Beruflich Dokumente
Kultur Dokumente
OK 67.13
Classification
Classification
IS 5206: E 23.12 Cb B 20
IS 5206: E 25.20 R 26
DIN 8556: E 23 12 Cb B 20
DESCRIPTION
ESAB 309Cb is a basic coated stainless steel electrode giving austenitic weld deposit
of 23 Cr/12 Ni type containing columbium for immunity against weld decay. The CCb ratio is carefully controlled to provide stabilisation against intergranular corrosion
and higher strength at elevated temperature service of upto 1100C in continuous
service. ESAB 309Cb welds with a very smooth, quite and stable arc in all positions
with very little spatter. The slag system design allows for a fluid but controlled slag
and a slag cover that is easily detachable to reveal a shiny, smooth and even weld
bead.
DESCRIPTION
OK 67.13 is a medium heavy coated, semi basic type austenitic stainless steel
electrode depositing a 25 Cr, 20 Ni type weld deposit which has excellent stability
and oxidation resistance in continuous service upto 1100C. OK 67.13 has excellent
striking and restriking properties and do not run the problem of short-circuiting during
welding. The very smooth and quite arc in all positions coupled with a slag cover that
is self-detaching and a weldbead finely rippled and shiny contributes to its immense
welder appeal. The weldbead is of radiographic quality.
WELDING CURRENT: DC +
TYPICAL APPLICATIONS
ESAB 309Cb is especially designed for welding AISI 309, 309 Cb steels and joining
of dissimilar steels, stainless steel to mild steel, stainless steel to low alloy steel, for
root runs in clad steel joints, surfacing on mild steel to improve wear resistance,
building up on worn parts of wear resisting steels.
TYPICAL APPLICATIONS
OK 67.12 is used for the welding of heat resisting steels of 25 Cr / 20 Ni type such as
AISI 310 and Din werkst. Nr 1.4848, 1.4841, 1.4845, German steels like 4762, 4828,
4841, 4846 and 4848, cladding side of clad stainless steels, hydrogenation plants,
polymerisation plants, gas turbine combustion chamber components, high
temperature furnace parts, annealing boxes, carburising pots, armour plates and
welding stainless steels to unalloyed steels.
Ni 13.00
Nb 0.85
Si
0.70
0.015
Mechanical Properties
UTS
YS
EL (L=4d)
620 N/mm2
420 N/mm2
35%
0.020
350
40-70
3.15
350
80-100
4.00
350
100-150
5.00
350
140-180
Mechanical Properties
Si
0.50
UTS
580 N/mm2
Cr 26.0
0.015
YS
430 N/mm2
Ni
0.020
EL (L=4d)
35%
FERRITE
NIL
Mn
2.50
APPROVALS: RDSO
0.10
21.0
1.70
PACKING: Electrodes are packed in heat sealed plastic cartons and five of these
cartons are shrink wrapped in a cardboard box.
Size
(mm)
2.50
350
60-90
3.15
350
80-120
4.00
350
120-170
5.00
350
150-240
PACKING: Electrodes are packed in heat sealed plastic cartons and five of these
cartons are shrink wrapped in a cardboard box.
73
74