Beruflich Dokumente
Kultur Dokumente
The intent of the article is to show you how to bridge two networks of Windows
computers together using a single Windows (2000, XP, or 2003) machine on each
network running Hamachi with the Routed Tunneling feature.
Initial Setup
First, you need to have Hamachi set up and running on a computer on each
network. Ensure the status of each computer is green. Next, youll need to turn on
Routed Tunneling on both computers.
To do this, create a file called Hamachi-override.ini in
(Windows XP, Server 2003) c:\Documents
and Settings\<username>\Application
Data\Hamachi
as a string value equal to 1 in the registry. This will require a system reboot
to take effect. To confirm it is enabled, do ipconfig /all from the command line. IP
eRouter
should say yes. If not, confirm your registry setting and reboot
again. This setting is flaky in non-server versions of Windows.
Routing Enabled
You should now be able to ping the 172.16.x.x computer from the 192.168.1.x
computer using its real IP address and vice versa. If not, check your firewall settings.
Option 2: (not all routers support this, but it is the minimal configuration method)
On the router acting as the default gateway for 192.168.1.x network, add a static
route that says any traffic destined for 172.16.0.0 network go through 192.168.1.x
(IP address of Hamachi PC on 192.168.1.x network)
On the router acting as the default gateway for 172.16.x.x network, add a static
route that says any traffic destined for 192.168.1.0 network go through 172.16.x.x
(IP address of Hamachi PC on 172.16.x.x network)
Troubleshooting:
To be tested.