Beruflich Dokumente
Kultur Dokumente
QUESTION NO: 1
When attempting to use the Access Gateway functionality to attach blade servers to your existing
fabric, you are unable to successfully set the switch to Access Gateway mode.
Which requirement must be met to enable Access Gateway mode?
A. Ensure the switch has an Access Gateway license installed.
B. Ensure all Ports on Demand licenses are installed.
C. Ensure the switch is licensed for Extended Fabric.
D. Ensure all ports are enabled.
Answer: B
Explanation:
QUESTION NO: 2
Which three switches support Access Gateway mode running Fabric OS v7.0? (Choose three.)
A. Brocade 5100
B. Brocade 5300
C. Brocade 6510
D. Brocade 8000
E. Brocade DCX
Answer: A,C,D
Explanation:
QUESTION NO: 3
Which three statements about Advanced Performance Monitoring features on switches in Access
Gateway mode are true? (Choose three.)
A. EE monitors are supported on switches in Access Gateway mode.
B. Top Talker monitors are supported on switches in Access Gateway mode.
C. EE monitors must be installed on E_Ports.
D. Frame monitors can be installed on F_Ports and N_Ports.
E. Frame monitors are supported on switches in Access Gateway mode.
"Certification With Money Back Assurance; - TestBells.com
QUESTION NO: 4
You want to form an F_Port trunk between a Brocade Fibre Channel Host Bus Adapter (HBA) and
a Brocade Fibre Channel switch.
Which three actions allow the trunk to form? (Choose three.)
A. Install the Server Application Optimization (SAO) license on the switch.
B. Install the trunking license on the server.
C. Set the ports to operate at the same speed.
D. Connect both adapter ports to different port groups on the switch.
E. Configure the trunk areas on the switch.
Answer: A,C,E
Explanation:
QUESTION NO: 5
Target Rate Limiting can be implemented on which two Brocade adapters shown in the exhibit?
(Choose two.)
A. A
B. B
C. C
D. D
Answer: B,D
Explanation:
QUESTION NO: 6
You are asked to attach a Brocade 6510 into an existing 16 Gbps Brocade fabric without adding
an additional Domain ID into the existing fabric.
Which advanced product feature should be used?
QUESTION NO: 7
You need to allow for multiple NPIV logins to a single port on a Brocade 6510.
On which port must NPIV be configured?
A. switch
B. HBA
C. device
D. Access Gateway
Answer: A
Explanation:
QUESTION NO: 8
What is the port type on an Access Gateway that connects to a Brocade 6510?
A. N_Port
B. F_Port
C. E_Port
D. G_Port
Answer: A
Explanation:
QUESTION NO: 9
What is the maximum number of NPIV logins an FC port can accommodate?
QUESTION NO: 10
Which three protocols do Brocade 1860 fabric adapters allow? (Choose three.)
A. FCoE
B. Native FC
C. TCP/IP
D. FCIP
E. FICON
Answer: A,B,C
Explanation:
QUESTION NO: 11
Which two statements are true about the zero-based area assignment port-addressing mode for
virtual fabrics? (Choose two.)
A. The mode allows for use of port blades with port indexes greater than 256.
B. The mode is compatible with domain, index zoning.
C. The area address of the first port assigned to the domain is set to zero.
D. The area address assignments are based on the port index.
Answer: A,C
Explanation:
QUESTION NO: 12
Which two statements are true about enabling the forward error correction feature? (Choose two.)
QUESTION NO: 13
You want to establish ICL trunking between platforms in the Brocade DCX 8510 family.
Which two statements are true? (Choose two.)
A. You can have a maximum of four ports in an ICL trunk.
B. You must use the four ports in the same QSFP to form a trunk.
C. You can have a maximum of 16 4-port trunks to a neighboring domain.
D. You must connect the QSFP cables to the same trunk group on each platform.
Answer: A,D
Explanation:
QUESTION NO: 14
You are attempting to set up an extended distance ISL between a Brocade DCX and a Brocade
300 platform. You have connected the cable but the link will not come up.
Which two settings need to be corrected in the exhibit to allow the ISL to form? (Choose two.)
A. Trunking
B. VC Link Init
C. Long Distance mode
D. port speed
Answer: C,D
Explanation:
QUESTION NO: 15
You are attempting to set up a two link trunk between the Brocade 5300 and Brocade 300
switches. You notice that the links are coming up as E_Ports and not as trunked ports.
Referring to the exhibit, which two changes need to be made on your Brocade 300 switch to allow
a trunk to form? (Choose two.)
A. VC Link Init
B. port grouping
C. ISL R_RDY
D. locked G_Port
Answer: B,C
Explanation:
QUESTION NO: 16
How many separate trunk groups will be formed between the Brocade DCX 8510-8 Backbones
shown in the exhibit?
A. 1
B. 2
C. 4
D. 8
Answer: C
Explanation:
QUESTION NO: 17
In the exhibit, if the master port goes offline, what will occur?
10
QUESTION NO: 18
You have decided to use trunking between a Brocade HBA and a Brocade switch in your fabric.
What must be configured to enable this?
A. a trunk area on the switch ports
B. a port area on the switch ports
C. a trunk area on the HBA ports
D. a port area on the HBA ports
Answer: A
Explanation:
11
QUESTION NO: 20
You need more bandwidth in your fabric and decide to implement trunking.
Which two statements are true? (Choose two.)
A. All of the ports in a trunk group must be configured for the same distance mode.
B. You do not need a Trunking license for each switch that participates in trunking.
C. All the ports in a trunk group may belong to different port groups.
D. All the ports in a trunk group must have the same encryption and compression settings.
Answer: A,D
Explanation:
QUESTION NO: 21
You are using in-flight encryption in your fabric and you want to implement trunking.
What is the maximum number of ports per trunk?
A. 2
B. 4
C. 8
D. 16
Answer: A
12
QUESTION NO: 22
You are preparing to implement F_Port trunking.
Which two statements are true? (Choose two.)
A. You can implement F_Port trunking between F_Ports on a Fabric OS switch and N_Ports on an
Access Gateway.
B. You can configure F_Port trunking on the F_Ports of an Access Gateway.
C. You can implement F_Port trunking between F_Ports on a Fabric OS switch and N_Ports on a
Brocade adapter.
D. You can configure F_Ports to be E_Ports with F_Port trunking on a Fabric OS switch.
Answer: A,C
Explanation:
QUESTION NO: 23
You are implementing two Brocade DCX 8510-8 backbones, a host with a dual port 16 Gbps
adapter, and a storage array. You are required to aggregate the host ports attaching to the fabric.
Which two satisfy these requirements? (Choose two.)
A. Brocade adapter
B. FCIP Trunking
C. F_Port Trunking
D. Extended Fabric
Answer: A,C
Explanation:
QUESTION NO: 24
With all necessary licensing in place,
13
which two types of trunking are used in the non-routed fabric shown in the exhibit? (Choose two.)
A. F_Port
B. ISL
C. EX_Port
D. ICL
Answer: A,D
Explanation:
QUESTION NO: 25
With all necessary licensing in place,
14
which two types of trunking are used in the non-routed fabric shown in the exhibit? (Choose two.)
A. F_Port
B. ISL
C. EX_Port
D. ICL
Answer: A,B
Explanation:
QUESTION NO: 26
Which license is required to enable all ICL connections between two Brocade DCX 8510-4
Backbones?
A. ICL 8-link
"Certification With Money Back Assurance; - TestBells.com
15
QUESTION NO: 27
Which two licenses are required to enable all ICL connections between two Brocade DCX 8510-8
Backbones? (Choose two.)
A. ICL 8-link
B. ICL 16-link
C. Inter Chassis Link (1st POD)
D. Inter Chassis Link (2nd POD)
Answer: C,D
Explanation:
QUESTION NO: 28
Which two licenses can be evaluated using a Time-Based license prior to purchasing? (Choose
two.)
A. Adaptive Networking
B. ICL
C. Ports on Demand
D. Trunking
Answer: A,D
Explanation:
QUESTION NO: 29
Referring to the exhibit,
16
which two port types are used between the two fabrics? (Choose two.)
A. E
B. EX
C. VE
D. VEX
Answer: C,D
Explanation:
QUESTION NO: 30
Which two port types are shown in the exhibit? (Choose two.)
A. E
B. F
C. N
D. VE
Answer: B,C
Explanation:
17
QUESTION NO: 31
Which two port types are used in the FC-FC routed fabrics shown in the exhibit? (Choose two.)
A. E
B. EX
C. VE
D. VEX
Answer: A,B
Explanation:
QUESTION NO: 32
You are using a Brocade 1860 Fabric Adapter to connect to FC SAN storage which is connected
to a Brocade DCX. Which two solutions allow connectivity between the server and storage?
(Choose two.)
A. Connect both Fabric Adapter ports to an FC8-32 blade in the DCX and enable Mixed-Mode on
the adapter ports.
B. Connect both Fabric Adapter ports to an FCoE10-24 blade in the DCX and enable Mixed-Mode
on the adapter ports.
"Certification With Money Back Assurance; - TestBells.com
18
QUESTION NO: 33
A host is located 100 km from a virtual tape subsystem target. The system architect implements
two tunnels across two different FCIP links connecting their pair of Brocade DCX 8510-8s for
redundancy. Which two changes will increase performance? (Choose two.)
A. Enable Tape Pipelining on both tunnels.
B. Enable Fastwrite on both tunnels.
C. Enable an MTU size of 9000 on both tunnels.
D. Enable 2048 simultaneous accelerated exchanges for the GbE port.
Answer: A,B
Explanation:
QUESTION NO: 34
An FCTrace of the FCIP links between two Brocade switches indicates that exchange commands
are being responded to on different FCIP tunnels with Fastwrite and OSTP enabled on the links.
What causes the exchange command and response to traverse the same tunnel?
A. port-based routing
B. in-order delivery
C. traffic isolation zones
D. frame redirection zones
Answer: C
Explanation:
QUESTION NO: 35
You are using a Brocade 1020 CNA to connect to IP storage and FC SAN storage which are both
connected to a Brocade DCX. Which solution allows connectivity between the server and storage?
"Certification With Money Back Assurance; - TestBells.com
19
QUESTION NO: 36
You have a security requirement to restrict which Fibre Channel end nodes can connect to your
fabric. Which policy satisfies this requirement?
A. FCS
B. DCC
C. SCC
D. IPFILTER
Answer: B
Explanation:
QUESTION NO: 37
You have a security requirement to restrict the switches that can join your fabric.
Which policy satisfies this requirement?
A. FCS
B. DCC
C. SCC
D. IPFILTER
Answer: C
Explanation:
QUESTION NO: 38
You have a security requirement to restrict the switches that can make changes to the
"Certification With Money Back Assurance; - TestBells.com
20
QUESTION NO: 39
You have been instructed to use a provided certificate to enable secure management access to
your fabric devices while also integrating logins with your current company infrastructure.
What would you use?
A. RADIUS
B. LDAP
C. RBAC
D. SNMP
Answer: B
Explanation:
QUESTION NO: 40
You need to prevent the addition of a new switch to the fabric as shown in the exhibit.
21
QUESTION NO: 41
You implemented an SCC policy in a fabric consisting of two Brocade 6510 switches:
switch:admin> secpolicycreate "SCC_POLICY", "2;4"
switch:admin> secpolicyactivate
You need to add a new Brocade 6510 switch to the fabric.
QUESTION NO: 42
You have recently implemented LDAP to make sure that administrators can access the Brocade
DCX 8510-8 using their Microsoft Active Directory accounts. You run the ldapcfg -maprole
DCX_8510 user command.
Which two statements are true for the members of the "DCX_8510" group in Active Directory?
(Choose two.)
A. They can display statistics using portstatsshow.
"Certification With Money Back Assurance; - TestBells.com
22
QUESTION NO: 43
You need to restrict the users who are allowed to access a new Brocade DCX 8510-8. The user
credentials and passwords must be centralized and identical on all Brocade DCX 8510-8s.
Which two configurations will achieve this? (Choose two.)
A. Configure LDAP authentication on all switches.
B. Configure LDAP authentication on the Principal switch.
C. Configure RADIUS authentication on the Principal switch.
D. Configure RADIUS authentication on all switches.
Answer: A,D
Explanation:
QUESTION NO: 44
You need to ensure that changes to the fabric can only be initiated from the switch in data center
DC1.
23
QUESTION NO: 45
Which two statements are true about Access Gateway N_Port failover? (Choose two.)
A. It changes the F_Port to N_Port mapping in the event of an F_Port link failure.
B. It changes the F_Port to N_Port mapping in the event of an N_Port link failure.
C. It changes the F_Port's FC address based on the new N_Port.
D. It changes the N_Port's FC address to match the F_Port address to allow non-disruptive
failover.
Answer: B,C
Explanation:
QUESTION NO: 46
What does Access Gateway mode provide?
A. gateway address for IP adapters
B. N_Port access to a fabric
C. additional edge switch domain access through E_Ports
D. zoning management for the fabric
Answer: B
Explanation:
QUESTION NO: 47
You are using ag --wwnmapshow to display static and dynamic mapping information about all
device WWNs connected to your Access Gateway.
What information does this command display? (Choose three.)
24
QUESTION NO: 48
You enabled Access Gateway on a Brocade switch in the default configuration.
Which two statements are true? (Choose two.)
A. Failover and failback policies are enabled on all N_Ports.
B. F_Ports are mapped to a set of predefined E_Ports.
C. Failover and failback policies are disabled on all N_Ports.
D. F_Ports are mapped to a set of predefined N_Ports.
Answer: A,D
Explanation:
QUESTION NO: 49
You need to establish connectivity between Server 1 and Storage 1.
25
QUESTION NO: 50
Referring to the exhibit, which statement is true for a server connected to port 1 of the Access
Gateway?
A. The server will lose connectivity if port 16 of the Access Gateway goes down.
B. The server will lose connectivity if port 17 of the Access Gateway goes down.
C. The server will failover to port 17 if port 16 of the Access Gateway goes down.
D. The server will failover to port 23 if port 17 of the Access Gateway goes down.
Answer: A
Explanation:
QUESTION NO: 51
Which feature is used when connecting a Brocade 6510 in Access Gateway mode to different
fabrics while maintaining device-to-fabric consistency?
A. Advanced Device Security
B. port mapping
C. failover
D. port grouping
Answer: D
Explanation:
QUESTION NO: 52
You notice that some N_Ports on a Brocade 6510 in Access Gateway mode are heavily used
while others are not. You want to balance the utilization.
26
QUESTION NO: 53
Which two statements about Access Gateway mode are true? (Choose two.)
A. It can connect NPIV-enabled HBAs.
B. It can aggregate multiple hosts to a connected F_Port uplink to a core fabric.
C. It can aggregate multiple targets to a connected F_Port uplink to a core fabric.
D. It can aggregate multiple hosts onto a single N_Port uplink to a core fabric.
Answer: A,D
Explanation:
QUESTION NO: 54
Which three advantages does trunking provide when in Access Gateway mode? (Choose three.)
A. It allows for quick reassignments of the port ID when N_Ports go offline.
B. It allows teaming to be enabled on Brocade HBAs.
C. It allows transparent failover and failback within the trunk.
D. It maximizes link utilization within the trunk.
E. It maintains in-order delivery when a link fails.
Answer: C,D,E
Explanation:
QUESTION NO: 55
Which two statements are true about Brocade trunking when connected to a Brocade switch in
"Certification With Money Back Assurance; - TestBells.com
27
QUESTION NO: 56
Which three devices are supported by a switch in Access Gateway mode? (Choose three.)
A. FICON channel
B. FCP initiators
C. FCP targets
D. fabric switches
E. iSCSI initiators
Answer: B,C,D
Explanation:
QUESTION NO: 57
Which two initialization stages must be completed to allow a host connected to an Access
Gateway (AG) device to send data frames through the fabric connected port? (Choose two.)
A. N_Ports perform the FLOGI command and the acceptance sequence with the fabric.
B. FDISC is used by the host to discover the AG.
C. FLOGI from the AG connected host is converted to FDISC by the AG.
D. FDISC is used by the AG device to discover the attached fabric.
Answer: A,C
Explanation:
QUESTION NO: 58
28
QUESTION NO: 59
Which two statements are true about Brocade Network Advisor? (Choose two.)
A. It can directly download firmware to storage arrays.
B. It can directly download firmware to Brocade CNAs.
C. It can directly update a third-party FC adapter device driver.
D. It can directly call home to Brocade support.
Answer: B,D
Explanation:
QUESTION NO: 60
You have been using Web Tools for configuring and monitoring your medium-size SAN.
Management is requiring you to improve security in your data center.
What must you do?
A. Disable Web Tools.
B. Configure the switch for Secure Socket Layer and use HTTPS to launch Web Tools.
C. Use a Keyboard Video Mouse (KVM) IP connected switch to connect to the serial ports on your
SAN switches.
D. Use a Brocade-branded cross-over USB cable to connect from the SAN switch to your
29
QUESTION NO: 61
You are discovering the edge fabric using Brocade Network Advisor 11.0.x.
Referring to the exhibit, which switch should be selected as the seed switch?
A. Brocade 7800
B. Brocade 300
C. Brocade 5100
D. Brocade DCX-4S
Answer: B
Explanation:
QUESTION NO: 62
Which management application changes your Brocade SMI integrated agent security settings?
A. Brocade Command Utility
B. Web Tools
C. Brocade Network Advisor
"Certification With Money Back Assurance; - TestBells.com
30
QUESTION NO: 63
You have encountered an issue with your Brocade Network Advisor 11.0.x client whereby the
topology view is not updating. You are going to escalate to your support provider.
QUESTION NO: 64
You need to collect data from your Brocade 6510. The data must be encrypted.
Which technology does this?
A. SNMPv3
B. IPv6
C. IPFilter
D. RPC
Answer: A
Explanation:
QUESTION NO: 65
You need to review Fabric Watch settings on a Brocade DCX 8510-4.
"Certification With Money Back Assurance; - TestBells.com
31
QUESTION NO: 66
You must manage the zoning on four Brocade DCX 8510-8 fabrics.
Which tool would you use?
A. Brocade Network Advisor Professional
B. Brocade Network Advisor Professional Plus
C. Brocade SAN Health
D. Brocade Network Advisor Enterprise
Answer: D
Explanation:
QUESTION NO: 67
You need to graph real-time data from various elements of your SAN using Brocade Network
Advisor. Which three objects can be graphed? (Choose three.)
A. EE monitor
B. NPIV device
C. FCIP tunnel
D. management network traffic
E. managed CNA traffic
Answer: A,C,E
Explanation:
32
QUESTION NO: 69
You have just run the free versions of the SAN Health Diagnostics Capture utility and SAN Health
Professional.
Which three critical tasks can you perform based on this report? (Choose three.)
A. taking inventory of devices, directors, and switches
B. display flows identified by Top Talkers
C. display end-to-end monitor results
D. capture and display historical performance data
E. assess performance statistics and error conditions
Answer: A,D,E
Explanation:
QUESTION NO: 70
You have been asked to collect real-time performance data on the 8 Gbps ISLs within your fabric
to troubleshoot problems being reported by users.
Which two tools capture this data? (Choose two.)
A. DCFM
B. SAN Health
C. NET Health
D. Brocade Network Advisor
33
QUESTION NO: 71
Several different application owners have complained that they are having performance issues
with their applications.
Referring to the output shown in the exhibit, which statement is true regarding this storage port?
A. The port has a congestion bottleneck.
B. Host multipathing is not in use.
C. The port is using the wrong fill word type.
D. The SFP in this port is malfunctioning.
Answer: A
Explanation:
QUESTION NO: 72
You want to install Top Talkers in your fabric.
Which two modes can you configure? (Choose two.)
A. port
B. fabric
C. device
D. filter
Answer: A,B
Explanation:
QUESTION NO: 73
You believe you have a server that is timing out. In Fabric OS v7.0 you want to find discarded
frames due to timeout reasons.
34
QUESTION NO: 74
You are having congestion problems on your Fabric OS v7.0 fabric and want to locate the Top
Talkers on the ISLs and the F_Ports at the same time.
Which monitoring utility would you use?
A. APM
B. HCM
C. NET Health
D. SAN Health
Answer: A
Explanation:
QUESTION NO: 75
You need to see real-time performance information from both Brocade DCX 8510-8 Backbones
and Brocade 825 Host Bus Adapters using one tool.
Which tool would you use?
A. Brocade Network Advisor
B. Brocade Host Connectivity Manager
C. Advanced Performance Monitoring
D. Fabric Watch
Answer: A
Explanation:
35
QUESTION NO: 76
One of the storage ports on your new Brocade DCX 8510-4 is heavily loaded. This port is shared
among multiple servers connected to the same Brocade DCX 8510-4. You need to determine
which server is causing the load on the storage port.
Which tool do you use?
A. Top Talker in fabric mode
B. Top Talker in port mode
C. portstatsshow command
D. Fabric Watch
Answer: B
Explanation:
QUESTION NO: 77
For planning purposes, you need to provide a monthly analysis of ISL traffic to your management.
Which tool will help you?
A. Fabric Watch
B. Web Tools
C. Brocade Network Advisor
D. Top Talkers
Answer: C
Explanation:
QUESTION NO: 78
Which two statements are true about traffic isolation (TI) zones? (Choose two.)
A. Domain controller ports are included in the TI zone.
B. E_Ports and F_Ports are included in the TI zone.
"Certification With Money Back Assurance; - TestBells.com
36
QUESTION NO: 79
Which two statements are true about QoS? (Choose two.)
A. Enables traffic isolation zones for traffic.
B. Enables in-order delivery on the E_Port.
C. Enables traffic flow prioritization.
D. Takes priority over ingress rate limiting.
Answer: C,D
Explanation:
QUESTION NO: 80
Which two statements are true about QoS zone-based traffic prioritization? (Choose two.)
A. Disabling QoS is potentially disruptive to traffic on the affected port.
B. It is enforced on egress ports only.
C. It is supported on FCoE devices.
D. It is supported in redirection zones.
Answer: A,B
Explanation:
QUESTION NO: 81
You need to identify the devices which are using the greatest percent of bandwidth on an ISL of a
Brocade 6510.
Which tool determines the high-bandwidth devices?
A. Host Connectivity Manager
"Certification With Money Back Assurance; - TestBells.com
37
QUESTION NO: 82
You want to use QoS to define the traffic priority in your mixed speed fabric. You use the
zonecreate "QOSL2_ora_prod", "10:00:00:00:30:00:00:00;50:00:00:00:40:a1:37:02" command.
Then you save and enable the new configuration to the fabric.
What are two ways this process will affect the devices listed in the command? (Choose two.)
A. The devices will be given a lower priority than non-QoS devices using the same path.
B. The devices will be given a higher priority than non-QoS devices using the same path.
C. The device priority will not be changed compared to non-QoS devices using the same path.
D. The traffic between these two devices will be affected when the link becomes saturated.
Answer: A,D
Explanation:
QUESTION NO: 83
Which two statements about TI zones over FC routers are true? (Choose two.)
A. Traffic isolation zones failover mode must be enabled in the edge fabrics and backbone fabric.
B. Traffic isolation over FC-FC routing is supported from edge fabric to edge fabric.
C. Traffic isolation zones failover mode must be disabled in the edge fabrics.
D. Traffic isolation over FC-FC routing is supported from backbone devices to edge devices.
Answer: A,B
Explanation:
QUESTION NO: 84
You are asked to set up TI zones over FCR to provide a dedicated path between Host 1 in edge
"Certification With Money Back Assurance; - TestBells.com
38
Referring to the exhibit, which traffic isolation zone should be implemented on Edge fabric 1?
A. "1,9; 1,1; 2,4; 2,-1"
B. "4,8; 4,5, 1,-1; 4,-1; 10:00:00:00:00:02:00:00"
C. "4,8; 4,5, 1,-1; 6,-1"
D. "1,9; 1,1; 2,4; 2,7; 10:00:00:00:00:08:00:00; 10:00:00:00:00:02:00:00"
Answer: C
Explanation:
QUESTION NO: 85
Which two statements are true for bottleneck detection? (Choose two.)
A. F_Port and E_Port trunks are supported.
B. Long distance E_Ports are not supported.
C. Access Gateway mode is supported.
D. FCoE VF_Ports are not supported.
Answer: A,C
Explanation:
39
QUESTION NO: 87
Your SAN requires proactive monitoring and prevention of link congestion.
Which two Brocade Fabric OS features, when combined, can provide this functionality? (Choose
two.)
A. bottleneck detection
B. admin domains
C. virtual fabrics
D. ingress rate limiting
Answer: A,D
Explanation:
QUESTION NO: 88
A new system has been deployed requiring that data flows from two servers to their storage
targets to be given high priority. Congestion problems of one of the flows must not affect the other.
40
Referring to the exhibit, which zoning configuration will guarantee this behavior?
A. 1
B. 2
C. 3
D. 4
Answer: C
Explanation:
QUESTION NO: 89
You have deployed Top Talkers in your fabric. You have chosen to use Fabric mode.
Which two statements are true? (Choose two.)
A. Top Talker monitors are installed on all F_Ports in the fabric.
B. Top Talker monitors are installed on all E_Ports in the fabric
C. End-to-End monitors must be removed from the switches.
D. End-to-End monitors must be installed on the switches.
41
QUESTION NO: 90
What is the maximum number of Virtual Channels (VCs) that are used when traffic is flowing for
the QoS zoning configuration shown in the exhibit?
A. 1
B. 2
C. 3
D. 4
Answer: C
Explanation:
QUESTION NO: 91
You have decided to enable ingress rate limiting on a port in your SAN.
Which two statements are true? (Choose two.)
A. The port must be disabled and then enabled before the feature will take effect.
B. You must specify the rate limit.
C. The rate limit will dynamically adapt to the congestion level on the port.
D. Enabling ingress rate limiting on the port is non-disruptive.
Answer: B,D
"Certification With Money Back Assurance; - TestBells.com
42
QUESTION NO: 92
To provide a required service level to a customer, you must configure traffic isolation zones.
Which statement is true?
A. A mix of WWN, domain, and index format zoning may be used.
B. WWN-based zoning may be used.
C. Domain and index format zoning must be used.
D. F_Ports are optionally included in the traffic isolation zone.
Answer: C
Explanation:
QUESTION NO: 93
Traffic prioritization is enforced on which ports?
A. M_Ports
B. D_Ports
C. ingress ports
D. egress ports
Answer: D
Explanation:
QUESTION NO: 94
You want to implement Traffic Isolation (TI) zones in your SAN.
Which statement is true?
A. The TI zones modify the route table.
B. The TI zones modify the link cost for traffic on the path.
C. The TI zones set the QoS traffic for the path.
"Certification With Money Back Assurance; - TestBells.com
43
QUESTION NO: 95
The Adaptive Networking license only activates which two features? (Choose two.)
A. bottleneck detection
B. QoS ingress rate limiting
C. HBA target rate limiting
D. QoS SID/DID traffic prioritization
Answer: B,D
Explanation:
Topic 2, Volume B
QUESTION NO: 96
In the exhibit,
44
QUESTION NO: 97
Referring to the information shown in the exhibit,
45
QUESTION NO: 98
Referring to the exhibit,
which two statements are true regarding FC-FC routing? (Choose two.)
A. Switch 3 can have a maximum of two front domains.
B. Switch 3 can have a maximum of two translate domains.
C. LSAN zones on Switch 2 and Switch 3 must have the same name.
D. Switch 1 and Switch 4 fabric IDs must match.
Answer: B,D
Explanation:
QUESTION NO: 99
When using Brocade Network Advisor to manage device sharing with FC-FC routing, which two
statements are true? (Choose two.)
"Certification With Money Back Assurance; - TestBells.com
46
47
48
49
50
51
52
which two long-distance solutions will accomplish FC-FC routing and minimize the impact of failed
connectivity between the Brocade 7800s on the SAN devices at each remote end? (Choose two.)
A. Port A= EX_Port Port B = E_Port Port C= E_Port Port D = EX_Port
B. Port A= E_Port Port B = VEX_Port Port C= VE_Port Port D = E_Port
C. Port A= EX_Port Port B = VE_Port Port C= VE_Port Port D = EX_Port
D. Port A= EX_Port Port B = VE_Port Port C= VEX_Port Port D = EX_Port
Answer: A,C
Explanation:
53
When configuring device sharing in this edge-to-edge environment, which two additional
conditions must occur to allow the translate domains to come online? (Choose two.)
A. the LSAN zones are defined and activated
B. the physical devices are online
C. the EX_Ports come online
D. the FIDs are configured
Answer: A,B
Explanation:
54
55
When you connect the cable between Switch 1 and Switch 3, as shown in the exhibit, the
connection segments.
What is the cause?
A. The front Domain ID is set incorrectly.
B. The fabric ID is set incorrectly.
C. The EX_Port is administratively disabled.
D. FC-FC routing must be enabled on Switch 3.
Answer: B
Explanation:
56
57
58
Given the switch output shown in the exhibit, what is the cause?
A. The LSAN zone in the edge fabric is incorrect.
B. Sharing devices from the backbone fabric is not supported.
C. Storage B has not been imported into the edge fabric.
D. A regular zone with Host A and Storage B as members is required.
Answer: C
Explanation:
59
60
61
62
63
64
65
66
67
68
Referring to the exhibit, how many FCIP circuits have been created?
A. 2
B. 3
C. 4
D. 6
Answer: C
Explanation:
69
70
71
72
73
74
on which two ports can you configure bottleneck detection? (Choose two.)
A. Port 1
75
76
77
78
79
80
81
82
83
84
85
Referring to the exhibit, which two statements are true? (Choose two.)
A. Edge fabric A will segment from edge fabric B briefly while a new trunk master is determined.
B. Edge fabric A will not segment from the backbone fabric.
C. The IFLs to edge fabric A will speed negotiate down to 8 Gbps for bandwidth matching.
D. The IFLs to edge fabric A will continue at 16 Gbps.
Answer: B,D
Explanation:
86
87
88
89
90
91
92
93
94
95