Beruflich Dokumente
Kultur Dokumente
SCREEN 2711P-T6C20D8
CWL-600 n1034
DESCRIPTION OF SCREENS
1. SCREEN INSTRUCTIONS
1) Check all safety closures are closed.
2) Turn ON the line and mains switch.
3) Connect the air pressure.
4) Reset the machine using the reset button under the screen. If there is not anything wrong,
the screen will display the welcome screen.
Here is an explanation about the different menus and pushbuttons that the user will find
in the following screens:
Screen 1
The first screen is a welcome screen. It also displays the manufacturer details concerning to Carugil. This screen
leads the user to the main menu.
Screen 2
MODEL:
MANUAL:
ALARMS:
CUTTING:
TIMES:
Screen 3
Screen 4
From this screen you must press TERMINAL SETTINGS (F4). You will be able to see the IP
address and configurations.
Screen 5
Screen 6
Screen 7
From this screen, you could see your PLC IP address (130.130.130.17). If not, please, select
EDIT DEVICE.
Screen 8
From this
Screen 9
Screen 10
Screen 11
Screen 12
Pantalla 13
Press OK.
Screen 14
Now, you can see the correct Screen IP. Press CLOSE
Screen 15
Screen 16
Enter IP ADDRESS
Screen 17 to 22:
IP ADDRESS: 130.130.130.18
SUBNET MASK: 255.255.0.0
GATEWAY: It could be 0. It doesnt matter.
PRESS OK
Screen 23
Screen 24
Screen 25 & 26
Press CLOSE.
Screen 27
Screen 27
Press YES and the system will be restarted. After thar, if you go to Main Menu you could see
the correct configuration.
FINAL SETUP