Beruflich Dokumente
Kultur Dokumente
DATA SHEET
book, halfpage
M3D186
2N4403
PNP switching transistor
Product specification
Supersedes data of 1997 May 05
1999 Apr 23
Philips Semiconductors
Product specification
2N4403
FEATURES
PINNING
PIN
DESCRIPTION
collector
base
emitter
handbook, halfpage1
2
3
MAM280
Fig.1
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 134).
SYMBOL
PARAMETER
CONDITIONS
MIN.
MAX.
UNIT
VCBO
collector-base voltage
open emitter
40
VCEO
collector-emitter voltage
open base
40
VEBO
emitter-base voltage
open collector
IC
600
mA
ICM
800
mA
IBM
Ptot
Tstg
200
mA
630
mW
storage temperature
65
+150
Tj
junction temperature
150
Tamb
65
+150
1999 Apr 23
Tamb 25 C
Philips Semiconductors
Product specification
2N4403
THERMAL CHARACTERISTICS
SYMBOL
Rth j-a
PARAMETER
CONDITIONS
VALUE
UNIT
200
K/W
note 1
Note
1. Transistor mounted on an FR4 printed-circuit board.
CHARACTERISTICS
Tj = 25 C unless otherwise specified.
SYMBOL
PARAMETER
CONDITIONS
MIN.
MAX.
UNIT
IE = 0 mA; VCB = 40 V
50
nA
IC = 0 mA; VEB = 5 V
50
nA
DC current gain
IC = 1 mA
60
IC = 10 mA
100
100
300
ICBO
IEBO
hFE
IC = 0.1 mA
VCE = 2 V
IC = 150 mA
IC = 500 mA
VCEsat
VBEsat
collector-emitter saturation
voltage
base-emitter saturation voltage
20
IC = 150 mA; IB = 15 mA
400
mV
IC = 500 mA; IB = 50 mA
750
mV
IC = 150 mA; IB = 15 mA
950
mV
IC = 500 mA; IB = 50 mA
1.3
Cc
collector capacitance
IE = ie = 0; VCB = 10 V; f = 1 MHz
8.5
pF
Ce
emitter capacitance
30
pF
fT
transition frequency
MHz
40
ns
15
ns
rise time
30
ns
toff
turn-off time
350
ns
ts
storage time
300
ns
tf
fall time
50
ns
ton
turn-on time
td
delay time
tr
1999 Apr 23
Philips Semiconductors
Product specification
2N4403
MGD812
300
hFE
VCE = 1 V
200
100
0
101
10
102
VBB
RB
oscilloscope
VCC
RC
Vo
(probe)
450
(probe)
450
R2
Vi
DUT
R1
MGD624
1999 Apr 23
oscilloscope
IC mA
103
Philips Semiconductors
Product specification
2N4403
PACKAGE OUTLINE
Plastic single-ended leaded (through hole) package; 3 leads
SOT54
E
d
L
b
1
e1
3
b1
L1
2.5
5 mm
scale
b1
e1
L1(1)
mm
5.2
5.0
0.48
0.40
0.66
0.56
0.45
0.40
4.8
4.4
1.7
1.4
4.2
3.6
2.54
1.27
14.5
12.7
2.5
Note
1. Terminal dimensions within this zone are uncontrolled to allow for flow of plastic and terminal irregularities.
OUTLINE
VERSION
SOT54
1999 Apr 23
REFERENCES
IEC
JEDEC
EIAJ
TO-92
SC-43
EUROPEAN
PROJECTION
ISSUE DATE
97-02-28
Philips Semiconductors
Product specification
2N4403
DEFINITIONS
Data sheet status
Objective specification
This data sheet contains target or goal specifications for product development.
Preliminary specification
This data sheet contains preliminary data; supplementary data may be published later.
Product specification
Limiting values
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or
more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation
of the device at these or at any other conditions above those given in the Characteristics sections of the specification
is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where malfunction of these
products can reasonably be expected to result in personal injury. Philips customers using or selling these products for
use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such
improper use or sale.
1999 Apr 23
Philips Semiconductors
Product specification
2N4403
NOTES
1999 Apr 23
Internet: http://www.semiconductors.philips.com
SCA63
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
115002/00/03/pp8