Beruflich Dokumente
Kultur Dokumente
CONTENTS:
CTS JG TWIST & LOCK
FITTINGS
p12-17
BRASS FITTINGS
p18
NEW
p21-24
NEW
p25-26
NEW
p27
POLYPROPYLENE FITTINGS
p31-36
POLYPROPYLENE VALVES
p37-39
ACCESSORIES
p40
POTABLE WATER
SINGLE PACK FITTINGS
NEW
p41-43
LLDPE TUBING
NEW
p44-45
NEW
p46
POTABLE WATER
TECHNICAL CHECKLIST
p47
3.
Worldwide Connections
The John Guest Group has a long established reputation as a world
leading manufacturer of Push-fit fittings, tube and other fluid control
products. A reputation built on producing consistently high quality
products with an ongoing commitment to value engineering and
product development.
Quality Manufacture
Both design and manufacture are carried out in John Guests modern,
purpose-built facilities in the United Kingdom.
Maintaining control over the entire process - from initial tool design and
tool-making to final assembly and testing - ensures that only products
of the highest quality are produced.
It is this commitment to quality that has resulted in the Company
receiving prestigious awards from many of the worlds leading testing
and approvals organizations.
John Guest is a preferred supplier to many international companies.
4.
www.jgspeedfit.com
5.
PERFORMANCE BENEFITS:
No blowtorch required
A permanent leak-proof connection
Lower thermal diffusivity maintains safer surface temperature
Pipe elasticity can reduce the possibility of bursting under
freezing conditions
Lead free
Less noise from water flow and expansion/contraction
Long pipe lengths require fewer fittings
INSTALLATION BENEFITS:
6.
SPECIAL APPLICATIONS:
Boats: The flexibility of the Speedfit System ensures it can be cabled
easily around the interior and hidden from view.
RV: Speedfit is ideal for RV installations due to its flexibility and its
resistance to corrosion and freezing.
Exhibitions: The unique ability of the Speedfit System to be easily
disassembled and reused, together with its flexibility, makes Speedfit ideal
for this application.
Portable Buildings (offices, bathrooms): As with RVs, Speedfit is well
suited for these applications.
Agricultural and Horticultural: Speedfit has many applications in
agricultural and horticultural environments.
www.jgspeedfit.com
7.
Max. Working
Pressure
Max. Working
Temperature
Water
160 psi
73F
Water
100 psi
180F
Water
80 psi
200F
WARRANTY:
As a result of long-term testing programs and rigorous quality standards
John Guest USA offers a 25-year warranty against defects in materials or
manufacturing of PEI, MWI, and PSEI ranges of plumbing fittings, and
Speedfit Pipe manufactured by John Guest.
John Guest Plumbing Products are for use with normal domestic
plumbing systems and supplied in accordance with our terms and
conditions of sale.
8.
C
IAPMO UNIFORM
PLUMBING CODE
ESR-1931
PMG-1033
pw rfh
US
NSF 14
NSF 61
www.jgspeedfit.com
9.
Main O-ring
John Guest Twist & Lock Fittings have a collet with stainless steel
teeth that grip the pipe when fully inserted, and an O-ring to provide a
permanent leak-proof seal. The additional benefit of the JG Twist & Lock
fitting is that a twist of the screw-cap gives greater compression on the Oring seal and locks the pipe in place for greater security.
Pipe Cutter
JGHDC
To prevent damage to the O-ring remove all burrs and sharp edges. When
using Speedfit or other types of PEX Pipe, we recommend the use of
Pipe Inserts.
Pipe Stop
O-ring
Collet
Spacer
www.jgspeedfit.com
Push the pipe into the fitting and up to the pipe stop.
No Gap (locked)
Twist the screw-cap until it touches the body flange. This locks the pipe
into position and increases the O-ring seal around the pipe.
Pull to check that it is secure. It is good practice to test the system prior
to leaving the site or before use. Our recommended test procedure is
shown in our Technical Checklist.
TO DISCONNECT:
Ensure that the system is depressurized.
The fitting can be used again without the need for replacement parts.
(Ensure the fitting is clean before every use).
WHAT NOT TO DO
www.jgspeedfit.com
11.
pw rfh
C
IAPMO UNIFORM
PLUMBING CODE
ESR-1931
PMG-1033
US
NSF 14
NSF 61
The PEI Range of JG Twist & Lock Fittings is offered in 1/2, 3/4 and 1
CTS sizes. The fittings are manufactured from high quality engineered
plastic with EPDM O-Rings. Speedfit Push-in System is suitable for hot
and cold water plumbing applications.
Refer to pages 27 for detailed technical specifications.
Prices subject to change without notice.
TEE
PART NO.
SIZE
CTS
BAG
QTY
BOX
QTY
PEI0220
PEI0228
PEI0236
1/2
3/4
1
5
2
1
25
10
5
PART NO.
SIZE
CTS
BAG
QTY
BOX
QTY
PEI0320
PEI0328
PEI0336
1/2
3/4
1
5
5
1
40
20
10
PART NO.
SIZE
CTS
BAG
QTY
BOX
QTY
3/4 x 1/2
1" x 3/4"
5
1
25
10
ELBOW
REDUCING ELBOW
NEW
12.
PEI212820
PEI213628
www.jgspeedfit.com
COUPLER
PART NO.
SIZE
CTS
BAG
QTY
BOX
QTY
PEI0420
PEI0428
PEI0436
1/2
3/4
1
5
5
1
40
25
15
PART NO.
SIZE
STEM x CTS
BAG
QTY
BOX
QTY
PEI062820
PEI063628
3/4 x 1/2
1 x 3/4
10
5
50
30
SIZE
CTS
BAG
QTY
BOX
QTY
3/4 x 1/2
1 x 3/4
5
5
30
15
PART NO.
SIZE
STEM x CTS
BAG
QTY
BOX
QTY
PEI222020
PEI222828
1/2 x 1/2
3/4 x 3/4
10
5
60
25
REDUCER
REDUCING COUPLER
PART NO.
PEI202820
PEI203628
STEM ELBOW
www.jgspeedfit.com
13.
UP
pw rfh
C
IAPMO UNIFORM
PLUMBING CODE
ESR-1931
PMG-1033
NEW
PART NO.
SIZE
CTS
BAG
QTY
BOX
QTY
PEI3028A
PEI3028B
PEI3028C
PEI3028D
PEI3036A
5
5
5
5
1
15
20
20
15
10
2
3
STACKABLE TEE
PART NO.
PEI532020
PEI532820
PEI532828
14.
www.jgspeedfit.com
SIZE
CTS
BAG
QTY
BOX
QTY
5
5
1
30
20
15
US
NSF 14
NSF 61
pw rfh
SIZE
CTS
BAG
QTY
BOX
QTY
1/2SCP
3/4SCP
1/2
3/4
1
1
5
5
SIZE
CTS
BAG
QTY
BOX
QTY
1/2TKP
3/4TKP
1/2
3/4
1
1
5
5
NEW
PART NO.
SIZE
BAG
QTY
BOX
QTY
PSEI4620
PSEI4628
PEI4636
1/2
3/4
1
10
5
5
150
80
30
PSEI4620B (Blue)
PSEI4620R (Red)
PSEI4628B (Blue)
PSE14628R (Red)
1/2
1/2
3/4
3/4"
10
10
5
5
150
150
80
80
The unique feature of the Speedfit concept is the ability to easily connect and disconnect the End
Cap. End Caps also provide a leak-proof seal.
They can be used to temporarily cap-off installations for pressure testing and rough
inspections.
With Speedfit End Caps there is no need for tools, sweating or threading. They can be used
with plastic or copper pipe, and when new are reusable many times over.
EASY TO CONNECT
EASY TO DISCONNECT
www.jgspeedfit.com
15.
UP
pw rfh
C
IAPMO UNIFORM
PLUMBING CODE
ESR-1931
PMG-1033
US
SIZE
CTS x NPS
BAG
QTY
BOX
QTY
PEISTC2034
1/2 x 1/2
10
50
SIZE
CTS x NPS
BAG
QTY
BOX
QTY
PEIBTC2034
1/2 x 1/2
10
50
BAG
QTY
BOX
QTY
10
50
BAG
QTY
BOX
QTY
10
50
SIZE
CTS x UNS
SIZE
CTS x UNS
www.jgspeedfit.com
pw rfh
C
IAPMO UNIFORM
PLUMBING CODE
ESR-1931
PMG-1033
US
MALE CONNECTOR
PART NO.
SIZE
CTS x NPT
BAG
QTY
BOX
QTY
PSEI012024
1/2 x 1/2
10
80
PSEI012026
1/2 x 3/4
5
60
PSEI012826
3/4 x 3/4
5
50
PSEI013626
1 x 3/4
2
30
PSEI013628
1 x 1
2
20
Only to be used with mating plastic threads.
FEMALE CONNECTOR
PART NO.
SIZE
CTS x NPS
BAG
QTY
BOX
QTY
PSEI452826
PEI452034
3/4 x 3/4
1/2 x 1/2
5
5
40
50
SIZE
CTS x NPT
BAG
QTY
BOX
QTY
PSEI482024
1/2 x 1/2
5
60
Only to be used with mating plastic threads.
SHUT-OFF VALVE
PART NO.
SIZE
CTS
BAG
QTY
BOX
QTY
PSEISV20P
PSEISV28P
1/2"
3/4"
1
1
100
75
1/4 Turn Valves. These valves have been designed to allow temporary servicing of
downstream equipment and must only be used in the fully open or fully closed position.
DO NOT USE THESE VALVES:
In a partially open position to control flow.
To provide a permanent termination.
Without tubing assembled or plugged (or threaded connections sealed).
As a tap or faucet.
www.jgspeedfit.com
17
pw rfh
C
IAPMO UNIFORM
PLUMBING CODE
ESR-1931
PMG-1033
US
SIZE
CTS x NPT
BAG
QTY
BOX
QTY
MWI012024LF
MWI012026LF
MWI012826LF
1/2 x 1/2
1/2 x 3/4
3/4 x 3/4
5
5
5
100
100
50
PART NO.
SIZE
CTS x NPT
BAG
QTY
BOX
QTY
MWI052024LF
MWI052826LF
1/2 x 1/2
3/4 x 3/4
10
1
100
40
PART NO.
SIZE
CTS x NPT
BAG
QTY
BOX
QTY
WBI2024
1/2 x 1/2
20
STANDARD BRASS
WING BACK ELBOW
18
www.jgspeedfit.com
pw rfh
C
IAPMO UNIFORM
PLUMBING CODE
ESR-1931
PMG-1033
US
NSF 14
NSF 61
SIZE
CTS x FEET
BOX
QTY
US1/2PEX-100F-W
US3/4PEX-100F-W
1/2 x 100
3/4 x 100
1
1
PART NO.
SIZE
CTS
BUNDLES
US1/2PEX-10x10-W
US3/4PEX-10x10-W
US1PEX-10x10-W
1/2
3/4
1
1
1
1
Bundles of ten 10-foot lengths. W denotes white color pipe. Red and Blue pipe
available at the same price as white, use suffix R or B.
PIPE INSERT
PART NO.
SIZE
CTS
BAG
QTY
BOX
QTY
TSI20
TSI28
TSI36
1/2
3/4
1
50
25
10
500
250
150
www.jgspeedfit.com
19
ACCESSORIES
Products on this page are not listed with IAPMO.
NAIL CLIP
PART NO.
SIZE
CTS
BAG
QTY
BOX
QTY
NPCI20
NPCI28
1/2
3/4
50
50
400
250
PART NO.
PIPE CLIP
SIZE
CTS
BAG
QTY
BOX
QTY
USCLIP20
USCLIP28
USCLIP36
1/2
3/4
1
50
50
20
200
100
80
50
400
SIZE
CTS
BAG
QTY
BOX
QTY
30
SIZE
CTS
BAG
QTY
BOX
QTY
1
1
20
50
PCSW
PIPE CUTTER
PART NO.
JG-TS
JG HDC
BLADE JGHDC
20
www.jgspeedfit.com
pw rfh
C
IAPMO UNIFORM
PLUMBING CODE
NEW
ESR-1931
PMG-1033
US
NSF 14
NSF 61
SINGLE-PACKED
System Benefits:
No Tools Required
Ziploc Bags
ED
SI
N
G
LE
-P
AC
K
TEE
PART NO.
SIZE
CTS
BAG
QTY
PEI0220P
PEI0228P
1/2
3/4
1
1
PART NO.
SIZE
CTS
BAG
QTY
PEI0320P
PEI0328P
1/2
3/4
1
1
PART NO.
SIZE
CTS
BAG
QTY
3/4 x 1/2
ELBOW
REDUCING ELBOW
PEI212820P
www.jgspeedfit.com
21
NEW
COUPLER
PART NO.
SIZE
CTS
BAG
QTY
PEI0420P
PEI0428P
1/2
3/4
1
1
REDUCER
PART NO.
SIZE
BAG
STEM x CTS QTY
PEI062820P
3/4 x 1/2
ED
REDUCING COUPLER
SIZE
CTS
BAG
QTY
SI
N
G
LE
-P
AC
K
PART NO.
PEI202820P
3/4 x 1/2 1
PART NO.
SIZE
CTS
BAG
QTY
1/2TKP
3/4TKP
1/2
3/4
1
1
SIZE
CTS
BAG
QTY
1/2SCP
3/4SCP
1/2
3/4
1
1
REDUCING TEE
PART NO.
PEI3028AP
22
www.jgspeedfit.com
SIZE
CTS
BAG
QTY
x x
NEW
SIZE
CTS x NPS
BAG
QTY
PEIBTC2034P
1/2 x 1/2
SIZE
CTS x NPS
BAG
QTY
1/2
PART NO.
PEISTC2034P
ED
SIZE
CTS
BAG
QTY
1/2
3/4
1
1
LE
-P
AC
K
PART NO.
PSEI4620P
PSEI4628P
PIPE INSERT
PART NO.
SIZE
CTS
BAG
QTY
TSI20P
TSI28P
1/2
3/4
10
5
JG SPEEDFIT PIPE
SI
N
G
SINGLE-PACKED
PEX PIPE
PART NO.
SIZE
CTS x FEET
BOX
QTY
US1/2PEX-100F-W
US3/4PEX-100F-W
1/2 x 100
3/4 x 100
1
1
SIZE
CTS
BUNDLES
US1/2PEX-10x10-W
US3/4PEX-10x10-W
US1PEX-10x10-W
1/2
3/4
1
1
1
1
www.jgspeedfit.com
23
NEW
MALE CONNECTOR
PART NO.
SIZE
CTS x NPT
BAG
QTY
PSEI012024P
PSEI012026P
PSEI012826P
1/2 x 1/2
1/2 x 3/4
3/4 x 3/4
1
1
1
PART NO.
SIZE
CTS x NPS
BAG
QTY
PSEI452826P
3/4 x 3/4
ED
FEMALE CONNECTOR
SIZE
CTS x NPT
BAG
QTY
PSEI482024P
1/2 x 1/2
PART NO.
SIZE
CTS x CTS
BAG
QTY
1/2
3/4
1
1
SI
N
G
LE
-P
AC
K
PART NO.
SHUT-OFF VALVE
PSEISV20P
PSEISV28P
Firm 1/4 turn handle, prevents unwanted movement. These valves have been designed to allow
temporary servicing of downstream equipment and must only be used in the fully open or
fully closed position.
DO NOT USE THESE VALVES:
In a partially open position to control flow.
To provide a permanent termination.
Without tubing assembled or plugged (or threaded connections sealed).
As a tap or faucet.
NEW
FLEXI HOSE
PART NO.
SIZE
BAG
QTY
24
www.jgspeedfit.com
NEW
IAPMO UNIFORM
PLUMBING CODE
Free nt
NEW
Lead
ista
pw rfh
ESR-1931
PMG-1033
es
UV R
US
The Black PEI Range of Twist & Lock Fittings is offered in and 1 CTS
sizes. They have been specifically designed for Water Filtration/Softener
Installs; however, they are also suitable for Marine and R.V applications.
The fittings are manufactured from high quality engineered plastic with
EPDM O-rings. Speedfit Push-in
Working Pressures
system is suitable for hot and
and Temperatures:
cold water plumbing applications.
Application: Water
Max. Pressure
160 psi
100 psi
80 psi
Max. Temperature
73F
180F
200F
COUPLER
PART NO.
SIZE
CTS
BAG
QTY
BOX
QTY
PEI0428E
PEI0436E
3/4
1
5
1
25
15
SIZE
STEM x CTS
BAG
QTY
BOX
QTY
PEI0328E
PEI0336E
3/4
1
5
1
20
10
PART NO.
SIZE
CTS
BAG
QTY
BOX
QTY
PEI0228E
PEI0236E
3/4
1
2
5
10
5
ELBOW
PART NO.
TEE
NEW
PLUG IN ELBOW
PART NO.
SIZE
CTS x STEM
BAG
QTY
BOX
QTY
PEI222828E
PEI223636E
3/4 x 3/4
1 x 1
5
10
25
25
www.jgspeedfit.com
25
PW-G rfh
NEW
ESR # 1931
REDUCER COUPLER
PART NO.
SIZE
CTS
BAG
QTY
BOX
QTY
1 x 3/4
15
PART NO.
SIZE
CTS x NPT
BAG
QTY
BOX
QTY
PSEI012024E
PSEI012026E
PSEI012826E
PSEI013626E
PSEI013628E
1/2 x 1/2
1/2 x 3/4
3/4 x 3/4
1 x 3/4
1 x 1
10
5
5
2
2
80
60
50
30
20
PEI203628E
MALE CONNECTOR
NEW
NEW
NEW
PSEI052826E
PSEI053628E
SIZE
CTS x NPT
STEM MALE
BAG
QTY
BOX
QTY
3/4 x 3/4
1 x 1
1
10
60
40
SIZE
CTS x NPT
BAG
QTY
BOX
QTY
PSEI482024E
1/2 x 1/2
60
NEW
FLEXI HOSE
PART NO.
SIZE
BAG
QTY
26
www.jgspeedfit.com
Technical Checklist
CTS - SPEEDFIT TWIST & LOCK (PEI AND PSEI RANGE)
FOR PRODUCTS LISTED ON PAGES 12-26.
Standards:
products are designed and manufactured under a fully integrated system assessed by B.S.I.
Application
Water
Water
Water
Max. Pressure
160 psi
100 psi
80 psi
Max. Temperature
73 F
180 F
200 F
CPVC or
PEX Pipe will withstand pressures well in
excess of normal service conditions.
Insulation: Comply with code requirements.
Minimum bend radius (PEX):
Pipe Diameter
Min radius
1/2" CTS
7"
3/4" CTS
9"
Clip Spacing
Pipe Diameter
Horizontal Run
Vertical Run
1/2" CTS
16
20
3/4" CTS
20
30
1" CTS
30
36
with
products. Extreme care should be taken to
ensure that no such contact takes place.
Chlorine:
is suitable for use with water supplies
containing up to 4ppm of chlorine.
Exposure to light:
products, when used indoors,
are not affected by sunlight. When used outdoors, protect
from ultraviolet light by lagging or painting.
Pipe clips: Pipe clips should not be
any closer than 2.5
inches from the end of the
Pipe should be adequately
supported by pipe clips to prevent undue stress (side load) on
Pipe inserts: Plumbing: John Guest recommends the use
of pipe inserts for PEX pipe connections with John Guest
system.
Connection to Hot Water Heater: A minimum 18 inches
run of copper pipe must be installed between the hot water
System.
heater and the
Connection to copper pipe: 18 inches is the minimum
distance to make a solder connection on copper pipe inserted
into a
Ensure that no solder comes into
contact with the
Electrical continuity: If
is used in an existing metal
system, electrical continuity must be reinstated.
System testing: To ensure the pipework and
have
been installed correctly, whether it be on a new or extended
system, it is essential that the system be checked and
hydraulically wet tested. Testing should be at 30 psi for 10
minutes and 150 psi for 10 minutes. This testing, combined
with other relevant checks, should reveal installation problems
and is regarded as good plumbing practice. However, system
testing should not be regarded as a substitute for correct
installation (see also Making a Good Connection).
dry surfaces of a
come into contact with
disinfection solution the whole
must be replaced
immediately. The disinfection solution must be immediately
out at all draw out points with fresh, clean water at
the end of the disinfection period. The solution must not be
left in the system.
System flushing: As is usual practice for any plumbing
installation,
of the system prior to the use of
is recommended to remove any contaminants/chemical
residue from elsewhere in the system.
Vermin:
products will need special protection in
vermin infested areas.
Tube insertion depths:
1 CTS
1 5/8
1 1/2
1 1/2
Plastic
Metal
NPT
NPT
www.jgspeedfit.com
27
CONTENTS:
POLYPROPYLENE
FITTINGS
p31-36
POLYPROPYLENE
VALVES
p37-39
ACCESSORIES
p40
POTABLE WATER
SINGLE-PACKED
FITTINGS
NEW
p41-43
LLDPE TUBING
NEW
p44-45
QUICK CONNECT
WATER SUPPLY/
ICE MAKER KIT
NEW
p46
TECHNICAL
CHECKLIST
p47
28
Since 1989
NSF 61
MATERIALS OF CONSTRUCTION
John Guest Fittings are made up of three components:
Bodies are produced in acetal copolymer or polypropylene.
O-rings are produced in EPDM.
Collets are produced in acetal copolymer or polypropylene
with stainless steel teeth.
O-ring provides a
leakproof seal
Collet
www.johnguest.com
29
HOW TO MAKE
A STANDARD CONNECTION
MAKING A GOOD CONNECTION
To make a connection, the tube is simply pushed in by hand; the unique
patented John Guest collet locking system then holds the tube firmly in
place without deforming it or restricting flow.
TO DISCONNECT
Push in collet and remove tube.
30
www.johnguest.com
NSF 61
The PP Range of inch-size push-in fittings is offered for tube sizes 1/4"
O.D. to 1/2" O.D. The fittings are manufactured in white polypropylene with
food grade EPDM O-rings. They have been developed to satisfy the
filtered pure water market and wide range of applications.
Prices subject to change without notice.
The PP Range is NOT suitable for compressed air or heating applications.
Working Pressures and Temperatures
Max.
Max.
Min.
150 psi
60 psi
33F/1C
MALE CONNECTOR
at
at
EA
TM
EN
T
Water
NPTF THREAD
TUBE THREAD
OD
NPTF
TR
PART NO.
W
AT
ER
PP010821W
PP010822W
PP010823W
PP011222W
PP011223W
PP011224W
PP011623W
PP011624W
1/8
1/4
3/8
1/4
3/8
1/2
3/8
1/2
BOX
QTY
10
10
10
10
10
10
10
10
500
400
400
250
250
250
150
150
FO
R
NEW
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
BAG
QTY
UNION TEE
PART NO.
TUBE
OD
BAG
QTY
BOX
QTY
PP0208W
PPM0208W
PP0212W
PP0216W
Blue Collet:
PP0208W-B
1/4
5/16
3/8
1/2
10
10
10
10
300
200
100
80
1/4
10
300
www.johnguest.com
31
UNION ELBOW
TUBE
OD
BAG
QTY
BOX
QTY
PP0308W
PPM0308W
PP0312W
PP0316W
Blue Collet:
PP0308W-B
1/4
5/16
3/8
1/2
10
10
10
10
400
300
200
100
1/4
10
400
UNION CONNECTOR
PART NO.
STEM ADAPTER
W
AT
ER
PART NO.
PP050821W
PP050822W
PP051222W
PP051223W
PP051623W
PP051624W
FO
R
TUBE
OD
BAG
QTY
BOX
QTY
1/4
5/16
3/8
1/2
10
10
10
10
400
300
200
100
TR
PP0408W
PPM0408W
PP0412W
PP0416W
EA
TM
EN
T
PART NO.
NPTF THREAD
STEM THREAD
OD
NPTF
1/4
1/4
3/8
3/8
1/2
1/2
x
x
x
x
x
x
BAG
QTY
BOX
QTY
1/8
1/4
1/4
3/8
3/8
1/2
10
10
10
10
10
10
500
500
300
200
250
200
TUBE
OD
BAG
QTY
BOX
QTY
1/4
3/8
1/4
3/8
1/2
5/16
10
10
10
10
10
10
400
200
200
200
150
400
REDUCER
PART NO.
NEW
32
PP061208W
PP061612W
PP062008W
PP062012W
PP062016W
PP061210W
www.johnguest.com
STEM
OD
3/8
1/2
5/8
5/8
5/8
3/8
PLUG
STEM
OD
BAG
QTY
BOX
QTY
PP0808W
PPM0808W
PP0812W
PP0816W
1/4
5/16
3/8
1/2
10
10
10
10
500
500
400
300
SWIVEL ELBOW
EA
TM
EN
T
PART NO.
NPTF THREAD
PART NO.
W
AT
ER
1/4
1/4
3/8
3/8
x
x
x
x
1/8
1/4
1/4
3/8
BAG
QTY
BOX
QTY
10
10
10
10
300
200
100
100
TR
PP090821W
PP090822W
PP091222W
PP091223W
TUBE THREAD
OD
NPTF
PART NO.
PP100821W
PP100822W
PP101222W
PP101223W
1/4
1/4
3/8
3/8
x
x
x
x
1/8
1/4
1/4
3/8
FO
R
PP110821W
PP110822W
PP111222W
PP111223W
BAG
QTY
BOX
QTY
10
10
10
10
200
200
100
100
NPTF THREAD
TUBE THREAD
OD
NPTF
1/4
1/4
3/8
3/8
x
x
x
x
1/8
1/4
1/4
3/8
BAG
QTY
BOX
QTY
10
10
10
10
200
200
100
100
www.jgspeedfit.com
33
BULKHEAD UNION
PART NO.
TUBE MOUNTING
OD
HOLE
PP1208W
PP1212W
PP1216W
1/4
3/8
1/2
0.67
0.83
1.06
BAG
QTY
BOX
QTY
10
10
5
200
100
50
BOX
QTY
EA
TM
EN
T
PART NO.
NEW
0.83
10
150
TUBE
OD
BAG
QTY
BOX
QTY
1/4
3/8
10
10
250
150
TUBE
OD
BAG
QTY
BOX
QTY
1/4
1/4
3/8
10
10
10
300
200
150
TUBE
OD
BAG
QTY
BOX
QTY
1/4
5/16
1/4
3/8
1/2
10
10
10
10
10
500
400
300
200
150
3/8 - 3/8
10
200
3/8
1/2
W
AT
ER
TR
PP201208W
PP201612W
TUBE
OD
FO
R
REDUCING ELBOW
PART NO.
TUBE
OD
PP211008W
PP211208W
PP211612W
PLUG-IN ELBOW
34
PART NO.
STEM
OD
PP220808W
PPM220808W
PP221208W
PP221212W
PP221616W
Blue Collet
PP221212W-B
1/4
5/16
3/8
3/8
1/2
www.johnguest.com
NEW
TUBE
OD
BAG
QTY
BOX
QTY
3/8
10
150
TUBE OD
OUTLET
BAG
QTY
BOX
QTY
1/4
10
200
HOSE
ID
BAG
QTY
BOX
QTY
3/8
1/2
3/8
1/2
10
10
10
10
400
300
300
250
PP2312W
PART NO.
PP241208W
3/8
STEM
OD
TR
PART NO.
EA
TM
EN
T
NEW
3/8
3/8
1/2
1/2
W
AT
ER
PP251212W
PP251216W
PP251612W
PP251616W
REDUCING TEE
FO
R
PART NO.
NEW
NEW
PP30080812W
PP30120812W
PP30121208W
PP301612W
TUBE
TUBE TUBE OD BAG
OD END OD END BRANCH QTY
1/4
3/8
3/8
1/2
x
x
x
x
1/4
1/4
3/8
1/2
x
x
x
x
3/8
3/8
1/4
3/8
BOX
QTY
10
10
10
10
150
150
150
50
BAG
NPT
TUBE
TUBE
OD END OD END BRANCH QTY
BOX
QTY
10
150
PP641223W
www.johnguest.com
35
UNS THREAD
FAUCET CONNECTOR
PART NO.
TUBE
OD
THREAD
UNS
BAG
QTY
BOX
QTY
10
10
400
300
NPTF THREAD
FEMALE ADAPTER
PART NO.
TUBE
OD
1/4
1/4
3/8
3/8
x
x
x
x
1/8
1/4
1/4
3/8
BAG
QTY
BOX
QTY
10
10
10
10
400
200
200
150
EA
TM
EN
T
PP450821W
PP450822W
PP451222W
PP451223W
THREAD
NPTF
NPTF THREAD
FIXED ELBOW
TUBE
OD
THREAD
NPTF
TR
PART NO.
W
AT
ER
PP480821W
PP480822W
PP480823W
PP481222W
PP481223W
1/4
1/4
1/4
3/8
3/8
x
x
x
x
x
1/8
1/4
3/8
1/4
3/8
BAG
QTY
BOX
QTY
10
10
10
10
10
500
400
300
200
200
BAG
QTY
BOX
QTY
10
150
FO
R
PART NO.
NEW
PP491208W
3/8
1/4
NEW
PP531212W
36
TUBE OD TUBE OD
INLET OUTLET
www.johnguest.com
TUBE
TUBE TUBE OD BAG
OD END OD END BRANCH QTY
10
BOX
QTY
150
150 psi
60 psi
33F/1C
at
at
EA
TM
EN
T
Max.
Max.
Min.
Water
NSF 61
NPTF THREAD
SPEEDFIT TO MALE
PART NO.
TUBE
OD
1/4
3/8
BAG
QTY
BOX
QTY
1/4
3/8
10
10
200
100
x
x
TR
PPSV010822W
PPSV011223W
THREAD
NPTF
SPEEDFIT TO SPEEDFIT
W
AT
ER
PART NO.
PPSV040808W
PPSV041212W
TUBE
OD
BAG
QTY
BOX
QTY
1/4
3/8
10
10
200
80
NPTF THREAD
SPEEDFIT TO FEMALE
FO
R
PART NO.
NEW
TUBE
OD
PPSV500822W
PPSV501223W
THREAD BAG
NPTF QTY
1/4 x 1/4
3/8 x 1/4
10
10
BOX
QTY
200
100
NPTF THREAD
SPEEDFIT TO FEMALE
PART NO.
TUBE
OD
PPSV451223W
THREAD BAG
NPTF QTY
3/8 x 3/8
10
BOX
QTY
1/4 Turn Valves. These valves have been designed to allow temporary servicing of
downstream equipment and must only be used in the fully open or fully closed position.
DO NOT USE THESE VALVES:
In a partially open position to control flow.
To provide a permanent termination.
Without tubing assembled or plugged (or threaded connections sealed).
As a tap or faucet.
www.johnguest.com
37
LEAD
FREE
INCH POLYPROPYLENE
ANGLE STOP ADAPTER VALVES
EA
TM
EN
T
The valves are not to be used with compressed air, explosive gases,
petroleum spirits and other fuels, or for heating systems.
FOR USE WITH COLD WATER SUPPLY ONLY.
NSF 61
Max.
Min.
150 psi
33F/1C
at
TR
Water
THREAD
THREAD
MALE
FEMALE
COMPRESSION COMPRESSION
W
AT
ER
PART NO.
*ASVPP1LF 3/8
*ASVPP2LF 3/8
x
x
FO
R
3/8
3/8
x
x
x
x
BAG
QTY
BOX
QTY
1/4
3/8
1
1
30
30
CONVERSION THREAD
THREAD
THREAD
MALE COMPRESSION
FEMALE NPS
*ASVPP5LF 1/2
*ASVPP6LF 1/2
TUBE
OD
3/8
3/8
x
x
TUBE
OD
BAG
QTY
BOX
QTY
1/4
3/8
1
1
30
30
1/4 Turn Valves. These valves have been designed to allow temporary servicing of
downstream equipment and must only be used in the fully open or fully closed position.
DO NOT USE THESE VALVES:
In a partially open position to control flow.
To provide a permanent termination.
Without tubing assembled or plugged (or threaded connections sealed).
As a tap or faucet.
38
www.johnguest.com
www.johnguest.com
39
ACCESSORIES
TUBE CUTTER
PART NO.
BAG
QTY
BOX
QTY
TSNIP
BLADES ONLY
50
300
1
10
BAG
QTY
BOX
QTY
3/16 to 1/2
1/4, 3/8
50
50
10
10
CLIPS
BAG
QTY
BOX
QTY
1/4
3/8
1/2
100
100
100
5000
1000
2000
8mm
100
8000
ICLT/2
TSPITOOL
LOCKING CLIPS
TR
PART NO.
EA
TM
EN
T
PART NO.
W
AT
ER
PIC1808R
PIC1812R
PIC1816R
Metric
PMC1808R
FO
R
40
www.johnguest.com
NEW
SINGLE-PACKED
NSF 61
System Benefits:
Quick connect and
Disconnect
Easy to use in confined
spaces
No Tools Required
A permanent leak-proof
connection
Plastic products are leadfree and corrosion-free
Strong Branding
Ziploc Bags
ED
SI
N
G
LE
-P
AC
K
NPTF THREAD
PART NO.
SIZE
PP010822WP
PP010823WP
PP011223WP
BAG
QTY
1/4 x 1/4 1
1/4 x 3/8 1
3/8 x 3/8 1
UNION TEE
PART NO.
TUBE
OD
BAG
QTY
PP0208WP
PP0212WP
1/4
3/8
1
1
PART NO.
TUBE
OD
BAG
QTY
PP0308WP
PP0312WP
1/4
3/8
1
1
UNION ELBOW
www.johnguest.com
41
NEW
UNION CONNECTOR
PART NO.
TUBE
OD
BAG
QTY
PP0408WP
PP0412WP
1/4
3/8
1
1
TUBE
OD
BAG
QTY
REDUCING CONNECTOR
PART NO.
REDUCING TEE
SIZE
BAG
QTY
3/8x3/8x1/4
SI
N
G
LE
-P
AC
K
PART NO.
3/8 x 1/4 1
ED
PP201208WP
PP30121208WP
UNS THREAD
FAUCET CONNECTOR
PART NO.
PP3208U7WP
PP3212U7WP
SIZE
BAG
QTY
1/4 x 7/16 1
3/8 x 7/16 1
NEW
REDUCER
PART NO.
PP061208WP
SIZE
3/8 x 1/4 1
NEW
TUBE CUTTER
PART NO.
TSNIP -US
42
BAG
QTY
www.johnguest.com
BAG
QTY
NEW
SINGLE-PACKED
TUBE
OD
BAG
QTY
1/4
3/8
1
1
LE
-P
AC
K
ED
PPSV040808WP
PPSV041212WP
NPTF THREAD
TUBE
OD
THREAD
NPTF
BAG
QTY
1/4
1/4
1
1
THREAD
THREAD
TUBE
MALE
FEMALE
OD
COMPRESSION COMPRESSION
BAG
QTY
PPSV500822WP
PPSV501222WP
1/4
3/8
Lead
Free
SI
N
G
PART NO.
ASVPP1LF
ASVPP2LF
ASVPP5LF
ASVPP6LF
3/8
3/8
1/2"
1/2
x
x
x
x
x
x
3/8
3/8
3/8"
3/8
x
x
x
x
1/4
3/8
1/4"
3/8
1
1
1
1
1/4 Turn Valves. These valves have been designed to allow temporary servicing of
downstream equipment and must only be used in the fully open or fully closed position.
DO NOT USE THESE VALVES:
In a partially open position to control flow.
To provide a permanent termination.
Without tubing assembled or plugged (or threaded connections sealed).
As a tap or faucet.
NEW
PART NO.
PE-08-BI-025F-B
PE-08-BI-025F-N
PE-08-BI-050F-B
PE-08-BI-050F-N
PE-08-BI-100F-B
PE-08-BI-100F-N
1/4
1/4
1/4
1/4
1/4
1/4
PART NO.
25
25
50
50
100
100
1
1
1
1
1
1
20
20
12
12
8
8
BAG
QTY
BOX
QTY
1
1
1
12
12
12
www.johnguest.com
43
NEW
NEW
NEW
PE-08-BI-0500F-N
PE-08-BI-1000F-N*
PE-08-BI-3000F-E
PE-10-CI-0500F-N
PE-12-EI-0500F-N
PE-16-GI-0250F-N
PE-04025-0100M-N
PE-0604-0100M-N
PE-0604-0300H-E
PE-0806-100M-N
PE-1007-100M-N
PE-1209-100M-N
PE-15115-0100M-B
OD
COIL
LENGTH
MINI BEND
RADII
BOX
QTY.
1/4"
1/4"
1/4"
5/16"
3/8"
1/2"
4mm
6mm
6mm
8mm
10mm
12mm
15mm
500 FT
1000 FT
3000 FT
500 FT
500 FT
250 FT
100m
100m
300m
100m
100m
100m
100m
1.00"
1.00"
1.00"
1.13"
1.25"
2.50"
25mm
25mm
25m
30mm
32mm
63mm
100mm
2
1
1
1
1
1
2
2
1
2
1
1
2
COLORS AVAILABLE
SUFFIX
COLOR
Y
G
SIZES
1/4 5/16 3/8 1/2 4mm 6mm 8mm 10mm 12mm 15mm
N NATURAL
W
WHITE
B
BLUE
E
*BLACK
R
RED
O
ORANGE
V
VIOLET
G
GREEN
Y
YELLOW
44
R
B
www.johnguest.com
1/4"
5/16"
3/8"
4mm
6mm
TUBE ID
TUBE OD
1/2
8mm
10mm
12mm
15mm
TUBE ID
CHEMICAL RESISTANCE
PNEUMATICS APPLICATIONS
TUBE TOLERANCES
1/4" to 1/2"
4mm to 6mm
8mm to 12mm
15mm
+0.001/-0.004"
+0.05/-0.07mm
+0.05/-0.10mm
+0.10/-0.10mm
www.johnguest.com
45
NEW
NEW PRODUCTS
PRODUCTS
SERVICE AND REPAIR KIT
PART
PAR
T NO.
KIT-ISRK
DESCRIPTION
BOX QTY
CONTRACTOR PAK
The Lead-Free Push-Fit Solution
LEAD
REEEE
FFR
PART
T NO.
SIZE
CONTRACTOR PAK
Contents: (5) 1/2 Couplers
(5) 3/4 Couplers
(5) 1/2 Elbows
PEI-CONPAK
9 X 11 X 10D
PEI0428
PEI0428
PEI0320
PEI0328
PSEI4620
PSEI4628
DESCRIPTION
BOX QTY
5
5
5
5
10
5
FLEXI HOSE
46
46
www.johnguest.com
Technical Checklist
TECHNICAL CHECKLIST FOR INCH SIZE QUICK
CONNECT FITTINGS LISTED ON PAGES 31-46.
Working Pressure and Temperature
Range for PP Fittings.
Water
Tube Types
Tube Tolerances
5/32 - 3/16
1/4 - 1/2
+0.001 / -0.003
+0.001 / -0.004
Size (mm)
4mm - 5mm
6mm - 22mm
Tolerance (mm)
+0.05 / -0.07
+0.05 / -0.10
Tolerance (inches)
Chemicals
Collet Covers
Maximum Torque
3/8 - 1/2
Responsibility of Use
Side Load
Food Quality
1/8 - 1/4
3/4
1.0ft lbs
2ft lbs
3ft lbs
1.5Nm
3.0Nm
4.0Nm
www.johnguest.com
47
Fo
AVAILABLE FROM:
984642/08/14