erase), and F6 (Ok). Connect an audio source (Guitar, Bass, CD player, etc.)
to the stereo sampling input jacks of the sampler. Next we'll check/set the gain level:
Press the Sample MANAGE button, then F3 (New). Make sure that the SOURCE setting
(upper right) is Analog (22,44 or 48 kHz-unimportant), and that MONITOR setting
(lower left) is ON. Play audio and check the level meter. Cursor to ADC Gain at the
bottom of the screen and dial a boost (or cut) so that input will meter about 2/3rds of the
way. Now we're ready to begin.
The Processes Involved
Here are the steps we'll be covering in-depth:
1.
2.
3.
4.