Beruflich Dokumente
Kultur Dokumente
Insulcretech (M2) is the building system that combines all the functions
required for residential, commercial and industrial projects.
Insulcretech (M2) system, when compared with other building methods,
surpasses all competitors. These benefits are:
High continuous thermal and acoustical insulation;
Structural resistance able to bear all sorts of stresses;
Horizontal and vertical curtain walls;
Waterproofing;
Greatly reduced insurance premiums;
Fire-resistant
Termite-proof
All these performing aspects are obtained thanks to the effiective
combination of its three components:
Expanded polystyrene;
Galvanized reinforcing steel;
Structural concrete.
ADVANTAGES
LIGHT
EXCELLENT
ACOUSTICS
RAPID ASSEMBLING
LOWER INSURANCE
FIRE RESISTANT
VERSATILE
CHOICE OF
FINISHES
TERMITE
RESISTANT
EARTH-QUAKE
RESISTANT
ENERGY SAVING
GREEN BUILDING
HURRICANE
RESISTANT
This technology of Italian origin has more than 30 years of history and boasts
more than 52 manufacturing lines installed all over the world in the most countries
such as Angola, Mexico, Guatemala, Costa Rica, Venezuela, Ecuador, Santo
Domingo, Panama, Argentina, Russia, Italy, Ireland, Spain, Bosnia, Egypt, Eritrea,
Nigeria, Mozambique, Libya, Saudi Arabia, Kurdistan (Iraq), Turkey, Reunion
Islands, Malaysia, Republica Dominicana, Philippines, Qatar AND USA.
SINGLE PANEL
As a load-bearing structure,
up to 4 stories buildings,
with structural plastering on
the two surfaces;
for partition walls and
curtain walls, in buildings
either new or to be restored;
for curtain walls and
partition walls in large
industrial and commercial
buildings;
as a permanent insulating
structural formwork for roofs
and floors of small-sized
spans, with or without precast ribs.
SINGLE PANEL HP
In order to meet even the
most particular
requirements, it is possible
to realize a special panel
made up of a double steel
wire electrowelded mesh on
each side. Although
maintaining the basic
features of the system, this
panel combines a
considerable structurality
with a resistance to
horizontal stresses, both
static an dynamic.
DOUBLE PANEL
It consists of two basic
panels, suitably shaped and
joined one another by
double horizontal
connectors, so as to leave
an empty space to be filled
with concrete, having
suitable characteristics and
strength. The thickness of
the concrete casting inside
the double panel as well as
the characteristics of the
concrete itself will be defined
according to the structural
requirements.
FLOOR PANEL
Used in the construction of large-sized span floors
and roofs by placing rebar steel in the spaces
molded for this purpose (bar joists) and them
placing concrete.
STAIRS PANEL
It consists of a foam
polystyrene block shaped
according to designing
requirements, coated with
two layers of steel wire
mesh assembled with
electrowelded wire. This
panel, suitably reinforced
and finished with casting on
site in the suitable spaces,
is used to build flights of
stairs. The stair panel is
characterised by its
extremely easy laying along
with its special structural
resistance and lightness.
MOUTING METHOD
MOUTING METHOD
MOUTING METHOD
MOUTING METHOD
MOUTING METHOD
MOUTING METHOD
MOUTING METHOD
MOUTING METHOD
Antarctica
Kingdom of
Saudi Arabia
Kingdom of
Saudi Arabia
Venezuela
Italy sport-center
external curtain walls
Argentina
Chile
India Kedarnath
at height of 14.000 ft.
United Kingdom
United
Kingdom
Ireland
Panama
Panama
M2 IN ANGOLA
Rua da Samba, n 318/320
T: +244.926.406.952
+244.924.160.082
+244.918.022.280
E: email@novaangospencer.com
For More Information Contact: